KB/TSR/RO/AMD/9950/PBLV/26-27

APPENDIX - 1 (INTERIOR WORKS)

OD Painting: with synthetic enamel paint for doors and windows including all cost etc complete.

OD Finishing with Deluxe Multi surface paint system for interiors and exteriors using special primer applied @ 0.75 ltr /10 sqm, as per manufacturers specifications. Two or more coats of PU emulsion paint applied on walls @ 1.25 ltr/10 sqm , including all cost etc. complete.

Double Skin Solid Partition The partitions are of double skin type for height of 260cm/ false celing height. The inner side frame work ae of country wood 5cm x 3.5cm with verticlas and horizontals 60cm c/c, which is covered with 6mm thick marine plywood IS 710 on both sides and finished with 1mm thick lamination .Skirting for a height of 10cm with 12mm thick plywood finish with 1 mm thick mica lamination. The exposed edges of partition where doors are fixed should be sealed with plywood 7.5cm x 1.2cm thick. the partition is to be firmly fixed to the floor and ceiling. Measurement for partition will be up to false ceiling from floor level.

Semi Glazed Sliding Door Providing & Fixing Plywood Door with pelmet as per architect approved drawing. Pelmet and Shutter frameworks finished with 19mm plywood (IS 710 Grade, BWP Caliberated plywood/Equivalent). Both sides of the shutter frame to be finished with 6mm plywood Both sides of the shutter frame and visible portion of pelmet to be finished with 1 mm thick laminate finish using suitable adhesive (Fevicol/Equivalent) 8 mm thick plain glass to be fixed in the door as per design intent. Complete using necessary Sliding door fittings like Top line 80 soft runner, lock, handle(Hafele /Equivalent) etc., Finish the doors with necessary grooves, SS strips etc. if any. Including cost and conveyance of all materials labour charges etc. complete as per drawing.

Providing and fixing horizontal zebra blinds of approved make and approved colour.

Providing and fixing tiled false ceiling of approved materials of size 595 x 595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized stoel sections (galvanized @ 120 grams per sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making. opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using Gl slotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to ceiling with 12.5mm dia and 50 mm long dash fasteners, 4 mm Gl adjustable rods with galvanised butterfly level clips of size 85x 30x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. Gt Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 nm drop, made of Gl sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.

12mm toughened glass double door Providing and fixing door of 12mm thick Toughened glass door (Saint Gobain/ Equivalent) with (dormakaba/Equivalent) patch fittings (Floor Spring, Top patch, pivot Pin, Bottom patch, Corner lock, Handle. Including all cost and conveyance of materials, labour etc complete.

12mm Toughened Glass Partition with patch fittings: Providing and fixing 12mm thick Toughened glass(Saint Gobain) Partition System with SS Patch Fittings(Dorma kaba Equivalent) as per design intent.Including all cost and conveyance of materials, labour etc complete.

APPENDIX - II (ELECTRICAL WORKS)