KIIFB WSS to Chazhur Thaniam and Anthikad Panchayath Package II

Amount

Supply, laying, testing and commissioning 400mm/300mmDI K9 CWPM from WTP sump, Chazhur to OHSRs at Thanniyam and Anthikadu and construction of OHSR'S at Thanniam & Anthikkadu and Road restoration work.

Clear water Pumping main (400,300DI K9 PIPE) -supplying 400mm dia.DI K9 Pipe conforming to IS 8329/2000 - 4394m, 400mm dia D/F DI Pipe-47m,250mm dia DI K7 pipe confirming to IS 8329/2000-41.00m,400mm Non return valve,PN1.6 -1No,250mm CI D/F sluice valve with hand wheel PN 1.6-5 Nos,400mm D/F sluice valve with hand wheel PN 1.6 -5 Nos,80mm CI D/F sluice valve with cap PN 1.6-6 Nos,80mm CI Kinetic air valve DS2-6 Nos,200m dia PVC pipe 6kg/cm2 - 44.31m, 300mm dia DI K9 Pipe conforming to IS 8329/2000 - 6212.40m, 150mm dia DI K9 pipe conforming to IS 8329/2000 - 37m , 250mm dia DI K9 Pipe conforming to IS 8329/2000 - 65m,300mm dia D/F DI Pipe - 15m, 200mm D/F CI sluice valve with hand wheelPN 1.0-1 no,-300mm CI D/F sluice valve with capPN 1.6-1No,150mm CI D/F sluice valve with cap PN 1.6-1no,250mm CI D/F Sluice valve with cap PN 1.6-1no,300mm CI D/F sluice valve with cap PN 1.0-4 nos, 250mm CI D/F Sluice valve with hand wheel PN 1.6-1No,200mm CI D/F S luice valve with hand wheel PN 1.6-3 nos,150mm CI D/F sluice valve with hand wheel PN 1.6-1no,80mm CI D/F sluice valve with hand wheel PN 1.6-5 nos,80mm CI kinetic air valve Type DS1-5 nos including pipe specials required like air valve, reducers, tail pieces,bends, tees, DI collar, air tees etc complete required for the completion of the work as per the direction of the departmental officers and scope of work.. And conveying, laying, cutting(using cutters), jointing(push on joints / flanged joints), testing, commissioning the pumping main (pipes / valves / specials) according to the alignment including excavating trenches in all kinds of soil,ordinary rock,medium rock,cutting bituminous /concrete roads with cutting machine ,bailing out, fencing, open timbering including struting and steel sheet shoring ,fabricating MS pipe, specials,mechanical joint with flanged tail pieces/flanged bend of suitable size with MS plate of 10mm thick, welding, grinding, providing wrapping coat using coal tar on outside of MS pipe of 10mm thickness,dismantling RR/concrete structures, other hurdles if any on the alignment and reconstructing the same after construction as per direction of the departmental officers in charge ,providing anchor blocks wherever necessary, construction of valve chamber -contruction of valve chambers-35nos of suitable size Including earth work excavation of all kind of soil,providing &laying in position CC1:3:6 all work up to plinth level,providing and laying CC 1:1.5:3 all work up to plinth level for cover slab,Providing and laying CC1:2:4 for base slab,side wall etc,Centering and shuttering including strutting etc and removal of form work, steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete using TMT bars of grade Fe-500D or more,12mm thick plastering using CM 1:4 etc complete as per scope of work and direction of Departmental officer in charge.

