GE/SMB/T-35/2024-25/E8 REPAIR OF JOINERY AND CONNECTED ITEMS IN ZONEI AT MIL STN SAMBA

Amount

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 square metre each, including cutting holes for taking out hold fasts of dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish sing PCC 1:2:4 or cement plaster 1:4 without any extra cost to Govt ), complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exc 1.5 sqm not exceeding 4 square metre each, including cutting holes for taking out hold fasts of dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish with PCC 1:2:4 or cement plaster 1:4, complete all as specified and directed.

Taking down shutter of any description exc 1.00 Sqm but not exc. 2.0 sqm each and removing to store, complete all as specified and directed.

Taking down shutter of any description exc. 2.0 sqm each and removing to store, complete all as specified and directed.

M&L for brick work with sub class 'B' burnt bricks straight or curved on plan exc. 6 m mean radius bult in CM 1:6 INCLUDING Demolition of brick work or stone masonry, built in cement mortar incl all quoins, arches pillars etc complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:4 on fair/unfair faces of brick work or concrete surfaces finished fair & even without using extra cement complete all as specified and directed.

M&L for 10 mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 and finished even and smooth without using extra cement, complete all as specified and directed.

M&L rendering 10mm thick in CM 1:4 on fair/unfair faces of brick work or concrete surfaces finished fair & even without using extra cement including small patches jambs & soffits and cills of door/window openings Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified and as directed .

M&L for 10 mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 and finished even and smooth including small patches jambs soffits and cills of door/window opening without using extra cement, including Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified and directed.

Material ad labour for preparation of new plastered surfaces of walls & applying two coats of oil bound distemper including smoothing of plastered surface by applying wall care putty and one coat of primer complete all as specified and directed.

M&L for two coats of cement based paints incl preparation to newly plastered surfaces of walls etc complete all as specified and directed.

S&F Pressed steel frames 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S&F Pressed steel frames 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S&F for 2nd class hard wood 35mm thick factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed.

35 mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and directed.

M&L for anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat forfixing etc. complete all as specified, complete all as specified and directed.

M&L for anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections Weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm Plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specifications and drawing including making good to disturbed surface of walls, complete all as specified and directed.

Factory made solid panel PVC door shutter Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

M&L for factory made steel windows double shutter box type, outer frame made out of ERW TUBE 'P' section (60x45x25mm) and shutters of ERW TUBE 'P' section (50x35x20mm) operable shutters side hung includding pistol hinges with two Nos of MS Tower bolts 150mm size on each shutter steel handle and stopper of 'Z' section with 10mm squar guard bars devetailed or welded ready for glass fixing and wire gauzed fixing with suitabel fittings/openning for cooler/AC where required .Steel windows will be double shutter external glazed and internal wire gauzed complete all as specifed and as per Drg No CEPZ/TD-354/07 1/3 to 3/3 complete all as specified and directed. NOTE: The quoted rate against the above item shall also include (i) 04 Nos MS Steel lugs of 20x5mm MS flat 20cm long over all welded to frames (ii) PCC block for embedding lugswith and including making good jambs sofits and cills of opening with 15mm thick cement mortar 1:4 and fixing of holdfast with PCC 1:3:6 where ever required

S&F aluminium anodised Hasp and stapple 100 mm size complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repairs Stainless steel grade wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M &L for Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

S&F Sheet glass 3mm th ordinary quality , n.exc 0.50 sqm fixed to metal frame with oil putty or wooden beading / fixed in Aluminium frame as per requirement in each pane complete all as specified and directed.

S&F Sheet glass 4mm th ordinary quality , n.exc 0.50 sqm fixed to metal frame with oil putty or wooden beading in each pane complete all as specified and directed.

S&F figured sheet glass , ordinary quality 4.00 mm thk and glazing with oil putty in square not exceeding 0.5 sq m in each pain complete all as specified and directed.

S&F in repairs Double action floor spring hydraulically regulated made aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fix, complete all as specified and directed.

S&F in repairs Aluminium(extruded section) door closer hydraulically regulated designation no-3 , universal type , suitable foor door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed in repairs complete all as specified and directed.

S&F Aluminium tower bolt 200 mm long anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F in Repair Aluminium tower bolt 200 mm long anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F fixed in repairs 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor over all length of cover plate 80 mm complete all as specified and directed

S&F Butt hinges 100 mm extruded alu minium alloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed.

S&F 300mm, MS ordinary' door spring plate type incl roller and roller plate complete all as specified and directed.

S&F in repairs 300mm, MS ordinary' door spring plate type incl roller and roller plate complete all as specified and directed.

M&L for Two coats of synthetic enamal paint over a coat of pink primer on wood/wood based surfaces over 10cm width or girth incl preparation of new surfaces, complete all as specified and directed.

M&L for preparation of new or previously untreated surface of steel or iron surfaces of any description over 10cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F in repairs including dismantling of old member and providing factory made 16 mm ((+) or (-) 1 mm) thick HDHMR high density board as cupboard shutter /shelvescomplete as per manufacturer's instruction individual member will be measured for payment purpose complete all as specified and directed.

S&F 30 / 40 mm flaps width continuous (paino) hinges mild steel brass bright finished or electrogalvanised, complete all as specified and directed.

S&F in Aluminium tower bolt 75 mm long anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F in repairs including taking old and providing 20mm outer dia plainchromium plated (SS Finish) decorative drapery rod of thickness 20 gauge and including side end cap with stainless brackets near to ends with stainless steel finish for at both ends. complete all as specified and directed.

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars (MS Flat), barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified of design and complete all as specified and directed. Guard bars to be fixed in brick work wiht hold fast embedded in PCC including dismantling of old existing.

M&L for PCC 1:3:6 type B-0using 12.5 mm graded crushed stone aggregate as in hold fast /back filling of chowkhat complete all as specified and directed.

M&L for anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

Welding in repairs exc 2.5cm n exc 5cm in length thickness of metal n exc 6 mm thick complete all as specified and as directed.

S&F aluminium handle 150mm long cast type anodised complete all as specified and directed

S&F in repairs aluminium handle 150mm long cast type anodised complete all as specified and directed

S&F aluminium handle 100mm long cast type anodised complete all as specified and directed

Note:- The contract sum shall be arrived at after deduction of amount of Sch of credit.

THAKUR BUILDERS AND CO (BID ID -3127024)

SIDDAHANT ENTERPRISES (BID ID -3116580)