PROVN OF PCC DRAIN AT DIV OFFRS MESS COMPLEX, LLDPE SEPTIC TANKS WITH SOAKAGE WELL AT ECHO SECTOR, FOOTPATH OR TOILET AT COY, KHANPURA, WASHING POINT FOR OR MESS AT BLDG SP 117 AND 132 OF IDSR, RCC EMBANKMENT, IRON GRILL AND CHAIN LINK FENCING FOR TH

Amount

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth and getting out in hard/dense soil, Complete all as specified and directed by Eng-In-Charge.

Surface excavation n exc (not exceeding) 30cm deep and averaging 15cm deep and getting out soft/loose soil. Complete all as specified and directed by Eng-In-Charge.

M&L for hardcore of broken brick of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface, Complete all as specified and directed by Eng-In-Charge.

M&L for plain Cement concrete Type D-2, 1:4:8 (40mm graded aggregate), in foundation, filling and mass concrete.

M&L for Cement concrete 75mm thick type D-2, 1:4:8 (40mm graded aggregate) as in sub base. Complete all as specified and directed by Eng-In-Charge.

M&L for Cement Concrete Type B-1, 1:2:4 (20mm graded aggregate) 25mm thick. Complete all as specified and directed by Eng-In-Charge.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness, M-35 with grey cement and pigment over and including 15mm thick screed CM 1:4, Complete all as specified and directed by Eng-In-Charge.

M&L for salt glazed stone ware (drain pipe) 150mm dia laid in trenches and jointed Complete all as specified and directed by Eng-In-Charge.

M&L for brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 Complete all as specified and directed by Eng-In-Charge.

All as per Srl item No. 9 above but except bricks.

M&L for plain cement concrete 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) as in surface channels and drains/foundation, filling mass concrete. Complete all as specified and directed by Eng-In-Charge.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams sides and soffits (if any) of foundation and plinth beams; and similar work vertical or to batter Complete all as specified and directed by Eng-In-Charge.

M & L for form work to sides and soffits of floor or roof beam, beam hauchings, girders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs, etc, also splays between floor and beams, etc in rough finished surface of concrete.

M&L for 15mm thick cement plaster in cement mortar 1:4 on stone masonry on surface other than fair faces of brick work and finished surface even and smooth without using extra cement Complete all as specified and directed by Eng-In-Charge.

S&F mild steel TMT bars 10 mm dia and over, quality conforming to Grade 415 MPA cut to length , bent to shape required including cranking , bending and binding with mild steel wire (annealed) not less than 0.9mm dia.

S&F mild steel TMT bars 8 mm dia and over, quality conforming to Grade 415 MPA cut to length , bent to shape required including cranking , bending and binding with mild steel wire (annealed) not less than 0.9mm dia.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions. Complete all as specified and directed by Eng-In-Charge.

M & L for reinforced cement concrete (nominal mix) type B1 1:2:4 (20mm graded aggregate) in foundations, incl rafts, footings, foundation beams, plinth beams, bases for columns etc basement slabs, under-reamed piles and mass concrete Complete all as specified and directed by Eng-In-Charge.

M & L for reinforced cement concrete (nominal mix) type B1 1:2:4 (20mm graded aggregate), in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for Complete all as specified and directed by Eng-In-Charge.

S&F mild steel framed work such as grills, frame work of railing FE 290 Gde E-165. Complete all as specified and directed by Eng-In-Charge.

Excavation in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm.

M&L for PCC 1:3:6 Type C-2 (40mm graded aggregate) in foundations, filling and mass concrete. Complete all as specified and directed by Eng-In-Charge.

M&L for concrete bed to drain pipes in PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate including packing under haunching against the sides of pipe after they are laid and tested for 150mm dia. Complete all as specified and directed by Eng-In-Charge.

M&L for non skid coloured ceramic tiles 300x300x 7-8mm, or area of each tiles exc 0.06 sqm but n.exc0.11sqmthick in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15 mm thick screed bed in cement and sand mortar 1:4, Complete all as specified and directed by Eng-In-Charge.

All as per srl item No. 24 above but area of each tiles exc 0.18sqm but n.exc 0.38sqm as in floors.

All as per srl item No. 24 above but as in skirting,10 mm thick CM 1:4.

M&L for glazed ceramic tile 300 x 450 x 6-7mm thick (coloured) on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick plaster in cement and sand mortar 1:4 Complete all as specified and directed by Eng-In-Charge.