11LL capacity OHSR at Thanniam -Construction, Testing and Commissioning of 11LL Capacity OH Tank at thanniam in Thanniam Panchayath as per specification in the scope of works including clearing tank site,demolishing, dismantling and disposing off cement concrete (existing column foundation pcc, flooring), RCC work and brick work,dismantling dressed stone work ashlar face stone work,marble work or precast concrete work existing infront of tank, doors,windows,gate (steel work) as per direction of Engineer in charge, boring and providing and instaling cast in situ under reamed piles of specified diameters in M25 concrete (min) 750 mm dia or required as per site condition, conducting vertical load testing of piles in accordance with IS 2911 (Part IV),providing and laying CC1:3:6 up to plinth level for pile caps , providing laying reinforced CC (M30) for plinth beam, pilecap foundation, providing and laying in position machine batched and machine mixed design mix M30grade CC for columns,beams,intermediate floor slabs,stair slab upto 3rd brace level,walkway slab,tank floor slab & tank roof slab,staircase slab from 3rd brace level upto tank roof level ,side wall tank etc complete, providing laying richer mixes in all floor levels reinforced CC (M30) for plinth beam,columns,beams,intermediate floor slabs, staircase slab upto 3 rd brace level,lintel,sunshade etc complete,providing and laying in position specified grade of reinforced CC 1:2:4 for anchor blocks, centering and shuttering including strutting, propping etc and removal of form works for RCC work, steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete using TMT bars of grade Fe-500D or more, brick work in CM 1:6 for windows and rolling shutters, 12mm thick plastering using CM 1:4,1:3 wherever required, finishing wall with water proofing cement paint for side wall tank, intermediate floor slab,columns,beams and finishing wall with acrylic smooth exterior paint of required shade etc complete,cement concrete flooring 1:2:4 for flooring of room under OHSR , providing 110mm PVC pipe and tees for vent cowl,conveying and fixing wall casting pipe in the RCC slab/wall of tank, taking out C.I cover with frame painting with sythetic enamel paint for windows ,supplying and fixing rolling shutters, providing and fixing glazed shutters for windows etc complete,filling water in the tank, providing ang fixing pr cast R.C.C manhole cover, lettering with black japan paint,supplying and fixing mechanical water level indicators-1no,construction of temporary office room and toilet at tank compound,providing water supply and sanitary arrangements, lightening protection system to OHSR structure etc complete as per scope of work and direction of departmental officer in charge. Tank connection works supplying, conveying, laying (both vertically and horizontally) joining(Push on/Flanged), testing and commissioning of 400mm DI K9 D/F pipe-44m, 250mm DI D/Fpipe-150m,250mm DI K7 pipe -31m,250mm dia DI K9 pipe-28m,400mm dia DI K9 pipe-71m,400mm CI D/F sluice valve with hand wheel PN 1.6 - 2 nos, 250mm CI D/F sluice valve with hand wheel PN 1.6-7 Nos, including pipe specials required like reducers, tail pieces,bends, tees, DI collar, air tees etc complete required for the completion of the work as per the direction of the departmental officers and scope of work. And including excavating trenches for DI pipe/ specials for scour line and distribution main from existing OHSR, fencing,supplying and installation of 300mm electrmagnetic flow meter tested and caliberated at FCRI, Palakkad with battery backup of minimum 24 hours-2nos, supply erection of stanless steel metal box for housing the transmitter and battery of electro magnetic flow meter,providing joints and specials for C.I/ D.I pipesproviding joints and specials for C.I/ D.I pipes,testing,conveying and fixing C.I sluice valves,MS fabrication works such as pipes,Specials,Mechanical joints,Tail piece etc,documentation of componets and installation of sign board indicating details of WSS/ Component at thanniam OHSR compound etc complete as per the direction of Departmental officers in charge and scope of work. construction of valve chamber- contruction of valve chambers-11nos of suitable size Including earth work excavation of all kind of soil,providing &laying in position CC1:3:6 all work up to plinth level,providing and laying CC 1:1.5:3 all work up to plinth level for cover slab,Providing and laying CC1:2:4 for base slab,side wall etc,Centering and shuttering including strutting etc and removal of form work, steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete using TMT bars of grade Fe-500D or more,12mm thick plastering using CM 1:4 etc complete as per scope of work and direction of Departmental officer in charge. Construction of compound wall-including earth work excavation for all kind of soil,Demolishing brick work of damaged portion of existing compound wall,RR masonry CC 1:6 for foundation and basement for compound wall ,providing and laying CC 1:1.5:3 for compound wall belt,drain cover slab,Centering and shuttering including strutting etc and removal of form work, steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete using TMT bars of grade Fe-500D or more, brick work in CM 1:4 for compoundwall and pillar,12mm thick plastering using CM 1:4 ,pointing 1:3,finishing walls with Acrylic smooth exterier paint of required shades etc complete as per scope of work and direction of Departmental officer in charge

