Provn of Ladies And Gents Toilet Near Central Parking SP Road and Spl repair of Bldg No T-34 at Area Account Office of HQ UKSA under GE Dehradun.

Amount

Excavation in trenches, n exc 1.5 mtr wide and n exc 1.5 mtr in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n exc 10 Sqm on plan and n exc 1.5 mtr in depth and getting out in hard/dense soil complete all as specified and as directed.

Material and labour PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) for fdn/ mass concrete complete all as specified and as directed.

Material and labour for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortor 1:6 complete all as specified and as directed.

Material and labour Brickwork with subclass ‘B’ bricks in cement mortar 1:4, straight or curved on plan to any radius in half brick thick walls complete all as specified and directed.

Material and labour cement concrete 1:2:4 type B0 (12.5mm graded stone aggregate) 40mm thick in Damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified.

Material and labour for 40mm Damp proof course in cement concrete course 1:2:4 type B0( using 12.5mm graded stone aggregate) to horizontal or vertical surfaces mixed with integral water proofing compound as per manufacturer instructions including necessary formwork complete all as specified and directed. Note:- Water Proofing Compound shall be measured and paid seperately.

Material and labour for RCC Type B-1, 1:2:4 nominal mix (using 20 mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified.

Material and labour for Providing precast cement concrete 1:2:4 nominal mix type B1 (using 20 mm graded stone aggregate) set in cement mortar 1:4 as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified.

Material and labour for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter flat rough finished surfaces of concrete complete all as specified and directed.

Material and labour for Reinforced cement concrete (nominal mix) type A1 1:1.5:3 (20mm graded stone aggregate) as in Foundations, incl rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as spefied and directed.

Material and labour for Formwork to sides of pillars, posts, struts, piers, columns and stanchions square, rectangular or polygonal for rough finished surfaces of concrete complete all as specified and directed.

Material and labour for Reinforced cement concrete (nominal mix) type A1 1:1.5:3 (20mm graded stone aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and directed.

Material and labour for Formwork to sides and soffits of floor or roof beams, beam aunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. flat rough finished surfaces of concrete complete all as specified and directed.

Material and labour for Reinforced cement concrete (nominal mix) type A1 1:1.5:3 (20mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

Material and labour for Formwork to chullah hoods, cha jjas, troughs and similar items in cluding edges, flat rough finished surface of concrete complete all as specified.

Material and labour for Reinforced cement concrete (nominal mix) type A1 1:1.5:3 (20mm graded stone aggregate) as in Chajjas complete all as specified and directed.

Material and labour for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) flat rough finished surface of concrte

Material and labour for Reinforced cement concrete (nominal mix) type A0 1:1.5:3 (12.5mm graded stone aggregate) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Supply only Liquid water proofing compound complete all as specified and as directed.

Providing & fixing false ceiling of Designer tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) in true horizental level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grms, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and croos 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600mm and secondary cross "T" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable wire of 4mm dia with galvanised butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 4mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width, including taking down existing ceiling of any type all complete at all heights as per direction of Engineer-in-Charge.

Supply and fix in repair 20 mm dia stainless steel polished 204 grade drapery rod 1mm thick with final decorative, including brackets, decorative nobs at both ends complete all as speccified and directed.

Material and labour TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour TMT bars 06 to 08 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

All as per ser item No 23 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.

Material and labour Formwork flat rough finished to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide. (Where RCC/PCC band in walls, spanning and openingcomplete all as specified.

Material and labour for rendering 15 mm thick on brick work or concrete surfaces in cement mortar (1:4), finished surfaces even and smooth complete all as specified and as directed.

Material and labour for rendering 15 mm thick on brick work or concrete surfaces in cement mortar 1:6, finished surfaces even and smooth complete all as specified and as directed .

Material and labour for preparation of newly plastered surface of wall and applying two coat of cement base painting after priming with alkali-resistant priming paint complete all as specified and directed.

Material and labour for preparation of newly / old plastered surfaces of wall and applying two coats of oil bound distemper by roller over a coat of primer complete all as specified in SSR Part I and directed by Engr-in-Charge.

Material and labour for moorum / red bajari filling in floors or pavings, laid in layers n exc 15 cm thick, spread, levelled and rammed including watering and duly consolidating complete all as specified and directed.

Material and labour for hardcore of gauge exc 63 mm but n.exc 100 mm deposited, spread and leveled in layers n.exc 15 cm thick, watered and rolled/rammed to a true surfaces in broken stone or boulder complete all as specified and as directed.

Material and labour Hardcore of broken stone gauge exc 40mm but n exc 63mm deposited, spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.

Material and labour 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone agg) as in sub base complete all as specified and as directed by the Engr-in-Charge.

Material and labour for cement concrete type B-1 1:2:4 (20 mm graded stone aggregate) 25 mm thick as in floor finish complete all as specified and as directed .

Material and labour for PCC 1:4:8 type D2 (using 40mm graded stone aggregate), 75 mm thick as in sub base complete all as specified and as directed.

Material and labour non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 400 mm x 400 mm x 6- 7 mm thick as in floor, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 and dismantling of existing tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.

Material and labour for coloured digital ceramic tiles in vertical surface as in walls, dado, etc. 300 x 600 x 8-10mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in CM (1:3) complete all as specified and as directed.

Material and labour for Vitrified Ceramic tiles Dark shed /double charged 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors,skirting etc. including screed bed 15 mm thick in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile including dismantling complete all as specified and as directed.

Material and labour for 75 mm thick PCC 1:3:6 type C-1 (using 20 mm graded stone agg) as in plinth protection complete all as specified and as directed.

Material and labour for providing 75 mm thick cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection even and smooth with using extra cement complete all as specified and as directed.

Supply and fix steel window with side hung shutters including box type hinges with steel handle and steel peg stay, complete without glazing bars, dovetailed or welded including taking down old existing window complete all as specified and directed.

Supply and fix steel window with side hung shutters including box type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded including taking down old existing window complete all as specified and directed.

Supply and fix factory made steel ventilator with top hung shutters including hinges with steel handle, steel peg stay, tower bolt etc.complete all as specified and as directed.

Material and labour sheet glass ordinary quality 4mm thick and glazing with oil putty or fixed with bead/ glazing pins in squares n.exc. .5 sqm each pane all corner of glass to be fixed with silicon complete all as specified and directed.

Supply and fix factory made 100% solid wood plastic composite (WPC) door frame of size 75 mm x 50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cubic metre from ISO certified company door should be water proof termite proof fire retardant and having good screw holding capacity all as specification and drawing complete all as specified and directed by Engr-in-Charge.

Supply and fix 24 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side plain with density not less than 600 Kg/Cubic metre. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw holding capacity by Engr-in-Charge.

Supply and fix 150 mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and as directed by Engr-in-Charge.

Supply and fix stainless steel barrel tower bolts 150 mm long one piece and fixed complete all as specified and as directed.

Supply and fix 150 mm long Aluminium anodised handles of fabricated type complete all as specified and as directed by Engr-in-Charge.

Supply and fix stainless steel handles 150 mm long one piece and fixed with screws/welded to frame , complete all as specified and as directed.

Supply and fix Butt hinges 100 mm size medium weight cold rolled stainless steel and fixed complete all as specified and as directed by Engr-in-Charge.

Supply and fix 300 mm long stainless steel sliding door bolt (bolt not less than 12 mm dia) with hasp & staple and fixing clips of SS sheet, and SS fixing bolts and fixed complete all as specified and as directed.

Supply and fix for mild steel framed work such as door frames, grills, gratings, etc, with ends of bars shouldered and / or riveted or forged into spikes; framed guard bars; frame work of water tanks and similar work confirming to Fe-290 Gde-E-165 including necessary welding, drilling hole complete all as specified and directed.

Supply and fix Pressed steel frames of size 125x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed. [(Note: frame filled in cement concrete1:2:4 type B0 ( 12.5 mm stone aggregate)]

Material and labour for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description over 10 cm width or girth & complete all as specified and directed.

Supplying, fixing, jointing and testing galvanised steel water tubing 15 mm dia bore medium grade with all fittings such as bends, tees, nipples, elbows, socket reducers, etc, fixed to walls and ceilings or laid in floors complete all as specified and directed.

Supplying, fixing, jointing and testing galvanised steel water tubing 20 mm dia bore medium grade with all fittings such as bends, tees, nipples, elbows, socket reducers, etc, fixed to walls and ceilings or laid in floors complete all as specified and directed.

Material and labour cutting chases for concealed water tubing or concealed conduit wiring, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges, etc., cutting not exc 10 cm width or girth complete all as specified & directed.

Supply and fix Vitreous China Urinals, half stall type white (back or corner wall type), complete including providing and fixing plugs, bedding urinals against wall in CM 1:2, securing urinals to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, CP waste coupling, waste pipe, automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete. complete all as specified and as directed by Engr-in-Charge.

Supply and fix in repair vitreous china, white, oval shape wash hand basin, table top flat size 550mm x 400 mm including MS brackets including 12 to 15mm thick prepolished mirror granite fixed on RCC slab 1:2:4 type B1, 50mm thick with steel reinforcementcutting for and pinning in ends of brackets but excluding Waste pipe & with 32mm (PTMT) waste coupling (half or full threaded) minimum weight 32gm-45gms) & 15mm bore CP pillar tap supply only 25mm dia PVC (LDPE) of pressure 6Kg/cm2 down pipe 75cm long complete all as specified and directed. (Note : RCC and reinforcement shall be measured and paid separately)

Material and labour 18 to 20 mm thick Granite(of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick cement screed in CM 1:6 complete all as specified

Supply and fix in repair CP Health Faucet with 1.20 mtr metalic expandable tube & hook complete all as specified and directed.

Supply and fix in repair vitreous China wash down (EWC) water closet pan(pedestal pattern), white including flushing cistern and flush pipe , including seat and cover white for pedestal pattern complete all as specfied and directed.

Supply and fix in repairs vitreous china water closet (squatt pan) orrisa pattern 580mmx440 mm size pan white with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to 'flushing cistern/pipe complete all as specified and directed including 100mm dia CI 'P' trap of 60cm long complete all as specified and directed by Engr-in-Charge.

Supply and fix 10 litres capacity PVC low level valve less symphonic action type flushing cistern white with inlet, float valve, float and handle including brackets with 32 mm dia PVC pipe 600 mm long complete all as specified and as directed by Engr-in-Charge.

Supply only PVC connection 15 mm dia 450 to 600 mm long with brass fly nut at both ends complete all as specified and as directed.

Supply and fix 1000 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, including supply & fix 20 mm dia GI light grade wash out pipe 450 mm long with plug and 20 mm dia GI light grade over flow pipe 600 mm long with fitting complete all as specified.

Supply & fixing ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size complete all as specified.

Supply and fix 20 mm bore Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

Supply and fix Vitreous China wash hand basin, white, flat back type of size 550mm x 400 mm fixed on and including cast iron cantilever bracket, 32 mm dia brass waste coupling and 32 mm dia PVC waste pipe, grating dome, etc including fixing of tap, waste fitting etc complete all as specified and as directed. Note: Pillar tap shall be measured as supply only under respective item.

Supply and fix 15mm dia swan neck pillar tap (for oval type WHB) brass chromium plated with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, and fixed complete all as specified and as directed by Engr-in-Charge.

Supply and fix brass chromium plated angle cock 15 mm dia screwed for iron pipe or brass ferrule complete all as specified and as directed.

Supply and fix 15 mm bore bib taps, chromium plated cast copper alloy long body, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

Supply and fix Chromium Plated brass soap dish fixed to wall with chromium plated brass screwed and cup washer complete all as specified and directed.

Supply and fix brass chromium plated towel rail, 20 mm dia 'D' type 60 cm long between flanges complete all as specified and directed.

Material and labour PVC (SWR) floor trap plain with grating including jointing with solvent cement 75 mm bore outlet complete all as specified and as directed.

Supply and fix PVC (SWR) soil waste & vent pipe in any length without ears laid in floors, trenches or fixed to wall complete for 75 mm dia bore of pipe complete all as specified and as directed.

Supply and fix PVC (SWR) soil waste & vent pipe in any length without ears laid in floors, trenches or fixed to wall complete for 110 mm dia bore of pipe complete all as specified and as directed.

Supply and fix PVC (SWR) bends, T, reducer any radius with rubber ring joints, fixed to wall / floor / in trenches complete all as specified and directed for 75 mm dia pipe complete all as specified and as directed.

Supply and fix PVC (SWR) bends, T, reducer any radius with rubber ring joints, fixed to wall / floor / in trenches complete all as specified and directed for 110 mm dia pipe complete all as specified and as directed.

Supply and fix 110 mm dia PVC (SWR) vent cowl complete all as specified and as directed.

Supply and fix Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410-W(Gde E-250) quality-A complete all as specified and as directed.

Supply and fix pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-in-Charge.

Supply and fix pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

Returning filling in including spreading levelling watering and well ramming in layers not exc 25 cm complete all as specified and as directed by Engr-in-Charge.

Removing excavated material n.exe 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed

Material and labour Sand filling under floors or in foundations or including watering and consolidation complete all as specified and directed

Material and labour grinding and polishing to edges and rounding of granite kota or marble slab and smooth finishing complete all as specified and as directed

Supply and fix 35mm thick second class hardwood (Golden Teak) glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed.

Supply and fix 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and as directed.

Supply and fix stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed.

Supply and fix powder coated aluminium anodised door with frame and shutter, and glazing 5.0 mm thick transparent acrylic sheet and bottom 6.0mm ACP sheet encluding jointing clip, neoprin beading aluminum glazing clips (beeding), mortice lock 100mm, aluminium door stopper cleat,two no powder coated aluminum tower bolt 200mm long,powder coted handle 150mm long incuding all necessary fitment and directed , section of aluminium door shall be of following sizes: - Top rail;- 85x44x1.40 mm thick fixed with rawal plug width rail ;- 85x44x1.40 mm thick Bottom rail ;- 100x44.5x1.40 mm thick Middle rail;- 100x44.5x1.40 mm thick Glazing beading;- 0.70 mm thick Aluminium handle 'D' type ;- 150mm Aluminium tower bold 9.9 mm dia shoot 200 mm long Mortice lock stainless steel - 100 mm 4 lever Aluminium stopper cleat aluminium hinges 100 mm long Note;- (i) Making good of wall surface with matching to existing surface complete all as specified ad directed (ii) PCC shall be measured and paid seperatelly Make: (i) Anodised aluminum section : Jindal / Hindalko / Indalco. (ii) Glass: Saint gobain / Modi guard / Tata

Supply and fix powder coated aluminium window three track window having three shutter on which two shutter are glazed and one shutter are gauged including rubbre beeding gasket, locking arragement, jointing clip of all necessary fitment complete all as specified and directed. aluminium sections shall be given below: - Frame;- 122x36x1.2 mm thick fixed with rawal plug Shuter frame;- 59x36 mm thick Glazing beading;- 0.70 mm thick Aluminium handle 'D' type ;- 100mm Aluminium tower bold 9.9 mm dia shoot 150 mm long Glass;- 5 mm thick frosted/ plain glass ( as directed) wire mesh Stainless steel of 0.063 mm nominal dia wire and average width of arperture 1.40 mm Aluminium stopper cleat aluminium hinges 100 mm long powder coated Make: (i) Anodised aluminum section : Jindal / Hindalko / Indalco. (ii) Glass: Saint gobain / Modi guard / Tata

Supply and fix powder coated aluminium anodised partition with frame, (fixed type) with aluminum glaging clip shanp beading of following sizes;- Frame of vertical/horizontal section;- 44.5x44.5x1.20 mm thick Bottuom section;-100x44.5x1.2 mm thick Complete all as specified and directed by the Engr in charge Make: (i) Anodised aluminum section : Jindal / Hindalko / Indalco. (ii) Glass: Saint gobain / Modi guard / Tata

Material and labour for 150 mm Salt-glazed stoneware drain pipes laid in trenches and jointed complete all as specified and as directed.

Material and labour for Concrete bed in 1:3:6 type C2 (using 40 mm graded stone aggregate) to 150 mm bore drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in complete all as specified and as directed.

Material and labour Precast RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in cover slab of man hole, septic tank, soak well etc set in cement mortar 1:4 complete all as specified and as directed.

Supply and fix mirror light decorative compact luminarious with decorative ends caps 9/10 Watt LED with all accessories and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fix decorative wall mounting made out of polycarbonated suitable for and incl retrofit 9 watts LED bulb complete all as specified and as directed.

Supply and fix hanging light for ceiling with adjustable cord length of 90 cm madeout of polycarbonated and incl retrofit 9 watts LED bulb complete all as specified and as directed.

Supply and fix Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete with lamp 6500/4000 K complete pre-wired all accessories complete all as specified.

Supply and fix Energy efficient LED tube light fitting box type with and incl retrofit 1x18W LED with connector etc complete pre-wired all accessories. Complete all as specified.

Supply and fixing LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp and incl bracket, clamp fastner, bolts, nuts & washers incl grouting etc and 3 core 1 sqmm PVC insulated cable from ceiling rose to light fitting complete all as specified

Supply and fix LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.

Supply and fix Lamp holder polycarbonate insulated body, with back plate with and incl LED lamp retrofit 9/10 watts complete all as specified and as directed.

Taking down carefully copper aluminum point wiring (light, fan socket and power) complete including switches, ceiling rose, lamp holder and regulator, light fitting etc and removing from site and making good to any disturbed surfaces of walls floors etc. as per existing specification complete all as specified and directed.

Material and labour for point wiring with 1.5 sqmm (Nominal Area)PVC insulated FRLS un sheathed multi stranded copper conductor drawn in and including non metalic rigid PVC concealed conduit of med grade of suitable size with all fitings and accessories including factory made MS pressed modular metal flush boxes with zinc coated duly concealed in wall including reqd as per site reqmt for mounting modular switches, sockets fan regulators etc including continuous earth wire PVC insulated 1.5 Sq mm FRLS copper conductor connecting to common earth and earth dolly complete all as specified (Note: Colour code shall be maintained as per IE rule).

One light point/ Fan point controlled by one, one way switch

One bell point controlled by one-one way switch.

One three pin 5 Amp socket on same board with other switches.

One three pin 5 Amp socket on independent board

All as per item No 109 here-in-before but with 2.5 Sqmm. (nominal area) cable for phase & neutral for one 3 Pin 15 amp socket on independent board including one 2.5 sqmm PVC insulated unsheathed multi stranded copper conductor cable FRLS,1100 volts grade as earth continuity conductor upto common earth & connected to earth dolly complete all as specified and directed by Eng.-in-charge.

Material and labour point wiring with 1.5 Sqmm including concealed PVC conduit medium grade including accessories along with continuous earth wire 1.5 Sqmm PVC insulatedfor one light point/Fan point controlled by one ,one way switch incl cutting chases and making good as per existing surface complete all as specified and as directed.

All as per Item No 111 mentioned here-in- before but one three pin 5 Amps socket out let on the same board with other switches with 1.5 sq mm PVC insulated copper conductor for continuous earthing complete all as specified and as directed.

All as per Item No 111 mentioned here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 sq mm PVC insulated copper conductor and 2.5 Sqmm copper conductor for continuous earthing complete all as specified and as directed.

Supply and fixing decorative polycarbonate modular white frame for fixing of switches and cover plate suitable for 8/12 modules 3 row and blanking plate if any required for spare module complete all as specified and as directed.

All as per item No 114 here-in-before but 6 module complete all as specified and as directed.

All as per item No 114 here-in-before but 3 module complete all as specified and as directed.

All as per item No 114 here-in-before but 1 or 2 module complete all as specified and as directed.

Supply and fix Modular switch 1 way 06 amp single pole complete all as specified and as directed.

Supply and fix Modular switch 1 way 16 amp single pole complete all as specified and as directed.

Supply and fix of modular socket outlet 16A-5 pin combined of 02 module complete all as specified and as directed.

Supply and fix of modular socket outlet 6A-5 pin combined of 02 module complete all as specified and as directed.

Supply and fix moduar bell push 6 Amp 1 module complete all as specified and as directed.

Supply and fix modular fan step regulator 120 W-2 module complete all as specified and as directed.

Supply and fix two module movement sensor of current carrying capacity of 6 Amps with rated voltage 240 Volts AC at 50 Hz and max load capacity of 100 watts for operating of lights, exhaust fans etc complete all as specified and as directed. Make :- Cona Cat Part No 9526 or equivalent in legrand of havells.

