Planning, Designing and Execution of interior work for sitting of SIIC at NSTI Ludhiana

S NO DESCRIPTION AMOUNT AMOUNT

2.00 SANITARY/ PLUMBING WORKS 1,23,263.75 3,16,267.00

3.00 ELECTRICAL WORKS 8,80,530.00 14,82,348.00

5.00 WI-FI & LAN WORKS (ACTIVE & PASSIVE) 0.00 22,40,358.00

6.00 CCTV WORKS 2,69,280.00

8.00 FIRE ALARM & PA SYSTEM 2,51,417.00 8,866.00

10.00 FURNITURE 32,78,100.00

11 Signage 3,79,292.00

Total (DSR +MR) 1,48,99,000.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES-CIVIL

S NO DSR/MR DESCRIPTION QUANTITY UNIT RATE AMOUNT AMOUNT

1 FLOORING WORKS DSR RATE NON DSR

SOLID POLIMER COMPOSITE OR VENYLE FLOORING: Providing and Fixing of floor tiles with wear layer is of 0.5mm,

made upof Stone Polymer composite, 100% Water & Termite proof, Scratch/ Flame/ UV resistant, anti-microbial,

100% recyclable Green product having click system with suitable skirting. Classification of abrasion resistance

(Abrasion wheelfromH-18 Calibrade, loadApplied 1000 grams, No. of Cycles 14,400). " ( Along with Matching

VITRIFIED TILES: Providing and laying vitrified floor and wall tiles in different sizes (thickness to be specified by the

manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all

11.41A colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey

cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc.,

TOTAL FLOORING WORKS 17,973.00 6,30,000.00

2 FALSE CEILING WORKS

GYPSUM BOARD CEILING: Providing and fixing false ceiling at all height including providing and fixing of frame

work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120

gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick

with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash

fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of

25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with

intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the

ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5

mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with

connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter

channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to

wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval,

2.01 12.45 including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of

size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of

the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers

covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per

manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers,

cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and

direction of the Engineer in Charge but excluding the cost of painting with

12.45.1 12.5mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS 70.00 sq m 1355.8 94,906.00

2 Digitally signed by AMIT

Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design

and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ≥ 85%,Thermal

Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended

on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick level suspended on

interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick5x32mm of length 1200 mm

and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm

suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter

M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster

26.27 of size 85x25x2 mm, spaced at 1200 mmcentre to centre along main ‘T’. The system should rest on periphery

walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to

be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws.

The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with

polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per

directions of the engineer-in-charge.

26.27.2 With 20 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.7) 150.00 sq m 2671.2 4,00,680.00

Providing the gypsum double sided cove of 150mm x 150mm having a facia of 75mm to macth the

MR specifications same as above 25.00 Rm 865 21,625.00

TOTAL FALSE CEILING WORKS 4,95,586.00 21,625.00

3 WALL FINISHES WORKS

GLASS PARTITION Providing and fixing framedglass door/glass partition wherever required 10 mm thickness

3.01 MR including all fittings, frames etc. as per direction of EIC( Floor spring lock and handle paid seprately) 25.00 sq m 9700 2,42,500.00

WOODEN DOOR FRAMES : Providing wood work in frames of doors, windows, clerestory windows and other

frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length

9.1 (hold fast lugs or dash fastener shall be paid for separately).

9.1.1 Second class teak wood 0.25 cu m 142949.7 35,737.43

WOODEN BATTERNS : Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with

8.27 rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete.

8.27.1 Kiln seasoned and chemically treated hollock wood 0.25 CUM 187277.65 46,819.41

FLUSH DOOR SHUTTERS : Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-

decorative type, core of block board construction with frame of 1st class hard wood and well matched

9.21 commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:

9.21.1 35mm thick including ISI marked Stainless Steel butt hinges with necessary screws 20.00 SQM 2392.65 47,853.00

WOODEN LIPPING : Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all

3.06 9.23 edges of flush door shutters (over all area of door shutter to be measured). 20.00 SQM 462.35 9,247.00

Providing and Fixing ESDH 22x450 mm D-type Handle Material : Stainless Steel. Finish : Satin Stainless Steel (SSS).

3.07 MR of approved make and model all complete as per the direction of Engineer-in-charge. 10.00 Each 4650 46,500.00

Providing and Fixing EMB 245 SS Mortise Lock Body SB/TB for door thickness 25-50 mm for of approved make and

3.08 MR model all complete as per the direction of Engineer-in-charge. 2.00 Each 896 1,792.00

3 Digitally signed by AMIT

Providing and Fixing FH-943 Double cylender Floor Spring- with Closing Force EN 3 with Maximum door weight

105 Kg. Maximum door width 950mm.Closing speed : 130°

Final closing speed : 15-0°. Hold Open (standard): 90° hold open. Weight of floor spring approx : 6kg, 5,00,000

cycles Tested with 5 Years Warranty against manufacturing defect. CE certified for wooden doors all complete

as per the direction of Engineer-in-charge.

Providing 40x5mm flat iron hold fast 400mm long including fixing to frame with 10mm diameter bolts, nuts and

3.1 9.53 wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand 24.00 EACH 228.85 5,492.40

: 6 graded stone aggregate 20mm nominal size).

DOOR STOPPER:- Providing and fixing bright finished brass hanging type floor door

3.1 9.82 stopper with necessary screws, etc. complete. 6.00 Each 121.65 729.90

Providing and Fixing EFS ACC-001,002 top and Bottom Strap of approved make and model all complete as per

3.11 MR the direction of Engineer-in-charge. 6.00 Each 2065 12,390.00

Providing and Fixing EDL 024 Dead lock Back set- 50 mm with Key Hole of approved make and model all

3.12 MR complete as per the direction of Engineer-in-charge. 6.00 Each 1650 9,900.00

GLASS FILMS: Providing & Fixing Frosted Translucent, cast PVC, self-adhesive vinyl, special CRYSTAL-effect film to

reproduce Sand-blasting effect on glass with customised designs, thickness of 2 mil (0.05mm) without adhesive

& 3mil (0.8)with adhesive having minimum tensile strength of 3.5 pound/inch at 73 F(0.6 kg/cm at 23 C).

Adhesion after 24hrs of installation should be 4 pounds/inch (0.7 kg/cm) on Acrylic, Glass Polycarbonate: MCS

3.14 MR warranty of 3yrs (if exposed to direct sunlight) to 15yrs (indoors) must be endorsed by 3M India Limited 20.00 SQM 2950 59,000.00

Architectural Market Department. Contractors payment wouldn't be released until & unless he/she produces

orginal warranty certificate from the manufacturer.

LACQUERED GLASS: Providing and fixing of 6mm thick annealed SGG Planilaque Evolution (premium GRIHA

rated lacquered glass from Saint-Gobain) of approved color by Architect/ Client / Customer, fixed with SGG

ULTRAFIX (compatible neutral core silicon / double sided tape) on a perfectly leveled 12mm thick water proof

marine plywood / MDF / Mineral fibre board which is mounted on the RCC wall/any other structure. Lacquered

glass must be made industrially (via curtain coating process); opaque (if viewed against a support wall), coated

3.16 MR with PU lacquer (50 micron thick); color consistency (measured by Minolta spectrophotometer CM5081); highly 10.00 SQM 7850 78,500.00

durable (passes PERSOZ hardness test for minimum 220 oscillatios); humid resistant (conforms to BS EN 1036 1999);

environmentally friendly (no lead, no arsenic, no copper, noformaldehyde); appropriate recycled content (12%

post industrial / 6% post consumer); compressive strenght (1000 MPa) & tensile strenght (40 MPa),same as float

ACRYLIC SOLID SURFACE CLADDING: Providing & fixing of straight Paneling for walls & Columns structures

anchored in floor slab & celling, cladded with Acrylic Solid Surface 12mm thick sheets straight fabricated on a

single face, finished in matte finish, pasted with industrial grade silicon on a robust substrate. Substrate shall be

with suitable MS box sections [Appx. 15 to 20 kg/ Sqm] as per structural requirement & duly painted with anti-rust

red oxide coating and covered with 12 mm thick water proof ply as per the design and dimensions approved.

3.18 MR The proposal includes the cost of preparing appropriate substrate surface over the civil structure provided, 5.00 SQM 16000 80,000.00

along with material cost & installation / fixing on straight walls etc. FOR ALL WALL CLADDING, TABLE TOPS ETC.

4 Digitally signed by AMIT

BLINDS Providing & supplying of Window Blinds as per the approved sample in required shade and style

consisting, of ZEBRA BLINDS comprising of optima screen Fabric comprising of 22% polyester, 78% PVC, Fabric

weight 460-480G weight per sq m, Thickness 0.67 mm, Yarn count 18-19/cm, having fire resistance standard –

NFPA 701-89 small testing ISO-5659-2 .Thetear resistance should be complying to ISO4674 & breaking resistance –

ISO 5081. The DRIVE UNIT shall be of clutch for quick, easy and safe installation, moulded plastic with steel spring

support and inserted into the tube end. It shall be driven by a ball chain pulley with ball chain and can be

positioned at right side or left hand side of the Shade. The Shade when lowering or raising, shall be

automatically locked in position upon release of the ball chain by means of a built in friction lock.Universal

clutch for left and right hand operation.Chain Gear Ratio of 1.75:1. The END PLUG shall be molded of plastic

witha steel location pin.The plug shall be inserted into the tube end.(Opposite to the Drive Unit) for ease of

installation. The SUPPORT BRACKETS shall be of coated steel & provided with covers and used in right hand or

3.21 MR left hand positions differentiated by the acceptance of the of the rectangular drive unit support or the round 10.00 SQM 3990 39,900.00

idler plug pin.Can beinstalled (a) On Face (b) Ceiling Mount (c) On Frame (d) in Recess. The Bracket should be

protruding outside maximum of 80mm.The ROLLER TUBE shall be of extruded aluminum with 37mm internal

diameter & skin thickness of 1mm and shall incorporate a key way integral with the tube to accommodate the

spline. The BOTTOM RAIL shall be a Flat Bottom made up of powder coated steel. The BALL CHAIN shall be 2mm

diameter cord with 4.5mm diameter acetal balls moulded co-axially to it on 6mm pitch to form an endless ball

chain. It is used for raising or lowering action of the shades.

PELMET: Fabricate and install pelmet made of 19 mm thick board, up to 300 mm high and in line with external

glazing as per details of Architect. Rate to include finishing exposed surfaces of the Pelmet with enamel paint of

approved shade or 1mm laminate.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure

6.13 above plinth level up to floor V level.

6.13.2 Cement mortar 1: 4 (1 cement: 4 coarse sand) 10.00 Sqm 1123.8 11,238.00

3.24 6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. 10.00 Sqm 104.8 1,048.00

13.4 12 mm cement plaster of mix :

3.26 13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface 250.00 Sqm 262.7 65,675.00

Dismenteling and shifting of temporary false ceiling, partition with frame and other required area for renovation

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :

13.60.1 Two or more coats on new work 270.00 SQM 137.85 37,219.50

Providing and fixing one side12 mm thick hdhmr board with necessary screws/nuts & bolts/ nails, as per

MR direction of Engineer-in-Charge

12 mm thick hdhmr board 310.00 SQM 2150 6,66,500.00

4mm THICK MDF BOARD with 1 mm thick laminate : Providing and fixing plain lining with necessary screws/ nuts &

bolts/ nails, including a coat of approved primer on one face, and fixed on wooden/ steel frame work,

3.29 MR complete as per direction of Engineer-in-Charge

4mm thick MDF Board with 1 mm thick laminate : 180.00 SQM 2150 3,87,000.00

5 Digitally signed by AMIT

SHOP DRAWINGS: Preparation of complete set of shop drawings including finishing, MEP services, details, design

calcualtions etc. and any other details as and when desired by Engineer Incharge/ client. A qualified

4.04 MR professsional for the purpose shall be appointed after due appproval from Engineer InCharge. 1.00 LS 100000.00 1,00,000.00

ALUMINIUM FRAME: Providing and fixing 100mm thick partition, frame work in 50x25x1.5mm Aluminium Section

placed at 600mm centre to centre both ways (horizontal & vertical) fastened to floor, ceiling and horizontal

3.3 MR member. The item includes providing and fixing 50mm thick polyester synthetic insulation as insulation of 100 250.00 SQM 1250 3,12,500.00

GSM. (Frame colour to be as per the design like anodised black etc, including the hardware)

THERMAL INSULATION: Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to

IS: 8183 having density 24 kg/m3, 50mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw,

3.32 12.57 rawl plug & washers and held in position by criss crossing GI wire etc. complete as per directions of Engineer-in- 90.00 SQM 358.5 32,265.00

3.33 Wallpaper/ Dinoc & Digital Graphics: Washable Vinyl Coated Wall covering as per approved make and pattern

MR as approved by the client 60.00 SQM 3000 1,80,000.00

TOTAL WALL FINISHING WORKS 3,00,471.64 22,85,982.00

4 MISCELLANEOUS WORKS

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture

with following process in the sequence as detailed below:

The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos.

Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is

allowed to dry for 8 to 12 hrs.

On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess

sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special

grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs

on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs

On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner

in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed 15.00 Sqm 3049.85 45,747.75

smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure

spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per

direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.)

