GE AF/AMB-68/2019-20 SPECIAL REPAIR TO CERTAIN B/R WORKS AT SITE-II RAJPURA AT AFS AMBALA UNDER GE AF AMBALA

Amount

Excavating in post holes (or similar holes) each not exceeding 0.5cum, returning, filling in, getting out in soft / loose soil and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm and removing surplus soil to a distance not exceeding 50m complete all as specified and as directed

Taking down chowkats or frames not exceeding 1.5sqm each with shutters (without taking off shutters from the frame) and disposing off

Taking down chowkats or frames exceeding 1.5sqm but not exceeding 4sqm each with shutters (without taking off shutters from the frame) and disposing off

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and disposing off complete all as specified and as directed

Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles and disposing off complete all as specified and as directed

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and disposing off complete all as specified and as directed

Dismantling stone slabs / tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar and disposing off complete all as specified and as directed

Demolition of mud in roofs, any thickness, including plastering and leaping (whether full thickness removed or only a part thereof) complete all as specified and as directed

Dismantling brick tiles or terracing tiles, single layer on roofs, sorting and stacking serviceable tiles and disposing off unserviceable tiles complete all as specified and as directed

M&L for dismantling rusted / damaged fencing wire of any size / type and disposing off complete all as specified and as directed

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and as directed

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground complete all as specified and as directed

Taking down cement or cement lime plaster, any description on brick / concrete / stone walls, etc. including raking out joints, hacking for keys, scubbing down with water, etc. including all necessary scaffolding as required and rubbishing off the premises, etc. complete all as specified and as directed

Taking up or down 15mm bore steel water tubing and connections including cleaning and setting aside for refixing or disposing off, etc. complete all as specified and as directed

Taking up or down 20mm bore steel water tubing and connections including cleaning and setting aside for refixing or disposing off, etc. complete all as specified and as directed

M&L for 75mm thick plain cement concrete 1:3:6 (type C-2) using 40mm graded stone aggregate as in floors, plinth protection, etc. including making spike rolling to surfaces or making impressions of expanded metal whilst the concrete is green laid in alternate bays of 3m length and joints between bays filled with 85/25 grade bitumen and sand mix @ 1:2 complete all as specified and as directed

M&L for 25mm thick plain cement concrete 1:2:4 (type B-1) using 20mm graded stone aggregate as in sub-bases, floors, etc. complete all as specified and as directed

M&L for 40mm thick plain cement concrete 1:2:4 (type B-1) using 20mm graded stone aggregate as in sub-bases, floors, etc. complete all as specified and as directed

M&L for 75mm thick plain cement concrete 1:2:4 (type B-1) using 20mm graded stone aggregate as in sub-bases, floors, etc. complete all as specified and as directed

M&L for plain cement concrete type B-0,1:2:4 (using 12.5mm graded stone aggregates) as in padding and making good depressions, copings, etc. on roof and the like complete all as specified and as directed

M&L for 75mm thick plain cement concrete 1:4:8 (type D-2) using 40mm graded stone aggregate as in pavings, paths, etc. finished even and smooth using extra cement complete all as specified and as directed

M&L for plain cement concrete 1:4:8 (type D-2) using 40mm graded stone aggregate as in foundation and mass concrete complete all as specified and as directed

M&L for plain cement concrete 1:2:4 (type B-1) using 20mm graded stone aggregate as in bedding for interlocking tiles, etc. laid to required thickness complete all as specified and as directed

S&F glass dividing strips, 3mm thick, inserted in position, conforming to approved design / type complete all as specified and as directed

M&L for 40mm thick brick tiles laid over and including 15mm thick cement mortar screed in 1:6, jointed and grouted flush in cement mortar 1:3 in roofs complete all as specified and as directed

--ditto-- all as per serial item No. 25 hereinabove but except tiles complete all as specified and as directed Note: Serviceable brick /terracing tiles obtained under serial item No. 09 hereinabove shall be reused in this item

M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. and brushing neat cement slurry with 3.0kg of cement per square metre complete all as specified and as directed

M&L for brickwork with sub-class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:6) complete all as specified and as directed

--ditto-- all as per serial item No. 28 but except bricks

M&L for brickwork with sub-class 'B' bricks, straight or curved on plan as in half brick thick walls built in CM (1:4) complete all as specified and as directed

S&F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc and divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, sizes of members of shutters as specified in clause 8.20 9(b) of SSR Part-I, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., supplied and fitted to chowkats complete all as specified and as directed

S&F 35mm thick 2nd class hard wood plain framed, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, size of rail and style as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete all as shown on drawings, as specified and as directed

S&F pressed steel frames of size 125x60x1.25mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and as directed

