PROVN OF TOILET BLOCK AND OTHER LBW WORKS AT GULMARG UNDER GE 969 EWS.

Amount

Excavation in trenches in any type of soil, n.exc 1.50 M wide and n.exc 1.5 M deep for foundation, etc or for shafts, wells, manholes etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in any type of soil complete all as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. Or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out and additional 1.5m or part thereof in first 1.5 m depth beyond the first 1.5 m complete all as directed.

M&L Cement concretein foundations, filling and mass concrete type D-2 1:4:8 ( 40 mm graded crushed stone aggregate) complete all as directed.

M & L Walling of random rubble ,uncoursed,well bonded,and solidly hearted, built in CM (1:6) complete all as directed.

All as per srl item No 4 above but except stone complete all as directed.

M&L for PCC 1:3:6 type C-2 ( 40 mm graded crushed stone aggregate) in foundations, filling and mass concrete complete all as directed.

Returning filling in including spreading levelling, watering and well ramming in layers n.exc 25 cm all as speciifed.

Removing of excavated soil not exceeding 50 m and depositing where directed at a level n.exc 1.50 m above the starting point all as directed by Engr-in-Charge.

Providing cement concrete Type B-1, 1:2:4 (20 mm graded crushed stone aggregate) as in copings plinth Courses, bond stones including use of form work all as specifiedand directed.

M&L Providing Coping , cement concrete 40 mm thick type C1 1:3:6, ( 20 mm graded crushed stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as directed.

M&L Precast cement concrete block masonry with hollow blocks type C1 , 1:3:6 ( 20 mm graded crushed stone aggregate) asonry exc. 10cm in width and setting in cement mortar 1:6 all as directed.

M&L Precast cement concrete block masonry with hollow blocks type C1 , 1:3:6 (using 20 mm graded crushed stone aggregate) as in masonry 10cm in width and setting in cement mortar 1:6 all as directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as directed.

Rendering 15 mm thick cement plaster in cement mortar 1:6 on fair faces of brick/stone work or concrete surfaces in couding finishing the surfaces even and smooth with out using extra cement complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying three coat of white wash complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for preparation of new surfaces of walls and applying two coats of Oil bound distemper over a coat of priming on plastered and other surfaces with alkali resistant priming paint complete all as specified as directed by engr-in-charge.

M&L for hard core of gauge not exceeding 63 mm of broken stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and ramm to true surface complete all as directed.

M&L 100 mm thick cement concrete type D2, 1:4:8 (using 20 mm graded crushed stone aggregate) as in sub base of flooring, complete all as specified.

M&L 75 mm thick cement concrete type D2, 1:4:8 (using 40 mm graded crushed stone aggregate)) as in sub base of flooring, complete all as specified.

M&L 75 mm thick cement concrete type C2, 1:3:6 (using 20 mm graded crushed stone aggregate) as in plinth protection and similar works including finishing the surface of concrete topping even and fair, without using extra cement compoete all as specified.

Roof trusses, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing ( beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. (unframed work).

Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, complete all as specified and directed.

Mild steel TMT bars 10 mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed not less than 0.9 mm dia) complete all as specified and as directed.

Mild steel TMT bars 6 mm dia and over up to and including 10 mm dia in stirrups, spacers and binders, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed not less than 0.9 mm dia ) complete all as specified and as directed.

M&L for form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter for fair finished surfaces in any position flat or curved complete all as specified.

M&L for form work to sides and soffits of floor or roof beam, haunchings, girders, bressumers, lintels, cantilvers etc,also splays between floor and beams, etc, in rough finished surface of concrete.

M&L for RCC ,Nominal Mix 1:1:5:3 (20 mm graded stone aggregate) as in foundations, including rafts,footings, foundations beams,plinth beam, bases for columns etc basement slabs, under rammed piles and mass concrete, complete all as specified. beams cantilvers, bressummers, lintels over 1.5 m span, complete all as specified.

