RequiredExperience with Government
RequiredAnnual Turnover
RequiredCertificate (Requested in ATC) Bid to RA enabled No Mobile Toilet ( 2 ) ( Under PAC ) Make prakhar Model prakhar8seat Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) GENERIC Mode of Supply Assembled Ready To Use Assembled Ready To Use
RequiredKnocked Down To Be Assembled At Consignee Site By The Seller
RequiredKnocked Down To Be Assembled At 1/10 Consignee Site By Consignee Himself Number of Compartments 8-seater mobile toilet 4-seater mobile toilet
Required6-seater mobile toilet
Required8-seater mobile toilet
Required10-seater mobile toilet Type of WC Indian with steel base Indian with steel base Number of WC 0 * Number of Bathrooms 0 * Number of Urinals 0 * Water facility By mean of overhead tank(Capacity 1000Ltrs) By mean of overhead tank(Capacity 1000Ltrs) Wash basin 2 Nos. outside the Unit with common facility 2 Nos. outside the Unit with common facility Sewage facility Sludge tank (capacity-1200ltrs) with 100mm outlet facility through butterfly valve and hose pipe(For 10-seater) Sludge tank (capacity-400ltrs) with 100mm outlet facility through butterfly valve and hose pipe(For 4-seater)
RequiredSludge tank (capacity-600ltrs) with 100mm outlet facility through butterfly valve and hose pipe(For 6-seater)
RequiredSludge tank (capacity-1400ltrs) with 100mm outlet facility through butterfly valve and hose pipe(For 8-seater)
RequiredSludge tank (capacity-1200ltrs) with 100mm outlet facility through butterfly valve and hose pipe(For 10-seater)
RequiredSludge tank (capacity-2000ltrs) with 100mm outlet facility through butterfly valve and hose pipe(For 10-seater)
RequiredProvision for directly connected to septic tank/sewage ventilation Two No. Two No. Top(roof) shape Slanting/tapper * Projection of Roof 50mm projection from front and 25mm projection on other sides(slanting shape) 50mm projection on all the four sides(slanting shape)
Required100mm projection from front and 50mm projection on other sides(slanting 2/10 shape)
Required50mm projection from front and 25mm projection on other sides(slanting shape)
RequiredNO projection Installation and commissioning To be done by seller To be done by seller
RequiredTo be done by Consignee himself Plumbing and Sanitation fitting connections To be done by seller To be done by seller
RequiredTo be done by Consignee himself Electrical connections To be done by seller To be done by seller
RequiredTo be done by Consignee himself Waste extraction fitting To be done by seller To be done by seller
RequiredTo be done by Consignee himself Civil foundation No foundation required No foundation required
RequiredRequired - To be done by seller
RequiredRequired - To be done by consignee himself TRAILER STRUCTURAL MATERIAL Trailer frame(Chassis) material with support material including pathway 100mm X 50mm C- channel MS - 75mm X 37.5mm C-channel MS - 40mm X 40mm X 5mm (thick) MS angle - 40mm X 40mm X 5mm (thick) MS Tee - 35mm X 35mm X 5mm (thick) MS angle and 25mm X 25mm X 3mm (thick) MS angle for 4-seater/6 -seater/8-seater and 10-seater 100mm X 50mm C- channel MS - 75mm X 37.5mm C-channel MS - 40mm X 40mm X 5mm (thick) MS angle - 40mm X 40mm X 5mm (thick) MS Tee - 35mm X 35mm X 5mm (thick) MS angle and 25mm X 25mm X 3mm (thick) MS angle for 4-seater/6 -seater/8-seater and 10-seater
Required75/70 X 40/35 mm channel section - 35 X 35 X 5 mm angle iron - 50 X 25 x 1.6 mm MS pipe and cross support of 20 X 20 X 1.6 mm MS pipe Railing material 38mm X 25mm MS pipe of thickness 1.2-1.5mm (for 4-seater
Required6-seater
Required8-seater & 10-seater) 38mm X 25mm MS pipe of thickness 1.2-1.5mm (for 4-seater
Required6-seater
Required8-seater & 10-seater)
Required38mm X 25mm SS pipe of thickness 0.6-0.8mm (for 4-seater
Required6-seater
Required8-seater & 10-seater)
Required20mm round pipe fixed on sliding platform Trailer Spring leaves 914mm Spring leaves 710mm 3/10 understructure with 13 leaves for 8-seater and 10-seater with 9 leaves for 4-seater and 6-seater
RequiredSpring leaves 914mm with 13 leaves for 8-seater and 10-seater Turn table/rotor 100mm X 50mm MS channel and 10mm thick MS plate plus spring ply 40mm X 5mm * Pathway passage/slide platform Aluminum chequerd sheet having width of 455mm * Stairs frame material 35mm x 35mm X 5mm MS angle and 25mm x 25mm x 3mm MS angle with 25mm x 3mm MS Flat * Stairs size 710mm X 230mm having 4-step for 1420mm Height and 735mm width stair * Locking Locking pins to be provided for lock the platform * Tow bar Made of 100 X 50 mm channel section with easy detachable and connect with turn table Made of 100 X 50 mm channel section with easy detachable and connect with turn table
RequiredWithout Tow Bar FRAME MATERIAL Side panel frame material 35mm X 35mm X 5mm(thick)
Required25mm X 25mm X 3mm(thick) MS angle (for 4-seater 6-seater/8-seater & 10-seater) 35mm X 35mm X 5mm(thick)
Required25mm X 25mm X 3mm(thick) MS angle (for 4-seater 6-seater/8-seater & 10-seater)
RequiredNo side frame structure Top(roof) frame material 40mm X 40mm X 5mm(thick)
Required35mm X 35mm X 5mm(thick)
Required25mm X 25mm X 3mm(thick) MS angle 40mm X 40mm X 5mm(thick)
Required35mm X 35mm X 5mm(thick)
Required25mm X 25mm X 3mm(thick) MS angle
RequiredNO top(roof) frame structure Top(roof) support frame structure 40mm X 5mm(thick)
Required35mm X 5mm(thick)
Required25mm X 3mm(thick) MS flat 40mm X 5mm(thick)
Required35mm X 5mm(thick)
Required25mm X 3mm(thick) MS flat
RequiredNO top(roof) support frame Partition frame material 35mm X 35mm X 5mm(thick)
Required25mm X 25 mm X 3mm(thick) MS 35mm X 35mm X 5mm(thick)
Required25mm X 25 mm X 3mm(thick) MS 4/10 angle angle
RequiredNO partition frame material Ventilation frame material 25mm X 25mm X 3mm(thick) flat MS * Door frame material 50mm X 25mm of 14-16gauge rectangular MS hollow pipe 50mm X 25mm of 14-16gauge rectangular MS hollow pipe
Required50mm X 25mm of 14-16gauge rectangular SS hollow pipe
RequiredNo door frame material Support material for Door panel fixing Aluminium U-channel of 18gauge Aluminium U-channel of 18gauge
RequiredSS U- channel of 18gauge
RequiredNo support material Door hinges(two numbers) 75mm size with 1.2-1.5mm thickness MS * Tank holder frame material 25mm X 3mm (thick) MS flat 25mm X 3mm (thick) MS flat
Required1125mm X 820mm outer ring(tubular structure)-MS PANEL MATERIAL Side panel material Zero spangled cold rolled 120 GSM galvanised(galvano) powder coated 40mm thick EPS panel(EPS Density-16Kg/CuM EPS thickness-38mm and steel sheet thickness 0.6mm 275MPA) 5mm thick ply core sandwich with 1mm thick FRP from both sides(5+1+1mm)
Required18 gauge MS sheet
RequiredFitted with plastic light weight LLDPE roto moulded
RequiredZero spangled cold rolled 120 GSM galvanised(galvano) powder coated 40mm thick EPS panel(EPS Density-16Kg/CuM EPS thickness-38mm and steel sheet thickness 0.6mm 275MPA)
Required18 gauge aluminum sheet
Requiredcorrugated steel sheet Top(Roof) panel material Zero spangled cold rolled 120 GSM galvanised(galvano) powder coated 40-70mm thick taper roof EPS panel(EPS Density-16Kg/CuM EPS thickness-38mm and steel sheet thickness 0.6mm 275MPA) 2mm thick FRP translucent sheet
Required5mm thick ply core sandwich with 1mm thick FRP from both side(5+1+1 mm)
RequiredZero spangled cold rolled 120 GSM galvanised(galvano) powder coated 40-70mm thick taper roof EPS panel(EPS Density-16Kg/CuM EPS 5/10 thickness-38mm and steel sheet thickness 0.6mm 275MPA)
Required4mm poly carbonate sheet fitted on top
RequiredFitted with plastic light weight LLDPE roto moulded
Required4mm polycarbonate sheet with U channel for water drain Door panel material Zero spangled cold rolled 120 GSM galvanised(galvano) powder coated with necessary stiffeners (steel sheet thickness 0.6mm 275MPA) 5mm thick ply core sandwich with 1mm thick FRP from both sides(5+1+1mm)
RequiredSingle layer 3mm thick FRP
RequiredZero spangled cold rolled 120 GSM galvanised(galvano) powder coated with necessary stiffeners (steel sheet thickness 0.6mm 275MPA)
RequiredOutside paneling of 18 gauge aluminum sheet(corrugated sheet)
RequiredFitted with plastic light weight LLDPE roto moulded partition panel material Zero spangled cold rolled 120 GSM galvanised(galvano) powder coated 40mm thick EPS panel(EPS Density-16Kg/CuM EPS thickness-38mm and steel sheet thickness 0.6mm 275MPA) 5mm thick ply core sandwich with 1mm thick FRP from both sides(5+1+1mm)
RequiredSingle layer 3mm thick FRP
RequiredZero spangled cold rolled 120 GSM galvanised(galvano) powder coated 40mm thick EPS panel(EPS Density-16Kg/CuM EPS thickness-38mm and steel sheet thickness 0.6mm 275MPA)
