PROVN OF AREA DRAINAGE ALONGWITH PERIMETER WALL AT VARIOUS LOCATIONS AT AF STATION VADODARA

Amount

BUILDING WORK B/R

Excavating by mechanical means (Hydraulic excavator) over areas in any type of soil (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, complete all as specified and as directed.

All as per item No 01 above but depth exceeding 1.5 m but not exceeding 3.0 m complete all as specified and as directed.

Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Returning filling in including spreading levelling, watering & well ramming in layers not exceeding 25 cm in soil.complete all as specified and as directed.

Material & labour for hard core (broken stone or boulders) of gauge n.exc 63mm deposited,spread and levelled in layers n.exc 15 cm thick , watered and rammed to a true surface complete all as specified and as directed.

Material & labour for cement concrete (1:4:8) type D2 (using 40mm graded stone aggregates) as in foundation, filling and mass concrete etc all as specified and as directed.

Material and labour for precast cement concrete block masonary (1:3:6) type C1 (using 20mm graded stone aggregates) with solid blocks, exceeding 10 cm in width and setting in CM 1:6 complete all as specified and as directed.

Material & labour for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surface finished even and smooth without using extra cement complete all as specified and as directed.

Material & labour for PCC (1:2:4) type B1 (using 20mm graded stone aggregates) as in coping, including use of form work complete all as specified and as directed.

Material and labour for extra for forming fair finished drain or channel 0.90m inner girth in cement concrete, using extra cement including for MS moulds, mitered/stopped ends etc complete all as specified and as directed.

Material and labour for extra for forming fair finished drain or channel 1.20m inner girth in cement concrete, using extra cement including for MS moulds, mitered/stopped ends etc complete all as specified and as directed.

Material and labour for extra for forming fair finished drain or channel 2.0m inner girth in cement concrete, using extra cement including for MS moulds, mitered/stopped ends etc complete all as specified and as directed.

Material & labour for precast reinforcement cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in landing, cover slabs including necessary form work etc for manhole covers and set in CM (1:6) etc(reinforcement will be measured and paid separately) complete all as specified and as directed.

Material & labour for TMT bars 10mm dia and over, cut to length, bent to shape required, including crancking, bending spiraly for column & hooping ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.

Material & labour for 600mm dia reinforced concrete pipes, class NP2, laid and jointed complete with collars etc complete all as specified and as directed.

Material and labour for cement concrete type C2, (1:3:6) (using 40mm graded stone aggregate) bed to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested for 600mm bore pipe complete all as specified and as directed.

Supply & fix rolled mild steel, F-290 (Gde E-165) in Joist, channel, fencing post, angle, flats or tee sections, fixed independently, (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and as directred.

Material & labour for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directred.

Material & labour for 16 to 20 mm dia high tension steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 10cm long complete all as specified and as directred.

Supply only MS chain link mesh of size 50mmx50mmx3mm and weight not less than 3 kg/sqm galvanised fencing of any size or type as per standard trade as approved by Engr/in-Charge complete all as specified and as directred. .

Fixing only chain link MS fencing including line wires any mesh, size and type of any type standard, rails, standard bolt etc including provision of binding wire complete all as specified and as directed.

Material & labour for preparation of new steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

M K ENGINEERS CO.

City Light

SLB Enterprises

Indobuildenterprise

M/s. Shiva Engineers

Hi Tech Transpower Pvt Ltd