M&L for RCC ,Nominal Mix 1:1:5:3, (20 mm graded crushed stone aggregate) as in beams, columns,cantilvers, brassumers, lintels over 1.50m span and the like complete all as specified.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M & L 0.63 mm thick galvanised , corrugated mild steel sheeting with two corrugation side lap , fixed with L-type or J- type or cranked hook bolts, in roofs,walls etc

S& F 0.80mm thick plain , galvanised , mild steel sheeting , in ridges, hips, valley gutters, drip and straight flashing ( length and girth as fixed ) , all as specified.

Preparing new Zinc (or galvanised) surfaces to receive paint, by coating with mordant solution including washing and cleaning complete all as directed.

S&F pvc door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as perspecification and drawing sown in SSR Part II, complete all as specified.

S&F factory made solid PVC moulded door shutter 30 mm thk (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channe having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part II, 2010 as specified.

S&F for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), hold fasts, wall ties hooks and similar artiles conforming to Fe-290 Gde E-165 complete all as directed.

S&F 125 mm long cast type anodised aluminium handles complete all as directed.

M/L MS butt hinges 100 medium weight cold rolled etc.complete all as directed.

S&F 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as directed.

S&F250 mm long Aluminium alloy sliding bolt with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolt of extruded sections or cast alu alloy. fabricated type, anodised 300 mm long all as directed.

S&F with 2nd class soft wood small fittings such as brackets of any type , latch and hinge blocks, shaped dooor and window stops and the like, including all necessary labours, articles n.exc 200 cu.cm each complete all as specified and as directed.

Cutting holes in brick walls built in cement mortar not exc half brick for inserting hold fast etc and making good dismantled portion in cement mortor 1:3 or cement concrete 1:2:4 Type B1 as required

Providing 25 mm thick cement concrete Type B-1, 1:2:4 (20 mm graded stone agg) including finishing the surface even and rough, complete all as specified.

S&F Non skid coloured ceramic tiles 300x300x6-7 mm thick in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15 mm thick screed bed in cement and sand mortar 1:, complete all as specified

S&F glazed ceramic coloured tiles in verticles surfaces of size 450x300x7 mm thick set and jointed in neat cement slurryy and pointed white or coloured cement to match tile surface over and including 10 mm thick plaster in cement andsand mortar 1:4, complete all as specified.

S&F 3 mm thick figured glass pin head type and glazing with oil putty in squares n.exc 0.50 sqm in each pne.

S&F steel ventilators with top hung shutter including hinges steel peg sta, compoete all as specified.

S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 75 mm bore pipe

Ditto as per item no 49 but 110 mm bore of pipe complete all as directed.

S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors for 75 mm bore pipe complete all as directed.

All as per item no 51 but 110 mm bore of pipe complete all as specified and as directed.

S&F for PVC (SWR) bend with access door inluding jointing with solvent cement 75 mm bore complete all as specified.

All as per item no 53 but 110 mm bore complete all as directed.

S&F PVC (SWR) vent cowl, plain including jointing with solvent cement 110 mm bore complete all as specified.

S&F PVC (SWR) floor trap plain with grating including jointing with solvent cement 75 mm bore complete all as specified.

S&F for (SWR) gully trap, plain with grating includingjointing with solvet cement 110 mm bore complete all as specified.

S&F Vitreous china squatting pan "Orissa pattern" size 580x440 mm white with integral foot rest(exclding flushing cistern and flush pipe) including connection to trap, etcand to flushing pipe, sntysyponage pipe, etc, complete making good to floor.

S&F PVC low level flushing cistern , sypmhonic action type, 10 ltr capacity with inlet ball valve and float and handle and including brackets & PVC bend pipe 90 cm long etc, complete all as specified.

S&F vitreous China wash basin, white, flat back size 550x400 mm including pillar tape, waste fitting chromium plated brass and rubber plug, procelain stopper, a pair of CI brackets, waste pipe and pillar tape etc. Complete all as specified.

S&F urinal, full vitreous China , white and full etc. Complete all as specified.

S&F urinal spreaders of PTMT ay colour for fixing with 15mm dia pipe ( minimum wt 60 gms) complete all as specified.

S&F tubular towel rail aluminium anodised 20 mm dia D-type 60 cm long betweeen flanges, including brackets and fixed to wall , complete all as specified.

S&F PVC connection 15 mm size, length 450 mm, with PTMT nuts,complete all as specified.

S&F pillar tap, CP fancy type of 15 mm with capstan heads, screwed down, high pressure, with or without lattered 'Hot or Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as directed.

S&F 20 mm bore stop valve fancy type chromium plated high pressure with crutch or butterfly handle, screwed both ends for iron pipe, complete all as specified.

S&F 15 mm bore angle cock, fancy type chromium plated high pressure with crutch or butterfly handle, screwed both ends for iron pipe, complete all as specified.

S&F 1000 ltr capacity rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all all as specified in SSR part -I.

S& F 25 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (minimum weight 25mm-210 gms, complete all as specified.

S&F compound girders and stanchions, lattic girders aerial masts, staging for watrer tanks and the like including caps, bases, splices etc. Built up from two or more beam or channel sections or angles with plates including all lattic bars, stiffensers, gusset plates, etc. conforming to Fe-290(Gde-E-165) complete all as directed.

S&F 20mm outer dia of 3- layer PPR Polypropylene random copolymer concealed pipes SDR 7.4 (PN-16) unstalised and antimicrobial fusion welded having thermal stability for hot or cold water supply including all PPR pain & brass threaded polypropylene random fittings fixed complete to wall, celings or in floors.

S&F 25mm outer dia of 3- layer PPR Polypropylene random copolymer concealed pipes SDR 7.4 (PN-16) unstalised and antimicrobial fusion welded having thermal stability for hot or cold water supply including all PPR pain & brass threaded polypropylene random fittings fixed complete to wall, celings or in floors.

M&L for 6 mm thick veneered decorative Ply wood, grade 1 (with BWR resin) with decorative face veneers on one face has decorative veneer fixed with nails to timber frame work on ceiling etc.

S & F Second class soft wood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exceeding 6 and not exceeding 13 Sq. cm complete all as specified and directed.

Supply & Fixing mild steel flat iron as in wind ties over roof covering using steel of grade Fe-290 Gde E-165 including necessary drilling holes etc and similar works complete all as specified.

M&L steel iron base plate plugs, bolt and screw of Fe-410W (Gde-E-250 quality-A) complete all as specified and directed complete all as directed.

100 mm thick Cement concrete type B 1, 1:2:4 (using 20 mm graded crushed stone aggregate) , as in flooring and finishing cement concrete surface even and smooth without using extra cement etc complete all as specified.

Forming contraction dummy joint of 65mm deep x 10mm wide filled with sealing compound of grade 'A'.

Forming 12 mm thick expansion joints on 100 mm thick concrete slab filled with pre-formed bituminous filler and top 30 mm primed and sealed with sealing compound grade 'A'

Demolition of brick work, PCC block masonary, stone masonary or boulder masonry built in cement mortar complete all as specified ad as directed.

M & L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified ad as directed.

M&L Providing precast cement concrete in window or door cills, lintels, quoin blocks (for bressumers, steps, use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). and setting in CM (1:6) Type C1 1 :3:6 (20 mm graded aggregate) complete all as specified ad as directed.

M&L Boulder filling dry, handpacked tightly, as in in vertical bunds with sloping face complete all as specified ad as directed.

LLDPE Septic tank exc inordinary soil foundation in PCC 1:2:4 brick work in CM 1:4 RCC slab covers including RCC precast manhole cover having 6 mm plate embedded all arround/fiber reiforced cover with angle iron frame vent shaft and sludge chamber etc complete for 20 users complete all as specified in manufacture instructions.

Soakage well exc in ordinary soil foundation in PCC 1:3:6 well of honey combed and solid in M-25 concrete including intercepting chamber screen chamber brick work in 1:4 cm, RCC cover slab in M-25/RR masonary /filling with brick bats, complete of size 2.40 m dia x 3.00 m deep.complete all as specified and shown in drg No.CESZ/TD-1078/2011.

Cutting into existing manholes for connecting new drains pipe making good to pipes rendering cutting out existing benching for & forming branch channel (1/2 round of ¾ section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required internal dia of pipe 150 mm dia.

M&L Flush pointing to random rubble stone masonry, uncoursed or brought upto courses in cement mortar 1:4 including racking out joints/pointing in old or new work complete all as specified ad as directed.