S&F 30m thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed

S&F solid PVC door frame of size 50x47mm made out of 5mm thick plain / printed coloured PVC sheet (as approved) reinforced with MS square tube all as per specifications and drawing given in SSR Part-I 2009 all as per manufacturer's instructions and making good the disturbed surfaces complete all as specified and as directed

S&F steel window (box type) factory fabricated, double shutter (glazed and wire gauzed) with side hung shutters including pintle type hinges, steel handles fabricated type for each leaf duly welded, mild steel barrel tower bolts 150mm size (02Nos for each leaf) duly welded, with glazing bars dovetailed including MS fillets, guard bars with one shop coat of red oxide zinc chrome primer overall on entire fabrication complete all as specified and as directed Notes: (i) Windows shall be fabricated as per CE Palam drawing No. TD-219 Sh 1/3 to 3/3 dated 02 Jan 2007 (updated up to date) and these drawings shall be referred at the O/o the GE (AF) Ambala (ii) Glazing, wire gauge, guard bars will be measured and paid separately under respective items herein (iii) Any other sundries, etc. as required at site shall be deemed to be included in the quoted rate

S&F factory made solid panel PVC door shutter, 30mm thick, consisiting of MS frame made out of MS tubes for top and bottom rails, MS frame shall be moulded with plain coloured PVC 'C' channel and having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain coloured PVC sheet top rail, lock rail and bottom rails, paneling of plain coloured PVC sheet to be fitted in MS frame welded / sealed to stiles and rails with suitable PVC sheet beading and jointed together using solvent and fixed in position in frame as per site requirement and specified in MES Schedule 2010 complete all as specified and as directed Door Width Size of style Size of rails exceeding 1.5' but not exceeding 2' 50mm 50mm exceeding 2' but not exceeding 2.5' 50mm 75mm exceeding 2.5' but not exceeding 3' 75mm 100mm exceeding 3' 100mm 125mm

S&F 100mm butt hinges, mild steel, medium weight with stainless steel hinge pin and fixed complete all as specified and as directed

S&F 75mm butt hinges, mild steel, medium weight with stainless steel hinge pin and fixed complete all as specified and as directed

S&F 200mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed

S&F150mm long, aluminium door handles, cast type with back plate 3mm thick, complete all as specified and as direct

S&F 300mm aluminium anodised sliding door bolt with hasp and staple, bolt type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm, complete all as specified and as directed

S&F in repairs galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed

S&F 3mm thick sheet glass, ordinary quality, area not exceeding 0.5sqm in each pane, cut to required size and shape to existing wooden shutters / MS windows / shutters, etc. with glazing clips, glass oil putty, etc including hacking out old broken glass (any thickness), cleaning hacked grooves, removing damaged putty, beads, etc complete all as specified and as directed

S&F 3mm thick pin head/figured glass, ordinary quality, area not exceeding 0.5sqm in each pane, cut to required size and shape to existing wooden shutters / MS windows / shutters, etc. with glazing clips, glass oil putty, etc including hacking out old broken glass (any thickness), cleaning hacked grooves, removing damaged putty, beads, etc complete all as specified and as directed

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps when open 40mm complete all as specified and as directed

S&F in repairs block boards, 25mm thick, grade 1 quality, exterior grade, commercial type, fixed with screws to timber framework complete all as specified and as directed

S&F 2nd class softwood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads, sectional area exceeding 13sqcm but not exceeding 25sqcm complete all as specified and as directed

S&F MS works conforming to Fe-410-0 or Fe-310-0 as in window guard bars, plain duly welded and fixed to steel / wooden frames complete all as specified and as directed

S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed

M&L for rendering 15mm thick plaster, in cement mortar (1:6) on fair faces of brick masonry / concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed

M&L for rendering 15mm thick in cement mortar 1:4 on RCC roof surfaces, mixed with integral water proofing compound @3% by weight of cement content roughened to receive tiles complete all as specified and as directed Note: WPC will be measured and paid separately under respective item herein

M&L for rendering 15mm thick in cement mortar 1:4 on brick / concrete surfaces / on masonry walls, mixed with integral water proofing compound @3% by weight of cement content finished even and smooth without using extra cement complete all as specified and as directed Note: WPC will be measured and paid separately under respective item herein

M&L for rendering 5mm thick plaster, in cement mortar (1:3) on fair faces of concrete surfaces of soffits of slabs, ceilings, etc. finished even and smooth without using extra cement complete all as specified and as directed

Supply only integral water proofing compound as specified

M&L for preparing of new / untreated wood / wood based surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, tint as approved complete all as specified and as directed

M&L for preparing of new steel / metal surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, tint as approved complete all as specified and as directed

M&L for preparing of old / treated wood / wood based surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint, tint as approved complete all as specified and as directed

M&L for preparing of old / treated steel / metal surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint, tint as approved complete all as specified and as directed

M&L for preparation of new masonry / concrete wall surfaces and applying two coats of oil emulsion distemper over a coat of wall primer including a coat of wall care putty 1mm thick including all necessary staging, scaffolding, safety precautions, etc. as required to work at heights, etc. complete all as specified and as directed

M&L for preparation of old masonry / concrete wall surfaces and applying one coat of oil emulsion distemper including filling of holes / cracks with wall putty and all necessary staging, scaffolding, safety precautions, etc. as required to work at heights, etc. complete all as specified and as directed

M&L for preparation of old masonry / concrete wall surfaces and applying two coats of cement based paint over a coat of wall primer, including filling up all holes, cracks, etc. dubbing, with putty and all necessary staging, scaffolding, safety precautions, etc. as required to work at heights, etc. complete all as specified and as directed

M&L preparation of newly plastered / unplastered surfaces and applying three coats of white wash on ceilings complete all as specified and as directed

M&L preparation of old plastered / unplastered, treated / untreated surfaces and applying one coat of white wash on walls complete all as specified and as directed

M&L preparation of old plastered / unplastered, treated / untreated surfaces and applying one coat of white wash on ceilings complete all as specified and as directed

M&L for framed works as in doors or gates of angle or other section with gusset plates, rails, braces, etc. drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing conforming to Fe-410-W grade E-250 quality-A complete all as specified and as directed

S&F angle iron posts & struts in fencing including cutting top to shape, drilling holes, notching for wire including all necessary drilling bolts or rivetting & similar works conforming to Fe-290 grade E-165 (for securing chain link fencing, etc.) with 40x4mm flat iron fillets complete all as specified and as directed

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed at both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 5cm in length, dia of neck & shank 10mm complete all as specified and as directed

M&L for mild steel round bars 10mm dia and over, cut to length, bent to shape required and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in supports to chain link fencing complete all as specified and as directed

M&L for non-skid ceramic tiles, coloured, area of tile exceeding 0.11sqm but not exceeding 0.18sqm each, 7 to 8mm thick of superior quality in floors etc laid over 15mm thick screed bed in CM (1:4) (rate shall be included) set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match shade of tiles complete all as specified and as directed

M&L for coloured glazed designer ceramic tiles, of size 300x200mm x 6 to 7mm thick of superior quality fixed on vertical surfaces such as skirting / dado / risers of step, etc., fixed over backing coat of 10mm thick plaster in CM (1:4) (rate shall be included) set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles all as specified and as directed

M&L for vitrified coloured tiles 10mm thick, of size not exceeding 0.36sqm each, of superior quality, in floors, etc. laid over 15mm thick screed bed in CM (1:6) (rate shall be included) set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match shade of tiles complete all as specified and as directed

M&L for green marble 18 to 20mm thick (table rubbed and polished) in cooking platforms and the like bedded in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including taking down old slab complete all as specified and as directed

S&F vitreous China bowl urinal flat back half stall of size 465x355x265mm (minimum), white, with grating and union for discharge pipe, including providing fixing plugs, brackets, grating, union and connections to flushing pipe, bedding urinal against wall in CM 1:2, securing bowl with plugs and 60mm long brass screws, pointing around urinal bowl in white cement (excluding flushing cistern, flush pipe and waste pipe), taking down and disposing off old urinal bowl complete all as specified and as directed

S&F in repairs vitreous China squatting pan, Orissa pattern of size 580x440mm, white, with integral foot rests and 'P' or 'S' trap, connecting to flushing pipe and trap and making good to the disturbed surfaces in CM 1:3 with finishes to match with the existing complete all as specified and as directed

S&F in repairs vitreous China wash down water closet pan (Pedestal pattern), 400x550x200mm dimensions, white colour, with 'P' or 'S' trap, including flush pipe, trap, connection to drain or outgoing pipe, anti-syphonic pipe, white seat cover as approved, closed pattern with flat bottom & cover and chromium plated mild steel or aluminum anodized hinge device and jointing and connecting up complete all as specified and as directed

S&F 10litres capacity PVC flushing tank, syphonic action type, low level, valveless, with PVC inlet ball valve, PVC flush pipe, float, chain and pull and suitable sized brackets including cutting of floor / wall and making good to the disturbed surfaces in CM 1:3 with finishes to match with the existing and taking down of old PVC flush tank and disposing off complete all as specified and as directed

S&F wash hand basin, vitreous China, white, flat back type, of size 640x450mm, including CI brackets, cutting for and pinning in ends of brackets with coupling and including PVC connection 60cm key with brass union, fixed as in repairs complete all as specified and as directed

S&F in repairs sink with drainage board overall size 915mmx460mm and bowl size 410x330x160mm, made of stainless steel 1mm thick for kitchen with plugs, washer and waste in repairs including in cement mortar to dwarf wall or including fixing cantilever brackets and connection union to pipe complete all as specified and as directed