RequiredFitted with plastic light weight LLDPE roto moulded Floor material 5mm thick FRP material 5mm thick FRP material
Required1.5-2.0mm thick SS 304 material
RequiredFitted with plastic light weight LLDPE roto moulded
RequiredAnti skid tile finish floor inside toilet DIMENSION Size of each cubical(LXWXH) ± 25mm 915mm X 915mm x 1980mm 890mm X 840mm X 1980mm
Required915mm X 915mm x 1980mm
Required1220mm X 915mm X 6/10 1980mm
Required915mm X 435mm X 1955mm
Required1220mm X 1220mm X 1980mm
Required1000mm X 915mm X 2000mm
Required1143mm x 890mm x 1980mm
Required1778mm x 1143mm x 1980mm
Required3658mm x 2438mm x 1980mm
Required4877mm x 2438mm x 1980mm Door size(WxH) ± 20mm 585mm x 1830mm * Ventilation size(WXH) ± 10mm 838mm X 150mm(above door) plus 838mm X 75mm(opposite side) * Partition height ± 20mm 1830mm * Single pan size ± 10mm 580mm X 440mm with built in platform/footrest * Overall Length(mm) ± 25mm 4500mm for 8-seater * Overall Width including pathway(mm) ± 25mm 2700mm for 4/6/8 and 10-seater 2700mm for 4/6/8 and 10-seater
Required2438mm for 4 and 6 seater
Required3200mm (with path way) for 10(in two rows) seater and 2100mm without pathway Total height ± 25mm 3155mm * SEWAGE SUCTION UNIT Capacity of sewage suction unit N.A * Length of sewage suction unit ± 25mm N.A * Width of sewage suction unit ± 15mm N.A * Capsule Diameter N.A * Capsule Thickness N.A * Chassis size of sewage suction unit N.A * Suction pump N.A * Valve for sewage suction unit N.A * Axle for sewage suction unit N.A * 7/10 Tyres for sewage suction unit N.A * Spring leaves for sewage suction unit N.A * MISC Door locking bolts Size 100mm of MS * Tower bolt locking Tower bolt of MS size 75mm * Overhead Tank material made of double layer HDPE sheet * Wash basin material made of SS 304 * WC material made of FRP(fiber reinforced plastic) * Towel rail/ring made of plastic * Cloth hook made of plastic * P-trap material made of HDPE(75mm) * Footrest(WC) material made of FRP integrated with Indian WC and floor made of FRP integrated with Indian WC and floor
Requiredmade of SS 304 integrated with Indian WC and floor
Requiredmade of Ceramic integrated with Indian WC and floor
RequiredN.A Sewage tank material Sludge tank made of FRP 4mm(for 4-seater/6 -seater/8-seater & 10-seater) * Mirror size 455mm X 305mm 455mm X 305mm
Required380mm X 255mm
RequiredNO mirror Electric provision By mean of connection from external supply * Sewage provision Connected to bio- digester * Level indicator provision N.A * Water supply connection UPVC pipe connection with all toilet interconnecting * Seat cistern fitting By PVC flush pipe to toilet seat By PVC flush pipe to toilet seat
RequiredCeramic cistern to toilet seat
RequiredNO cistern Soap stand Plastic made Size:125 X 75 mm * Tap material HDPE push cock * 8/10 Base floor surface To be suitably slanted towards WC for proper drainage(for Indian WC) * Trailer Movement facility Two axle of 50mm X 50mm X 1828mm with 4-tyres of size 6.00 X 16 with hubs and bearings for 4-seater and 6-seater Two axle of 50mm X 50mm X 1828mm with 4-tyres of size 6.00 X 16 with hubs and bearings for 4-seater and 6-seater
RequiredTwo axle of 57mm X 57mm X 2133mm with 4-tyres of size 7.50 X 16 with hubs and bearings for 8-seater and 10-seater
RequiredOne axle of 50mm X 50mm X 1828mm with 2-tyres of size 6.00 X 16 with hubs and bearings for 4-seater and 6-seater
RequiredOne axle of 89mm X 89mm X 1676mm with 2-tyres of size 9.00 X 20 with hubs and bearings for sludge unit
RequiredOne axle of 89mm X 89mm X 1778mm with 2-tyres of size 9.00 X 20 with hubs and bearings for sludge unit
Requiredtwo axle onf 75 X 75 mm with hub of 8 bolt with bearing size 32213 with 4-tyres of size 7.5 X 16 Provision for vent pipe N.A * Water mug(standard size) Plastic made * Electric point 1 No. electric point to be provided in all toilet 2 watt LED * Stand provision to keep mobile toilet in static position To keep safe Tyre
RequiredTube
Requiredrim and their maintenance * COLOUR & FINISH Colour of cabin As per buyer's choice * Finish With Primer and Paint * CERTIFICATION Test reports to be furnished to buyer's on demand YES * OEM of offered product is ISO 9001:2015 certified NO * 9/10 WARRANTY Warranty period in number of years 1 1 * Bold specifications are the golden parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
