DEPOSIT Govt Medical College Kozhikode Health and Family Welfare Department Annual Plan2022 23 Medical Education Implementation of Plan Scheme Government Medical College Kozhikode Minor works Segregation of power system Essential and Non Essential

Amount

ELECTRIFICATION

90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

90.14.2.2:Supply and providing 3mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.

90.14.3.1:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardA' section neoprene beeding suitable for 1.60/ 2.00 mm sheet

90.14.4:Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC)

90.14.6:Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.

90.14.7:Supply and providing copper earth bus in the panel board

90.14.10.5:Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.16A -100A, 35/36 kA (Ics=100%Icu), 3 pole, current limiting type MCCB with microprocessor based release with overload setting of 50 - 100% having adjustable OL & SC

90.14.10.11:Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.125A, 35/36 kA (Ics=100%Icu), 4 pole, current limiting type MCCB with microprocessor based release with overload setting of 50 - 100% having adjustable OL & SC

90.14.10.12:Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.160A, 35/36 kA (Ics=100%Icu), 4 pole, current limiting type MCCB with microprocessor based release with overload setting of 50 - 100% having adjustable OL & SC

90.14.10.13:Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.200A, 35/36 kA (Ics=100%Icu), 4 pole, current limiting type MCCB with microprocessor based release with overload setting of 50 - 100% having adjustable OL & SC

90.14.10.14:Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.250A, 35/36 kA (Ics=100%Icu), 4 pole, current limiting type MCCB with microprocessor based release with overload setting of 50 - 100% having adjustable OL & SC

90.14.10.17:Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.320A/400A, 50/55 kA (Ics=100%Icu), 4 pole, current limiting type MCCB with microprocessor based release with overload setting of 50 - 100% having adjustable OL & SC

OD169790/2022-2023:Providing and fixing following capacity FP disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.800 amps. FP switch fuse unit with three numbers ISI marked BS type HRC fuses, Open Execution Type FN S-D-F suitable for DIN fuse-link (4P) (Make : Type L&T FNX.8000FP- Cat.No. SK95821 or equivalent make disbarment proved

OD194189/2022-2023:Supply, Conveyance and fixing HRC Fuse Link 630A suitable for L&T FNX 8000FP SFU- DIN fuse Link Type L&T - SF94437 or equivalent Make

OD185323/2022-2023:Providing and fixing following capacity On load COS switch unit inside the existing panel board including drilling holes in cubicle panel, making connections and Rotary handle (including BUC handle with door inter-lock defeat and pad lock facility) for 400A extended etc. as required. 400 Amp 4Pole COS

90.11.1.20:Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required8 way (8+12) - double cover TPN vertical DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP 42/43)

90.14.11.13:MCCB AccessoriesSupply and fixing rotary handle, External type (including BUC handle with door interlock ) in the existing MCCB of rating up to 250 A

90.14.11.15:MCCB AccessoriesSupply and fixing rotary handle, External type (including BUC handle with door interlock ) in the existing MCCB of rating up to 315-630 A

OD140408/2022-2023:supply and fixing Red, Green, blue, Yellow, Orange colours LED indicator, AC/DC, as required

OD140409/2022-2023:Supply and providing 2A SP MCB suitable mounded on panel boards as required including all charges

OD175201/2022-2023:Supplying and fixing 40 amps to 63 amps rating, 240/415 volts, "C" curve Triple pole, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

OD140410/2022-2023:Supply and fixing Spreader/Terminal adapter Kit Extended terminal for 4 pole MCCB of rating 400 A (8 pcs) L&T DN3B/DN3-400 4 Pole Cat.ST98066OOOO or equivalent

OD192369/2022-2023:Supply and fixing Spreader/Terminal adapter Kit Extended terminal for 4 pole MCCB of rating 250 A (8 pcs) L&T DN1/DN2-250 4 Pole Cat.CM92007OOOO or equivalent

OD140411/2022-2023:Supply and providing Multi function meter to read: V, A, F, 3 phase accuracy class 1

90.12.6.30:Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required.3.5 core 70 sq mm

90.12.6.31:Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required.3.5 core 95 sq mm

90.12.6.34:Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required.3.5 core 185 sq mm

90.12.6.37:Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required.3.5 core 400 sq mm

90.12.7.27:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 25 sq mm with factory made clamp

90.12.7.28:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 35 sq mm with factory made clamp

90.12.7.30:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 70 sq mm

90.12.7.31:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 95 sq mm

90.12.7.34:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 185 sq mm

90.12.7.37:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 400 sq mm

9.1.20:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X25 sq.mm (28mm)

9.1.21:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 35 sq. mm (32mm)

9.1.22:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 50 sq. mm (35mm)

9.1.23:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 70 sq. mm (38mm)

9.1.24:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 95 sq. mm (45mm)

9.1.25:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 120 sq. mm (45mm)

9.1.27:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 185 sq. mm (57mm)

9.1.29:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 240 sq. mm (62mm)

9.1.30:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 300 sq. mm (70mm)

9.1.31:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 400 sq. mm (82mm)

90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

90.16.3.9:Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run)25 x 3 mm copper strip

90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

OD141271/2022-2023:Supply and providing 25 x3 brass nut and bolt

OD141272/2022-2023:Supply and provididng 26 x 6 mm brass nut and bolt etc as required

OD141273/2022-2023:Supply and provididng 12x3 brass nut and bolt

OD141274/2022-2023:Dismantling of existing 3.5x 25 sq mm Al cable from cable tray, disconnecting connections from panel board, rolling the same and convay to section store

OD172626/2022-2023:Dismantling of existing 2x3.5x300 sq mm or 2x3.5x240 sq mm Al cable from cable tray, disconnecting connections from existing panel board, rerouting up to COS Panel

OD146152/2022-2023:Supply and providing MS chequered plate of suitable thickness including cutting, welding, painting etc. as required for the cable trench covering.

1.17.1:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.1 x 1.5 sq. mm

1.17.2:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 1.5 sq. mm

OD170742/2022-2023:Providing 250KVA Temporary Diesel Generator Set for replacing MCCB at MSB & rearranging power cable at various floor. Including Hire and labour charges for Diesel generator set including posting of for Ist day

OD170741/2022-2023:Hire and labour charges of providing 250 KVA Diesel generator set including posting of for additional day

OD170740/2022-2023:Hire and labour charges of providing Power panel of 400 A 4 pole s incomer and 5 Nos 125A out going switches , with 3 Nos phase indication lamps on suitable size angle iron stand for Ist day

OD170739/2022-2023:Hire and labour charges of providing power panel of 400 A 4 pole s incomer and 5 Nos 125A switchs as outgoing with 3Nos phase indication lamps on suitable size angle iron stand for additional day

OD170736/2022-2023:Hire and labour charges for providing 3.5x 70 sq mm AYFY cable for Additional days.

OD170737/2022-2023:Hire and labour charges for providing 3.5x 70 sq mm AYFY cable including lying and terminating for Ist day.

OD170738/2022-2023: Hire and labour charges for providing 2X 3.5x 240 sq mm AYFY cable and including lying and terminating for Ist day.

OD170746/2022-2023: Hire and labour charges for providing 2X 3.5x 240 sq mm AYFY cable and giving connections for additional day.

OD157084/2022-2023:Supply of Following Electrical tools (1) Taparia Screw Driver 2 In 1 Model -905 - 5 Nos (2) Taparia Combination Plier Model - 1621-6 Inch - 5 Nos (3) Taparia Line Tester Model 813 - 5 Nos (4) Taparia Long Nose Plier Model 1420-6 Inch - 1 No (5) King Tony Box Set Model 4528 MR - 1 Set (6) Jinson Crimping tool-16 Inch Smrt - 1No

OD176456/2022-2023:Panel board dismantling work (150 cmx150 cmx30cm panel) from old block electrical control room after disconnecting end termination, cutting angler iron frames, removing foundation bolts , ISM Channels etc and convey the same to section store

OD157087/2022-2023:Supply , Fixing ,testing and commissioning of Microprocessor controlled power factor controller with 1-phase measurement system 8 stup Power Factor Controller BLR-CX or equivalent make

OD157449/2022-2023:Supply of Electrical safety hand Glows 2.9mm minimum thickness,withstanding 26 KV protection made by Natural Latex, off white colour ( Certification shall be attached)

OD157609/2022-2023:Aluminium anodised semi oval type legend plate with inscription of ON/ OFF/ FORWARD/ REVERSE/ START/ STOP/ UP/ DOWN/ R PHASE/ Y PHASE/ B PHASE/ TRIP/ OPEN/ CLOSE/ LEFT/ RIGHT/ MOTOR ON/ MOTOR OFF/ ACCEPT/ RETRACT/ RESET/ EMERGENCY/ EMERGENCY ON/ EMERGENCY OFF/ PUMP RUNNING/ PUMP OFF/ EMERGENCY STOP/ SLOW/ FAST or other inscriptions directed.

OD157610/2022-2023:Supply and providing 2.5mm thick Elastomeric fire retardent insulating mat as per IS 15652/2006 to withstand 11 KV dielectric strength including fixing with suitable synthetic adhesive,

OD157621/2022-2023:Aluminium anodised Danger Notice Board of size 200x150mm. with inscriptions ( both in English and Malayalam) and conventional Skull and Bone in Red colour.

