CONSTRUCTION OF FACTORY BUILDING FOR THE PITH PRODUCTION AT PALAKKAD

Setting up of Factory for Pith Production at Palakkad

Earthwork in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (notexceeding1.5minwidthor10sqm on plan),including dressing of side sand ramming of bottoms, liftupto1.5m,including getting out the excavated soil and Disposal of surplus excavated soil as directed, within a leadof50m.All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plinth level:1:3:6(1cement:3coarse sand:6 graded stone aggregate 40mm nominal size)

Solid block masonry using pre cast solid blocks (Factory made) of size30x20x15cm or nearest available size confirming to IS2185 part I of 1979 for foundation and plinth with thickness 15 cm in:CM1:6(1cement:6coarsesand)etc complete

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement-All work up to plinth level:1:1:5:3(1cement1.5coarse sand:3gradedstoneaggregate20mm nominal size

Filling with contractor's own earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto1.5m as per direction of site Engineer-in-charge

Solid block masonry using precast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS2185 part I of 1979 for foundation and plinth with thickness 15 cm in:CM1:6(1cement: 6 coarse sand) etc complete

Centering and shuttering including strutting, etc. and removal of form for: foundations ,footings ,base of coloumn etc

Centering and shuttering including strutting, etc. and removal of form for: Lintels, beams, plinth beams, girders bressumers and cantilevers

Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings,balconies,shelves,chajjas,lintels,bands,plainwindowsills,staircases and spiral staircases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3(1cement:1.5coarsesand(ZoneIII):3graded stone aggregate 20mm nominal size)

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete up to plinth level Thermo-Mechanically Treated bars of grade Fe-500Dormore

Steel work in built up GI tubular(round,square or rectangular hollow tubesetc.)trusses etc.,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer,including welding and bolted with special shaped washers etc.complete

12 mm cement plaster of mix:1:6(1cement:6finesand).

Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications: Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75ltr/10sqm

Finishing with Epoxy paint (two or more coats)at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface,etc.complete.Onsteelwork

Providing at all heights,levels and locations Aluminium profile industrial troughed sheet of Alloy 31500/31000/40800, conformingtoIS1254,IS737,IS2676.The sheet shall be fixed using self drilling/ self tapping SS screws of size 5.5x65 mm with EPDM seal complete upto required pitch in horizontal, vertical or curved surfaces i/cutting to size and shape where required as per specifications,detail drawings and direction of Engineering- Charge. The rate shall be inclusive of all screws,seal, ridge, labour, scaffolding,machinery for fixing and approved sealent where requiredetc.but excluding the cost of purlins,rafters and trusses. 0.50 mm thick, the profile detail width 1044/920 mm,cover width1000/875 mm.(As per26.19.1)

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer),of I st quality conforming to IS:15622,of approved make, in all colours, shades,except White,Ivory, Grey, Fume Red Brown, laidon 20mm thick bed of cement mortar 1:4(1cement:4Coarsesand),including pointing the joints with white cement and matching pigments etc., complete.

Providing and fixing I st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make,in all colours,shades except burgundy,bottle green,black of any size as approved by Engineer-in-Charge, inskirting, risers of steps and dados,over 12mm thick bed of cement mortar1:3 (1cement: 3coarse sand)and jointing with grey cement slurry @3.3 kg per sqm,including pointing in white cement mixed with pigment of matching shade complete.

Supplying and fixing PVC door with frame in locality available best quality including cost of materials, necessary, fittings labour charges for fixing the door etc.complete

Providing and fixing white vitreous china pedestal type water closet(European type)with seatandlid,10 litre low level white vitreous china flushing cistern&C.P.flush bend with fittings &C.I.brackets,40 mm flush bend,over flow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets,cutting and making good the wall sand floors wherever required:W.c.pan with IS I marked black solid plastic seat and lid

Providing and fixing wash basin with C.I.brackets,15mm C.P.brass pillar taps,32mm C.P.brass waste of standard pattern,including painting of fittings and brackets,cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P.brasspillartap

Providing and fixing wall mounted type Stainless Steel wash basin of size 3.00m x 0.50 x 0.45 with C.I.brackets,6 nosof15mm C.P.brass pillar taps,32mm C.P.brass waste of standard pattern,including painting of fittings and brackets,cutting and making good the walls wherever required

Providing and fixing C.P.brass long body bibcock of approved quality conforming toIS standards and weighing not less than 690 gms.15mm nominal bore

Providing and fixing PTMT grating of approved quality and colour. Rectangular type with openable circular lid 150 mm nominal size square 100 mm diameter of the inner hinged round grating

Providing and fixing PVC pipes, fittings including fixing the pipe with clampsat1.00m spacing.This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia10Kgf/cm2- Internal work- Exposed on wall

Providing and fixing PVC pipes, fittings including fixing the pipe with clampsat 1.00 m spacing.This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia10Kgf/cm2-External work-Exposed onwall

Providing and fixing PVC pipes,fittings including fixing the pipe with clampsat 1.00m spacing.This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work,including cutting chased and making goodt he wall etc.110mmpipe6kgf/cm2

Providing and fixing PVC pipes,fittings including fixing the pipe with clampsat1.00m spacing.This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.Concealed work including cutting chases and making good the wall etc.63mm pipe 6Kgf/cm2

Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes,including jointing with PVC solvent cement-110mm dia End Cap

Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes,including jointing with PVC solvent cement-110mm dia Vent cowl

Providing and fixing PVC pipes,fittings including fixing the pipe with clampsat1.00m spacing.This includes jointing of pipes &fittings with one step PVC solvent cement and testing of joints complete asper direction of Engineer-in-Charge.Concealed work,including cutting chases and making good the wall etc.50mm pipe 6kgf/cm2

Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement-110mmdiaBend

Providing and fixing PVC pipes,fittings including fixing the pipe with clampsat1.00mspacing.This includes jointing of pipes& fittings with one step PVC solvent cement and testing of joints complete as per direction ofEngineer-in-Charge.Concealedwork,includingcuttingchasesandmakinggoodthewalletc.25mmpipe10kgf/cm2

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with standard flush pipe and C.P. brass spreaders with brass union sand G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required (Asper17.4.1.)

Providing and laying 80mm thick factorymade cement concrete interlock paver block M-30 grade by block making machine with strong vibratory compaction of approved size design &shape in required color and pattern over and including 50mm thick bed of coarse sand ,filling the joints with fine sand etc all complete as per th