S&F vitrified ceramic coloured (any colour) light shade tiles 9-10 mm thick (square/rectengular) polished, area of each tile n. exc 0.36 sqm as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the surface ,incld screed bed 15 mm thick, 1:6. Complete all as specified and directed by Eng-In-Charge.

All as per srl item No. 28 above but as in skirting, 10mm thick CM 1:4.

S & F for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 75 mm bore of pipe.

S & F for PVC (SWR) floor bend, plain including jointing with solvent cement 75 mm bore complete all as specified.

S&F 15mm bib tap cast copper chormium plated alloy with capstan handle screwed down screwed for iron pipe or for brass ferrule or fixed in repairs. Complete all as specified and directed by Engr-in-Charge.

S&F for 15mm bore, 3-layer PP-R polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stbility for hot & cold water supply incuding all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors. Complete all as specified and directed by Engr-in-charge.

S&F for 20mm bore, 3-layer PP-R polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stbility for hot & cold water supply incuding all PP-R plain & brass t hreaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed by Engr-in-charge.

S&F mild steel sheeting 1.00mm thick below water tanks welded with steel sections. Complete all as specified and directed by Eng-In-Charge.

S&F rotational moulded polyethylene water storage tanks of 1000 litres capacity, triple layers (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, oulet and over flow pipe and provision of wash out pipe etc Complete all as specified and directed by Eng-In-Charge.

S&F 20mm dia for ball valve high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe and fixed.

M&L for 2000 ltrs capacity FRP moulded Anaerobic Septic Tank for an anaerobic design in which bacteria treats waste under most favourable conditions. The process effectively prevents rapid accumulation of sludge and suspended solids from passing through the system untreated with innovative engineering design of the inlet- outlet short circuit of wastewater which is prevented to ensure longg and enough retention time for effective treatment. Thus the effluent dose not contain any solid or scum that could clog up the pipe line.The septic tank is buried underground, solid and liquid waste flow into it. Heavy solid waste settle to the bottom of the septic tank (known as sludgge). The liquid wastes are also held in the septic tank while bacteria break down solids into liquids in an anaerobic environment. All that has to be done for fitting the tank is to fill the tank with water, connect the drain line to the inlet and outlet to the soak pit. Cover the manholes with the lids provided and tank is ready to use incl PCC 1:4:8 below foundation and vent shaft connection etc. Complete all as specified and directed by Eng-In-Charge.

M&L for 3000 ltrs capacity FRP moulded Anaerobic soak pit for an anaerobic treatment, soak pit latrines are rather rudimentary sanitation facilities at least serving to contain the spread of faecal organisms from the night soil organisms and faecal orgganisms in the soak pit. All that has to be done for fitting the tank is to fill the tank with water, connect the drain line to the inlet and outlet to the soak pit. Cover the manholes with the lids provided, incl PCC 1:4:8 below foundation and vent shaft connection etc. Complete all as specified and directed by Eng-In-Charge.

S&F MS work as in post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc: flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc, and simillar work conforming to Fe-290 Gde E-165, Complete all as specified and directed by Eng-In-Charge.

S&F for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long, Complete all as specified and directed by Eng-In-Charge.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts, etc. including provision of binding wire. Complete all as specified and directed by Eng-In-Charge.

Supply only chain link MS galvanised fencing, any size or type. Complete all as specified and directed by Eng-In-Charge.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth, not otherwise described and apply two coats of synthetic enamel paint over a coat of red oxide, Complete all as specified and directed by Eng-In-Charge.

M&L for rendering 15 mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces with using integral waterproofing compound including finishing the surface even and smooth without using extra cement Complete all as specified and directed by Eng-In-Charge. (Note:-W P C shall be measured and paid separately).

Returning filling in incl spreading leveling, watering and well ramming in layers n exc 25 cm. Complete all as specified and directed by Eng-In-Charge.

Removing excavated material (soils) exceeding 50mtr and depositing where directed at level not exceeding 1.5mtr above the starting point, Complete all as specified and directed by Eng-In-Charge.

Taking down chowkhats or frames exc 1.5Sqm but n.exc 4.00sqm each with shutters (without taking off shutters from the frame). Complete all as specified and directed by Eng-In-Charge.

Taking down chowkhats or frames n.exc 1.5sqm each with shutters (without taking off shutters from the frame). Complete all as specified and directed by Eng-In-Charge.

