NIT No. PZRMC/e-NIT-16/2025-26

Civil Work

Ordinary Cement concrete [ Mix 3 : 1.5 : 1 ] with graded stone chips(20 mm.size) excluding shuttering and reinforcement, if any, in ground floor.as per Is Codes a) Pakur Variety Lintel over 250 mm thick brickwork

Hire and labour charges for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. (upto roof of ground floor) . (a) 25 mm. to 30 mm. thick wooden shuttering as per decision & direction of Engineer-in-charge. i) Foundation and Plinth

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups,binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape,placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction.(i) Tor steel/Mild steel, (a) For works in foundation, basement and upto roof of ground floor / upto 4m.ii) Ground Floor Taken As 1.2% of Concrete

Brick work with 1st class bricks in cement mortar (6:1) . b) In Superstructure Ground Floor

125 mm. thick brick work with 1st class bricks in cement mortar (4:1) in ground floor. Partition wall

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide of required to match colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (A) Floor With Sand Cement Morter (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 kg/Sq.m & joint filling using white cement slurry @ 0.20 kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m ii) Other than Coloured decorative including white Ground Floor On floor-( for his & her both)

(B) Wall With Sand Cement Morter (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 kg/Sq.m & joint filling using white cement slurry @ 0.20 kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m ii) Other than Coloured decorative including white on wall- total length= 30.5 m & height= 2.1m-( for his & her both)

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or rougening of concrete surface, including throating, nosing and drip course where necessary (ground floor) . (i) With 4:1 cement mortar 15 mm thick with cement mortar(internal) inside wall

(ii) With 6:1 cement mortar (b) 20 mm. thick plaster(External) outside wall less door

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the Engg-in-charge. In ground floor (b) Two Coats (b) 20 mm. thick plaster(External) outside wall less door

Applying interior grade acrylic primer of approved quality & brand on plastered or concrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint i/c scraping & preparing the surface thoroughly, complete as per manufacturer's specification & as per direction of the EIC. (b) Two Coats i) Water based interior grade Acrylic Primer 15 mm thick with cement mortar(internal) inside wall

Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Qty same a Interior Primer 15 mm thick with cement mortar(internal) inside wall

Protective and decorative acrylic exterior emulsion paint of approved quality as per manufacturers specification and as per EIC to be applied over acrylic primer as required. The rate includes cost of materials, labour, scaffolding and all incidental charges but excluding the cost of primer. In ground floor( two coats) Premium 100% Acrylic Emulsion (b) 20 mm. thick plaster(External) outside wall less door

Supplying, Fitting & Fixing 30 mm thick both side prelaminated Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45degree angle on either sides forming styles; and 5 mm th 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail sheet to be fitted in the M.S. frame welded/sealed to the styles &rails with 7 mm (5 mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the “C” channel using PVC solvent adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-in- Charge.

Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.). (v) 40 mm dia

(vi) 32 mm Dia,

(vii) 25 mm dia

(viii) 20 mm dia

Supplying, fitting and fixing bib cock or stop cock. (b) (ii) Chromium plated Concealed Stop Cock (Equivalent to code no-514(A) & Model- Tropical / Sumthing Special of ESSCO or similar brand).

(c) (i) Chromium plated Bib Cock (angular shape with wall flange) (Equivalent to Code No. 5037 & Model - Florentine of Jaquar or similar brand).

Supplying, fitting and fixing C.I. holder bat clamp including cutting holes in wall etc. and mending good all damages in cement concrete with jhama chips (4:2:1) and cement plaster (6:1) to match and curing complete in all respect. (iii) 25mm

Supplying fitting and fixing PVC pipes of approved make of (medium duty) conforming to ASTMD - 1785 & Threaded to match with GI pipes as per IS : 1239 (Part - I). With all nacessary accessories, specials viz socket, bend, tee, union, cross, elbo, nipple, longscrew, R/socket, R/tee, short piece etc. fitted with holder bats clamp, including cutting pipes, making threads, fitting fixing etc. complete in all respect including cost of all necessary fittings as required jointing materials and two coats of paiting with approved paint in any position above ground. (Payment will be made on centre line measurement of the total pipeline including all specials.No separate payment will be made for accesories, specials. Payment for painting will be made seperately).a) For Exposed Work PVC pipes From Main Line 50 mm dia

40 mm dia Delivery Line from Overhead Tank Toilet block(his & her)-total length=22 m

32 mm dia Toilet block -total length=9.9 m

b) For concealed work 15 mm dia Toilet block-total length=36.9 m

20 mm dia Toilet block -total length=3.3 m

Supplying fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 & Threaded to match with GI pipes as per IS : 1239 (Part - I). With all nacessary accessories, specials viz socket, bend, tee, union, cross, elbo, nipple, longscrew, R/socket, R/tee, short piece etc. fitted with holder bats clamp, including cutting pipes, making threads, fitting fixing etc. complete in all respect including cost of all necessary fittings as required jointing materials and two coats of paiting with approved paint in any position above ground. (Payment will be made on centre line measurement of the total pipeline including all specials.No separate payment will be made for accesories, specials). PVC pipes (Dia) 40 mm dia

Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc.

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer . c) 1000 Ltr. Capacity

Labour for hoisting plastic water storage tank. (i) Upto 1500 litre capacity. (a) Upto 1st story from G.L.

Supplying,fitting and fixing vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. ii) 550 mm x 400 mm size

Supplying,fitting and fixing approved brand P.V.C.CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. iii) 600 mm long For W.C

iv) 750 mm long For Wash Basins & Urinals

Supplying,fitting and fixing approved brand 32 mm dia P.V.C.waste pipe, with PVC coupling at one end fitted with necessary clamps. ii) 750 mm long

Supplying, fitting and fixing pillar cock of approved make. (a) (i) C.P Piller cock- 15 mm (Equivalent to Code No-507 & Model - TROPICAL / SUMTHING SPECIAL of ESSCO or similar brand). For Wash Basin

Supply of UPVC pipes (B Type) & fittings conforming to IS - 13592 - 1992. (i) Single Socketed - 3.00 m length b) 110 mm dia

(iii) Single socket 1.8 m length b) 110 mm dia

Fittings. i) Coupler b) 110 mm dia

v) Plain Y b) 110 mm dia

ix) Bend 45° b) 110 mm dia

x) Bend 87.5° b) 110 mm dia

xi) Door bend (T.S ) b) 110 mm dia

xxi) 110 mm x 110 mm P. Trap 75 mm

xv) Vent Cowl (b) 110 mm

Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps(any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineer-in-charge. (Payment will be made on centre line measurement of the total pipe line including specials). (A) Above Ground ii) 110 mm dia

(B) Under Ground ii) 110 mm dia

Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) A) For Exposed Work d(ii) 32 mm dia. medium quality

Shallow water closet Indian pattern(I.P.W.C.) of approved make in white vitreous chinaware supplied ,fitted and fixed in position (excluding cost of concrete for fixing). (i) 580 mm long

Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts,nuts etc. (a) With 'P' trap

Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. (ii) 470 mm x 280 mm x 340 mm

Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately).(i) 450 mm X 350 mm

Supplying,fitting and fixing 32 mm dia. Flush pipe of approved make with necessary fixing materials and clamps complete. i) Polythene Flush Pipe

Supplying, fitting and fixing liquid soap container (c) Fibre glass

Supplying, fitting and fixing soap holder. (b) Fibre glass

Supplying, fitting and fixing towel rail with two brackets. (b) Aluminium (iii) 25 mm dia. and 750 mm long

Supplying,fitting and fixing in position R.C.C. Manhole/pit cover of approved make with rim of approved make (Heavy type). (ii) 560 mm dia.

Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. Note:- (i) Finished level of Septic Tank should be 400 mm. from Ground Level. (ii) Height of 50 mm.Ventilation pipe &Mosquito proof mesh, should be follwed as per IS:2470,Part-I.Payment will be made separetly on the basis of actual height based on relevant I.S.Code. (iii) For 30 users A) With Pakur variety. ((JSW/JSPL/SHYAM/BMASL/ELECTROSTEEL/SSL)

Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brickwork, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm thick dry brick work and 250 mm thick cement brick workOther than SAIL/TATA/RINL) (1:6) and 1.00m inside dia

Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in ement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials.

ii) With pakur varity(JSW/JSPL/SHYAM/BMASL/ELECTROSTEEL/SSL)

Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars. bars. (a) In ground floor including roof

Tubewell

Labour for boring through any type of soil for sinking Tube - Well of required dia with top enlargement by rig boaring system (either by reserve circulation or by direct rotary method) including hire charges and labour for rig machine, tools and plants stagging, force pumping set and making arrangements for water required for boring etc. complete and lowring of pipes, strainer, blind pipes etc. complete.

for first 50 Mtr.

for next 50 Mtr.

for next 50 Mtr.

for rest 100 Mtr.

Supplying, fitting and fixing PVC pipes for underground work of approved make (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metrebelow surfacein all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.) a) 200 mm internal dia

Supply of High Density Poly-ethylene Pipe conforming to IS-4984-1985(dia) 6Kg./Sq.Cm.(working pressure) 50mm. dia

Supplying, Fitting & Fixing Steel cutter Piece upto 450mm long with sockets. (iii) 75 mm dia

Washing and developing Tube - Well with air compressor pump and engine for 8 ( eight) hours continious pumping per ay with necessary arrangement for testing the yield in gallons per hour with 'V' notch including hire and labour charges for all tools and plants and scaffolding as required complete in all respect. for Tube - Well of 100 mm. dia. With top enlargement 200mm. Dia. To have yield of 6000 gallons per hour. For 3 (Three day's)

Supplying, fitting and fixing G.I. cap at top (iii) 200 mm

Providing 200 mm centre guide. i) With Clamp

Packing annular space between the outside of the housing pipe and the bore with puddled clay balls of approved size as per direction of the Engineer-in-charge with cost of all materials and labour complete.

Collecting sample of water for bacteriological and chemical test from any depth at any time during execution of work including hire and labour charges for tools and plants and sterilising the equipments, paying all charges and fees, testing etc. complete in all respect as per direction.

Geophysical Investigation of the aquifer by electro logging system with tools & plants as necessary including supply of necessary report

Labour for making arrangement for showing verticality test including the cost for hire charges of tools and plants, scafolding, labour etc. all complete.

Electrical WORK

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish Average run 8 mtr

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish On Board

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 2+6 way

Supplying and fixing 240V MCB Isolator on din rail of existing DBs and necessary connection. 40 Amp

Supplying and fixing 6-32 A 240 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection

Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling.

Supply of 240V 300 mm(1400 RPM) heavy duty exhaust fan. Color-Grey) (Make: Orient )

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter:

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) For Al 23 cm Exhaust fan (9")

17. Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length

Supply of 40 watt TRIMLINE is a robust and high performance batten. This LED luminaire comprises of extruded channel in thermally conductive material. High translucent serrated milky white diffuser is used to get glare free and smooth light distribution. Efficacy : 100 lumen/watt Model No.CCS-100-40-65-SL-DP-NWH

Supply of 2 HP Solar Submarsable Pumping system consisting of 6 Nos 335 Wp (72 Cell) Polycrystaline SPV Module (Bikram Solar/ Sova Solar make), 1 no. 2 Hp Submarsable Pump suitable (KSB Make) Suitable 3 Phase Pump controller & wires and other necessary acessories as required for your Bore Well (drilling of broe well to be done by the client) at your site including installation. Approved Analized Rate

Add GST @ 18 %

Add Labour Welfare Cess 1 %

Please Enable Macros to View BoQ information