CWE BLY/GE (W) /75 OF 2023- 2024 REPAIR TO BOUNDARY WALL FENCING GATE, DRAIN HARD STANDING IN THE AOR OF AGE B/R-II UNDER GE (WEST) BAREILLY

Amount

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation bed of drains and steel post embeded etc complete all as specified and directed.

M&L for PCC 1:2:4 type B-1(using 20 mm graded stone aggregate) as in coping, mud stopers channels/benching of manhole, laid to shape and slope and surfaces finished even and smooth using extra cement, complete including all form work etccomplete all as specified and directed.

M&L rendering 15 mm thick on fair faces of brick in CM 1:4 mixed with water proofing compouind where ever required in proportion as per manufacturer"s instructions, including finishing the surfaces even & smooth without using extra cement complete all as specified and directed.

Supply only integral water proofing compound (powder) complete all as specified and directed.

M & L proving pre cast reinforced cement concrete type B1 1:2:4 (using 20mm graded stone aggregate) as in cover slabs for drain, shelves and similar articles with plain fair faces, etc. and setting in cement mortar (1:6) complete. Note size as specified by engr -in-chage

Supply and fix TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) but not less than 0.9 mm dia conforming to Fe-410 - 0, complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, aches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articlescomplete all as specified and directed.

M&L for Brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in cement Mortar in 1:4 complete all as specified and directed.

M&L for Brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in cement Mortar in 1:6 complete all as specified and directed.

Taking down cement or cement lime plaster any description on brick walls etc. including racking out joints hacking for keys scrubbing down with water.

M&L rendering 15 mm thick in CM 1:4 on brick work (other than fair faces) including finishing the surface fair and even without using extra cement.

M&L 15mm thick cement plaster on brick surfaces or concrete surfaces in cm (1:6) including finishing the surface even and smooth without using extra cement all as specified and directed.

M&L 15mm thick cement plaster on brick surfaces or concrete surfaces in cm (1:4) including finishing the surface even & smooth without using extra cememt all as specified and directed.

M & L applying two coats of cement based paint on newly plastered or unplastered wall surface including preparation of surfaces, complete all as specified and directed.

Excavation in Post holes (or similar holes ) in any type of soil, each not exe 0.5 cum , getting out , returning filling and ramming carts not exc 25cm , watering and removing surplus soil to a distance not exc 50 mtr and making good surface complete all as specified and directed.

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground, embedded with concrete etc complete all as specified and directed.

Fixing only chain link fencing including line wires any mesh, size and type to any type of standards, rails, straining bolt, etc including provision of binding wire complete all as specified and directed.

Dismantling of fencing wire mesh, any type old barbed wire fencing complete all as specified and directed by Engineer-in-Charge.

S&F galvanized 2 strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type standard rails, staining bolts incl securing, tying at crossing with and provision of galvanized steel wire staple or steel pins etc as directed fixed in repairs. (Each line to be measured)

Supply only chain link MS galvanised fencing any size or typecomplete all as specified and directed.

S&F M S Posts and struts in fencing (any size of angle) mm including cutting tops to shapes as directed including driling holes for bolting of MS flat iron in horizontal, vertical & diagnal faces of each pannel to be intertwined with Chain link fencing, and fixed to posts with MS nut bolts of exc 5 cm n exc 10 cm in lenth and 10-15 mm dia and washers ,wind ties for sign board posts and struts, MS round bars and similar work confirming to Fe 290 Gde E-165 complete all as spd and directed

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and fastening and fixing complete FE 290 Gde E-165 complete all as specified and directed.

M & L for Steel work in tubular hollow section of framing, rail including special shaped washer etc complete all as specified and directed.

S&F in repair fiber sheets 1.5 mm thick of any colour having high tensile strength fixed with MS plate, self screw and nut bolts all necessary fittings on gates, complete all as specified and directed. Note : Sheet colour approved by GE

Dismantling structural steel work including doors, gates but excluding framed truss etc.s any type and size complete all as specified

M&L for painting to new steel surface exc 10 cm width or girth with two coats of synethic enamel paint over a coat of red oxide primer including preparation of newly or previously untreated surface all as spd and directed

M& L for 75 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base floor / pavings complete all as specified & directed

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M&L for Machine pressed cement concrete factory made coloured glazed interlocking paver block any shape and size confirming to IS 15658 -2006 of 80 mm thickness, M-40 Grade, machine pressed of pattern and colour as approved by GE all complete all as specified and directed.

M&L for Machine pressed cement concrete factory made coloured glazed interlocking paver block any shape and size confirming to IS 15658 -2006 of 60mm thickness, M-35 Grade, machine pressed of pattern and colour as approved by GE all completed as specified and directed.

M&L for PCC (1:2:4) type B1 using 20mm graded agg for machine pressesd precast cement concrete kerb stone including weathering, slightly rounded or chemferred angles and throating , as directed edges complete including excavavtion for kerb stone and filling after embeded including watering and well ramming complete all as specified and directed.

M&L for coloured glazed chequered cement concrete 20cm x 20cm x 25mm thick With mixture of grey and white cement in equal proportions and no pigment set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over screed bed or bedding layer of mortar, 20 mm thick, in cement mortar 1:6, for laying floor finishes, laying over 25 mm thick PCC 1:2:4 type B0, using 12.5mm graded aggregate as in floors complete all as specified and directed.

RIYASAT ALI KHAN

multiple alliance enterprises

REHAN CONSTRUCTIONS

VISHAL CONSTRUCTIONS

JAI SRI RAM ASSOCIATE

hardeep singh enterprises

M/S YASHCON CONSTRUCTIONS