Taking down shutter exc 1.00sqm and n.exc 2.00sqm each & refixing in the same opening after resecuring or easing and adjusting shutters of any description complete. Complete all as specified and directed by Eng-In-Charge.

Dismantling timber scantling 40 sq cm and over in section in any position as in unframed work, Complete all as specified and directed by Eng-In-Charge.

Disamantling unframed work in fillets, rails, posts, rafters, purlins, etc under 40 sqcm in section.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets. Complete all as specified and directed by Eng-In-Charge.

Demolition of cement concrete (un-reinforced) in ground floor and paving n.exc 15cm thickness (below or ground level). Complete all as specified and directed by Eng-In-Charge.

Dismantling floor hearth or wall tiling including cement mortor bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises.

Taking down cement plaster on brick or stone walls,etc. including raking joints,hacking for key, scrubbing down with water etc.

Dismantling of plain or corrugated steel sheeting , any gauge and thickness in roof covering including Nainital or similar pattern roof covering Complete all as specified and directed by Eng-In-Charge.

Demolition of brickwork of stone/boulder masonry, built in cement mortar inlcuding all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles.

Taking down or up 15mm bore GI tubing including cleaning for refixing or removal to store etc. Complete all as specified and directed by Eng-In-Charge.

Taking down or up 20mm bore GI tubing including cleaning for refixing or removal to store etc. Complete all as specified and directed by Eng-In-Charge.

S& F 2nd class soft wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints including additional rebate for second shutter. Complete all as specified and directed by Eng-In-Charge.

S&F flush shutter 30mm thick solid core construction with block board core and ply wood face panels, commerials type on both side. Complete all as specified and directed by Eng-In-Charge.

S&F second class softwood 40mm thick plain framed, panelled shutter (any number of panels) with panels of timber flat on both sides (feather edged), or of veneered particla board medium density, wood particle board with commercial face veneers supplied and filled to chowkats. Complete all as specified and directed by Eng-In-Charge.

S&F 30mm thick 2nd class soft wood glazed and skelton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc for windows and ventilator. Complete all as specified and directed by Eng-In-Charge.

M&L solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube. Complete all as specified and directed by Eng-In-Charge.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitting in MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvant cement supplying and fixing in the frame at site. Complete all as specified and directed by Eng-In-Charge.

S&F 100mm size butt hinges extruded aluminium alloy with galvanised mild steel hige pin, anodised and fixed type C-21.

S&F aluminium anodised barrel tower bolt 150 mm long. Complete all as specified and directed by Eng-In-Charge.

S&F aluminium anodised barrel tower bolt 100 mm long. Complete all as specified and directed by Eng-In-Charge.

S&F 150 mm size aluminum handle cast type. Complete all as specified and directed by Eng-In-Charge.

S&F 300 mm long aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extuded sections or MS. Complete all as specified and directed by Eng-In-Charge.

S&F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of apperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples Complete all as specified and directed by Eng-In-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads. Complete all as specified and directed by Eng-In-Charge.

S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane Complete all as specified and directed by Eng-In-Charge.

M&L for 2nd class soft wood (kail) as in scantling clean sawn , fixed in repairs to replace old and decayed timber (including piecing, scarifying of old and new timbers if required) Complete all as specified and directed by Eng-In-Charge.

All as per item No 76 above but except timber.

M&L for plain fillets, square rectangular or triangular in section wrought, secured with nails or brad, 2nd class soft wood (kail) sectional area exc 13 sqcm but not exc 25 sqcm as in cover fillets complete ,Complete all as specified and directed by Eng-In-Charge.

M&L for Plain fillets, square rectangular or triangular in section wrought, secured with nails or brad, 2nd class soft wood (kail) sectional area exc 3 sqcm but not exc 6 sqcm as in cover fillets complete , Complete all as specified and directed by Eng-In-Charge.

S & F for 4mm thick veneered decorative plywood,grade 1 (with BWR resin) with decorative face veneers on one face fixed with nails to timber frame work in wall Complete all as specified and directed by Eng-In-Charge.

S & F for 4mm thick veneered decorative plywood,grade 1 (with BWR resin) with decorative face veneers on one face fixed with nails to timber frame work in ceiling Complete all as specified and directed by Eng-In-Charge.

M&L for 2nd class soft wood (kail) as in weather boarding, clean sawn, plain 20 to 25mm thick or feather edged 15mm to 20mm thick to give 20mm laps and fixed with 30mm laps, Complete all as specified and directed by Engr-in-Charge.