M&L for 150 mm dia Reinforced concrete pipes, class NP3, laid and jointed complete with collars complete all as specified ad as directed.

M&L for concrete bed to drain pipes in PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate including packing under haunching against the sides of pipe after they are laid and tested for 150mm dia complete all as specified ad as directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces with WPC, finished even and smooth complete. (WPC shall be measured and paid separately) complete all as specified ad as directed.

M&L for for rendering 15mm thick in CM 1:4 on other than fair faces of brick work or concrete surfaces finished even and smooth complete.

Supply only integral water proofing compound complete all as specified and as directed.

S&F Rolled mild steel in joist channel, angle(size 50x50 x 6 mm th), or tee sections fixed independly, without connecting plates, etc (cut to ordinary length) of Fe 410w (Gde E250) gde A supplied and fixed complete.

M & L precast RCC man holes cover in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate.

M&L for point wiring in PVC casing caping with 1.5 Sqmm size multi stranded FRLS copper conductor cable 1.5 Sqm including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 1.5 Sqmm as earth continuity conductor.a) One light point/fan point/ex fan point controlled by one 5 Amps switch one way

S&F switch piano Flush type, single pole, one way 6 amp 240 volts, complete all as specified and as directed. Make: Anchor / Bajaj / Cona

Supply and fix ceiling rose 3 terminal / PVC/ Polycarbonate, isolated body.

S&F Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting complete all as specified and as directed.

S&F Distribution Board, SPN 4 Way, single door complete all as specified and as directed.

S & F MCB SP 6 to 32 Amps, 240 Volts, Gold plus MCB B Series complete all as specified and as directed.

S & F MCB SPN 6 to 32 Amps, 240 Volts, Gold plus MCB C Series complete all as specified and as directed.

S&F LED Lamp 10 W complete all as specified and as directed.

S & F Bulkhead luminaire comprising of high brightness LEDs 10W LED, IP-65 complete all as specified and as directed. Make : Bajaj Cat part. No BIBWP 10W LED or equivalent in Havells/PHILIPS/CG

Supply and fixing surface and wall mounted led tube light fitting 18W, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver including connection from ceiling rose to tube light with suitable size of flexible cable complete all as specified and as directed by Engr in Charge. Make : Havells/Bajaj/CG/Philips

S&F heavy duty exhaust fan of size 300 mm sweep, 1400 RPM complete all as specified and as specified and as directed. Make : Havells code No. Turbo Force SP

M&L for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.5 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 6 mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is ilnclusive of necessary earth work, RFR and removal etc .

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 sq mm 2 core .

Sand cushioning to underground electric cable all as per clause 19.75 of SSR Part-I

Sub class 'B' common kiln burnt clay building bricks, old size 230mmx115mmx75mm, laid at right angle along the cable over sand cushioning, as cable protection, complete, all as specified.

Supply & Fixing 25mm dia bore, 3- layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply will sustain - 250C, all PP-R plain & brass threaded polypropylene random fittings laid in trenches. complete all as specified & directed.

Cutting of existing GI pipe line of size 25mm dia and inserting new pipe line including all fittings complete all as directed.

Supply and fix PPR Gate Valves (Brass Insert) of 25 mm bore complete all as specified & directed by Engr-in-charge.

M&L for point wiring in PVC casing caping with 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated fire retardant cable of size 2.5 Sqmm as earth continuity conductor. compete all as specified and directed by Engr-in-charge.

S&F Switch socket combination 2 in1, 3 pin,5 and 15 Amps flush type,universsal complete all as specified and as directed.Make:Havells/ Anchor / Bajaj / Cona or equivalent

S&F Distribution Board, SPN 8 Way, Double door complete all as specified and as directed.

S & F MCB DP 40 Amps, 240 Volts, Gold plus MCB C Series Make:Havells/ L&T /Legrand or equivalent

M&L for 80 W Baybrite Flare, multi- functional LED luminaire for under canopy, Low- bay, Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium non integral IP66 lighting including all fixing arrangements of light (like brackets, nut & bolt etc) with ceiling . complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core. Compete all as specified and directed by Engr-in-charge.

M/S G M DAR AND SONS