Kerala

AOC

Works

Civil Works - Buildings

GENERAL-Providing two wheeler parking shed and other connected works to Legal Metrology Bhavan-Kakkanad-General Civil Work

Public Works Department

Kakkanaad | Ernakulam, Kerala

Amount: ₹5.9 LCloses: 30 Sept 2025Closed

Timeline

Published24 Sept 2025
Closed30 Sept 2025
Technical Evaluation6 Oct 2025
Financial Evaluation6 Oct 2025
Awarded21 Oct 2025

Bids

Item Rate

5 Bids21 Oct 2025

#	Company	Amount	Rank	Status
1	MOHAMMED SHAFEEK T A L1₹4.9 LAccepted-AOC HIGH COURT VENDOR RNAKULAM	₹4.9 L	L1	Accepted-AOC L1 Accepted.
2	SACHIN GEORGE L2₹5.0 L+₹6,904.53 (1.41%)Rejected-AOC KERALA KL \| IDUKKI \| KERALA \| 685533	₹5.0 L+₹6,904.53 (1.41%)	L2	Rejected-AOC L2 rejected
3	SAJID P P L3₹5.0 L+₹15,695.47 (3.22%)Rejected-AOC KERALA KL \| THRISSUR \| KERALA \| 680667	₹5.0 L+₹15,695.47 (3.22%)	L3	Rejected-AOC L3rejected
4	AKHIL T S Rejected-Technical	-	-	Rejected-Technical L5 REJECTED
5	SHAJAHAN PA Rejected-Technical PERUMAKUDY H VEMBILLY ERANAKULAM KERALA KL \| THRISSUR \| KERALA \| 680667	-	-	Rejected-Technical L4 REJECTED

BoQ Comparative

Line Items (15)

Sl No	Description	Qty	Unit	SACHIN GEORGE L2	MOHAMMED SHAFEEK T A L1	SAJID P P L3	AKHIL T S L5	SHAJAHAN PA L4
1.00Estimate
1.00	2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil	10.5	cum	250 ₹2,625	212 ₹2,226 Lowest	250 ₹2,625	533 ₹5,596.5	222.59 ₹2,337.2
1.00	5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources)	5.76	cum	9,000 ₹51,876	8,642 ₹49,812.49 Lowest	9,100 ₹52,452.4	10,660 ₹61,444.24	9,062.3 ₹52,235.1
1.00	5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete	65	sqm	300 ₹19,500 Lowest	318 ₹20,670	335 ₹21,775	690 ₹44,850	333.64 ₹21,686.6
1.00	5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more	338.64	kilogram	90 ₹30,477.6 Lowest	92.5 ₹31,324.2	96 ₹32,509.44	101 ₹34,202.64	97.14 ₹32,895.49
1.00	50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete	1.12	cum	7,000 ₹7,875	6,355 ₹7,149.38 Lowest	7,300 ₹8,212.5	8,200 ₹9,225	6,664.5 ₹7,497.56
1.01	13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	15	sqm	350 ₹5,250	304 ₹4,560 Lowest	320 ₹4,800	360 ₹5,400	319.47 ₹4,792.05
1.01	50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	535.38	kg	165 ₹88,338.36 Lowest	190 ₹1,01,722.96	190 ₹1,01,722.96	199 ₹1,06,541.42	199.52 ₹1,06,819.82
1.01	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	257.4	kg	140 ₹36,036 Lowest	154 ₹39,639.6	160 ₹41,184	205 ₹52,767	161.61 ₹41,598.41
1.01	12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	110	sqm	700 ₹77,000 Lowest	700 ₹77,000 Lowest	725 ₹79,750	800 ₹88,000	727.61 ₹80,037.1

Tender Value

₹5.9 L

EMD Value

₹14,822

Closing Date

30 Sept 2025, 3:00 pmClosed

Tender Inviting Organisation

Name

AEE

Address

Assistant Executive Engineer Buildings Sub Division Eranakulam

Work Description

GENERAL-Providing two wheeler parking shed and other connected works to Legal Metrology Bhavan-Kakkanad-General Civil Work

Tender Information

Tender ID

2025_PWD_791292_1

Reference Number

35/AEE/BL/EKM/2025-26

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Item Rate

Period of Work

120 days

Location

Kakkanaad

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Prefer Tender Documents.

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical/Finance

Required1. Scanned Copy of valid Registration Certificate Self attested by bidder and E Payment form in orig (.pdf)

Required2. Any other relevant docs (bank ,GSTcertificate,financialStatement,EMD exemption certificate etc.) (.pdf)

Required3. Tender Document and bid submission letter as per item no.1 part VI filled and signed by the bidde (.pdf)

Required4. Integrity pact certificate as Item No.3 part VI of bid docs filled and signed by bidder in origin (.pdf)

Required5 Affidavit as said items No.4 part VI of Bid docs in stamp paper worth RS.200/-attested by Notary (.pdf)

Required6.Preliminary agreement filled and signed as said item 2 part VI in bid docs in stamp papers Rs 200 (.pdf)

Required7. BOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹1,310

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹14,822

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

11 Nov 2025

Published

24 Sept 2025

Bid Opening

3 Oct 2025

Download Starts

24 Sept 2025

Download Ends

30 Sept 2025

Submission Starts

24 Sept 2025

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.05 MB

Technical Evaluation

tech_eval.pdf

PDF

Financial Evaluation

fin_eval.pdf

PDF

Award of Contract

aoc.pdf

PDF

Bid Opening Summary

finance_1304750.pdf

PDF

boq_comp_chart.xlsx

xlsx

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

MOHAMMED SHAFEEK T A

L1₹4.9 LAccepted-AOC

HIGH COURT VENDOR RNAKULAM

SACHIN GEORGE

L2₹5.0 L+₹6,904.53 (1.41%)Rejected-AOC

KERALA KL | IDUKKI | KERALA | 685533

SAJID P P

L3₹5.0 L+₹15,695.47 (3.22%)Rejected-AOC

KERALA KL | THRISSUR | KERALA | 680667

AKHIL T S

Rejected-Technical

SHAJAHAN PA

Rejected-Technical

PERUMAKUDY H VEMBILLY ERANAKULAM KERALA KL | THRISSUR | KERALA | 680667

Sl No	Description	Qty	Unit	SACHIN GEORGE L2	MOHAMMED SHAFEEK T A L1	SAJID P P L3	AKHIL T S L5	SHAJAHAN PA L4
1.00Estimate
1.00	2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil	10.5	cum	250 ₹2,625	212 ₹2,226 Lowest	250 ₹2,625	533 ₹5,596.5	222.59 ₹2,337.2
1.00	5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources)	5.76	cum	9,000 ₹51,876	8,642 ₹49,812.49 Lowest	9,100 ₹52,452.4	10,660 ₹61,444.24	9,062.3 ₹52,235.1
1.00	5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete	65	sqm	300 ₹19,500 Lowest	318 ₹20,670	335 ₹21,775	690 ₹44,850	333.64 ₹21,686.6
1.00	5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more	338.64	kilogram	90 ₹30,477.6 Lowest	92.5 ₹31,324.2	96 ₹32,509.44	101 ₹34,202.64	97.14 ₹32,895.49
1.00	50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete	1.12	cum	7,000 ₹7,875	6,355 ₹7,149.38 Lowest	7,300 ₹8,212.5	8,200 ₹9,225	6,664.5 ₹7,497.56
1.01	13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	15	sqm	350 ₹5,250	304 ₹4,560 Lowest	320 ₹4,800	360 ₹5,400	319.47 ₹4,792.05
1.01	50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	535.38	kg	165 ₹88,338.36 Lowest	190 ₹1,01,722.96	190 ₹1,01,722.96	199 ₹1,06,541.42	199.52 ₹1,06,819.82
1.01	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	257.4	kg	140 ₹36,036 Lowest	154 ₹39,639.6	160 ₹41,184	205 ₹52,767	161.61 ₹41,598.41
1.01	12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	110	sqm	700 ₹77,000 Lowest	700 ₹77,000 Lowest	725 ₹79,750	800 ₹88,000	727.61 ₹80,037.1

Sl No

Description

Qty

Unit

SACHIN GEORGE

MOHAMMED SHAFEEK T A

SAJID P P

AKHIL T S

SHAJAHAN PA

1.00Estimate

1.00

2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil

10.5

cum

250

₹2,625

212

₹2,226

Lowest

250

₹2,625

533

₹5,596.5

222.59

₹2,337.2

1.00

5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources)

5.76

cum

9,000

₹51,876

8,642

₹49,812.49

Lowest

9,100

₹52,452.4

10,660

₹61,444.24

9,062.3

₹52,235.1

1.00

5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

sqm

300

₹19,500

Lowest

318

₹20,670

335

₹21,775

690

₹44,850

333.64

₹21,686.6

1.00

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

338.64

kilogram

₹30,477.6

Lowest

92.5

₹31,324.2

₹32,509.44

101

₹34,202.64

97.14

₹32,895.49

1.00

50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete

1.12

cum

7,000

₹7,875

6,355

₹7,149.38

Lowest

7,300

₹8,212.5

8,200

₹9,225

6,664.5

₹7,497.56

1.01

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

sqm

350

₹5,250

304

₹4,560

Lowest

320

₹4,800

360

₹5,400

319.47

₹4,792.05

1.01

50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

535.38

165

₹88,338.36

Lowest

190

₹1,01,722.96

190

₹1,01,722.96

199

₹1,06,541.42

199.52

₹1,06,819.82

1.01

50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

257.4

140

₹36,036

Lowest

154

₹39,639.6

160

₹41,184

205

₹52,767

161.61

₹41,598.41

1.01

12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

110

sqm

700

₹77,000

Lowest

700

₹77,000

Lowest

725

₹79,750

800

₹88,000

727.61

₹80,037.1