Annual repair and maintenance of non-residential building Circuit House Building at Distt. Mandi H.P. (Sub Head Providing and fixing steel work preprinted sheet roofing and painting/ polish works etc.)

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etcetra as required in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m (one point five metre) in width or 10 sqm (ten squaremetre) on plan), including dressing of sides and ramming of bottoms, upto any lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, upto any lead including carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and laying in position cement concrete 1:3:6 (one cement: three coarse sand : six graded, crushed stone aggregate 40mm (forty millimetre) nominal size excluding the cost of centering and shuttering in all works up to all floor level including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and laying to level or slope semi circular (half cut) reinforced cement hume pipe light duty non pressure pipe 1st (first) class NP2 600mm dia (six hundred millimetre diametre) for drain and foundation concrete 10cm.(ten centimetre) thick cement concrete1:3:6 (one cement : three sand: six graded crushed stone aggregate 40mm (forty millimetre) nominal size) and 15cm.(fifteen centimetre) cement concrete 1:2:4 (one cement : two sand: four graded crushed stone aggregate 20mm (twenty millimetre) nominal size) in sides including earth work and disposal of excavated earth complete in all respect within all leads, lifts carriage of material and other incidental complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing 0.60mm (zero point sixty millimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of polyster 5 (five) microns over 5 (five) microns primer coating including fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) diametre with prepainted limpet and rubber washers complete with all accesoriees as required including carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Polishing one or more coats on old stone work with polishing to give high gloss finish etcetera of approved brand and manufacture complete within all leads, lifts carriage of material and other incidental complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Wall painting two or more coats with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 (fifty) grams/litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour of approved brand and manufacture including carriage of material in all leads and lifts and other incidentals complete and as per the entire direction and satisfaction of Engineer-in-Charge.

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ (at the rate of) 0.90 ltr/10 sqm (zero point nine zero litre per ten square metre) over an under coat of primer applied @ (at the rate of) 0.75 ltr/10 sqm (zero point seven five litre per ten square metre) of approved brand and manufacture complete within all leads, lifts, carriage of material and other incidental complete in all respect as per direction of Engineer-in-Charge.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade two or more coats applied @ 0.90 ltr/10 sqm (at the rate of zero point nine zero litre per ten square metre) over an under coat of primer applied @ 0.80 ltr/10 sqm (at the rate of zero point eight zero litre per ten square metre) of approved brand and manufacture including carriage of material in all leads and lifts and other incidentals complete and as per the entire direction and satisfaction of Engineer-in-Charge.

Finishing walls with Acrylic Smooth exterior paint of required shade on old work (Two or more coat applied @ 1.67 ltr/10 sqm (at the rate of one point sixty seven litre per ten squaremetre) on existing cement complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge.