Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹76.0 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹78.6 L+₹2.6 L (3.36%)Admitted-Finance | L2 | Admitted-Finance | |
| 3 | L3₹79.7 L+₹3.7 L (4.85%)Admitted-Finance | L3 | Admitted-Finance | |
| 4 | L4₹85.0 L+₹9.0 L (11.8%)Admitted-Finance | L4 | Admitted-Finance | |
| 5 | Rejected-Technical | - | Rejected-Technical technical specifications os pump is not at par with NIT specifications/acceptance of terms and conditions |
| Sl No | Description | Qty | Unit | M/s H A ENTERPRISES L1 | KESAR IMPEX L3 | M/S NEW HIMALAYA ENTERPRISES KARGIL L4 | M/S MUNTAZIR ENTERPRISES L2 |
|---|---|---|---|---|---|---|---|
| 1.00 | Multi stage centrifugal pump coupled with 3-phase Squirrel Cage Induction Motor:
Design, supply, installation, testing and commissioning of multistage horizontal centrifugal pump along with motor and allied accessories.
Pump Material of Construction:
Casing – Cast Iron IS 210 Grade FG 260
Impeller – SS ASTM A 351/M CF8M
Shaft – SS ASTM A 276 Type 410
Shaft Sleeve – SS ASTM A 276 Type 410 (Hardened)
Motor Specification:
3 - Phase TEFC Squirrel Cage Induction Motors with Enclosure conforming to protection IP 55, continuously rated (S1) suitable for operation on 415+/- 10% V, 50Hz+/- 5% AC supply with ambient 50ºC, Class "F" insulation with temperature rise limited to Class "B". Performance Efficiency/ Parameters shall be in accordance with IE-2 values conforming to IS 12615:2011 or IEC 60034-30-1-2014.
Pump Performance: Service: Irrigation, Rated Discharge = 2 Cusec
Total Dynamic Head = 120 meter, NPSH (A) = 3.0 meter, Efficiency at duty point =70%, Speed = upto 1500 RPM (Synchronous)
Motor Rating (max) =…. To be quoted by bidder, Selected motor rating shall be higher than following:
i. 125% of pump input at duty point, ii. Maximum power consumed by the pump in the entire operating range. Operating range may be considered from 110% to 85% of rated head. , Altitude of installation: Kargil, 2676m (deration on account of altitude shall be taken careof while designing)
The job includes parallel combination of two pump sets. Each pump set shall be fitted with control valves having suitable pressure rating; Cast Iron Non Return Valve (NRV) and Sluice Valves, ERW MS Suction 15 meters and Delivery 5 meters pipe with long radius 90o bends and foot valves with strainer, clips, clamps and nipples.
Delivery pipes of each pump shall be fitted to common pressure header. Provision shall be provided for priming facility using 25 mm heavy duty ball valves 25 mm ERW/ MS Pipe with each pump and etc.
The sizes / quantities of the control valves and suction delivery pipe and other accessories shall be in accordance with the size of the pump and site condition. | 2 | Sets | 11,20,000 ₹22,40,000 | 16,00,000 ₹32,00,000 | 10,44,786 ₹20,89,572 Lowest | 13,07,750 ₹26,15,500 |
| 2.00 | Control panel with one Incomer and two out goings for two pump sets in parallel Operation. (One running and the other standby and vice versa) STAR-DELTA starter for each pump sets (item-1)
Design, fabrication, assembling, wiring, Installation testing and commissioning fixed type, floor mounted, cubical design motor control panel fabricated out of 2mm/14 SWG CRCA thick sheet duly painted, suitable for indoor use, internally wired complete with bus bar covered with PVC heat shrinkable sleeves, colour coded. Panel shall be fitted with 02 Nos. STAR-DELTA motor starters suitable for 3-
phase, 415 Volts, 50 Hz Squirrel Cage Induction Motors,
with all components of suitable rating fixed and wired in the panel.
The panel shall be complete with all protections in-built (Over load/PTC/Line fault / Voltage imbalance / Phase reversal / Under voltage / Over voltage / Over temperature / Open Gate / Excessive Starts per Hr, Single phasing), Main incoming MDO ACB with short circuit release including earth fault and under voltage protection. Bus bar, metering ( incoming and outgoing Voltmeter, Ampere meter, Frequency meter) (3-phase current/3-phase voltage/power factor of running motor, phase indication lamp (RYB with CTs), outgoing MCCB for each pump sets, capacitor Bank for an improved power factor of .95 to 1, over load relays. The control panel shall be complete with single core copper cable of size 300 mm2 of 100 RMT confirming to IS 694 with required thimbles from LT transformer to Panel and 3 ½ core Cu Cable of 25 RMT of current rating more than 350 Ampere. | 1 | Nos | 7,19,300 ₹7,19,300 Lowest | 10,00,000 ₹10,00,000 | 11,84,786 ₹11,84,786 | 8,50,000 ₹8,50,000 |
| 3.00 | Maintenance free earthling:-
S.I.T.C. of ALLTEC make long life maintenance free electrolytic earthling system with 10 feet vertical k type copper not less then 2”(50.8mm)ID and not less than 0.08”(2.03mm) wall thickness ,which does not require manual addition of water .The system should be corrosion resistant pre-filled with hygroscopic powder and provided with suitable breathing and leaching ports at the ends. Rated for high fault currents bas bar rated for 10KA, fault current bus bar connection type as “Terraweld” to with hold temperature of 7000C.The earthling port shall be designed and supplied with poly plastic port cover non conductive, environment friendly and lockable. | 3 | Nos | 6,500 ₹19,500 Lowest | 20,000 ₹60,000 | 39,786 ₹1,19,358 | 13,500 ₹40,500 |
| 4.00 | Complete Pump Tool Kit
Crimping Tool Hydraulic Type = 1 No
Spanner double ended set = 1 set
Ring spanner set = 1 set
Screw driver = 1 set
Socket = 1 set
Grease Gun Bucket type = 1 No | 1 | Sets | 50,000 ₹50,000 | 25,000 ₹25,000 Lowest | 34,786 ₹34,786 | 27,000 ₹27,000 |
| 5.00SUPPLY AND FIXING OF RAISNG MAIN (The design, material, manufacture, inspection and testing of pipe and valves shall comply with the requirement of latest edition of codes and standard as specified or BS, IS and ASME as applicable) | |||||||
| 5.10 | MS pipe 8" (200 mm nominal Dia.) medium grade fitted with flanges min 10 mm confirming to IS: 3589-2001. Job includes supply of long radius bends required as per site conditions,
Specifications:
1. Type : MS ERW Pipe
2. Nominal Bore Size = 200 mm (8")
3. Wall Thickness : > 5.2 mm | 700 | Mtr | 4,571 ₹31,99,700 | 3,800 ₹26,60,000 Lowest | 3,900 ₹27,30,000 | 4,450 ₹31,15,000 |
| 5.20 | 200MM Non Return valve, PN25, Conforming to BS 5153 (EN 12334) / IS 5312 Part 1 & 2, BS 5160/DIN 2401 and latest | 3 | Nos | 52,000 ₹1,56,000 | 70,000 ₹2,10,000 | 24,786 ₹74,358 Lowest | 26,500 ₹79,500 |
| 5.30 | 200MM Non Return valve, PN 16, Conforming to BS 5153 (EN 12334) / IS 5312 Part 1 & 2, BS 5160/DIN 2401 and latest (as applicable) | 2 | Nos | 52,000 ₹1,04,000 | 59,000 ₹1,18,000 | 36,786 ₹73,572 | 21,900 ₹43,800 Lowest |
| 6.00Construction of Anchor Block | |||||||
| 6.10 | Construction of PCC Anchor block of size 2’ x 2’ x 4’ using (1:2:4)mix @20 feet c/c. Job includes cost of material, labour, shuttering, tools and tackles etc. The job also includes fixing of 02 Nos. 6mm ms strip with suitable anchor bolts to fasten the Pipe on the anchor block.
Block size = 2’8”x2’8”x4’ = 0.808Cum
Total No. of blocks 116blocks | 116 | blocks | 3,500 ₹4,06,000 Lowest | 4,400 ₹5,10,400 | 12,786 ₹14,83,176 | 5,500 ₹6,38,000 |
Tender Value
Refer Docs
EMD Value
₹1.9 L
Closing Date
24 Feb 2022, 2:00 pmClosed
Executive Engineer Mech Div Kargil
Office of Executive Engineer Mech Div Kargil
Design, Supply, Testing and Commissioning of Multi stage Split case/Centrifugal Pump coupled with squirrel cage Induction motor with its allied accessories and raising main for Lift Irrigation Scheme Hundarman Mall, Kargil
2022_PWD_5737_1
MDK/E-NIT/72 OF 2021-22
Open Tender
Pumps/Motors
Turn-key
90 days
LIS Hundurman Mall
Please refer Tender documents.
