Providing damaged Road Safety Interventions to the existing Major Bridge at Km 9/0-2 of NH 44 to NH 44 (Via) Gooty Town limits in Anantapuramu District (MDR)

Construction of precast VRCC railing of M20 grade using HBG crushed stone aggregate of size not exceeding 12 mm and fine aggregate conforming to table 1000-2 true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical posts not to exceed 2000mm, leaving adequate space between vertical posts for expansion including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges as per approved drawings and technical specifications for finished item of work as per MoRT&H Specification 2703, 1500, 1600, 1700(5th Revision)

Providing HYSD bars ( Fe-415 ) of different diameters, wrought and put up bars of all diameters including cost and conveyance of steel to site and all labour charges for fabrication of reinforcement including cutting, bending, binding rods, tying grills, placing them in position etc., complete including cost and conveyance of binding wire and all handling charges and operational charges etc., and including over lapping welding if required etc., complete for all R.C.C items for finished item of work as per standard drawings as per the directions of the Engineer-In-Charge and as per MoRT&H specification 1600 & 2300 (5th Revision) and as p er I.S.1786 of 1985 for Super structure of RCC items.

Plastering 20 mm thick in two coats with base coat of 16 mm thick in CM (1:6) and top coat of 4 mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mxiing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-In-Charge etc., complete for Externla & Uneven surfaces of Birck wall and RCC exposed surfaces for finished item of work (SS 901, 903 & 904) for:- Plastering 2/c in CM (1:4) & (1:6) : 20 mm

Painting to new walls with 2 coats of acrylic emulsion paint of approved brand and shade over a based coat of approved cement primer grade I making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered matearials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 912 for external walls for :- External colouring - acrylic emulsion paint - 3 coats.

Supply and installation of Hazard markers Using M.S. Angle of size 55x55x6 mm and 120 cm high above ground level painted with two coats of black & white stripes of 15 cm wide with first quality synthetic enamel paint over one coat of appropriate primer of approved brand ,colour with 30 cm X 90 cm type – XI of ASTMD 4956-09 wide angle cube cornered micro prismatic retro reflective sheeting of yellow colour and confirming to IRC 67:2012 fixed over 3MM aluminum composite material having minimum 0.30 mm thick aluminum skin on both side with standard supports consisting of ultimately black and yellow with black stripes in screen printing sloping downward at an angle of 45 degrees towards the side of the obstruction on which the traffic is to pass and buried into the ground in a trench of size 30 cm X 30 cm and 50 cm depth filled with CC M-20 including cost and conveyance of all material equipment , machinery and labour with all leads and lifts, loading and unloading charges necessary for successful completion of the work any road division as directed by engineer – in charges and conforming to IRC 67 – 2012 & MORT&H specification No.805 and approved drawings etc., complete for finished item of work

Providing and fixing mandatory / regulatory sign boards of size 600 mm equivalent triangle made out of type-IV of ASTM-D 4956 high intensity prismatic retro reflective sheeting and confirming to IRC 67:2012 for full back ground of white colour and letters / logos done by screen printing in black colour, boarders by screen printing in REd colour and fixed over 3mm aluminium composite materials (ACM) sheet having minimum 0.30 mm thick aluminium skin on both sides with back side painted grey colour and fixed over bakc support frame of MS angle 25 x 25 x 3mm all round and fixing with 35x35x4 mm and mounted on a MS angle post of size 75x75x6 mm with clear height of not less than 2.1m from the ground level the bottom of the board. the signpost shoule be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint black and white colour with bands of 30 cm of height. the signpost shall be firmly fixed with MS base angle 35x35x4 mm into the grond by M-15 concrete foundation of size 450x450x600 mm including cost and conveyance of all materials, equipment, machinary for satisfactory completion of the work as directed by the Engineer-In-Charge.