8.60LL capacity OHSR at Anthikkad Panchayath - Construction, Testing and Commissioning of 8.60LL Capacity OH Tank at Anthikkad Panchayath as per specification in the scope of works including clearing tank site,earth work excavation for pilecap foundation,for pipes in all kinds of soil,ordinary rock ,dismantling CI pipes and stacking with in 50 meters lead as per direction of Engineer in charge .Boring and providing and instaling cast in situ under reamed piles of specified diameters in M25 concrete (min) 600 mm dia,750mm dia or required as per site condition, conducting vertical load testing of piles in accordance with IS 2911 (Part IV),demolishing RCC work, providing and laying CC1:3:6 up to plinth level for pile caps foundation , providing laying reinforced CC (M30)for OH tank columns & linth beam between columns and for pile cap foundation,columns,intermediate floor slabs, staircase slab up to 3rd brace level ,lintel,sunshade,walkway slab,tank floor slab,staircase slab from 3rd brace level up to tank roof level,side wall tank & tank roof slab etc complete,providing laying richer mixes ai all floor levels reinforced CC (M30) for plinth beam,pilecap foundation,columns,beams,staircase slab upto 3 rd brace level,lintel,sunshade etc complete,providing and laying in position specified grade of reinforced CC 1:2:4 for anchor blocks, centering and shuttering including strutting, propping etc and removal of form works for RCC work, steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete using TMT bars of grade Fe-500D or more, brick work in CM 1:6 for windows and rolling shutters, 12mm thick plastering using CM 1:4,1:3 wherever required,finishing wall with water proofing cement paint for side wall tank, intermediate floor slab,columns,beams and finishing wall with acrylic smooth exterior paint of required shade etc complete,cement concrete flooring 1:2:4 for flooring of room under OHSR , providing 110mm PVC pipe and tees for vent cowl,conveying and fixing wall casting pipe in the RCC slab/wall of tank, taking out C.I cover with frame painting with sythetic enamel paint for windows ,supplying and fixing rolling shutters,providing and fixing glazed shutters for windows etc complete,filling water in the tank,providing ang fixing pr cast R.C.C manhole cover, lettering with black japan paint,supplying mechanical water level indicators-1no,construction of temporary office room and toilet at tank compound,providing water supply and sanitary arrangements,providing lightening protection system to OHSR structure etc complete, as per direction of Departmental officer in charge and scope of work. Tank connection work- supplying and laying (both vertically and horizontally) joining testing and commissioning of 400mm DI K9 D/F pipe-18.50m,250mm DI D/Fpipe-64.50m,400mm DI K9 -152m,200mm DI K9-80m,250mm DI K7 pipe -143m,250mm CI D/F sluice valve with hand wheel PN 1.6-2 Nos,400mm CI D/F sluice valve with hand wheel PN 1.0-1m, including DI K12 pipe specials required like reducers, tail pieces,bends, tees, DI collar, air tees etc complete required for the completion of the work as per the direction of the departmental officers and scope of work,Cutting bituminous /concrete roads for DI pipe(250mm,400mm DIA) ,fencing,conveying and laying DI pipes(200mm DI K9-80m,250mm k9-140m,250mm DI D/F pipe-64.50m,400mm DI k9-150m,400mm DI D/F pipe-18.50m) etc complete,lalying in position S&S flanged C.I specials,supplying and installation of 300mm electrmagnetic flow meter tested and caliberated at FCRI, Palakkad with battery backup of minimum 24 hours -1no,supply erection of stanless steel metal box for housing the transmitter and battery of electro magnetic flow meter,providing joints and specials for C.I/ D.I pipes,testing,conveying and fixing C.I sluice valves,fabrication works,documentation of componets and installation of sign board indicating details of WSS/ Component at thanniam OHSR compound etc complete as per the direction of Departmental officers in charge and scope of work. construction of valve chamber- contruction of valve chambers-4nos of suitable size Including earth work excavation of all kind of soil,providing &laying in position CC1:3:6 all work up to plinth level,providing and laying CC 1:1.5:3 all work up to plinth level for cover slab etc,providing and laying CC1:2:4 for base slab,side wall etc,Centering and shuttering including strutting etc and removal of form work, steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete using TMT bars of grade Fe-500D or more,12mm thick plastering using CM 1:4 etc complete as per scope of work and direction of Departmental officer in charge. Construction of compound wall-including earth work excavation for all kind of soil,RR masonry CC 1:6 for foundation and basement for compound wall ,providing and laying CC 1:1.5:3 for compound wall belt,Centering and shuttering including strutting etc and removal of form work, steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete using TMT bars of grade Fe-500D or more, brick work in CM 1:4 for compoundwall and pillar,12mm thick plastering using CM 1:4 ,pointing 1:3,finishing walls with Acrylic smooth exterier paint of required shades etc complete as per scope of work and direction of Departmental officer in charge