S&F in repairs 15mm dia bib taps, fancy type, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed

S&F in repairs 15mm dia pillar taps, fancy type, cast copper alloy, with capstain heads, chromium plated, screwed down, high pressure, with or without lettered 'HOT'/'COLD', with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed

S&F in repairs MS tubing 20mm bore, PVC coated, tint, type and design as approved as in drapery rods / curtain rails with and including pair of fancy type end knobs complete all as specified and as directed

S&F in repairs cast copper alloy towel ring, 200mm dia, with flange, fixed with chromium plated screws on masonry / tiled wall surfaces including all drilling, etc. complete all as specified and as directed

S&F health faucet, telephone type, with CP arms, flexible pipe (ABS body) with 1.0m long PVC tube and wall hook of approved finish complete all as specified and as directed

S&F in repairs cadmium plated water sprayer nozzles suitable for urinals of existing dia and type complete all as specified and as directed

S&F steel water tubing, medium grade, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings, ISI marked conforming to IS -1239 and fixed to walls or laid in floors / trenches required for protection of electric clables complete all as specified and as directed for the following bores:

Fixing only steel water tubing, medium grade, galvanised with screwed and socketed joints, including supply and fixing all fittings, ISI marked conforming to IS -1239 and fixed to walls or laid in floors / trenches required for protection of electric clables complete all as specified and as directed for the following bores: Note: Serviceable tubings obtained from serial item Nos. 14 & 15 will be reused under this item

S&F in repairs UPVC floor trap with PVC grating suitable for 75mm external dia, type B pipes, including jointing with solvent cement complete all as specified and as directed

S&F in repairs PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement for 110mm external dia type-B pipes complete all as specified and as directed

S&F PVC (SWR) bends, 110mm bore, ISI marked, any radius with rubber ring joints, etc. complete all as specified and as directed

S&F PVC (SWR) bends, 75mm bore, ISI marked, any radius with rubber ring joints, etc. complete all as specified and as directed

S&F PVC (SWR) vent cowl 110mm bore, ISI marked, any radius with rubber ring joints, etc. complete all as specified and as directed

M&L for cleaning of internal surfaces of PVC overhead water storage tanks of capacity exceeding 250litres but not exceeding 500litres, including staging (if required), at any position / location, by scrubing the surfaces with the help of coir brush, jute cloth and flushing out all the accumulated mud / silt inside the tank, then applying two coats of lime wash on all internal surfaces like wall, ceiling, floor, etc. and writing tank number, capacity of tank, date of cleaning with white synthetic enamel paint over a black synthetic enemal paint base (of suitable dimensions) with size of letter 4" height complete all as specified and as directed

Supplying, hoisting, fixing and connecting up rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) of capacity 500litres, hoisted and fixed in position all as specified in SSR Part-I including connecting the overflow drain out, inlet and outlet pipes, tank nipple, elbow, bend, unions, sockets, etc. and taking down of old tank from any location complete all as specified and as directed

M&L for laying pre-polished 60mm thick rubber moulded, double glossy, coloured, designer, interlocking tiles made of M-40 design mix concrete of approved design and shape with the crushing strength not less than 250kg/sqcm laid over and including 25mm thick (compacted thickness) sand bed (rate shall be inlcuded) complete all as specified and as directed

S&F MS galvanised chain link fencing, any size or type including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire complete all as specified and as directed

S&F in repairs galvanised 2 strand, steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and including provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed

M&L for machine cut and machine polished kota stone slab 20 to 25mm thick as in floors, laid over and including 20mm thick screed bed in CM 1:4 (rate shall be included), set and jointed in neat cement slurry and pointed with cement and pigments to match the shade of slab including rubbing and polishing etc. complete all as specified and as directed

M&L for Atactic Poly Propaneylene (APP) modified bituminous membrane, weight not less than 4.0kg/sqm, reinforced with non-woven polyester fibre @160gm/sqm by torch method as per manufacturer's instructions complete all as specified and as directed Specifications for membrane: (i) Softening point 150oC minimum (ii) Cold flexibility (-)2oC minimum (iii) Single centre core non-woven polyester reinforcement of not less than 160gm/sqm (iv) Tensile strength of 650N/sqcm and 450N/sqcm in longitudinal and transverse directions respectively (v) Minimum elongation of >20% in both directions (vi) Dimensional stability of 1% maximum (vii) Water tightness / impermiable at 2kgf/sqcm (viii) Water absorption of not more than 1% on mass within 24hrs (ix) Overlaps of minimum 100mm on longitudinal direction and 150mm along transverse direction shall be maintained while laying

Swami Engineers

Esha Engineers

s.v.builders