WATERPROOFING: Providing and laying water proofing treatment to vertical and horizontal surfaces of

depressed portions of W.C., kitchen and the like consisting of:

(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645

in recommended proportions including rounding off junction of vertical and horizontal surface.

(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in

4.03 22.3 recommended proportion including rounding off junction of vertical and horizontal surface. 5.00 SQM 769.6 3,848.00

(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.

(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and

pasted to each other with bitumen @ 1.7 kg/sqm).

TOTAL MISCELLANEOUS WORKS 49,595.75 -

6 Digitally signed by AMIT

SCHEDULE OF QUANTITIES - SANITARY & PLUMBING WORKS

S NO QUANTIT TOTAL AMOUNT TOTAL AMOUNT

S NO QUANTIT TOTAL AMOUNT TOTAL AMOUNT

NO DESCRIPTION UNIT RATE

2021 DSR (INR) NON-DSR (INR)

Supply, Installation, Testing and Commisioning of SINGLE LEVER CONCEALED BASIN MIXER (WALL MOUNTED) WITH

MR 1 SPOUT (COMPOSITE ONE PIECE BODY) EACH 2 12500.00 25,000.00

Supply, Installation, Testing and Commisioning of TABLE TOP BASIN, SIZE: 630x460x130mm

Supply, Installation, Testing and Commisioing of suitable compatible WASTE COUPLING 32MM- FULL THREAD-

WITH CERAMIC CAP-*130MM HEIGHT *65MM CERAMIC CAP

Supply, Installation, Testing and Commisioing of BOTTLE TRAP (WITH INTERNAL PARTITION) 32mm SIZE WITH 300mm

MR 4 & 190mm LONG WALL CONNECTION PIPES & WALL FLANGE EACH 2 2650.00 5,300.00

Supply, Installation, Testing and Commisiong of RIMLESS, BLIND INSTALLATION WALL HUNG WC WITH UF SOFT

MR 5 CLOSE SLIM SEAT COVER, HINGES AND ACCESSORIES SET, SIZE: 375X520X400 MM EACH 2 28500.00 57,000.00

Supply, Installation, Testing and Commisiong of PNEUMATIC CONTROL PLATE

Supply, Installation, Testing and Commisiong of ANGULAR STOP COCK WITH WALL FLANGE

Supply, Installation, Testing and Commisiong of CONCEALED STOP COCK WITH ADJUSTABLE WITH WALL FLANGE

Supply, Installation, Testing and Commisiong of HAND SHOWER (HEALTH FAUCET) WITH 8mm DIA 1.2 METER LONG

MR 9 FLEXIBLE TUBE EACH 2 2541.00 5,082.00

AND WALL HOOK ALD-CHR-573 or equivalent

Supply, Installation, Testing and Commisiong of PNEUMATIC SINGLE PIECE SLIM CONCEALED CISTERN BODY WITH

MR 10 INSTALLATION KIT & “S-TYPE” DRAIN PIPE CONNECTION SET FOR WALL HUNG WC (WITHOUT FLUSH CONTROL PLATE) EACH 2 7500.00 15,000.00

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

17.28.2 Flexible pipe

Providing and fixing mirror of superior glass (of approved quality) complete with 6mm thick hard board ground

17.31 12 fixed to wooden cleats with C.P. brass screws and washers complete. EACH 2 1607.95 3,215.90

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS

18.53.1 15 mm nominal bore EACH 20 574.30 11,486.00

18.76 Cutting holes upto 30x30cm in walls including making good the same.

18.76.1 With common burnt clay F.P.S. (non modular) bricks EACH 5 416.80 2,084.00

Making chases upto 7.5 X 7.5 cm in walls including making good and finishing with matching surface after

18.78 16 housing G.I. pipe etc. METRE 5 202.90 1,014.50

7 Digitally signed by AMIT

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water

supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m

18.7 spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints

complete as per direction of Engineer in Charge.

Internal work - Exposed on wall

18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water

supply, including

Concealed work all CPVC plain

including & brass

cutting chasesthreaded fittings,

and making i/c fixing

the walls etc., with clamps at 1.00 m spacing.

18.8.1 15mm nominal outer dia pipes METRE 30 497.80 14,934.00

18.8.2 20mm nominal outer dia pipes METRE 30 537.60 16,128.00

18.8.3 25mm nominal outer dia pipes METRE 10 6277.25 62,772.50

18.8.4 32mm nominal outer dia pipes METRE 10 739.50 7,395.00

18.51 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and

18.51.1 weighing not lessbore

15 mm nominal than 690 gms. EACH 5 798.95 3,994.75

Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for soil, waste, and vent,

Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary specials and fittings (confirming to

IS:14735) i.e. bends, tees, junctions (with or without doors), reducers, WC connectors, couplers, expansion joints /

bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp &

hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc. including chase

cutting as required, excavation and back filling in all kind of soils, suspended from floor under false ceiling or

embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse

sand : 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for proper completion of the

20 work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The

MR rubber ring shall confirm to IS:5382.

The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on 50x50x5 mm slotted

angle. The cost will include all support arrangements. The work includes commissioning of all pipes lines as per

drawings and specifications and as directed by engg-in-charge at site.

a 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 20.00 536.00 10,720.00

b 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 20.00 416.00 8,320.00

Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 6 Kg/ Sqcm rating with

fitting for waste pipe from fixtures to floor trap including reduces, enlarger, socket, couplers, bends, tees etc

including fixing at wall/ ceiling level supported by clamp & hangers etc. cutting holes in wall/ floors/ slabs and

making good the same with cement concrete 1:2:4 complete as required.

Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating complete in all respects.

Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser EACH 5 536.00 2,680.00

MR 23 Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps. EACH 5 726.00 3,630.00

Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round cover with screws and

MR other required fitting complete as required. EACH 5 1001.00 5,005.00

Supply, Installation, Testing and Commisiong of Soap Dispenser glass or plastic body as per approved by

MR engineer in charge. EACH 1 18938.00 18,938.00

Supply, Installation, of Towel Ring SS Finish Square or Ring type as per approved by engineer in charge.

8 Digitally signed by AMIT

TOILET CUBICLES:- Providing and fixing Toilet cubical(of following standard dimension which includes

600mm door size width) made up of thermosetting resign treated high pressure ,self supporting

MR 26 decorative compact laminates with permanently incorporate anti-bacterial agents(under JIS

Z2801:2000 certification) during manufacturing

Toilet cubicle with standard dimension front 18mm thick with 2100mm(H) x 900(W), door size 600mm x

1830mm), partition 12mm thick 1550mm depth x 1930mm(H) (including gap of 110mm) EACH 1 32500.00 32,500.00

URINAL PARTITIONS:- Providing & Fixing Privy divider panel laminates(Urinal Partitions) coupled with rust resistant

stainless steel fitting .Composed with 12mm thick compact laminates with permanently incorporate anti-

bacterial agents during manufacturing .Compact board should be resistance to water immersion

through permissible increase on thickness and mass <0.60% and board density >1.35kg/cm3 and fulfilled

the criteria of green guard gold certification and manufactured under EN438-2&3:2005 standard.