Road restoration-cherpu Thriprayar PWD Road-From Gayathri Bus stop on Perimbillisery Thriprayar road to peringottukara 3 way junction 3.947 km)-supply stacking spreading and consolidating of quarry muck, excavation for road work in soil with hydraulic excavator (3947m),supplying and stacking 36mm size hard brocken stone, construction of granular sub base-3330.282cum,providing laying and spreading and contacting graded stone agregate to wet mix mecadom ,providind and applying primer coat with bitumen emulsion(SS),providing bitumen levelling coarse, applying tack coat with bitumen emulsion, providing and laying bituminous mecadam with 80-100 TPH hot mix plant, bituminous concrete with 80-100 TPH etc complete Anthikkad hospital junction to vanitha sahakarana sangam,vanitha vyvasaya sahakarana sangam to smasanam (724m) - supply stacking spreading and consolidating of quary muck (724m) granular sub base /base /surface coarse with local material, wet mix meccadam ,prime coat,tack coat, seal coat etc complete. Thriprayar kanjani chavakkad road- from peringottukara 3 way junction to anthikkad hospital junction (5km)-Supply,stacking spreading and consolidating of quarry muck, excavation for road work in soil with hydraulic excavator(5000 m), construction of granular sub base and providing ,laying spreading ang compacting graded stone aggregate to wet mix meccadam, providing priming coat with bitumen emulsion ,supplying and stacking 12mm,6mm providing,laying and rolling of open graded premix carpet etc complete From chazhur WTP to Gayatri bus stop- Chazhur grama panchayath-(746m) supply stacking spreading and consolidating of quarry muck(746m),granular sub base/base/surface course with local material,wet mix meccadam ,prime coat,tack coat,seal coat etc complete as per direction of departmental officers in charge and scope of work.

Miscellanous works

Fire Hydrant in 400mm DI K9 CWPM& at OHSR - 4 nos Supplying 100mm dia GI pipe-8m,100mm dia D/F sluice valve conforming to IS 14846-2000 with cap PN 1.6-4 Nos,DI specials,gi specials etc. complete,The works includes earth work excavation in all kind of soil for valve chamber for fire hydrant at 400mm CWPM,300MM CWPM pipe lines,fencing,close timbering,brick work with cement mortar 1:6 etc complete,providing and laying in position cc 1:3:6 for construction of valve chamber for fire hydrant at 400mm CWPM,300MM CWPM pipe lines,Centering and shuttering including strutting etc and removal of form work,providing and laying in position cc1:1.5:3 for construction of valve chamber for fire hydrant base slab,cover slab,providing and laying in position cc1:2:4 for anchor blocks,Centering and shuttering including strutting etc and removal of form work or anchor block, steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete using TMT bars of grade Fe-500D or more,12mm thick plastering using CM 1:4,dry stone masonry for protection chamber etc complete,supplying and fixing ISI mark (make NEWAGE/WINCO) 100mm CI Hydrant valve with specials-4nos and full accessories,GI welding,supplying & fixing pillar hydrant unit-4nos, conveying and fixing 100mm barrel nipple-4 nos,conveying and fixing G.I pipes-8m,conveying and fixing CI 100mm sluice valve with cap -4 nos etc.complete as per scope of work and direction of Departmental officer in charge. Providing Inauguration stone and sign boards and documentation- Supplying, fixing, levelling , finishing and commissioning of inaugural stone- 2nos, documentation of components and installation of sign board indicating the details of WSS/component as per required size, shape and specification etc. as per the direction of departmental officers and NIT vol II.

Chicago Constructions International Pvt Ltd