Setting Up of E-Sewa Kendra in Portacabin in Combined Court Building Campus at Tiruvannamalai in Tiruvannamalai District

Earth work excavation for foundation by manual means for Isolated, Combined and Other type foundations in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2.00mts. and clearing and levelling the site, etc., complete complying with standard specification and as directed by the departmental officers.

Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the departmental officers. -Mixing by manual means

For Foundation and Basement

Supplying and erecting steel centering including necessary supports For plane surfaces such as rectangular or square RCC columns etc. which require only nominal strutting using mild steel sheets made of 10 gauge thick welded with MS angle size 40mm x 40mm x 5 mm and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick).etc..complete in all floors complying with standard specifcation. Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid).

For Foundation and Basement

Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers.

Supplying, fabricating, and transporting a fully finished 20' x 10' prefabricated office container. The side sheet has a thickness of 1.6mm, the roof sheet is 2mm thick, and the bottom sheet is 28mm thick. It features an 8mm MDF interior wall lining mounted on a 35x35mm wooden frame with thermocol insulation, a ceiling finish and finishing with 1mm thick Vinyl flooring. The container includes 6 work-stations, each of size 2'x4' with laminate finish and one executive MD table measuring 2'x 4 1/2' for the video conference room. Providing an additional 2 nos of MS entrance door with rain cutter and an internal access UPVC door closer and Stopper of size 3'x7'. Internal full partitions are included for the video conference cabin between e-sewa center. It has 5 nos of UPVC sliding windows with lock of size 3'x2' to improve lighting and ventilation. The electrical setup includes conduits, basic wiring, and 22-watt LED lights (6 nos), along with 2 nos of outer bulkhead lights and 6 nos of 6-amp switches & Sockets and 10 nos of 10-amp switches & sockets and provisions for 5 nos of wall-mounted fans of approved quality. This includes all costs for fabrication, fitting, outer two coat of enamel paint, finishing, loading, transportation, fixing in position and installation etc. complete complying with standard specification.

GST @ 18%