Urinal partition panel should consist of one undivided piece, chamfered edges with no joint in between which

provides a cleaner and well structured to restroom space. Dimension of Urinal partition should be in 1000-

1200mm in height and 450-550mm in depth and installed from the ground floor upto gap in between 500-

600mm . Finish and colour of Urinal partition should be approved under guidance of engineer-in-charge.

Providing and fixing battery based infrared sensor operated urinal of approx. size 590 x 400 x 400 mm having pre

& post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to

MR 28 wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge EACH 3 16500.00 49,500.00

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

DSR NO DESCRIPTION QUANTIT TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION QUANTIT TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT RATE

2022 DSR (INR) NON-DSR (INR)

A POINT WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper

conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular

A.1 plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core

cable etc as required.

Wiring for group controlled (looped) light point/ fan point/call bell point (without independent switch etc.) with

1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit, and

A.2 earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/

A.3 1.12 recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core Metre 180 334.00 60,120.00

cable for loop earthing as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including

1.24 connections but excluding modular plate etc. as required.

1.24.4 3 pin 5/6 amp socket outlet Each 90 122.00 10,980.00

1.24.5 6 pin 15/16 amp socket outlet Each 60 197.00 11,820.00

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular

plate as required.

9 Digitally signed by AMIT

Supplying and fixing following size/module, GI box along with Modular base & cover plate on existing modular

metal boxes etc. as required.

A.7 1.27.3 4 Module Each 343.00

B SUBMAIN AND CONTROL WIRING

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper

conductor, single core cable in surface/ recessed medium class PVC conduit as required

1.14.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Metre 100 233.00 23,300.00

1.14.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Metre 310 275.00 85,250.00

1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 250 334.00 83,500.00

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 50 439.00 21,950.00

1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Metre 50 1005.00 50,250.00

1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre 50 1365.00 68,250.00

Supplying and making end termination with brass compression gland and aluminium lugs for following size of

9.1 PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

Supply of following XPLE armourned 1.1 KV grade conforming to I.S.7098/1554Aluminium Conductor Cables :

MR Supply of following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor armoured cable of 1.1 KV

C.2 grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively & ISI marked.

(a) 3.5 C x 120 Sqmm XLPE cable RM 50 1560.00 78,000.00

(e) 3.5 C x 35 Sqmm XLPE cable RM 50 850.00 42,500.00

Supply of following sizes of copper cables -PVC sheathed PVC/XLPE insulated Copper conductor armoured

C.3 MR cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively & ISI marked.

(a) 4 C x 16 Sqmm XLPE copper cable RM 50 1850.00 92,500.00

(b) 4 C x 25 Sqmm XLPE copper cable RM 50 2140.00 1,07,000.00

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for

2.10 inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning

D.2 etc. as required.

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with

2.13 connections, testing and commissioning etc. as required.

10 Digitally signed by AMIT

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board,

2.4 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar,

interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator)

MR 12 way (4 + 36), Double door Each 2 9081.00 18,162.00

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit

breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with

2.14 connections, testing and commissioning etc. as required.

E PROVISIONS FOR VOICE, DATA, SECURITY & TV SYSTEMS

Supplying and fixing following modular switch / socket on the existing modular plate & switch box including

1.24 connections but excluding modular plate etc. as required.

1.24.7 TV socket outlet Set 3 148.00 444.00

Supply, Installation, Testing and Commisioning of Galavanized Iron (GI) Raceways along with required suitable

number of GI couplers for joining raceways and fixing GI brackets and all accessories complete in all respect as

MR per the directions of engineer in charge

E.9 300mmx38mm(GI) - 3 compartment

Supply, Installation, Testing and Commisioning of Junction boxes for direct access to cables at the intersection

MR of raceways supplied completely with base and cover plates, height adjustable junction box 65- 90 mm

including all accessories complete in all respect as per the directions of engineer in charge

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded

E.11 1.19 with fine tinned copper braid and protected with PVC sheath in the exisitng surface/recessed steel/ PVC Meter 180 47.00 8,460.00

conduit as required

Supplying and fixing of following sizes medium class PVC conduit aong with accessories in surface/ recess

1.21 including cutting the wall and making good the same incase of recessed conduit as required

Supplying and Installation of following size perforated of painting with powder coating M.S. cable trays of

4.1 perforation of not more than 17.5% in convinient sections, joined with connectors suspended from the cieleing

E.13 with MS suspenders including bolts and nuts painting suspenders etc as required

4.1.6 450 mm width x 50 mm depth x 2 mm thickness Metre 10 1137.00 11,370.00

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry

F.1 5.6 enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with SET 2 13838.00 27,676.00

charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

F.4 5.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. MTR 50 70.00 3,500.00

11 Digitally signed by AMIT

Supply, Installation, Testing and Commissiong of 10 KVA True Online Double Conversion UPS 3Phase Input -

3Phase Output in Parallel Redundant N+1 Configuration IGBT Based Rectifier and IGBT Based Inverter

Batteries:12 V, SMF Amararaja/Exide with minimum VAH capacity of 15600 suitable for 30 minutes backup with

MR each ups Along with Accessories Rack, Interlinks, SFU, Parallel Kit, DC Cable Upto 5 Meters complete in all SET 1 400000.00 4,00,000.00

respect as per the directions of the engineer in charge. UPS should have availability of Input /Output isolator,

Inbuilt manual bypass along with phase sequence corrector. UPS Efficiency shall not be less than 94% from 25%

MR Supply, Installation, Testing and Commissiong of 20 KVA DG Set as per Selection of Engineer in charge SET 1 400000.00 4,00,000.00

Note : Above rates are inclusive of providing suitable electrical panel for feeding supply to light db, power db,

ac db, ups as per site condition and direction of engineer incharge

Total of Electrical items 8,80,530.00 14,82,348.00

SCHEDULE OF QUANTITIES - HVAC WORKS

HVAC QUANTIT TOTAL AMOUNT TOTAL AMOUNT

HVAC QUANTIT TOTAL AMOUNT TOTAL AMOUNT

S No DESCRIPTION UNIT RATE

DSR (INR) NON-DSR (INR)

Supply, installation, testing and commissioning of following minimum 1.5tr capacity split high wall minimum 5star

1 1.0 rating with outdoor unit as per approved by site incharge Each 8 88980.00 7,11,840.00

Supply, installation, testing and commissioning of following minimum capacity 4-way flow Cassette Type Indoor

ceiling mounted unit with outdoor equipped with synthetic washable media pre-filter, fan section with low noise

2 MR fan/dynamically balanced blower, multispeed motor,

Lifting, Shifting, Supply, Installation, Testing & Commissioning of Interconnecting "Y" & "T" Joints i.e. Refnet Joints/

4 4 Header with Insulation for refrigearnt piping

Refrigerant Piping

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following

nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with

5 5 suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O

tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified

thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required :

5.1 5.1 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 100 245.00 24,500.00

5.2 5.2 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 80 331.00 26,480.00

5.3 5.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 100 466.00 46,600.00

5.4 5.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 80 588.00 47,040.00

5.5 5.5 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 40 707.00 28,280.00

6 1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper

conductor, single core cable in surface/ recessed medium class PVC conduit as required.

Cable Trays with Covers

12 Digitally signed by AMIT

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation

7 4.6 thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with

connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

7.1 4.6.8 300mm widthx62.5mm depthx2.0mm thickness meter 30 1190.00 35,700.00

7.2 4.6.10 450mm widthx62.5mm depthx2.0mm thickness meter 20 1474.00 29,480.00

Supply,installation,testing and commissioning of PVC drain water with necessary clamps, fittings such as bends

8 MR tees etc. and duly insulated.

Total HVAC WORKS 3,18,640.00 12,40,920.00

UNIT QUANTI RATE TOTAL TOTAL AMOUNT

UNIT QUANTI RATE TOTAL TOTAL AMOUNT

S No Description

A. UTP Components for Data DSR (INR) NON-DSR (INR)

Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors for Connectivity of Hub room to End Point.High Speed

1 Gigabit Ethernet U/UTP, 250 MHz, Class E, 23 AWG, Unshielded LSZH Cable, C6 Mtr 2400 57.00 1,36,800.00

Supply, Installation, Testing and Comissioning of I/O port for CAT6A cable termination at Work Station end. Keystone Unshielded Outlet,

Supply , Installtion , Testing and Comissioning of CAT6A patch cord 2 Mtr (7 feet) for information outlet (I/O) to end user device

3 connectivity.High Speed Gigabit 24AWG U/UTP Patch Cord, LSZH, C6 Nos. 50 275.00 13,750.00

Supply , Installtion , Testing and Comissioning of CAT6A patch cord 1 Mtr (3 feet) for information outlet (I/O) to Rack End Redantant

4 device connectivity.High Speed Gigabit 24AWG U/UTP Patch Cord, LSZH, C6 Nos. 50 280.00 14,000.00

Supply , Installtion , Testing and Comissioning of 24 port Loaded Jack Panel for CAT6A cable termination at rack end. Data Active

Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors for Connectivity of Hub room to End Point.High Speed

6 Gigabit Ethernet U/UTP, 250 MHz, Class E, 23 AWG, Unshielded LSZH Cable, C6 Mtr 750 57.00 42,750.00

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination at Work Station end. Keystone Unshielded Outlet,

Supply , Installtion , Testing and Comissioning of 24 port Loaded Staggred Jack Panel for CAT6 cable termination at rack end. Voice

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 1 Mtr (3 feet) for information outlet (I/O) to end user device

9 connectivity. (Rack end), High Speed Gigabit 26AWG Patch Cord, LSZH, C6 Nos. 24 235.00 5,640.00

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for information outlet (I/O) to end user device

10 connectivity.High Speed Gigabit 24AWG U/UTP Patch Cord, LSZH, C6 Nos. 24 275.00 6,600.00

Supply , Installtion , Testing and Comissioning of 2 Port British Style Shuttered Face Plate white for I/O fixing at user side

Supply , Installtion , Testing and Comissioning of 24 port Loaded Staggred Jack Panel for CAT6 cable termination at rack end. Riser

Supply , Installtion , Testing and Comissioning of 400 pair MDF box complete with Krone Modules

14 Supply , Installtion , Testing and Comissioning of 50 pair riser cable Mtr 40 1,053.00 42,120.00

C Network Rack and Other Accessories

SITC of 24U 600x600 Server Rack with perforation, Glass Door, Cable managemenet, 6/16A power strips- 2 nos, Castors, 4 fan for

19 cooling, Rack should have shelves - 4 nos Nos. 1 38,700.00 38,700.00

13 Digitally signed by AMIT

SITC,75" Inch Interacive Pannel With Windows 10 OPS Interactive Flat Panel is a 4k HD touch panel with built-in high-quality

speakers. That are large format touch panels to enhance the overall functionality of a classroom, meeting room, conference

hall and virtual studio in terms of collaboration, interactivity and audio-visual effects. Interactive Flat Panel is like an oversized tablet

that offers you all the applications (browser,

26 annotation software, teaching apps, etc.) on finger tips. . Nos. 3 5,12,500.00 15,37,500.00

Supply & Installation Testing & Commissioning of 48 PORT managed Network Switch Nos. 2 58,650.00 1,17,300.00

Supply & Installation Testing & Commissioning of Wifi as per the direction of engineer incharge Nos. 2 47,500.00 95,000.00

IP BASED CCTV SYSTEM DSR (INR) NON-DSR (INR)

S No Description UNIT RATE TOTAL AMOUNT TOTAL AMOUNT

S No Description UNIT RATE TOTAL AMOUNT TOTAL AMOUNT

Supply, installation, testing and commissioning of 2MP 2.8mm/3.6mm wide angle fixed lens IR Dome

Camera 1/3" Progressive Scan CMOS; H.265+/H.265/H.264+/H.264/MJPEG; Colour: 0.01 lux @(F1.2, AGC

1 ON), 0 lux with IR; 25fps/30fps(2560×1440, 1920×1080); 3 VCA functions; 3 streams; 3D DNR; ICR; EXIR 2.0, up to Nos. 6 7800.00 46,800.00

Supply, installation testing and commissioning of Network Video recorder Linux based to manage and

control all the cameras from control room. Software shall support maximum 32 channel with joystick

2 controller. 256Mbps Bit Rate Input Max(up to 32-ch IP video), 2 SATA Interfaces, alarm I/O: 16/4, 1.5U case,19" Nos. 1 135500.00 1,35,500.00

with 2x4TB i.e. 8TB HDD inside

Supply Installation Testing & Commissioning of 43 inch Full HD LED monitor including wall mount brackets/

3 clamps/ desk mounting stand. Nos. 1 57500.00 57,500.00

Supply & Fixing of PCB based Information Outlet (I/O) RJ45, TIA-568C Category-6, Termination of Catergory-6

UTP Cable, UL listed, Shall conform to Category-6 as per the EIA/TIA-568C.2, Shall support network line speeds

up to 1 Gbps, Shall have RJ-45 type connector with bend limiting and strain relief boot for securing IDC contacts

from external forces and for maintaining the bend radius of the cable, Shall have minimum durability of 750

4 mating cycles and 200 termination cycles. Shall be certified by independent labs like ETL/GHMT for Nos. 6 240.00 1,440.00

compliance to EIA/TIA-568C.2. The outlet shall be fixed in existing box & cover plate in wall/furniture/floor

complete as required.

