Supply and installation of Furniture for Hostel and VIP Guest House at MGIRI, Wardha Maharashtra

BILL OF QUANTITIES of Furniture for VIP Guesthouse and Hostel Building at MGIRI Waradha.

Descriptio of Item REF IMAGE Unit Total Qty BASIC PRICE TOTAL PRICE Specifications

Supplying and placing in position of dining table as per Image.The rectangular dining table has a polished Veneer top and solid wood

construction finished in Rosewood for a moisture and scratch resistant finish . The stylised legs and compact design make this an

easy fit into any space. The Solid wood table is paired with 6 Dining Chairs for an elegant dining set. The Emerald Chair has a slatted

backrest and an upholstered cushion for a comfortable seat. Material: Solid Wood - Beech Wood. The unit should be complete as

specification under the guidance of Engineer in charge.

A) Dining Table Dimension: (L)1500mmX (W)900mm X (H)760mm

B)Dining Chair Dimension: (L)450mm X (D)525mm X (H)915mm

6 seater dining table

1 Grande pro 6 seater dininig table 2 ₹ 49,042 98,084.62

2 Grande Adv D Brwn Din Chr 12 ₹ 9,020 1,08,240.00

Supplying and placing in position of dining table as per Image.The rectangular dining table has a polished Veneer top and solid wood construction

finished in Rosewood for a moisture and scratch resistant finish . The stylised legs and compact design make this an easy fit into any space. The

Solid wood table is paired with 6 Dining Chairs for an elegant dining set. The Emerald Chair has a slatted backrest and an upholstered cushion for

3 Grande pro 4 seater dininig table 8 ₹ 35,185 2,81,480.00 a comfortable seat. Material: Solid Wood - Beech Wood. The unit should be complete as per image, and

specification under the guidance of Engineer in charge. 4 seater dining table:

Dimensions W x H x D (cm) 117 x 77 x 75

4 Grande Adv D Brwn Din Chr 32 ₹ 9,020 2,88,640.00 Dining Chair Dimension: (L)450mm X (D)525mm X (H)915mm

Providing, fixing and commissioning of Reception table of the following specifications. Work Surface - Made of 25mm Thick Pre-laminated twin

board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.

Access Flap provided on work surface for wire management.

Wire Management - Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8+3 Module cut out provision for Anchor Roma). This is

fixed with worktop along the width at

Access Flap position.

Modesty Panel & Side Skirting - Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990,

Edge banded with matching 2 mm thick PVC lipping.

Understructure - Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded

with matching 2 mm thick PVC lipping.

TOP shelf - Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with

5 reflection reception table 5ft 1 ₹ 70,743 70,743.00 matching 2 mm thick PVC lipping.

Hinge Door + Drawer unit - Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990,

Edge banded with matching 2 mm thick PVC lipping.

**Drawer bottom is made of 5.5thk MDF whiteboard

Handle is provided for ease of opening.

HDU and Drawer is provided with cam lock for security.

Essential Accessories - Wire Riser made of 0.8mm CRCA (IS-513) is provided for proper wire management.

Organizer Plate made of 1.2mm CRCA (IS-513) is provided for magnetic sticky notes.

Bag Hanger Hook made of 1.2mm CRCA (IS-513) is provided for bag hanging.

Length - 1500mm

The product should be certified by UL GREENGUARD GOLD,SCS INDOOR ADVANTAGE GOLD.

Providing, fixing and commissioning of 3 Seater Overall Size :Width :171cm Depth : 82cm Height :85cm Seating Height : 44cm & 1 Seater

Overall Size :Width : 80cm Depth : 82cm Height :85cm Seating Height : 44cm

UPHOLSTERY:TYPE:artificial leather , WEIGHT g/m2:575. Seasoned solid wood frame having undergone multi-step treatment for protection

against termites and bugs. High quality synthetic leather upholstery that can be easily cleaned using only a piece of cloth. Upholstery that is

resistant to cracking and fading, making it a durabile addition to your space

High backrest and spacious seating designed ergonomically for enhanced shoulder and neck support

Providing, fixing and commissioning of Alice coffee table

Overall Size : W x D x H - 1202 x 594 x 411mm

1. Body: All panels are made of 18mm Prelaminated Particle Board, with all exposed edges

having 2mm thick PVC edge banding. Middle horizontal panel provides storage area. Four

nylon bushes are provided.

2. Top: It has top surfaces made of glass & PLT panel. 8mm thick toughened glass with UV plate

glued on it. This glass is fixed with the side vertical panels. PLT top panel is hinged with side

7 alice pro coffee table 4 ₹ 24,577 98,307.68

vertical panels to open upwards.

3. Construction: Knock-down.

PLT panels are in WENGE shade having SUEDE finish.

UV guled plates under glass have SUNRAY finish.

5. Hardware: Dowels for knockdown assembly with high quality standard hardware like screw,

door hinges, bumpers, expanding sockets, nylon bushes etc.

Providing, fixing and commissioning of Edward Corner Table:

MATERIALS & SIZE :

Material: Plywood+ MDF + Solid wood legs

Color : Dark Wenge

Top Material: Plywood+ MDF

Frame Material: Plywood+ MDF

Leg Material: Solid wood ( Rubber wood)

Shoe material: Polypropylene

8 EdwardCornerTable 6 ₹ 18,509 1,11,053.82

Top Dimension: 600X600X18

Thickness of frame: 18

Thickness of understructure Legs: 68 (+/- 5)

Weight / unit (KG): 14 KG (+/- 4)

Overall LxWxH: 1200X600X455

Providing, fixing and commissioning of conference table of the following specificationswith overall size shall be 4200 X 1500 X 740.Work top-

Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2

mm thick PVC lipping.

Access panels provided with soft closing hinges.

Understructure-The Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and approved shade

conforming to IS-12823:1990, Edge banded withmatching 2 mm thick PVC lipping. Anodised aluminium alloy 63400 - WP profile is addedat

9 Mingle Conference Table 14 Seater 1 ₹ 1,59,777 1,59,777.00

bottom edges for improving the aesthetics. The product has a knock-down construction.

Wire Management-Bottom cabinet with door is provided for flow of wires and cables. Cutout provision belowAccess flap at four locations for

standard 8 module Anchor Roma is provided. Beside eachcutout, an additional cutout with plate is provided for mounting Audio Visual Cables

(eg.HDMI,VGA-A,etc).

CII GREENPRO,UL GREENGUARD GOLD,GRIHA,SCS INDOOR ADVANTAGE GOLD approved by the committee

Digitally signed by RAKESH

Providing, fixing and commissioning of Kareena High back

SEAT/BACK ASSEMBLY: The seat should be made up of 1.2 ±0.1cm. thick hot pressed plywood upholstered with fabric or synthetic leather and

moulded Polyurethane Foam. The back should be made up 1.2 ±0.1cm. thick hot pressed plywood and upholstered with replaceable fabric or

synthetic leather upholstery covers and moulded polyurethane foam. The back ply and foam should be designed with contoured lumber support

for comfortable seating posture.

BACK SIZE: 48cm.(W) X 76.0cm.(H)

SEAT SIZE: 51.0cm.(W) X 48.0cm.(D)

HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam for seat and back should be moulded with density = 45 +/-2 kg/m³ and

Hardness load 16 ± 2 kgf for 25% compression.

