Kerala

Active

Works

Civil Works - Roads

SO 71/27, Ward 16-Ward 16 Parakkattumala canal bund road Vayanakkode Puliyampuram puthoth temple road tile laying,tarring

Local Self Government Department

Kalamassery | Ernakulam, Kerala

Amount: ₹14.8 LCloses: 12 Oct 2026Due today

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published6 Oct 2026
Closes12 Oct 2026
Bid Opening14 Oct 2026

Tender Value

₹14.8 L

EMD Value

₹37,068

Closing Date

12 Oct 2026, 6:00 pmDue today

Tender Inviting Organisation

Name

Assistant Engineer

Address

Office of the Assistant Executive Engineer, LIDEW Section, Kalamassery Municipality

Work Description

SO 71/27, Ward 16-Ward 16 Parakkattumala canal bund road Vayanakkode Puliyampuram puthoth temple road tile laying,tarring

Tender Information

Tender ID

2026_LSGD_876180_26

Reference Number

LIDEW/AEE/ET/05/2027

Tender Type

Open Tender

Product Category

Civil Works - Roads

Form of Contract

Item Rate

Period of Work

180 days

Location

Kalamassery

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical/Finance

RequiredFORM OF TENDER PART VI ITEM NO.1 (.pdf)

RequiredPRELIMINARY AGREEMENT PART VI ITEM NO2 (.pdf)

RequiredIntegrity Pact PART VI ITEM NO,EPAYMENT FORM (.pdf)

RequiredSTANDARD BID DOCUMENT (.pdf)

RequiredAFFIDAVIT PART VI ITEM NO4 (.pdf)

RequiredLICENSE CERTIFICATE,ADHAR,PAN,GST (.pdf)

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹2,760

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹37,068

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

6 Oct 2026

Published

6 Oct 2026

Bid Opening

14 Oct 2026

Download Starts

6 Oct 2026

Download Ends

12 Oct 2026

Submission Starts

6 Oct 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (7 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Tarring
1.001	3.2:Preparation of Foundation for Embankment Scarifying Existing Bituminous Surface to a Depth of 150 mm by Mechanical Means Scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per Technical Specification Clause 301.4.	580	sqm	-	-
1.002	4.1.A.1:Granular Sub-base with Well Graded Material (Table 400.1) (A) By Mix in Place Method Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (i) For Grading I Material	46.75	cum	-	-
1.003	OD112665/2026-2027:Interlocking Concrete Block pavement Providing and Laying of Interlocking Concrete Block pavements using 80mm M40 hydralic blocks of approved size,design and shape laid in crushed stone chipping 6.7mm size 100mm passing 9.5mm and retained on 2.36mm using plate vibrator etc.as per the departmental specification	570	sqm	-	-
1.004	75.8.1.1.A:Providing Plain cement concrete for wearing coat CC 1:2:4 (1 cement: 2 fine aggregate:4 course aggregate) laid to required slope as required including compaction, finishingand tamping etc .complete. Max. size of course aggregate not exceeding 25mm , mixedin concrete mixer etc complete as per specification (i) Nominal mix (1:2:4)	6.84	cum	-	-
1.005	75.5.5.B.2pb:Modified Penetration Macadam 75 mm thick using Bitumen S-65 - Packed Bitumen Rates Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506.	210.96	sqm	-	-
1.006	75.5.2.1pb:Tack Coat - With Packed Bitumen Rates Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.	1,440	sqm	-	-
1.007	75.5.11.1.A.2pb:Mix Seal Surfacing - Manual Means - Type A - Bitumen S-65 - Packed Bitumen Rates Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509 By Manual Means Type A (II) Bitumen (S-65)	1,440	sqm	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.30 MB

Work Item Documents

BOQ_1489021.xls

BOQ • 0.25 MB

sbd26.pdf

Tender Documents • 2.38 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Tarring
1.001	3.2:Preparation of Foundation for Embankment Scarifying Existing Bituminous Surface to a Depth of 150 mm by Mechanical Means Scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per Technical Specification Clause 301.4.	580	sqm	-	-
1.002	4.1.A.1:Granular Sub-base with Well Graded Material (Table 400.1) (A) By Mix in Place Method Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (i) For Grading I Material	46.75	cum	-	-
1.003	OD112665/2026-2027:Interlocking Concrete Block pavement Providing and Laying of Interlocking Concrete Block pavements using 80mm M40 hydralic blocks of approved size,design and shape laid in crushed stone chipping 6.7mm size 100mm passing 9.5mm and retained on 2.36mm using plate vibrator etc.as per the departmental specification	570	sqm	-	-
1.004	75.8.1.1.A:Providing Plain cement concrete for wearing coat CC 1:2:4 (1 cement: 2 fine aggregate:4 course aggregate) laid to required slope as required including compaction, finishingand tamping etc .complete. Max. size of course aggregate not exceeding 25mm , mixedin concrete mixer etc complete as per specification (i) Nominal mix (1:2:4)	6.84	cum	-	-
1.005	75.5.5.B.2pb:Modified Penetration Macadam 75 mm thick using Bitumen S-65 - Packed Bitumen Rates Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506.	210.96	sqm	-	-
1.006	75.5.2.1pb:Tack Coat - With Packed Bitumen Rates Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.	1,440	sqm	-	-
1.007	75.5.11.1.A.2pb:Mix Seal Surfacing - Manual Means - Type A - Bitumen S-65 - Packed Bitumen Rates Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509 By Manual Means Type A (II) Bitumen (S-65)	1,440	sqm	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Tarring

1.001

3.2:Preparation of Foundation for Embankment Scarifying Existing Bituminous Surface to a Depth of 150 mm by Mechanical Means Scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per Technical Specification Clause 301.4.

580

sqm

1.002

4.1.A.1:Granular Sub-base with Well Graded Material (Table 400.1) (A) By Mix in Place Method Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (i) For Grading I Material

46.75

cum

1.003

OD112665/2026-2027:Interlocking Concrete Block pavement Providing and Laying of Interlocking Concrete Block pavements using 80mm M40 hydralic blocks of approved size,design and shape laid in crushed stone chipping 6.7mm size 100mm passing 9.5mm and retained on 2.36mm using plate vibrator etc.as per the departmental specification

570

sqm

1.004

75.8.1.1.A:Providing Plain cement concrete for wearing coat CC 1:2:4 (1 cement: 2 fine aggregate:4 course aggregate) laid to required slope as required including compaction, finishingand tamping etc .complete. Max. size of course aggregate not exceeding 25mm , mixedin concrete mixer etc complete as per specification (i) Nominal mix (1:2:4)

6.84

cum

1.005

75.5.5.B.2pb:Modified Penetration Macadam 75 mm thick using Bitumen S-65 - Packed Bitumen Rates Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506.

210.96

sqm

1.006

75.5.2.1pb:Tack Coat - With Packed Bitumen Rates Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.

1,440

sqm

1.007

75.5.11.1.A.2pb:Mix Seal Surfacing - Manual Means - Type A - Bitumen S-65 - Packed Bitumen Rates Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509 By Manual Means Type A (II) Bitumen (S-65)

1,440

sqm