7 documents required · 7 mandatory
₹2,000
EXECUTIVE ENGINEER MECHANICAL DIVISION KARGIL
₹1.9 L
Office of Executive Engineer Mech Div Kargil
11 Mar 2022
2 Feb 2022
24 Feb 2022
2 Feb 2022
24 Feb 2022
2 Feb 2022
10 Feb 2022
Amount
Control panel with one Incomer and two out goings for two pump sets in parallel Operation. (One running and the other standby and vice versa) STAR-DELTA starter for each pump sets (item-1) Design, fabrication, assembling, wiring, Installation testing and commissioning fixed type, floor mounted, cubical design motor control panel fabricated out of 2mm/14 SWG CRCA thick sheet duly painted, suitable for indoor use, internally wired complete with bus bar covered with PVC heat shrinkable sleeves, colour coded. Panel shall be fitted with 02 Nos. STAR-DELTA motor starters suitable for 3- phase, 415 Volts, 50 Hz Squirrel Cage Induction Motors, with all components of suitable rating fixed and wired in the panel. The panel shall be complete with all protections in-built (Over load/PTC/Line fault / Voltage imbalance / Phase reversal / Under voltage / Over voltage / Over temperature / Open Gate / Excessive Starts per Hr, Single phasing), Main incoming MDO ACB with short circuit release including earth fault and under voltage protection. Bus bar, metering ( incoming and outgoing Voltmeter, Ampere meter, Frequency meter) (3-phase current/3-phase voltage/power factor of running motor, phase indication lamp (RYB with CTs), outgoing MCCB for each pump sets, capacitor Bank for an improved power factor of .95 to 1, over load relays. The control panel shall be complete with single core copper cable of size 300 mm2 of 100 RMT confirming to IS 694 with required thimbles from LT transformer to Panel and 3 ½ core Cu Cable of 25 RMT of current rating more than 350 Ampere.
Maintenance free earthling:- S.I.T.C. of ALLTEC make long life maintenance free electrolytic earthling system with 10 feet vertical k type copper not less then 2”(50.8mm)ID and not less than 0.08”(2.03mm) wall thickness ,which does not require manual addition of water .The system should be corrosion resistant pre-filled with hygroscopic powder and provided with suitable breathing and leaching ports at the ends. Rated for high fault currents bas bar rated for 10KA, fault current bus bar connection type as “Terraweld” to with hold temperature of 7000C.The earthling port shall be designed and supplied with poly plastic port cover non conductive, environment friendly and lockable.
Complete Pump Tool Kit Crimping Tool Hydraulic Type = 1 No Spanner double ended set = 1 set Ring spanner set = 1 set Screw driver = 1 set Socket = 1 set Grease Gun Bucket type = 1 No
SUPPLY AND FIXING OF RAISNG MAIN (The design, material, manufacture, inspection and testing of pipe and valves shall comply with the requirement of latest edition of codes and standard as specified or BS, IS and ASME as applicable)
MS pipe 8" (200 mm nominal Dia.) medium grade fitted with flanges min 10 mm confirming to IS: 3589-2001. Job includes supply of long radius bends required as per site conditions, Specifications: 1. Type : MS ERW Pipe 2. Nominal Bore Size = 200 mm (8") 3. Wall Thickness : > 5.2 mm
200MM Non Return valve, PN25, Conforming to BS 5153 (EN 12334) / IS 5312 Part 1 & 2, BS 5160/DIN 2401 and latest
200MM Non Return valve, PN 16, Conforming to BS 5153 (EN 12334) / IS 5312 Part 1 & 2, BS 5160/DIN 2401 and latest (as applicable)
Construction of Anchor Block
Construction of PCC Anchor block of size 2’ x 2’ x 4’ using (1:2:4)mix @20 feet c/c. Job includes cost of material, labour, shuttering, tools and tackles etc. The job also includes fixing of 02 Nos. 6mm ms strip with suitable anchor bolts to fasten the Pipe on the anchor block. Block size = 2’8”x2’8”x4’ = 0.808Cum Total No. of blocks 116blocks
Construction of RCC Anchor block (As per Drawing A) using (1:2:4) mix @ 150 mtr-c/c. Job includes cost of materials, including straightening, bending, cutting and placing position, binding all reinforcement, earth excavation, centring shuttering and removal of farm work, carriage charges complete. Total Quantity = 5 blocks
Foundation Block: Construction of RCC foundation block each pumpset and PCC foundation control panel of using (1:2:4) mix . Job includes cost of material, labour, shuttering, tools and tackles etc complete. Block size For pumps = 4’x7’x3’ x 02 Nos. For form Control panel = 2’x7’x2’ x 01 Nos.
Gantry Crane: Supply installation testing and commissioning of , portable, manually operated, single girder , gantry crane for indoor use for lifting and lowering of pumps of following specifications, confirming to IS 807/ 2006 & IS-3177/ 1999 a: 1. Capacity : 2.5 ton 2. Type: Single Girder (of ISMB Girder of recommended size) 3. Max Height: upto 12 Ft. 4. Span: 6 feet (aprox)
M/S MUNTAZIR ENTERPRISES
KESAR IMPEX
M/S NEW HIMALAYA ENTERPRISES KARGIL
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .