Mtc. of different roads at AMC Ward No. 33, 37, 39, 40, 47, 49 etc under central VIII sub-division, PWD (R_B) during the year 2025-26

Road marking strips (retro-reflective) of specified shade/ colour using Hot Applied Thermoplastic material with Reflectorising Glass beads on Bituminous surface Providing and applying 2.5 mm thick road marking strips (retro-reflective) of specified shade/ colour using hot Thermoplastic material including reflectorising glass beads @ 250 gm per sqm area by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater including cost of cleaning the road surface of all dirt, seals, oil, grease and foreign material etc thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free form streaks and holes as per MoRT&H technical specification clause 803

Road Markers/Road stud with lense reflector Providing and fixing of road stud 100X100 mm, die-cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling hole 30 mm upto a depth of 60 mm and bedded in a suitable bituminous grout or epoxy morter, all as per BS 873 part 4:1973.

Drum Delineator in Construction Zone Provision of metal drum/empty bitumen drum delineator, 300 mm in diameter, 800 mm high, filled with earth for stability, painted in circumferential strips of alternate black and white 100 mm wide fitted with reflectors 3 Nos of 7.5 cm dia, all as per IRC:SP:55-2001.

Road Safety Convex Mirror Providing and fixing pole mounting (50 mm dia steel pole of standard height) 800 mm dia strong unbreakabale highly reflective road safety convex mirror body made up of poly carbonate having large viewing angle from standard distance (minimum 6 m) firmly fixed to the gound by means of properly designed foundation with M-15 grade cement concrete 450mm x 45mm x 600 mm as per IRC guideline/ MoRT&H Technical Specification Clause 801.

Solar Powered Road Markers (Solar studs) Providing and fixing Solar Powered Road Markers (Solar studs) of specified size to meet the requirement of technical specification clause 804.6 made of aluminium alloy and poly carbonate material which shall be absolutely weather resistant and shall support a load of 13.635 tonne tested in accordance with ASTM D 4280, of appropriate color & water resistant to meet the requirement of IP 65 in accordance with IS: 12063:1987 category 2 for protection against water ingress. It shall have super bright LEDs of flashing rate not less than 1Hz having a life of not less than three years. The slope of retro-reflective surface shall be 35 (± 5) degrees to base. The studs shall be fixed to the Road surface in accordance with technical specification clause no. 804.7.2 using the adhesive conforming to IS or as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-Charge and in field performance as per technical specification clause no. 804.7.3.

Traffic Signs (using jhama brick aggregate in CC/ PCC) A. Retro-reflectorised Traffic Signs Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide MoRD technical specification Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete (using jhama brick aggregate) 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawings and MoRD Technical Specification Clause 801. i)with 900 mm equilateral triangle aluminium sheeting

ii) with 600 mm equilateral triangle aluminium sheeting

iii) with 600 mm circular aluminium sheeting

iv) with 800 x 600 mm rectangular aluminium sheeting

v) with 600 x 450 mm rectangular aluminium sheeting

vi) with 600 x 600 mm square aluminium sheeting

vii) with 900 mm side octagon aluminium sheeting

Please Enable Macros to View BoQ information