Supply & Fixing of Single Faceplate, Single Port (RJ45-DATA) square plate having spring shuttered front access

5 for preventing ingress of dust, dimension as per commercially available modular office furniture. Nos. 6 80.00 480.00

Supply & Fixing of UTP Jack Panel UL listed, loaded with 24 no's UTP ports for PCB based IO Jacks (RJ45, TIA-

568C Category-6), having integrated bonding bar or other mechanism for grounding, loaded with

individually replaceable 24 nos. Category-6 I/O Jacks complying with TIA-568.C.2. Shall be 6 port

6 module construction for better cable dressing at the rear. The jacks shall have RJ-45 type connector with bend Nos 1 24500.00 24,500.00

limiting and strain relief boot for securing IDC contacts from external forces and for maintaining the bend radius

Supplying & Fixing of Category 6, UTP patch cords constructed of 24 AWG unshielded twisted pair

stranded copper cable with an enhanced performance modular plug at each end. Patch cord cable shall be

7 offered in multiple coloured UTP cable for design flexibility with a clear strain relief boot on each modular plug. Nos. 6 235.00 1,410.00

All patch cords shall be compatible with both T568A and T568B wiring schemes. UTP Cable, 2 Meter.

14 Digitally signed by AMIT

Supplying & Fixing of Category 6, UTP patch cords constructed of 24 AWG unshielded twisted pair

stranded copper cable with an enhanced performance modular plug at each end. Patch cord cable shall be

8 offered in multiple coloured UTP cable for design flexibility with a clear strain relief boot on each modular plug. Nos. 6 275.00 1,650.00

All patch cords shall be compatible with both T568A and T568B wiring schemes. UTP Cable, 1 Meter.

SCHEDULE OF QUANTITIES - LIGHTING WORKS

S NO DSR/MR Description Unit QTY Rate DSR AMOUNT NON DSR AMOUNT

Supply, Installation, Testing and Commissioing of Recessed downlightwith HPE (High-Performance Efficiency)

with LED (Light Emitting Diode), system power: 12 W, Luminous flux of luminaire 1320 lm, 110 LM/W system

efficacy, Colour temperature of 4000 K, Neutral white, CRI > 80, 230V constant current driver, 70% of luminous

flux after 50,000 operating hours; energy-efficient LEDs, direct light emission, housing in die-cast aluminium,

2 MR Polyester powder white coloured coat applied over a 5-stage pre-treatment trim, prismatic diffuser for no 35 1370.00 47,950.00

homogenous light distribution, ZHLS (ZERO HALOGEN LOW SMOKE) wiring, Electronic control gear,

Protection class II, IP 40, Ø = 175 mm, DA(Ø) = 160 mm, H = 59 mm

Supply, Installation, Testing and Commissioing of Pendant/Recessed luminaire with LED (Light Emitting Diode),

system power 28 W, luminous flux of luminaire 3080 lm, 110 LM/W system efficacy, direct light emission CRI>80,

colour temperature of 4000K, Neutral white, 230V constant current driver, 70% of luminous flux after 50,000

operating hours, energy efficient LEDs, luminaire profile in aluminium, Plastic moulded end caps, Polyester

3 MR powder Aluminium white coloured coat applied over a 5- stage pre-treatment, high efficiency glare-free snap no 12 5110.00 61,320.00

fit micro-prismatic diffuser for homogeneous light distribution, ZHLS (Zero Halogen Low Smoke) internal wiring,

integral Electronic control gear, adjustable suspender,

Protection class I, IP 20, L = 1199 mm, B = 75 mm, H = 90 mm, PL max = 1500 mm

Supply, Installation, Testing and Commisioning of Recessed luminaire with LED (Light Emitting Diode), system

power: 28 W, luminous flux of 2800 lm, colour temperature of 4000 K, Neutral white, 230 V constant current driver,

70% of luminous flux after 50,000 operating hours, energy-efficient LEDs, CRI > 80, CRI > 80, THD<5%, P.F>0.95,

SDCM 3, direct light emission, Luminaire housing in Aluminium Extrution, polyester white powder coat applied

over a 5-stage pre-treatment, Opal diffuser for glare-free uniform light, integral electronic control gear,

Protection class I, IP40,

SCHEDULE OF QUANTITIES - FIRE ALARM

DSR NO DESCRIPTION UNIT RATE TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION UNIT RATE TOTAL AMOUNT TOTAL AMOUNT

2022 DSR (INR) NON-DSR (INR)

17.1.1 Supplying, installation, testing & commissioning of heat detector operating at 54ºC/ 57ºC with rate of rise cum

fixed tempreature (dual thermistor) type with mounting base complete with all connection etc. as required. No 1 1071 1,071.00

17.1.2 Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete

1 with all connections etc. as required. No 20 1153.00 23,060.00

Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with

2 17.1.3 stainless steel chain & hammer assembly complete with glass and push button etc. as required. No 4 474.00 1,896.00

Supplying, installation, testing & commissioning response indicator on surface/ recess MS box having two LEDs

4 17.1.5 metallic cover complete with all connections etc. as required No 20 196.00 3,920.00

15 Digitally signed by AMIT

Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement,

5 17.1.6 mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching No 4 557.00 2,228.00

transformer etc. complete as required.

Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement,

6 17.1.7 mounted in A.B.S. box with hinged cover plate & suitable for operation with amplifier i/c line matching No 4 491.00 1,964.00

transformer etc. complete as required.

Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual

indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189

7 MR with mimic diagram for all area/zone covered, complete with all connections, interconnections as required. No 1 8866.00 8,866.00

Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required.

Supplying, installation, testing & commissioning of digital audio amplifier 75 Watt, 25V rms operating at 240 Volt

9 17.3.7 AC Supply complete as required. NOS 1 145793.00 1,45,793.00

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper

10 17.5.2 conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required Mtr. 180 173.00 31,140.00

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface /

17.5.3 recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as

17.5.3.2 speaker cable Two pair, 2-core, 1.5 sqmm Mtr 165 89.00 14,685.00

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like

coupler etc. as required.

TOTAL FIRE ALARM WORKS 2,51,417.00 8,866.00

SCHEDULE OF QUANTITIES: FIRE PIPING, HYDRANTS, SPRINKLERS AND ACCESSORIES

S No DSR DESCRIPTION QTY UNIT RATE TOTAL AMOUNT TOTAL AMOUNT

S No DSR DESCRIPTION QTY UNIT RATE TOTAL AMOUNT TOTAL AMOUNT

MR DSR (INR) NON-DSR (INR)

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239

including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the

wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint

18.7 of required shade complete as required :

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree

18.21 centigrade with required accessories :

18.21.1 Pendant type 15 Each 522.00 7,830.00

Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete

with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with

branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer,

nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required.

16 Digitally signed by AMIT

Providing and fixing ISI Marked of approved make Fire Extinguishers complete with all accessories as per

4 manufacturer's specifications.

a) CO2 gas nozzle type - 9 Litre capacity (IS:15683). 1 NOS 14500.00 14,500.00

b) Mechanical Foam gas cartridge type. 9 Kg capacity (IS:15683). 1 NOS 4560.00 4,560.00

c) ABC dry powder stored pressure type 6 kg capacity (IS:15683). 1 NOS 6500.00 6,500.00

Furniture Work TOTAL AMOUNT TOTAL AMOUNT

Furniture Work TOTAL AMOUNT TOTAL AMOUNT

UNIT Qty RATE

Sno. Item Specifications DSR (INR) NON-DSR (INR)

Supplying and placing in position of main table as per photograph/drawing .The table shall be made out of

25mm thick pre -laminated particle board of approved shade. The working and non working edges shall be

finished with machine pressed with 2mm PVC egdge banding. The table top shall be supported with MS

powder coated "C" shape leg of size 50mm x 50mm with connectors of size 40mm x 40mm. The front modesty

are made out of 18mm thick prelaminated particle board with 2mm thk pvc edge banding. The table shall be

provisioned with Side unit of overall size: 1500mm(L) x 600mm(D) x 750mm(H) . Side storage having a provision

1 for three equal drawer unit and two openable shutter & one open storage with shelf in it. The Side unit top EACH 2.00 45,500 91,000.00

shall be made out of 18mm thick pre laminated particle board and rest all storage to be made out of 18mm

thick pre laminated particle board. Provision of Junction box, wire raceway and 6 module fliptop box for wire

passing or as per site requirement.Main Table Dimension (L)1500mm X (D) 600mm X (H)750mm.

Supplying and placing in position of 360 degrees revolving high back chair . The chair of Size :-(W)590mm X

(D)505mm X (H)1180mm - 1280mm. The chair shall be ergonomically design contour lumbar back design made

of 12mm thick BWR plywood (IS Grade - 303 for seat and back) upholstered with leatheritte and cut foam. The

LAB High chrome plated loop armrest with padded upholstery is provided for extra comfort. The chair shall be provided

2 Back with pneumatic height adjustment which shall have stroke of 10.0 EACH 2.00 27,500 55,000.00

Chair +/- 0.3 cm . Five star chrome base with nylon castors . Chair seat has foam of density 30- 35 (+/-2kg /m3)

Dimensions The backrest has a foam of 28kg/m3.

Dimesnion: 1200mm(L)x 600mm(D) x 750mm(H) Modular Workstation With 1200mm, Double Raceway systems

Skirting label and below the table top . lower tile both side laminated and upper tile inside side fabric, White

Board and white Tinted Glass . With Side Top Size 900W x 400D x 750H 25mm thick Gabel end 18mm thick MDF

Linear board., and 3Drawer top supported Pedestal unit Size 400W x 400D x 725H made in 18mm thick..Complete

3 Workstati Made in MDF Board.. Laminate 1- Frosty White, Laminate2 For drawer Facia-Honkong Blue, Fabric-F 161 EACH 34.00 38,650 13,14,100.00

on Dolphin Blue, Powder Coating-Munshel Gray. and White Tinted Glass

Supplying and placing in position of 360 degrees revolving medium back chair of size: 660mm (L) x 490mm(D) x

1315mm(H). The seat cushion to be upholstered on 10-12mm thick water proof plywood and moulded foam.

The seat to be made with 12 mm thick hot pressed BWR plywood (IS grade - 303) upholsetered with

Polyurethane foam and mesh fabric over it. The chair shall be provided with self tension single locking

Workstati mechanism and pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm .The black .The

4 pneumatic height adjustment shall have adjustment stroke of 100 mm and shall be operated at 30kgs extension EACH 41.00 16,500 6,76,500.00

Chair force.The Seat & back are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane

foam, chair seat has foam of density 32-35 kg/m3. The backrest has a foam of 28kg/m3. adjustable arm rest

17 Digitally signed by AMIT

Supplying and placing in position of 360 degrees revolving medium back chair of size: 660mm (L) x 490mm(D) x

1315mm(H). The seat cushion to be upholstered on 10-12mm thick water proof plywood and moulded foam.

The seat to be made with 12 mm thick hot pressed BWR plywood (IS grade - 303) upholsetered with

Polyurethane foam and mesh fabric over it. The chair shall be provided with self tension single locking

LAB mechanism and pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm .The black .The

5 pneumatic height adjustment shall have adjustment stroke of 100 mm and shall be operated at 30kgs extension EACH 31.00 16,500 5,11,500.00

force.The Seat & back are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane

foam, chair seat has foam of density 32-35 kg/m3. The backrest has a foam of 28kg/m3. adjustable arm rest

Supplying and placing in position of main table as per photograph/drawing .The table shall be made out of

25mm thick pre -laminated particle board of approved shade. The working and non working edges shall be

finished with machine pressed with 2mm PVC egdge banding. The table top shall be supported with MS

powder coated "C" shape leg of size 50mm x 50mm with connectors of size 40mm x 40mm. The front modesty

are made out of 18mm thick prelaminated particle board with 2mm thk pvc edge banding. The table shall be

provisioned with Side unit of overall size: 1800mm(L) x 450mm(D) x 675mm(H) . Side storage having a provision

6 for three equal drawer unit and two openable shutter & one open storage with shelf in it. The Side unit top EACH 1.00 48,500 48,500.00

shall be made out of 18mm thick pre laminated particle board and rest all storage to be made out of 18mm

thick pre laminated particle board. Provision of Junction box, wire raceway and 6 module fliptop box for wire

passing or as per site requirement. Main Table Dimension (L)1800mm X (D) 900mm X (H)750mm overall Side

Runer Dimension (L)1800mm X (D) 450mm X (H) 675mm

Supplying and placing in position of 360 degrees revolving high back chair of size: 660mm (L) x 490mm(D) x

1315mm(H). The seat cushion to be upholstered on 10-12mm thick water proof plywood and moulded foam.

The seat to be made with 12 mm thick hot pressed BWR plywood (IS grade - 303) upholsetered with

officer Polyurethane foam and mesh fabric over it. The chair shall be provided with self tension single locking

Main mechanism and pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm .The black .The

7 High pneumatic height adjustment shall have adjustment stroke of 100 mm and shall be operated at 30kgs extension EACH 1.00 21,500 21,500.00

Back force.The Seat & back are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane

Chair foam, chair seat has foam of density 32-35 kg/m3. The backrest has a foam of 28kg/m3. adjustable arm rest

Supplying and placing in position of medium back cantilever chair of size: (W)610mm X (D)505mm X

(H)990mm.A contemporary design with an all black finish, . Material & subtype:Premium Leatherette, Colour &

Visitor Colour Family:Black, Dimension(W)610mm X (D)505mm X (H)990mm, Back Type:Cantilever, Base:Cantilever

8 Back Frame, Base Type:Cantilever, Maximum Seating Height:19".The Seat & back are made up of 12mm thk hot EACH 2.00 16,500 33,000.00

Chair pressed plywood upholstered with PVC with polyurethane foam, chair seat has foam of density 32-35 kg/m3.

The backrest has a foam of 28kg/m3.

Supplying, and placing in position of sofa with premium Leatherette upholstery adds class to the soft cushioned

backrest and seating. Material & subtype:Premium Leatherette, Colour & Colour Family:as per requirement,

Seating Height:16.14"

,Legs:Stainless Steel, Finish:Matte, Size:Compact, Style:Modern, Texture:Two Tone. steam beech solid wood

2 seater have used for framing construction of sofa .The seat cushion is made of multi layered foam of density 32-35

9 kg/m3. The seating cushion have 2.75 & EACH 2.00 45,500 91,000.00

1.75 inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch strength . The backrest

has a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. 2 seater Dimension(L)1390mm X (D)750mm X

10 CENTRE TABLE WITH GLASS TOP EACH 1.00 16,500.00 16,500.00

11 SIDE TABLE WITH WOODEN STRUCTURE EACH 3.00 12,500.00 37,500.00

18 Digitally signed by AMIT

Supplying and placing in position of conference table of required size as per image/drawing. The table of size:

1800mm (L) x 1500mm (W) x 750mm (H). The work surface top should be of thickness 42mm top prelaminated

particle board with 2mm thick PVC edge banding. The side panel are made up of 36mm thick prelaminated

12 particle & modesty panel are made out of 25mm thick prelaminated particle board with 2mm thick PVC edge EACH 1.00 65,000 65,000.00

banding. The wire carrier should be made from 0.6mm thick CRCA & powder coated 40-50 microns. Also

having a provision of 6 module flip top box & metal raceway for wire flow.

Supplying and placing in position of 360 degrees revolving medium back chair of size: 660mm (L) x 490mm(D) x

1315mm(H). The seat cushion to be upholstered on 10-12mm thick water proof plywood and moulded foam.

The seat to be made with 12 mm thick hot pressed BWR plywood (IS grade - 303) upholsetered with

Polyurethane foam and mesh fabric over it. The chair shall be provided with self tension single locking

Confere mechanism and pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm .The black .The

13 pneumatic height adjustment shall have adjustment stroke of 100 mm and shall be operated at 30kgs extension EACH 4.00 16,500 66,000.00

Chair force.The Seat & back are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane

foam, chair seat has foam of density 32-35 kg/m3. The backrest has a foam of 28kg/m3. adjustable arm rest

Supplying and placing in position of conference table of required size as per image/drawing. The table of size:

900mm (L) x 900mm (W) x 750mm (H). The work surface top should be of thickness 42mm top prelaminated

particle board with 2mm thick PVC edge banding. The side panel are made up of 36mm thick prelaminated

14 particle & modesty panel are made out of 25mm thick prelaminated particle board with 2mm thick PVC edge EACH 2.00 45,500 91,000.00

banding. The wire carrier should be made from 0.6mm thick CRCA & powder coated 40-50 microns. Also

having a provision of 6 module flip top box & metal raceway for wire flow.

Supplying and placing in position of main table as per photograph/drawing .The table shall be made out of

25mm thick pre -laminated particle board of approved shade. The working and non working edges shall be

finished with machine pressed with 2mm PVC egdge banding. The table top shall be supported with MS

powder coated "C" shape leg of size 50mm x 50mm with connectors of size 40mm x 40mm. The front modesty

are made out of 18mm thick prelaminated particle board with 2mm thk pvc edge banding. The table shall be

provisioned with Side unit of overall size: 1800mm(L) x 600mm(D) x 750mm(H) . Side storage having a provision

15 for three equal drawer unit and two openable shutter & one open storage with shelf in it. The Side unit top EACH 1.00 75,000 75,000.00

shall be made out of 18mm thick pre laminated particle board and rest all storage to be made out of 18mm

thick pre laminated particle board. Provision of Junction box, wire raceway and 6 module fliptop box for wire

passing or as per site requirement. Main Table Dimension (L)1350mm X (D) 900mm X (H)750mm overall Side

Runer Dimension (L)1200mm X (D) 450mm X (H) 675mm

The storage top 25 mm thick, shutter and side panels are made of 18mm thick and back panel is made of

Openabl 09mm thick MDF of approved shade. All the edges of storage surface shall be provided with machine pressed

16 e Shutter imported PVC lipping glued with hot melt EVA glue free from any VOC with free groove handle and suitable -

storage lock. All exposed area PVC edge lipping

Total Amount H # 32,78,100.00

Total Amount H # 32,78,100.00

SCHEDULE OF QUANTITIES: SIGNAGE

S No Description Unit Qty Unit price DSR Amount Non-DSR Amount

1 RECEPTION AND OUTER AREA 3D ACRYLIC SIGNAGE

Providing, fabricating and fixing of 3D Acrylic Letters raised 1.5 inches of required size and shape with

arrangement of screws in the letters itself for mounting on the walls or pasting using 3M VHP Tape. Fixing

complete as per directions of the engineer. The Sizes would be calculated in Sqft as per Logo Design provided.

Tentative Size 36"X60"

19 Digitally signed by AMIT

1 OUTER AREA 3D ACRYLIC SIGNAGE

Providing, fabricating and fixing of 3D Acrylic Letters raised 1.5 inches of required size and shape with

arrangement of screws in the letters itself for mounting on the walls or pasting using 3M VHP Tape. Fixing

complete as per directions of the engineer. The Sizes would be calculated in Sqft as per Logo Design provided.

Tentative Size 42"X180"

20 Digitally signed by AMIT