S&F second class softwood 20mm thick planed one side fascia boarding, fixed with nails in any situation (except flooring and skirting). Complete all as specified and directed by Engr-in-Charge.

M&L 40mm thick cement concrete type B-1, 1:2:4( 20mm graded aggrega te) finishing cement concrete surface even and smooth using extra cement. Complete all as specified and directed by Engr-in-Charge.

M&L for 75mm thick cement concrete type C-2, 1:3:6(40mm graded aggrega te) as in plinth protection finishing cement concrete even and fair without using extra cement making 10mm wide joints at each corner and at 3.00 mtr interveal filling the same with mestic filling i.e one part of bitumen 85/25 and 3part of sand. Complete all as specified and directed by Engr-in-Charge.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in wall, fixed with self tapping screws. Complete all as specified and directed by Engr-in-Charge.

All as per item No 86 above but plain sheet as in ridge.

S&F for 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc with grade of zinc coating 275, Complete all as specified and directed by Engr-in-Charge.

All as per Item No 88 above but except sheet.

S&F plain galvanised, mild steel sheeting 0.80mm thick, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, Complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces thick in CM 1:6 surfaces finished fair and even. Complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new plaster surfaces of walls and applying two coats of cement base paints to walls. Complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old surface including washing, rubbing down and stopping of OBD and painted surface of walls and applying one coat of oil distemper emulsion. Complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old surface including washing, rubbing down and stopping of distempered and painted surface of walls and applying one coat of cement base paint, Complete all as specified and directed by Engr-in-Charge.

M&L for preparing old treated wooden surfaces exceeding 10 cm width or girth and applying one coat of synthetic enamel paint including preparation of surface Complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new wood/wooden base surfaces of any discription not otherwise descrived over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer. Complete all as specified and directed by Engr-in-Charge.

M&L for prepration of old steel corruated steel surface and applying one coat of synthetic enamel paint on steel and iron surface. Complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old weather boarding surfaces of walls and applying two coats of cement base paint Complete all as specified and directed by Engr-in-Charge.

S&F for 25mm bore, 3-layer PP-R polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stbility for hot & cold water supply incuding all PP-R plain & brass t hreaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. Complete all as specified and directed by Engr-in-Charge.

S&F 110mm bore PVC (SWR) pipes single socket, in any length with rubber ring joints, laid in trenches or in floors. Complete all as specified and directed by Engr-in-Charge.

S&F rotational moulded polyethylene water storage tanks of 500 litres capacity triple layers(cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, oulet and over flow pipe and provision of wash out pipe etc Complete all as specified and directed by Engr-in-Charge.

S&F in repair stop angle valve cast copper alloy chromium plated 15mm dia screwed down, high pressure with capstan handle, screwed both ends for iron pipes or for unions and fixed, Complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) bends 110mm bore, Complete all as specified and directed by Engr-in-Charge.

S&F for PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm bore. Complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC connection 15 mm size with PTMT nuts of length 600 mm. Complete all as specified and directed by Engr-in-Charge.

S&F pillar taps 15mm fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.

S&F 25 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms) etc complete. Complete all as specified and directed by Engr-in-Charge.

S&F 20mm PP-R gate valves (brass insert) as per requirement of the site. Complete all as specified and directed by Engr-in-Charge.

S&F towel ring of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 90 gms). Complete all as specified and directed by Engr-in-Charge.

S&F in repair grating doom 100mm dia with waste hole of PTMT (min wt 25 grams) complete. Complete all as specified and directed by Engr-in-Charge.

S&F PVC valve less, syphonic action type flushing cistern, 10 ltr papacity low level, white, with inlet, ball valve, float and handle including brackets Complete all as specified and directed by Engr-in-Charge.

S&F vitreous china wash down closet pan and trap (pedestal pattern) white including connection to drain ( or outgoing pipe) and flushing pipe, antisyphonage pipe, etc but excluding flushing cistern and flushing pipe, fixed in repair, Complete all as specified and directed by Eng-In-Charge.

S&F plastic water closet seat closed pattern flat bottom and cover and mild steel chromium plated hinging device. Complete all as specified and directed by Engr-in-Charge.

S&F in repair vitreous china WHB, white, flat ack, size 550 x 400 mm, including cutting for and pinning in ends of brackets or erecting stand etc. Complete all as specified and directed by Engr-in-Charge.

E/M Portion:- Taking down carefully copper/aluminum point wiring (light. Fan, socket or power) complete, incl fittings such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc.

