SPECIAL REPAIR TO ROAD (APPROX 1500 MTRS) INSIDE DEPOT AREA AT ARMY AREA BANAR UNDER GE BANAR

Amount

M&L for Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exceeding 400 sqm and not exceeding 50mm deep complete all as specifed and as directed.

M&L for Applying evenly a priming/tack coat with bituminous primer at 10 kg per 10 sq metre on unsurfaced surfaces ie., on pot holes complete all as specifed and as directed.

M&L for laying premixed bituminous macadam using VG-40 grade paving bitumen (using binder not less than 4% by weight of total mix) rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) using 8 to 12 ton power roller complete all as directed and specified.

M&L for preparing black top surfaces of roads by brushing with wire brush for removing cracked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc., complete all as directed and specified.

M&L for applying evenly a tack coat with paving bitumen VG-10 grade at the rate of 5.0Kg per 10Sqm complete all as directed and specified.

M&L for bituminous premix semi dense asphaltic concrete, 30mm consolidated thickness with 5.5% binder content by weight of total mix using paving bitumen VG-40 grade mixed in computerized hot mix plant and laid with mechanical paver, rolled and compacted to required camber or gradient using 8 to 12 ton power roller complete all as directed and specified.

M&L for preparing bituminous road surfaces and marking 2.5mm thick center lines, stop lines, dashes, arrows, letters etc and the like not exceeding 10cm width, with hot applied Thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

S&F in repairs Solar cat eye aluminum alloy shell (100% water proofing design according to IP65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) and consisting of super bright LED with 10,000 to 18,000 mcd fixed with and including MS stud of suitable size as per manufactures instructions etc. including taking out old unserviceable one complete all as specified and directed

S&F in repairs Cat eye type of metal body alloy of size 100mm x 100mm x 20mm with PAMA strip lens reflector of fixed with and including MS stud of suitable size as per manufactures instructions including taking out old unserviceable one complete all as specified and directed

S&F in repairs metal tubular Solar delineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomeric 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in 150x150x300mm size PCC 1:2:4, type B1 using 20mm graded stone aggregate necessary form work, earth work etc., complete all as specified and directed.

ABHOG INFRASTRUCTURE PRIVATE LIMITED

MOHIT ENTERPRISES

D DEV COMPANY

M/S OM VISHNU ENGINEERING & CONSTRUCTION COMPANY