Supply and fix Switch piano flush button single pole one way 5 Amp complete all as specified and as directed.

Supply and fix Socket outlet, 5 Pin, 6 Amp 2 in 1, flush type, universal complete all as specified and as directed.

Supply and fix Socket outlet 2 in 1, 5 pin, 5 and 15 Amp flush type complete all as specified and as directed.

Supply and fix Switch piano flush button single pole one way 15 Amp complete all as specified and as directed.

Supply and fix Fan regulator stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as reqd complete all as specified and as directed.

Supply and fix calling bell, AC 230 Volt single pole complete all as specified and as directed.

Supply and fixing Ceiling rose, three terminal ISI marked surface bakelite suitable for batten fitting complete all as specified and as directed.

Taking down submain wiring of any size any type and in any position metalic/non metallic PVC conduit of wooden batten and making good the disturbed surface complete all as specified and directed.

Material and labour , sub main wiring with two single core PVC insulated unsheathed FRLS multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm size drawn in and including non metallic rigid PVC concealed conduit (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 6 Sqmm FRLS copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed.

Material and labour for Distribution board TPN DB 4 Way double door, for mounting MCBs isolator, ELCBs etc factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar complete all as specified and as directed.

Material and labour for Distribution board SPN 8 Way double door, for mounting MCBs isolator, ELCBs etc factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar complete all as specified and as directed.

Supply and fix MCB TPN 40 to 63 Amps, 240 Volts having braking capacity 10 KA complete all as specified and as directed.

Supply and fix MCB SP 6 to 40 Amp, 240 Volts, 'C' curve having breaking capacity 10 KA complete all as specified and as directed.

Supply and fix MCB SP 240 volts, 6 to 40 Amps, 'C' series 10 KA including connection with suitable size copper lugs complete all as specified and directed.

Supply and fix MCB SPN 40 to 63 Amps, 240 volts 'B' series 16 KA ,including connection with suitable size copper lugs complete all as specified and directed.

Supply and fix in replacement Sheet metal enclosure SPN with a two pin and earth plug and socket complete with one single pole MCB 20 Amp 10 KA C series complete all as specrified & directed

Supply and fix in repair, MCB DB, sheet metal enclosures double door SPN 8 way with 200 Amps rated bus bar 240 volts 2 in 1 shutter (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of 300 mm sweep complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, frame and louvers all as specified and directed by Engr-in- Charge.

Supply and fix wall mounted fan, plastic body AC single Phase. 230V of size 400 sweep complete all as specified and directed by Engr-in- Charge.

Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cable (Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area size 10 Sqmm 2 Core complete all as specified and as directed.

Supply and fix tube 'Light' grade galvanised with all fitting laid in trenches, fixed to wall and floor of 50 mm dia for cable protection complete all as specified and directed.

Bricks, old size sub class `B' laid in trenches with width wise along the alignment of the cable as protection complete all as specified and as directed.

Material and labour for earthing complete with galvanized steel plate electrodes of size 600mm x 600mm x 6mm thick buried directly in ground with earth pit not less than 2.25m deep below normal ground level with top edge of plate not less than 1.5 m below normal ground level connected to galvanized wire 4 mm earth lead by means of nuts bolts check nuts GI washers earth wire protected by galvanized iron pipe 15 mm bore (light grade) including concrete pit in PCC (1:3:6) type CI, precast RCC cover slab of size 30x30x10 cm with one handle for lifting made out of 8 mm dia MS bar funnel wire mesh 20 mm bore galvanized iron pipe (medium grade) for watering charcoal or coke and salt in alternate layers necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR part 1 including testing on completion all as specified and directed. incl demolition to existing one complete. Note: (i) Earthing has to done by spl persons and if the desired earth resistance is not found within permissible limit shall be redone by contractor at no extra cost. (ii) Cost of GI wire 4 sqmm and 15 mm dia pipe medium grade upto 7.5 mtr is included in the rate quoted for this item

M/S RAJESH AGARWAL

M/s Teg Singh Negi

M/s RP AGRAWAL