M&L for point wiring in PVC casing caping with 1.5 Sqmm size multi stranded FRLS copper conductor cable 1.5 Sqm including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 1.5 Sqmm as earth continuity conductor.(a) One light point/fan point/ex fan point controlled by one 5 Amps switch one way

All as per sr item no. 116 above but One 3 pin 5 Amp switch socket outlet on independent board.

M&L for point wiring in PVC casing caping with 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated fire retardant cable of size 2.5 Sqmm as earth continuity conductor. Complete all as specified and directed by Eng-In-Charge.

S&F in repair switch piano Flush type, single pole 6 amp 240 volts, Complete all as specified and directed by Eng-In-Charge.

Supply and fixing switch socket combination 2 in 1,3 pin, 15A/16 A box type universal. Complete all as specified and directed by Eng-In-Charge.

S&F switch -socket combination 2 in 1, 3 pin, 5 Amps, box type universal. Complete all as specified and directed by Eng-In-Charge.

Taking down fan, ceiling cable end, dismantling blades and removing fan and blades to store. Complete all as specified and directed by Eng-In-Charge.

Hanging only ceiling fan and connecting up incld provision of cable from ceiling rose or connector to fan. Complete all as specified and directed by Eng-In-Charge.

Supply and fixing ceiling rose 3 terminal / PVC/ Polycarbonate, isolated body. Complete all as specified and directed by Eng-In-Charge.

S&F in repairs Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting Complete all as specified and directed by Eng-In-Charge.

S& F VTPN Vertical type distribution boards(MCCB Incomer) 4 way (4+12 ) module, Complete all as specified and directed by Eng-In-Charge.

S & F in repairs MCB DB 12 way sheet metal enclosure SPN 240 volts, 50 Hz, with IP-42 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting Complete all as specified and directed by Eng-In-Charge.

S & F in repairs MCB DB 8 way sheet metal enclosure SPN 240 volts, 50 Hz, with IP-42 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting Complete all as specified and directed by Eng-In-Charge.

S & F in repairs MCB DB 4 way sheet metal enclosure SPN 240 volts, 50 Hz, with IP-42 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting. Complete all as specified and directed by Eng-In-Charge.

S & F MCB, SP 6-32 Amps 240 Volts Gold plus MCB B Curve. Complete all as specified and directed by Eng-In-Charge.

S & F MCB, SPN 6-32 Amps 240 Volts Gold plus MCB B Curve. Complete all as specified and directed by Eng-In-Charge.

S&F MCCB 3 Pole, 415 V, fixed type, 100 Amps with breaking capacity 16 KA, Complete all as specified and directed by Eng-In-Charge.

S&F MCCB 4 Pole, 415 V, fixed type, 63 Amps with breaking capacity 16 KA, optium 1.0 (Fixed TM range). Complete all as specified and directed by Eng-In-Charge.

S&F LED Lamp 9 W. Complete all as specified and directed by Eng-In-Charge.

S&F decorative ultra slim aluminium LED lighting fixture 22 W with high lumen output, environmental friendly, energy efficient ready to use pack. Complete all as specified and directed by Eng-In-Charge.

S & F Exhaust fan Non Metallic Range 250 mm. Complete all as specified and directed by Eng-In-Charge.

M&L for Sub main wiring with 2 runs of 6 sqmm PVC insulated multi stranded FRLS copper cable drawn through PVC casing capping of required size with accessories along with 1 run of 6 sqmm copper cable as earth continuity conductor including taking down the old existing submain wiring Complete all as specified and directed by Eng-In-Charge. Note :- Two runs of 6 sqmm and one runs of 6 sqmm cable as earth along with PVC conduit will be measured as one length.

M&L for XLPE insulated heavy duty electric cables with aluminium conductor, 1100 volts grade of cross sectional area 35 sq. mm 3.5 core. Complete all as specified and directed by Eng-In-Charge.

M&L for XLPE insulated heavy duty electric cables with aluminium conductor, 1100 volts grade of cross sectional area 25 sq. mm 3.5 core. Complete all as specified and directed by Eng-In-Charge.

Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is inclusive of necessary earth work, RFR and removal etc. Complete all as specified and directed by Eng-In-Charge.

S&F in repairs AC enclosure earth, plug and socket of approved make. Complete all as specified and directed by Eng-In-Charge.

S&F office pendent light. Complete all as specified and directed by Eng-In-Charge.