1.10.3:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C

1.25:Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

90.3.19.3:Supply conveyance, installation, testing and commissioning the light fittings of following types made from CRCA sheet 0.5mm thickness with all accessories and lamps directly on wall and giving connections with 16/0.20 mm 3 core PVC insulated and sheathed round copper conductor flex wire or extending the original wiring and giving connections as required1200 mm 1X20W LED Lamp with box type fixture

90.3.21.3:Supply & installation of light fittings on 'C/U' shaped flat iron bracket Supply, conveyance, installation, testing and commissioning the light fittings of following types made from 0.5mm CRCA sheet complete with all accessories and lamps etc. directly on wall using 2 nos. 'C/U' brackets made from 20 x 3 mm MS flat, painting the flat iron bracket and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connection etc. as required.1200 mm 1X20W LED Lamp with box type fixture

90.4.5.4:Supply, Installation, testing and commissioning of ceiling fan of following sizes including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. 1200mm sweep - ceiling fan complete with service value minimum 4.0(cub meter/minute/Watt), Air delivery minimum 210(cubic meter/minute), Copper winding suitable for 230V/240V single phase AC supply

90.15.4.2:Supply Conveyance, installation, testing and commissioning of 36/40W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

90.16.2.3:Supply and laying of the following sizes of B class GI pipe laid 0.6 m below ground level including excavating trench of suitable size and refilling etc, as required.32 mm dia G.I pipe ( medium class)

OD157855/2022-2023:Preparation of Electrical Schematic Diagram in A3 plain sheet in original for submitting electrical inspectorate (data attatched)

OD157856/2022-2023:Preparation of Electrical Schematic diagram in A3 plain sheet in original for submitting Electrical inspectorate (Additional Sheet)

90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

OD201391/2022-2023:Supplying and fixing of exhaust piping of following dia. 200mm dia welded heavy class M S pipe suitable for the DG set conforming to IS: 3589/IS: 1239 cut to required lengths and installed with necessary bends,flanges, reducers, supports and clamps, anti-vibration mountings, insulation of exhaust system with 75 mm thick, 48 kg / cu.m density fibre glass / Rock wool, 50 mm thick wire mesh and aluminium cladding etc., as required as per specifications and as per the back pressure calculations.

OD201402/2022-2023:Supplying and fixing of exhaust piping of following dia. 150mm dia welded heavy class M S pipe suitable for the DG set conforming to IS: 3589/IS: 1239 cut to required lengths and installed with necessary bends,flanges, reducers, supports and clamps, anti-vibration mountings, insulation of exhaust system with 75 mm thick, 48 kg / cu.m density fibre glass / Rock wool, 50 mm thick wire mesh and aluminium cladding etc., as required as per specifications and as per the back pressure calculations.

OD173202/2022-2023:Muffler Cladding of Exhaust System-Supplying and providing Muffler Cladding of the 500 KVA DG set by wrapping 50 mm minaral wool around the pipe,fixing it firmly with in the pipe using chicken mesh, applying over all coating to the system using .040 mm thick aluminium sheet and make it air tight to ensure sound and thermal proof to the system.

14.1:Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres.

14.7:Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required.

OD174525/2022-2023:Dismantling of the existing damaged Class C Heavy Duty MS pipe of size 150mm dia with all accessories , Loading and Unloading , convey the same to section office/concerned store.

OD174534/2022-2023:Acoustic fome (gum) :- Supply , fixing and replacing necessary quantity noise reduction form for existing 500KVA DG canopy

OD174535/2022-2023:Supply and replacing of 500KVA DG damaged acoustic door Hinchess ( Door Hinches 300 x4 Nos ) , including fabrication and materials charge

OD174536/2022-2023:500KVA DG Engine & alternator painting :- Scraping,cleaning and painting whole part of 500KVA DG Engine & alternator with two coats of synthetic enamel paint over a coat of red oxide primer after disconnecting the electric supply, dismantling the power cable , meters etc from the existing Generator. Including refitting the dismantled items in position , checking and tightening all connections etc and giving connection.

OD174537/2022-2023:Acoustic Patch work & Putty work : - Checking all part of 1 nos 500KVA DG acoustic , removing damaged / corrode part of acoustic at varies place and provided patch work at damaged place of acoustic as per direction of department engineers at site.

OD174539/2022-2023:Scraping,cleaning and painting whole acoustic part & Panel board of 500KVA DG with two coats of synthetic enamel paint over a coat of red oxide primer (Including sticker work) after disconnecting the electric supply, dismantling the power cable , outgoing switches ,handle , meters etc from the existing main panel board and Generator. Including refitting the dismantled switches and accessories in position , checking and tightening all connections etc and giving connection.

OD176795/2022-2023:Painting letters or figures of the following sizes with enamel paint as identification mark to SB, DB, panel board etc as required 2.5 cm, 4 cm, 5 cm height

SOUBHAGYA ENGINEERING COMPANY

National Engineering Company

Bidder Name

Safiyulla K. V.

SOUBHAGYA ENGINEERING COMPANY

National Engineering Company