ARMRESTS :The armrest top should be made of moulded polyurethane (P.U) and mounted on to a drop lift height adjustable type M.S. tubular

armrest support chrome plated. The armrest height should be adjustable up to 6.5±0.5cm. in 5 steps .

KNEE TILT SYNCHRO mechanism WITH SEAT DEPTH ADJUSTMENT mechanism:

The mechanism should be designed with the following features:

• 360° revolving type single point control.

10 Kareena high back chair 4 ₹ 26,317 1,05,268.00

• Front pivot for tilt with feet resting on ground ensuring more comfort.

• Tilt tension adjustment.

• 4-position locking with anti-shock feature.

• Seat back tilting ratio of 1:2

• Seat depth adjustment of 6.0 ±0.5cm. can be locked in 6 positions

ADJUSTABLE BACKREST: The backrest consshould be ts of a sliding up down mechanism, which can be adjusted in the range of 7.5±0.5cm. and

can be locked in 5 positions for correct position of lumber support.

PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment of 10.0±0.3cm.

PEDESTAL ASSEMBLY: The pedestal should be fabricated from 0.2 ± 0.02 cm thick HR sheet . chrome plated and assembled with injection

moulded black polypropylene hub cap and 5 nos. twin wheel castors. The pedestal should be 66.0±0.5cm. Pitch-center dia. (76.0±1.0 cm with

TWIN WHEEL CASTORS The twin wheel castors should be injection moulded in black Nylon.

Overall Dimensions of Chair

Seat Height - min 47.5 to max 57.5cm.

Providing, fixing and commissioning of Kareena Midback

SEAT/BACK ASSEMBLY: The seat should be made up of 1.2 ±0.1cm. thick hot pressed plywood upholstered with fabric or synthetic leather and

moulded Polyurethane Foam. The back should be made up 1.2 ±0.1cm. thick hot pressed plywood and upholstered with replaceable fabric or

synthetic leather upholstery covers and moulded polyurethane foam. The back ply and foam should be designed with contoured lumber support

for comfortable seating posture.

BACK SIZE: 48cm.(W) X64.5cm.(H)

SEAT SIZE: 51.0cm.(W) X 48.0cm.(D)

HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam for seat and back should be moulded with density = 45 +/-2 kg/m³ and

Hardness load 16 ± 2 kgf for 25% compression.

ARMRESTS :The armrest top should be made of moulded polyurethane (P.U) and mounted on to a drop lift height adjustable type M.S. tubular

armrest support chrome plated. The armrest height should be adjustable up to 6.5±0.5cm. in 5 steps .

KNEE TILT SYNCHRO mechanism WITH SEAT DEPTH ADJUSTMENT mechanism:

The mechanism should be designed with the following features:

• 360° revolving type single point control.

• Front pivot for tilt with feet resting on ground ensuring more comfort.

11 Kareena Mid back chair 20 ₹ 24,145 4,82,900.00

• Tilt tension adjustment.

• 4-position locking with anti-shock feature.

• Seat back tilting ratio of 1:2

• Seat depth adjustment of 6.0 ±0.5cm. can be locked in 6 positions

ADJUSTABLE BACKREST: The backrest consshould be ts of a sliding up down mechanism, which can be adjusted in the range of 7.5±0.5cm. and

can be locked in 5 positions for correct position of lumber support.

PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment of 10.0 ±0.3cm.

PEDESTAL ASSEMBLY: The pedestal should be fabricated from 0.2 ± 0.02 cm thick HR sheet ( should be : DD 1079 / HR skin pass ), chrome

plated and assembled with injection moulded black polypropylene hub cap and 5 nos. twin wheel castors. The pedestal should be 66.0±0.5cm.

Pitch-center dia. (76.0±1.0 cm with castors).

TWIN WHEEL CASTORS The twin wheel castors should be injection moulded in black Nylon.

Overall Dimensions of Chair

Seat Height - min 47.5 to max 57.5cm.

Height - min 93.4 to max 110.4cm.

Width & Depth of Chair as measured from pedestal - Width-76.0 cm and Depth-76.0 cm.

Providing, fixing and commissioning of Shoe Cabinate. Overall Size :Width : 80cm Depth : 39.6cm Height :46.7cmMETAL MATERIALS : (gauge +/-

0.1mm) Material:SCREW WOODEN: DOWEL .DECORATION MATERIALS : (DENSITY / TYPE):Material(PVC/PU) :pvc , puMELAMINE , PVC , Color :

12 Godrej Shoe Cabinet M202 6 ₹ 12,103 72,618.00

Compact shoe cabinet with a soft cushion top to sit while wearing or removing shoes.

• Built with a special Melamine Faced Chipboard that adds to the product’s durability.

• Comes in different size options as a product family and can be combined with smaller cabinets

Providing, fixing and commissioning of Grande 6 seater dining table:

Dimensions W x H x D (cm) 117 x 77 x 75

Finish Color:Brown

Weight:50.00 kgs

Warranty:1 Year Warranty

⁠Primary Material:Wood

13 Grande Adv 4 seater dining table with chair 6 ₹ 71,265 4,27,590.00

Primary Material Subtype:Sheesham Wood

Providing, fixing and commissioning of Grande dining chair:

Dining Chair :Length : 45cm Width : 45cm Height : 95cm

Cushion Seat : Length : 45cm Width : 45cm Height : 50cm

METAL MATERIALS : (gauge +/- 0.1mm):Material:NUT & WASHER WOODEN MATERIALS :Material:SHEESHAM SOLID WOOD

Providing, fixing and commissioning of Sofa. Dimensions W x H x D (cm) 192 x 88 x 64 3 seater

Distinct-looking mid-back sofa with a curved backrest and angular wooden armrests. • Crafted from long lasting Sheesham wood, making it

extremely sturdy and resilient to insects, fungus, and mold. • Recron-filled cushions for back support, and soft foam for comfortable seating.

Colour & Material- Beige /FABRIC + SHEESHAM WOOD

14 Ceder 3 Seater Sofa 6 ₹ 92,190 5,53,140.00

Net Weight (kg)- 44

Finish Color- Beige

Seat Height (cm)- 45

Primary Material- Sheesham Wood

Providing, fixing and commissioning of Sofa. Dimensions W x H x D (cm) 86 x 88 x 64 1 seater

Distinct-looking mid-back sofa with a curved backrest and angular wooden armrests. • Crafted from long lasting Sheesham wood, making it

extremely sturdy and resilient to insects, fungus, and mold. • Recron-filled cushions for back support, and soft foam for comfortable seating.

Colour & Material- Beige /FABRIC + SHEESHAM WOOD

Net Weight (kg)- 44

Finish Color- Beige

Seat Height (cm)- 45

Primary Material- Sheesham Wood

Delivery Condition- Knock Down

Upholstery Material- Fabric

Providing, fixing and commissioning of Coffee Table.

Dimensions W x H X D (cm) - 90 x 40 x 90

Primary Material Subtype - Prelaminated Particle Board

16 Skyline coffee Table 6 ₹ 13,543 81,258.00 Finish Color - Black

Warranty - 1 Year

Net Weight (kg) - 42

Primary Material - Prelaminate Particle Board

Providing, fixing and commissioning of Corner Table.

Dimensions W x H X D (cm) - 60 x 60 x 45

Primary Material Subtype - Prelaminated Particle Board

17 Skyline Corner Table 12 ₹ 7,360 88,323.12 Finish Color - Black

Warranty - 1 Year

Net Weight (kg) - 42

Primary Material - Prelaminate Particle Board

Providing, fixing and commissioning of Media Unit .Overall Size

Depth - 381.0 mm

Width - 1500.0 mm

Height - 650 mm (w/o leveler)

Material Panels of Media Unit are made of 15 mm thick Prelaminated Particle Board of EN312, E2 grade. All the edges are edge banded with 0.8

mm thick PVC edge banding. Doors

18 Sienna Media Unit 6 ₹ 15,361 92,166.00 are made of 15 mm thick Prelaminated Particle Board of EN312, E2 grade. made of 15

mm thick Prelaminated Particle Board of EN312, E2 grade. Prelaminated Particle Board

of EN312, E2 grade. Back panel is made of 9mm thick prelaminated Particle Board of

EN312, E2 grade. is made of 9mm thick prelaminated Particle Board of EN312, E2

Hardware - High-quality hardware used like Hinges, minifix, dowels, Barrel nut, leveler, push to open mechanism

Construction - Knock Down construction

Providing, fixing and commissioning of Display Unit . Dimensions W x H X D - 60 * 37.5 *182 cm

Finish Color - Cinnamon

19 Sienna Display unit 6 ₹ 16,421 98,526.00 Warranty - 1 Year

Primary Material Subtype - Prelaminated Particle Board

Primary Material - Engineered wood"

Digitally signed by RAKESH

Providing, fixing and commissioning of make King Bed.

Overall Size:Width - 1875 mm Depth — 2046 mm Height — 90.1 mm

Material:3Bed Structure consist of metal frames made of M.S. Channels in 1.0mm Thickness. Horizontal plinths and bottom plinth are made of 25

mm Thick Prelaminated Particle Board 1S:12823 Class E1 (as per EN13986).Plinth support assembly is made of M.S. 25 mm square pipe in 1.2 mm

thickness. Head board is made of 18 mm thick PrelaminatedParticle board IS:12823 Class E1 (as per EN13986) with 2mm edge banding glued

20 Adria King Bed 6 ₹ 45,816 2,74,896.00 with Hot Melt EVA glue. Tail board is made of 18 mm thick Prelaminated Particle board IS:12823 Class E1 (as per EN13986) with 0.8mm edge

banding glued with Hot Melt EVA glue.Side rail is made of 18 mm thick Prelaminated Particle board 1S:12823 Class E1 (as per EN13986) with

0.8mm edge banding glued with Hot Melt EVA glue.Mattress panels of Bed are made of 18 mm thick Prelaminated Particle 1S:12823 Class E1 (as

per EN13986) with 0.8mm edge banding glued with Hot Melt EVA glue.

Hardware :The high quality hardware are used.Construction:Knock Down construction.Packets :2packet.Finish :.18 mm thick Prelaminated

Particle Board 1S:12823 Class E1 (as per EN13986) is in Imperial Oak shade.

Providing, fixing and commissioning of Mattress.

Net Weight (kg)- 43.8

Finish Color- White

Matt. Dimensions L x W x T (cm)- 198.1 x 182.9 x 12.7

Secondary Material - PU Foam

Country Of Origin- India

21 OrthoM Dlx Mat 78 72 5 15 ₹ 37,091 5,56,365.30 Primary Material- Bonded Foam

Mattress Size- King

Delivery Condition- Pre-assembled

Upholstery Material- Knitted Fabric

Designed after intensive research to keep all orthopaedic problems at bay. Perfect for sound sleep without stiffness or muscular discomfort.

Usable on both sides.High-density bonded foam provides body support and maintains its shape,

ensuring a comfortable sleep.10-year warranty ensures peaceful sleep for years.Available in thickness of 12.5cm.

CII GREENPRO approved by the committee

Providing, fixing and commissioning of Pillow.

Memory Foam: Adapts to your body temperature, providing an excellent

sleeping surface.

Excellent Neck Support: Designed to provide optimal neck support.

Durability: Highly durable with a one-year warranty.

22 Neckfine Ctr XL Pillow 15 24 1 30 ₹ 2,981 89,423.10

Variety: Available in 5 variants to suit different comfort preferences.

Dual Fabric Cover: Features both inner and outer fabric covers.

Cotton Outer Fabric: Suitable for all skin types and helps keep you cool while

Pin Holes: Pin holes in Slim and Regular variants allow air to flow freely within

the pillow, it prevent heat buildup and ensure a cooler, more comfortable sleep.

Providing, fixing and commissioning of Bedside Table

Overall Size :Depth — 461.0 mm Width — 460.0 mm Height — 510.0 mm

Material:Body panels of Bed side table are made of 18 mm thick Prelaminated Particle Board 1S:12823 Class E1 (as per EN13986) .All the exposed

edges are edge banded with 0.8 mm thick PVC edge banding glued with Hot Melt EVA glue.Drawer front are made of 18 mm thick Prelaminated

23 Adria Bedside Table 12 ₹ 10,113 1,21,356.00 Particle board 1S:12823 Class E1 (as per EN13986). Hardware:The high quality hardware used like Roller slides, Hinges , minifix, dowels is of

make Hettich.Construction:Knock Down construction.

Packets :1 packet.Finish :.18 mm thick PrelaminatedParticle Board 1S:12823 Class E1 (as per EN13986) is in Imperial Oak shade.Lipping shade is

299P MAKE REHAU

CII GREENPRO approved by the committee

Providing, fixing and commissioning of Edward Corner Table:

MATERIALS & SIZE :

Material: Plywood+ MDF + Solid wood legs

Color : Dark Wenge

Top Material: Plywood+ MDF

Frame Material: Plywood+ MDF

Leg Material: Solid wood ( Rubber wood)

24 EdwardCornerTable 6 ₹ 18,509 1,11,053.82 Shoe material: Polypropylene

Top Dimension: 600X600X18

Thickness of frame: 18

Thickness of understructure Legs: 68 (+/- 5)

Weight / unit (KG): 14 KG (+/- 4)

Providing, supplying and placing Upholstered Wooden Tub Chair of approved size approximately 700 mm (W) × 650 mm (D) × 800 mm (H),

manufactured from kiln-seasoned hardwood such as teak wood, steam beech wood, white ash or approved equivalent with moisture content not

exceeding 12%, comprising solid wooden legs (minimum 45 mm × 45 mm), curved tub-type backrest with integrated armrests, hardwood frame

construction using mortise and tenon joints, hardwood dowels and waterproof adhesive, complete with ergonomically designed seat and back

upholstered with premium quality commercial upholstery fabric of minimum 300 GSM and abrasion resistance of not less than 40,000

Martindale cycles, fixed over high-density polyurethane foam cushioning of minimum density 40±2 kg/m³ for seat and 32±2 kg/m³ for backrest,

25 Wooden Handvraft chair for room and study tabl 18 ₹ 23,000 4,14,000.00

supported on elastic webbing and 12 mm thick BWR grade plywood conforming to IS 303 wherever required, including all necessary hardware,

stainless steel/zinc-coated fasteners, PU or melamine polished exposed wooden surfaces in approved shade, machine-finished smooth edges,

superior workmanship, transportation, handling, installation and completion in all respects as directed by the Engineer-in-Charge. The chair shall

be capable of safely carrying a minimum load of 120 kg without structural deformation and shall be free from cracks, warping, sharp edges,

upholstery wrinkles or manufacturing defects, complete with a minimum 3-year warranty against structural failure, joint failure, foam sagging,

upholstery defects and finish deterioration under normal institutional usage.

Providing, fixing and commissioning of Work Desk.Ideal for those who prefer to work/study in the bedroom, and want to have the option of

sitting on the bed and working too. • Designed to offer flexibility, the swivelling laptop support arm allows you to dock your laptop on the arm

when the table is positioned next to a bed. • Overhead storage with sliding shutter allows you to place and display your collection of books,

making it a unique design.

26 Bay Work desk cum book rack 6 ₹ 30,825 1,84,950.00

Height : 164.6cm

Providing, fixing and commissioning of Dressing Table. Overall Size :Depth — 461.0 mm Width -460.0 mm Height— 1710.0 mm

Material:2 Panels of Dressing table are made of 18 mm thick Prelaminated Particle Board IS:12823 Class E1 (as per EN13986) .All the exposed

edges are edge banded with 0.8 mm thick PVC edge banding glued with Hot Melt EVA glue.Drawer front & Door are made of 18 mm thick

Prelaminated Particle board 1S:12823 Class E1 (as per EN13986). Mirror panel is made of 18 mm thick particle board 1S:12823 Class E1 (as per

EN13986) with 4 mm thick mirror fixed on to it.Supporting pipe used for fixing the mirror frame is made of MS square pipe of thickness 1.2

mm.Hardware:The high quality hardware used like Roller Slides, Hinges , minifix, dowels is of make Hettich..Construction:Knock Down

27 Adria Dressing table` 6 ₹ 19,653 1,17,918.00

construction.Packets :2 Packets.

Finish :.18 mm thick Prelaminated Particle Board 1S:12823 Class E1 (as per EN13986) is in Imperial Oak shade. Lipping shade is 299P MAKE

Metal pipe is powder coated in shade Metallic Silver Grey to thickness of 50

CII GREENPRO approved by the committee

Providing, fixing and commissioning of Wardrobe.OVERALL SIZE:

DEPTH-600.0 MM x WIDTH 900.0 MM x HEIGHT 2000.0 MM (WITHOUT LEVELLER)

MATERIAL -PANELS OF DRESSING TABLE ARE MADE OF 18 MM THICK PRELAMINATED PARTICLE BOARD. ALL THE EXPOSED EDGES ARE EDGE

BANDED WITH 2.0 MM THICK PVC EDGE BANDING.

DOORS ARE MADE OF 18 MM THICK PU PAINTED MDF PANELS WITH COLOUR OPTIONS

HARDWARE : THE HIGH QUALITY HARDWARE USED LIKE ROLLER SLIDES, HINGES, MINIFIX, DOWELS IS OF MAKE HETTICH..

CONSTRUCTION: KNOCK DOWN CONSTRUCTION.

28 Kalista 2 door wardrobe with menbrane finish door 6 ₹ 56,250 3,37,500.00 PACKETS: BODY 3 PACKETS

SHUTTER 1 PACKET

FINISH: 1. 18 MM THICK PRELAMINATED PARTICLE BOARD IS IN SONOMA OAK SHADE WITH LIPPING SHADE 399P AND DOOR IN THREE OPTIONS

A) GRAPHITE GREY (NCS S 7005-Y20R) MATTE B) SHELLWINE RED (NCS S 8010-R10B) GLOSS

C) ROYAL PURPLE (NCS S 6020-R40B) MATTE

2. 18 MM THICK PRELAMINATED PARTICLE BOARD IS IN CINNEMON SHADE WITH LIPPING SHADE 218P AND DOORS IN THREE OPTIONS

A) ECRU (NCS S 2005-Y20R) GLOSS

B) MISTY ROSE (NCS S 3010-R10B) GLOSS C) MISTERY GREY (NCS S 6005-Y80R) MATTE

Providing, fixing and commissioning of Sofa.Dimensions W x H x D (cm)- 127.5 x 83.5 x 80

Upholstery•Material : Syn Leather

•Shade: Crush Brown

•Thickness: 1 mm

Frame :•Material : Pine Wood

•Moisture content : 1012 %

•Thickness of Plywood used : 12 mm & 18 mmSeat Foam :

29 Rewind 2str sofa 6 ₹ 27,873 1,67,238.00 •Material : Slab stock

•Density : 32 kg/m3 at seat

•Material : Slab stock

•Density : 28 kg/m3 at seat

•Material : Nylon

Legs :•Material : PVC

Digitally signed by RAKESH

Providing, fixing and commissioning of King Bed. Overall Size:Width - 1875 mm Depth — 2046 mm Height — 90.1 mm

Material:3Bed Structure consist of metal frames made of M.S. Channels in 1.0mm Thickness. Horizontal plinths and bottom plinth are made of 25

mm Thick Prelaminated Particle Board 1S:12823 Class E1 (as per EN13986).Plinth support assembly is made of M.S. 25 mm square pipe in 1.2 mm

thickness. Head board is made of 18 mm thick PrelaminatedParticle board IS:12823 Class E1 (as per EN13986) with 2mm edge banding glued

with Hot Melt EVA glue. Tail board is made of 18 mm thick Prelaminated Particle board IS:12823 Class E1 (as per EN13986) with 0.8mm edge

banding glued with Hot Melt EVA glue.Side rail is made of 18 mm thick Prelaminated Particle board 1S:12823 Class E1 (as per EN13986) with

0.8mm edge banding glued with Hot Melt EVA glue.Mattress panels of Bed are made of 18 mm thick Prelaminated Particle 1S:12823 Class E1 (as

per EN13986) with 0.8mm edge banding glued with Hot Melt EVA glue.

Hardware :The high quality hardware are used.Construction:Knock Down construction.Packets :2packet.Finish :.18 mm thick Prelaminated

Particle Board 1S:12823 Class E1 (as per EN13986) is in Imperial Oak shade.

Lipping shade is 299P MAKE REHAU

CII GREENPRO approved by the committee

31 Twin Sharing rooms

Providing, fixing and commissioning of Single Bed.Overall Size: Width- 970 mm Depth— 2046 mm Height -901 mm

Material:Bed Structure conssst of metal frames made of M S. Channels in Imm Thickness.Horizontal plinths and bottom plinth are made of 25

mm Thick Prelaminated Particle Board 1S:12823 Class E1 (as per EN13986).

Head board is made of 18 mm thick Prelaminated Particle board 1S:12823 Class E1 (as per EN13986) with all the exposed edges are edge banded

with 0.8 mm thick PVC edge banding glued with Hot Melt EVA glue.Tailboard is made of 18 mm thick Prelaminated Particle board 1S:12823 Class

(as per EN13986).Side rail is made of 18 mm thick Prelaminated Particle board 1S:12823 Class E1 (as per EN13986).Mattress panels of Bed are

made of 18 mm thick Prelaminated Particle Board IS: 12823 Class E1 (as per EN13986) with all the exposed edges are edge bandedwith 0.8 mm

thick PVC edge banding glued with Hot Melt EVA glue.Hardware:The high quality hardware are used.Construction: Knock Down construction.

Packets :2 packet.Finish :.18 mm thick Prelaminated Particle Board 1S:12823 Class E1 (as per EN13986)is in Imperial Oak shade. Lipping shade is

299P MAKE REHAU

CII GREENPRO approved by the committee

Providing, fixing and commissioning of Mattress.Matt. Dimensions L x W x T (cm)- 198.1 x 182.9 x 12.7

Net Weight (kg) -43.8.

Secondary Material -PU Foam

Upholstery Material -Knitted Fabric

33 OrthoM Dlx Mat 78 36 5 42 ₹ 18,533 7,78,399.86 Layers- Single

Secondary Material - PU Foam

Country Of Origin- India

Primary Material- Bonded Foam

Mattress Size- King

Providing, fixing and commissioning of Pillow . Packsize – 25 per pack

Weight per pillow – 670 grams

Comes in semi-vaccumized packing

Size - 43X69cm/17”X27

100% soft polyester fabric keeps the pillow durable, light weight & wrinkle resistant Peached polyester fabric for

soft & comfortable feel.670 grams eco-friendly PET fiber ensures even support and comfort.Self piping for a smooth & uncomplicated look

Providing, fixing and commissionim Mid Back . SEAT ASSEMBLY: The seat assembly should be made up of 1.2 ±0.1cm. thick hot-pressed

plywood , upholstered with fabric upholstery covers and moulded Polyurethane foam.

SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D).

BACK ASSEMBLY: The back asembly. should be made of powder coated (OFT 40-60 microns) tubular frame of 0 2.54 ±0.03cm. x 0.2

±0.016cm.thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back should be upholstered using double layer

spacer mesh fabric with high tenacity yarn.

BACK SIZE : 46.5 cm (W) x 60.5 cm (H).

HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density =45+/-2 kg/m3 and hardness load 16

± 2 kgf for 25% compression.

ARMRESTS: The one-piece armrests should be injection moulded from black Co-polymer Polypropylene.

CENTRE-TILT mechanism: The mechashould be m should be designed with the following features:

• 360° revolving type.

35 OXBO Mid Back Revolving Chair 50 ₹ 12,391 6,19,550.00 • 17° ±2° maximum tilt on pivot at centre

• Upright position locking.

• Tilt tension adjustment. .

PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm.

TELESCOPIC BELLOW ASSY: The bellow should be 3 piece telescopic type and injection moulded in Black Polypropylene.

PEDESTAL ASSEMBLY: The pedestal should be injection moulded in black 33% glass-filled Nylon66 and fitted with 5 nos. twin wheel castors. The

pedestal should be 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors.)

TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in black nylon.

Overall Dimensions of Chair

Seat Height - min 43.3 to max 54.3cm.

Height - min 89.5 to max 100.5cm.

Width & Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm.

CII GREENPRO approved by the committee

Providing, fixing and commissioning of Wardrobe

Main Body comes with two widths (450W & 600W) and 560D depth.

Main body 450W/600W with 560D:

1. Main Body 450W : 450 x 1980 x 560

2. Main Body 600W : 600 x 1980 x 560

a. The Side panel, Top panel and End cover is made using 0.5 mm CRCA (IS:513).

b. Back panel is made using 0.5mm CRCA (IS:513).

c. The top and bottom stiffener is made using 1.2mm CRCA (IS:513).

d. Bottom panel in (450W / 600W) is made using 0.5 mm CRCA (IS:513).

e. End Legs are made up of 1.2mm CRCA with leg bush welding on it. Tube and insert moulded leveler assembly is inserted on leg bush.In 560D

unit, the leg used is 80mm in height.

36 Kreation X3 Single Door Almirah with Locker 40 ₹ 37,271 14,90,840.00 Shelves -

a. Shelves used are 10 bend panel made of 0.5mm CRCA (IS:513).

b. Shelf panels are placed on shelf support and then fixed using nut and bolts from below.

c. Standard config. consists of 3 shelves for main body 560D .

d. Additional Shelves (accessory) can be bought seperately if required

Hanging Rod- (only in 560D) -

a. Hanging rail comprises of 2 injection moulded holders mounted on the shelf and a hanging rod.

b. Hanging rod is made of Aluminium and is silver anodized.

c. Hanging rod is having 392 mm width for 450W body and 542 mm width for 600W Body.

Construction - Completely Knock down construction

Finish- All MS sheetmetal and metal frame components are powder coated with epoxy polyester powder to the minimum thickness of 45

Body Offering - While buying, atleast 1 ADDON body (of 900/1200W) is required with MAIN body

Providing and supplying freestanding wooden luggage rack manufactured from seasoned hardwood/steam beech wood/rubber wood, suitable

for hostel rooms, guest rooms, and residential accommodation. The luggage rack shall consist of a sturdy rectangular frame with slatted top

platform for luggage placement and an additional lower shelf for shoes, bags, or storage.Overall Dimensions

Length: 900 mm ± 25 mm

Width: 450 mm ± 25 mm

Height: 600 mm ± 25 mm

(Actual dimensions may be approved by Engineer-in-Charge as per room layouts.)

Material Specifications

Made from kiln-seasoned solid hardwood such as:

Rubber Wood / White Ash / Steam Beech Wood / Teakwood equivalent approved.

Moisture content shall not exceed 12%.

Timber shall be free from:

Sapwood defects

Solid wooden legs minimum section:

Legs shall be machine finished with rounded edges.

Solid hardwood members:

Minimum section 25 mm × 75 mm.

Slats (Top Platform)

Hardwood slats:

Minimum size 20 mm × 40 mm.

Providing, fixing and commissioning of Study Table. Overall Size :

Width - 1200 mm

Height - 718 mmMaterial - All panels are made of 18 mm thick Prelaminated Particle Board. All the exposed edges are edge banded with 0.8 mm

thick PVC edge banding.

38 Adria Study Table 49 ₹ 12,654 6,20,038.65

Hardware- The high quality hardware used like KDfittings, wooden dowels is of Make Ebco and Hettich

Construction: Knock Down construction.

Packets: :1 packet.

Finish-18 mm thick Prelaminated Particle Board is in IMPERIAL OAK Shade.

CII GREENPRO approved by the committee

Digitally signed by RAKESH

Providing, fixing and commissioning of storage unit.

Overall size shall be 900mm(W)x450mm(D)x1830mm(H) . The construction shall be rigid knock down construction and Material used shall be

prime quality CRCA steel - panels from 0.6 mm thick & front frame . Shelf shall be 0.8 mm thick .Configuration (Door) shall be full height steel

39 Storewel Plain with 4 Shelves 6 ₹ 33,670 2,02,020.00 hinged door . Locking shall be Plastic Recessed Handle cum Cam lock with 3 way locking mechanism with shooting bolt arrangement . Height wise

adjustable shelf mounting , Uniformly distributed load capacity per each full shelf shall be 80 Kg maximum . For Plain 4 Nos. of adjustable full

shelves . The top shall be metal and Epoxy Powder coated finish to the thickness of 50 microns .

GREENGUARD GOLD approved by the committee.

Providing, Fixing and Commissioning of APO Slotted Angle Rack

Supply and installation of slotted angle rack

Slotted angle- Slotted angle is made up 2mm thick CRCA sheet confirming the IS grade IS 513:2008 coated with final finish consisting of epoxy

polyester powder coat of approved color & shade with a Dry Film Thickness of minimum 50 to 60 microns. Angle length is equivalent to the

height of the storage which is approx.1830mm

Shelf-Is made up of 0.8mm CRCA sheet confirming the IS grade IS 513:2008. All the four edge is having a bend of 25mm. Shelf is supported by T-

40 MF Rack 6Ft Height with 4 Shelves 36x18 10 ₹ 12,000 1,20,000.00 Hat in the middle portion. T-hat is made up of 0.8mm CRCA sheet confirming the IS Grade IS 513:2008.Each shelf is having loading carrying

capacity of 18kg UDL and total load carrying capacity of unit is 50kg UDL.

Finish- The bodies including shelves are given anti-rust surface treatment & are powder coated with epoxy polyester powder. It involves an

Oxsilan pre-treatment consisting of Hot water degreasing, cold water rinse I & cold water rinse II, iron phosphate, cold water rinse, and

passivation & dry off oven treatment. Final finish consists of epoxy polyester powder coating of approved color & shade with a Dry Film Thickness

of 50 to 60 (+\- 5) microns. The material is then oven baked with a controlled temperature of 180 deg.C to 200 deg.C.

Fasteners:- Assembly is done with the help of M8 NUT nuts & HEX BOLT M8 X 16.

Digitally signed by RAKESH

BILL OF QUANTITIES of Soft furniture of VIP Guest House & Hostel Building

SR NO ARTICLE measu QTY NO REF IMAGE BASIC PRICE TOTAL PRICE DETAILED SPECIFICATIONS

Providing, supplying and fixing premium quality modular sign boards for VIP Hostel, Reception Areas, Corridors, Common Areas and Service Locations, fabricated from

minimum 3 mm thick ACP (Aluminium Composite Panel) or 2 mm thick anodized aluminium plate with high-quality reflective/non-reflective vinyl graphics, UV-stabilized

digitally printed lettering, symbols and pictograms, complete with laser-cut acrylic lettering where specified, mounted using SS 304 grade concealed fasteners, stand-offs or

approved fixing arrangements. The signage shall have rounded corners, smooth finished edges and anti-fade, anti-scratch surface coating suitable for indoor institutional

1 Sign boards sq mtr 100 ₹ 4,000 ₹ 4,00,000 use. Typography, symbols, colours and graphics shall conform to universal wayfinding standards and approved architectural signage scheme. Background and text colours

shall provide high contrast for visibility and accessibility. Sign boards shall include room identification signs, reception signs, directional signs, floor information signs,

emergency information signs and common facility markers as required. All signage shall be moisture-resistant, corrosion-resistant, easy to clean and suitable for long-term

use. Installation shall include all fixing accessories, templates, alignment, making good damages to surfaces and completion in all respects as directed by the Engineer-in-

Providing, supplying and installing premium decorative wall artwork/paintings for VIP Hostel Living Rooms, Lounges, Reception Areas and Waiting Spaces, comprising high-

definition digitally printed artwork, curated artistic themes, cultural motifs, abstract artwork, heritage-inspired designs, contemporary compositions or approved

architectural artwork, mounted in premium quality frames and installed complete as per approved interior design scheme. The artwork shall be of hospitality-grade quality

suitable for premium guest accommodation and VIP residential facilities. The design theme shall complement the overall interior décor and shall be approved by the

Architect/Engineer-in-Charge before execution.The artwork shall consist of high-resolution archival-quality digital printing on premium canvas, synthetic canvas, textured

art paper, UV-printed acrylic panel, tempered glass artwork or equivalent approved material. Canvas shall be stretched over kiln-seasoned wooden stretcher frames and

enclosed within decorative powder-coated aluminium, natural wood, veneer-finished or PU-finished frames as specified. Printed surfaces shall be protected with anti-fade,

anti-glare and scratch-resistant coating to ensure long-term durability. All materials shall be moisture-resistant, warp-resistant and suitable for indoor institutional use.

Material Specifications

Artwork Material: Premium canvas / UV printed acrylic / tempered glass artwork / textured art print.

Canvas GSM: Minimum 350 GSM.

Acrylic Thickness: Minimum 5 mm.

Toughened Glass Thickness: Minimum 6 mm where specified.

Frame Material: Solid hardwood, engineered wood with veneer finish, aluminium frame or PU-finished frame.

Frame Width: 25 mm to 50 mm.

2 Wall Paintings/Wall designs for living room pcs 6 ₹ 13,000 ₹ 78,000

Backing Board: Moisture-resistant MDF/HDF board minimum 6 mm thick.

Protective Layer: UV-resistant coating with anti-fading treatment.

Size Requirements

Typical Living Room Artwork Size:

Or as approved by Architect.

Multi-panel artwork permitted where indicated in drawings.

Complete with concealed hanging hardware.

Providing, supplying and fixing premium quality framed decorative wall paintings/artwork for VIP Hostel Bedrooms, Guest Rooms and Suites, comprising high-definition

archival-quality artwork depicting approved themes such as contemporary art, cultural motifs, traditional Indian art, abstract compositions, nature-inspired designs,

heritage artwork or equivalent approved designs, printed on premium artist canvas, textured art media, UV-printed acrylic panels or equivalent approved substrate and

mounted in aesthetically finished frames. The artwork shall be hospitality-grade and specifically selected to enhance the interior ambiance of VIP accommodation

spaces.The artwork shall consist of high-resolution fade-resistant digital printing using archival inks on minimum 350 GSM premium canvas stretched over kiln-seasoned

3 Wall paintings for bedroom pcs 15 ₹ 8,000 ₹ 1,20,000 wooden stretcher frames or UV-printed acrylic panel of minimum 5 mm thickness, complete with decorative hardwood, engineered wood veneer, PU-finished, metal or

powder-coated aluminium framing. All visible surfaces shall be smooth, free from defects and protected with anti-glare, anti-scratch and UV-resistant coating to ensure

long service life. Multi-panel artworks (diptych/triptych arrangements) as shown in approved interior designs shall be supplied as complete sets with uniform spacing and

alignment fixtures.

Material Specifications

Artwork Medium: Premium canvas print / UV printed acrylic / textured art panel.

Providing, supplying and fixing premium quality curtain system for VIP Hostel rooms, suites, lounges and living areas, comprising decorative blackout curtains and sheer

curtains, manufactured from hospitality-grade fire-retardant fabric, complete with heavy-duty powder-coated aluminium curtain tracks or SS 304 curtain rods, carriers,

runners, brackets, tie-backs and all accessories. The curtain system shall be designed to provide privacy, room darkening, acoustic comfort, thermal insulation and aesthetic

enhancement suitable for premium guest accommodation and VIP residential facilities.

The decorative curtain fabric shall be made from high-quality polyester blend, linen-look polyester, jacquard, velvet finish or approved hospitality-grade fabric of minimum

300 GSM, wrinkle-resistant, anti-fungal, anti-static and colour-fast. The blackout lining shall provide minimum 85-95% light blockage and shall be stitched integrally or as a

separate lining. The sheer curtain shall be made from high-quality translucent polyester voile fabric of minimum 100 GSM, providing adequate daylight transmission while

ensuring privacy.

All curtains shall be factory-tailored with uniform stitching, double-fold hems, reinforced heading tape and wave-fold, pinch-pleat or eyelet configuration as approved.

Fabric colour, texture and pattern shall be selected from approved samples to suit the interior design scheme.

Material Specifications

Main Curtain Fabric: Premium hospitality-grade polyester/linen blend/jacquard.

Fabric GSM: Minimum 300 GSM.

Blackout Efficiency: Minimum 85% (preferred 90-95%).

Curtains including fixtures (CONSIDERED

4 sq mtr 250 ₹ 1,800 ₹ 4,50,000 Sheer Fabric: Polyester voile, minimum 100 GSM.

FOR VIP LIVING AND BEDROOM ROOMS)

Fabric Width: Seamless appearance with minimum joints.

Fire Retardancy: Flame-retardant treatment suitable for hospitality applications.

Colour Fastness: Minimum Grade 4.

Shrinkage: Not exceeding 2% after washing.

UV Resistance: Suitable for prolonged indoor daylight exposure.

Curtain Hardware

Curtain Track: Heavy-duty powder-coated aluminium track, minimum 1.5 mm thick.

Alternatively: SS 304 decorative curtain rod, minimum 25 mm dia.

Brackets: Powder-coated steel/SS 304.

Runners & Gliders: Heavy-duty nylon rollers.

End Caps: Matching decorative finish.

Tie Backs: Fabric-covered magnetic or decorative type.

Stitching & Fabrication

Double-fold side hems.

Providing, supplying and fixing premium quality roller blinds for VIP Hostel bedrooms, suites, study rooms, lounges and common areas, manufactured from high-

performance sunscreen, blackout or dim-out fabric as specified, mounted on heavy-duty aluminium roller tubes with precision clutch operating mechanism, complete with

powder-coated brackets, chains, bottom rails, side guides wherever required, and all accessories. The blinds shall provide effective solar control, glare reduction, privacy

and aesthetic enhancement suitable for premium hospitality and VIP accommodation facilities.

The blind fabric shall be made from premium quality polyester, polyester-PVC coated, fiberglass-reinforced sunscreen fabric or equivalent approved material, resistant to

fading, moisture, fungal growth and dimensional distortion. For bedrooms and suites, blackout fabric providing minimum 95-100% light blockage shall be used, while

sunscreen fabrics with openness factor of 3% to 5% may be provided in living areas and lounges as approved by the Engineer-in-Charge. Fabric shall be colour fast, dust

resistant and easy to clean.

Material Specifications

Blackout Fabric for bedrooms and suites.

Sunscreen Fabric for lounges and living areas.

Fabric Composition:

5 Roller blinds (ALL COMMON AREAS) sq mtr 100 ₹ 3,000 ₹ 3,00,000

Polyester coated fabric / Fiberglass reinforced fabric.

Minimum 350 GSM for blackout blinds.

Minimum 280 GSM for sunscreen blinds.

Openness Factor:

3% to 5% for sunscreen blinds.

Minimum 90% UV blockage.

Fire Performance:

Flame-retardant fabric suitable for hospitality applications.

Colour Fastness:

Minimum Grade 4.

Moisture and mildew resistant.

Roller Mechanism

Providing, supplying and placing premium decorative floor lamp for VIP Hostel living rooms, lounges, reception waiting areas and suite seating spaces, comprising designer

floor-standing lamp with solid wood, engineered wood veneer, powder-coated metal or a combination thereof, complete with decorative fabric lampshade, integrated LED

light source/light fitting, electrical wiring, plug top, switch and all accessories. The lamp shall be of hospitality-grade quality designed to provide ambient lighting, accent

lighting and aesthetic enhancement suitable for premium institutional and VIP accommodation facilities.

The lamp body shall be manufactured from kiln-seasoned hardwood such as teak, ash wood, steam beech or approved equivalent with PU polished finish, or powder-coated

MS/aluminium framework with premium finish. The lampshade shall be made from linen, polyester blend fabric or equivalent premium material fixed over metal frame

construction and designed to provide uniform glare-free illumination. The complete assembly shall be stable, free-standing and resistant to tipping during normal use.

Material Specifications

Lamp Structure:

Solid hardwood / engineered wood veneer / decorative metal construction.

Minimum member thickness: 20 mm.

6 Lamps for drawing room pcs 6 ₹ 15,000 ₹ 90,000

Moisture content of timber not exceeding 12%.

Premium linen, textured fabric or polyester blend shade.

Fire-retardant treated fabric.

Washable and replaceable design.

Surface Finish:

Premium PU polish on wooden surfaces.

Powder-coated or electroplated finish on metal components.

Scratch-resistant and stain-resistant finish.

Electrical Specifications

Digitally signed by RAKESH

Providing, supplying, testing and placing premium decorative floor-standing lamp of approved design for VIP Hostel suites, living rooms, lounges and reception seating

areas, comprising a minimalist contemporary floor lamp with circular weighted base, slender metal stem and premium fabric lampshade as shown in approved design,

complete with LED light source, electrical accessories and all fittings. The fixture shall be designed to provide warm ambient lighting and aesthetic enhancement suitable for

premium hospitality and VIP residential accommodation.

The lamp body shall be fabricated from heavy-gauge MS tube/aluminium tube of minimum 1.6 mm thickness with powder-coated, brushed metallic, satin black, bronze,

brass or approved finish. The base shall consist of a solid weighted metal plate of adequate diameter and weight to ensure stability and prevent accidental tipping during

normal use. The lampshade shall be fabricated using hospitality-grade linen, textured polyester fabric or equivalent premium material stretched over a powder-coated

metal frame and treated for dimensional stability and flame resistance.

Material Specifications

Heavy-duty MS/aluminium tubular section.

7 Lamps for sharing room pcs 20 ₹ 7,000 ₹ 1,40,000

Minimum thickness: 1.6 mm.

Seamless smooth finish.

Weighted metal base.

Minimum diameter: 250 mm.

Anti-skid rubber pads at bottom.

Premium linen or textured fabric.

Fire-retardant hospitality-grade material.

Powder-coated internal metal frame.

Providing, supplying and placing premium decorative bedside table lamp for VIP Hostel rooms, suites and guest accommodation areas, comprising a modern hospitality-

grade table lamp with decorative ceramic/stone-finish base, premium fabric lampshade, LED light source, electrical wiring, plug top, switch and all accessories complete.

The lamp shall be designed to provide warm ambient bedside illumination while complementing the interior décor of VIP accommodation facilities.

The lamp base shall be fabricated from high-density ceramic, cast stone composite, engineered decorative resin, glass ceramic or equivalent premium material with

textured matte finish as approved by the Engineer-in-Charge. The lampshade shall be made of premium linen, cotton-linen blend or polyester fabric stretched over a

powder-coated metal frame to provide soft and glare-free illumination. All visible components shall be free from defects, cracks, chips, sharp edges and surface

Material Specifications

Premium ceramic / stone-finish composite / decorative resin.

Minimum wall thickness: 6 mm.

8 Table lamps for bedroom VIP suite pcs 12 ₹ 4,400 ₹ 52,800

Weighted construction for stability.

Linen or textured fabric shade.

Fire-retardant hospitality-grade fabric.

Powder-coated MS frame.

Surface Finish:

Matte textured finish.

Scratch-resistant protective coating.

Stain-resistant and easy-clean surface.

Electrical Specifications

Providing, supplying, testing and placing premium LED study table lamp of approved design for study desks, workstations and writing tables in VIP Hostel rooms and suites,

comprising a modern ergonomic lamp with flexible gooseneck arm, high-efficiency LED light source, touch-sensitive/on-off control, glare-free diffuser, stable weighted base

and complete electrical accessories. The lamp shall be designed to provide uniform task lighting suitable for reading, writing, computer work and study activities while

maintaining visual comfort and energy efficiency.

9 Study table lamp pcs 6 ₹ 3,500 ₹ 21,000

The lamp housing shall be manufactured from high-quality ABS engineering plastic, die-cast aluminium or a combination thereof, with a smooth matte finish resistant to

scratches, discoloration and wear. The flexible neck shall allow multi-directional adjustment for optimum light positioning without loss of stability. The fixture shall

incorporate an opal polycarbonate diffuser to ensure soft, flicker-free and glare-free illumination.

Providing, supplying and fixing premium quality designer analogue wall clock for VIP Hostel rooms, suites, lounges, reception areas and common spaces, comprising a

contemporary minimalist design with precision quartz movement, powder-coated metal/aluminium frame, premium glass front cover, high-contrast dial face and silent

sweep mechanism, complete with mounting hardware and accessories. The wall clock shall be hospitality-grade, aesthetically suitable for premium accommodation

facilities and designed for continuous operation with accurate timekeeping.

The clock housing shall be manufactured from high-quality powder-coated aluminium alloy, stainless steel or engineered polymer with premium finish and corrosion-

resistant construction. The dial shall feature a clean, easy-to-read design with high-definition printed numerals/indices and metal hands protected by clear toughened glass

or acrylic cover. The movement shall be quartz-operated with silent sweep technology to eliminate audible ticking, ensuring suitability for bedrooms and guest rooms.

Performance Requirements

Silent operation suitable for bedrooms and suites.

Accurate timekeeping.

Easy readability from minimum 5 m distance.

Resistant to fading and discoloration.

Minimal maintenance requirements.

Premium hospitality-grade appearance.

Providing, supplying and laying premium quality hospitality-grade area carpets/rugs for VIP Hostel living rooms, lounges, reception seating areas and suite living spaces, of

approved design, pattern, colour and size, having contemporary geometric woven pattern as approved, manufactured from high-quality solution-dyed nylon, premium

polypropylene, wool-blend, polyester blend or equivalent hospitality-grade yarn, complete with anti-skid backing, edge binding, transportation and placement in position.

The carpet shall be suitable for heavy residential and light commercial use, offering superior aesthetics, comfort, durability and acoustic performance.

The carpet shall be machine tufted, hand-tufted or power-loom woven construction with dense pile and uniform texture. The pile yarn shall be stain-resistant, anti-static,

fade-resistant and easy to maintain. Colours, patterns and texture shall be selected and approved by the Architect/Engineer-in-Charge to suit the interior décor scheme of

VIP accommodation facilities.

Material Specifications

Premium Area Rug / Hospitality Carpet.

100% Solution Dyed Nylon (Preferred)

Wool-Nylon Blend

11 Capets for drawing room pcs 6 ₹ 13,400 ₹ 80,400

Heat-set Polypropylene

Premium Polyester Blend.

Hand Tufted / Machine Tufted / Woven.

Total Thickness:

Minimum 1500 GSM.

Total Carpet Weight:

Minimum 2500 GSM.

Backing Material

Action Back / Latex Back / Cotton Canvas Backing.

Anti-skid treatment on underside.

Providing, supplying and placing premium quality bedside runner rug/bed runner carpet for VIP Hostel rooms, suites and guest accommodation areas, of approved design,

colour and dimensions, manufactured from high-quality hospitality-grade nylon, polyester, polypropylene, wool-blend or equivalent premium yarn, having soft-touch dense

pile construction with decorative woven border pattern as approved by the Engineer-in-Charge. The runner shall be placed alongside beds to enhance comfort, aesthetics

and acoustic performance and shall be suitable for premium hospitality and residential applications.

The runner shall be machine-tufted, woven or hand-tufted construction with uniform pile density, anti-static finish, stain-resistant treatment and anti-skid backing. The pile

yarn shall be colour-fast, non-shedding and capable of withstanding regular housekeeping operations. The underside shall be provided with latex-backed or anti-slip

treatment to prevent movement during use and ensure safety for occupants.

Material Specifications

Type: Premium Bedside Runner Rug.

Solution-Dyed Nylon (Preferred)

Wool-Nylon Blend

12 Carpets for bedroom pcs 6 ₹ 5,800 ₹ 34,800 Heat-Set Polypropylene

Premium Polyester Blend

Construction: Hand Tufted / Machine Tufted / Woven.

Pile Height: 8 mm to 12 mm.

Pile Weight: Minimum 1200 GSM.

Total Weight: Minimum 2200 GSM.

Backing: Latex-backed anti-skid backing or equivalent non-slip treatment.

Width: 600 mm to 900 mm.

Length: 1500 mm to 2400 mm.

Size as per furniture layout and approved interior design drawings.

Performance Requirements

Soft cushioning underfoot.

Anti-skid and slip-resistant performance.

Resistance to staining and fading.

Digitally signed by RAKESH

Providing, supplying and placing premium quality stainless steel pedal-operated dust bin with soft-closing lid for VIP Hostel rooms, suites, lounges, study rooms and

common areas, of approved capacity and design, fabricated from high-grade Stainless Steel 304 with satin/matte finish, complete with removable inner liner, anti-skid base

ring, corrosion-resistant pedal mechanism, hinged lid and all accessories. The dust bin shall be designed for hygienic hands-free operation and shall be suitable for premium

hospitality and institutional applications.

The outer body shall be manufactured from SS 304 grade stainless steel of minimum 0.5 mm thickness, seamless construction, dent-resistant and corrosion-resistant, with

brushed satin finish. The lid shall be fitted with a soft-close mechanism to ensure silent operation and prevent impact damage. The dust bin shall be provided with a heavy-

duty foot pedal made from stainless steel and engineered polymer components capable of withstanding repeated operation without failure.

The bin shall contain a removable inner bucket manufactured from high-density polypropylene (HDPP) or ABS polymer with integrated handle for easy waste disposal and

cleaning. The base shall be fitted with a non-marking anti-skid rubber ring to prevent floor damage and unwanted movement.

Material Specifications

Outer Body: SS 304 stainless steel.

Steel Thickness: Minimum 0.5 mm.

13 SS dust bin with lead pcs 35 ₹ 2,300 ₹ 80,500

Finish: Satin brushed / fingerprint-resistant finish.

Inner Bucket: Virgin polypropylene (PP) removable liner.

Pedal Mechanism: Heavy-duty corrosion-resistant mechanism.

Hinge Mechanism: Soft-close damped closure system.

Base Ring: Non-marking anti-skid rubber protection ring.

Guest Room Dust Bin: 12 to 20 Litres.

VIP Suite / Living Room Dust Bin: 20 to 30 Litres.

Capacity as specified in BOQ.

Performance Requirements

Hands-free pedal operation.

Silent soft-closing lid.

Corrosion and stain resistance.

Easy cleaning and maintenance.

Odour containment through tight-fitting lid.

Digitally signed by RAKESH