Construction of Govt Ayurvedic Dispensary Building at Bijepur under Khariar Block in the District of Nuapada

Earthwork in stoney earth and gravel mixed with stone boulders not exceeding .014cum in volume with initial lead and lift including rough dressing and breaking clods upto 5cm to 7cm size and laying in layers each layer not exceeding 0.3m in depth etc. complete.

Boundary Wall

Supplying filling in foundation and plinth with sand including watering ramming, cost, conveyance, royalties and all taxes of materials and cost of labour with T&P required for the work etc. complete (measurement will be taken on finished section only etc.complete as directed by the Engineer-in-charge.

Boundary Wall

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement as per MORD technical Specification Clause 301 and direction of the Engineer in Charge

Cement concrete (1:3:6 ) in foundation and plinth below the base course of terrazzo flooring using 4cm (1 1/2") size black hard hand broken granite stone metals of approved quality from approved quarry including lowering laying concrete watering and curing etc. complete to required levels laid in layers not exceeding 0'-6" thick inlcuding cost, conveyance, royalties and all taxes of all materials and cost of all labour with T & P required for the work complete.

Ground Floor

Boundary Wall

Brick masonary in cement mortar (1:6) using K.B.Bricks / Cement flyash of size 10" x 5" x 3" having crushing strength not lessthan 75 Kg/Cm2 after immersing the bricks for six hours in water before use in Foundation and plinth in all florrs with all necessary projection, cutting mlulding, corbelling, champering, watering and curing including cost conveyance, royalties and taxes of all materials and labour T&P required for the work etc.complete as per the direction of Engineer in Charge.

Ground Floor

Boundary Wall

R.C.C.work of M-25 having a minimum comprresive strength (in work test) 250 kg/Cm2 in 15 cm cubes at 28 days after mixing and test conducted in accordance with IS 456 and IS 516 using 12mm size black hard crusher broken granite chips including hoisting,lowering laying and compacting concrete by using vibrator with watering and curing for 28 days centering and shuttering and finishing the exposed surface smooth providing grooves or beds whereever necessay including cost conveyance,royalties and all taxes of all materials and cost of all labour with T&P required for the work etc.complete in all respect but excluding cost of M.S.Rods or Tor Steel and binding wires and labour charge for bending binding and tying the grills etc.complete in all respect as per direction of Engineer-in-charge.

Column base and footing

Ground Floor

Boundary Wall

Plinth Bend/Grade Beam

Ground Floor

Boundary Wall

Bed Block

Ground Floor

Lintel

Ground Floor

Column in Superstucture

Ground Floor

1st Floor

Boundary Wall

Wall Beam & T Beam

Ground Floor

Boundary Wall

1st Floor

Stair Case

Ground Floor

Chajja & Fin

Ground Floor

1st Floor

Shelves

Ground Floor

Roof Slab

Ground Floor

1st Floor

Providing HYSD bar reinforcement for R.C.C. work including Straightening, cutting, bending, binding, welding, tying the grills, laying and placing in proper position as per approved design and drawing including cost, conveyance of 18 to 20 gauge binding wire cost and conveyance of HYSD bars complete in all respect as per specification for road & Bridge and direction of Eng - in Charge.

Ground Floor

1st Floor

Boundary Wall

Brick masonary in cement mortar (1:6) using /Cement flyash Bricks of size 10" x 5" x 3" having crushing strength not lessthan 75 Kg/Cm2 after immersing the bricks for six hours in water before use in superstructure in all florrs with all necessary projection, cutting mlulding, corbelling, champering, watering and curing including cost conveyance, royalties and taxes of all materials and labour T&P required for the work etc.complete as per the direction of Engineer in Charge.

Ground Floor

1st Floor

Boundary Wall

12mm(1/2") thick cement plaster (1:6) in finished smooth to outside smooth surface of brick walls afrer racking out joints including watering and curing etc.complete with cost,conveyance royalties,all taxes and cost of all materials and cost of all labour with T&P requred for the work complete. as per the direction of Engineer in Charge.

Ground Floor

1st Floor

Boundary Wall

16mm(5/8") thick cement plaster (1:6)in finished smooth to inside smooth surface of brick walls afrer racking out joints including watering and curing etc.complete with cost,conveyance royalties,all taxes and cost of all materials and cost of all labour with T&P requred for the work complete. as per the direction of Engineer in Charge.

Ground Floor

1st Floor

Boundary Wall

20mm thick cement plaster (1:6)in finished smooth to inside smooth surface of brick walls afrer racking out joints including watering and curing etc.complete with cost,conveyance royalties,all taxes and cost of all materials and cost of all labour with T&P requred for the work complete. as per the direction of Engineer in Charge.

Ground Floor

Boundary Wall

20mm thick cement plaster in C.M. ( 1:4) for Grading plaster with all cost conveyance etc. complete.

Ground Floor

1st Floor

Supplying fitting and fixing of UPVC door of approved make with 6 mm thick glass of approved qualiy complete with frame shutters and all fitting and fixtures.Rate as per lt No 16100 dt-08.05.18 of EIC Civil Nirman Soudha

Ground Floor

1st Floor

Supplying fitting and fixing of Two track UPVC sliding window of approved make with 6 mm thick glass of approved qualiy complete with frame shutters and all fitting and fixtures.

Ground Floor

1st Floor

Supplying,fitting and fixing of M.S. doors, windows and iron grill gate made out of (45x45x60)mm size angular frame with square bar M.S. flat for grills of approved design icluding all cost conveyance taxes etc. complete. ( Prevaling lowest local market rate and excluding labour for fixing )

Ground Floor

1st Floor

Boundary Wall

Fixing vetrified tiles in floors,treads and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile.

Ground Floor

Fixing Vetrified tiles in dados,skirting and in rises of steps on 12mm thick bed of cement plaster (1:3) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile.

Ground Floor

Supplying, fitting afixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes of all materials labour, T&P etc. required for the complete in all respect.

Ground Floor

Finishing two coat wall surface with acrylic wall putty finished smooth to exposed new plastered surface including cost of all materials etc.complete.

Ground Floor

1st Floor

Finishing wall surface with two coats of approved quality of weather seal coat of approved shade over a coat of primer including cost of all materials etc.complete.

Ground Floor

1st Floor

Boundary Wall

Providing and Applying two coat of Plastic emulsion paint of approved shade including cost of Plastic emulsion paint including all etc complete.

Ground Floor

1st Floor

Painting two coats with approved paint over a coat of primer Including cost of all materials etc. complete.

Ground Floor

1st Floor

Cement Concrete (1:2:4) with 12mm size hard granite chips including hoisting and laying etc.complete.

Ground Floor

Earthwork in hard soil with initial lead and lift including rough dressing and breaking clods upto 5cm to 7cm size and laying in layers each layer not exceeding 0.3m in depth etc. complete. ( By Mechanical means )

Ground Floor

Labour for fixing GCI sheets in roof including fixing of ridges and wind ties etc. complete but excluding cost of fitting

Ground Floor

Providing and applying of post construction Anti-termite treatment by drilling 12mm dia holes at distance of 30cm @ junction of wall and floor about 300mm aprt deep enough to reach the soil below and chemical emulsion (PREMISE, IMIDACHLOPRIED30.5 SC OF BAYER MAKE MIXED WITH 47.5 Ltr. WATER) pump these holes to soak the soil @1 ltr. Solution of each hole as per manufactures’ specification and the holes should be pluged with filling materials including coat of all materials, labour conveyance and hiring charges of machineries all taxes as per direction of EIC.

PH WORKS

Supplying all materials,labour,T&P and fitting & fixing of 4.0 kgf/cm2 U-PVC soil waste ventilating pipes and fitting of the following O.D conforming to ISI No.13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenche including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including tasting and refilling and trenches as per direction of E.I.C.(a)110mm dia.U-PVC SWR pipes

110mm dia.U-PVC P-trap

110mm dia.U-PVC SWR Double junction door

110mm dia.U-PVC SWR door Bend

110mm dia.U-PVC SWR Offset

110mm dia.U-PVC SWR Plain Bend

110mm dia.U-PVC SWR Vent cowl

125mm dia CP greatings

75mm dia.U-PVC SWR pipes

75mm dia.PVC SWR plain bend

75mm dia.PVC SWR door bend

Supplying all materials,labour,T&P cutting holes through brick/stone masonry works including making good the damages in cm(1:4)for taking HCI/PVC pipe & fitting etc. all complete as per PH specification and direction of E.I.C.(a)250mm thick wall

Roof Cutting

Supplying all materials,labour,T&P and fixing wash down water closet(E.W.C)with integral 'S' or 'P' trap to the floor with wooden plug and CP screw including jointing the trap with soil waste pipe in cm(1:1)etc all complete as per specification and direction of the E.I.C.(a)EWC with ‘P’ & ‘S’ trap plain (Nycer/Cera/Hindware/Parryware)

Supplying all materials,labour,T&P and fixing of plastic seat cover for EWC with chromium plated brass hinges and rubber buffer etc all complete as per specification and direction of the E.I.C.

Supplying all materials,labour,T&P and fixing wash basin with hole for pillar taps with cast iron or M.S. brackets painted white including cutting holes in walls and good the damages etc. all complete as per specification and direction E.I.C.(a)550mmx400mm size WHB(Neycer/Parrywear/Cerra/Hindware)

supplying all labour,T&P materials & fixing wash Kitcken Sink with CI/MS Brackets painted white including holes in walls and making good the damages etc. all complete as per PH specification and direction of E.I.C(a)600mmx450mmx200mm Steel sink with 40mm dia c.p. west,west pipe and brackets.

Supplying all materials,labour,T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specifications and direction of E.I.C.Soap holder

Supplying all materials,labour,T&P and fixing mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the E.I.C. (a)600mmx450mm Mirror

Supplying all materials,labour T&P and fixing standard size glass shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per PH specification and direction of E.I.C.a)(125x600)mm size glass-shelf

Supplying all materials,labour,T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of E.I.C.(a)CP towel rail

CP Towel Ring

Supplying all materials,labour T&P and fitting and fixing 10 Ltrs capacity PVC LL flushing cistern with a pair of CI/MS brackets complete with fittings such as syphonic arrangement,15mm nominal size brass/PVC ball valve with polythene float,CP/Brass handle,unions and couplings for connection with inlet,outlet,over flow pipes,32mm dia PVC flushbend,15mm dia PVC connection pipes including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main with etc all complete as per specification and direction of the E.I.C. (a)10 lit PVC L/L Cistern(Parry ware)

Providing fitting fixing Al door with anodized Al door section of 9202 as vertical member, 9201 as top, 9200 as bottom and middle member with frame section as 9221 with tapered clip no 4660 and frame to be completed by means of jointing angle no 1855 including cost of labour T&P hire charges of drilling machine labour charges etc complete with cost of laminated board. and as per direction of the Engineer in charge.

Supplying all materials,labour,T&P and fixing porcelain glazed tiles in floors, on 25mm thick bed of cm(1:1) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. all complete as per specification and direction of the E.I.C.

Supplying all materials,labour,T&P and fixing porcelain glazed tiles in dados/skirtings on 12mm thick CP(1:3)joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing etc. all complete as per direction of the E.I.C.

Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the E.I.C.Initial lift up to 1.50m

From 1.5m to 3.00m depth

Supplying all materials labour T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to work sitepayment of royalty taxes etc all complete as per direction of E.I.C.

Supplying all materials,labour,T&P and providing cc(1:3:6) with 4cm size hard granite metal including watering,curing,conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per specification and direction of the E.I.C

Supplying all materials,labour,T&P and providing cc(1:1.5:3)with 12mm size HG chips including watering,curing and conveyance of all materials to work site,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials labour T&P and providing brickwork with KB bricks having crushing strength not less than 75kg/cm2 with dimensional tolerance +/-8% including watering,curing conveyance all materials to worksite payment of royality taxes etc. all complete as per specification direction of E.I.C. KB Brickwork in cm(1:4) F&P

Supplying all materials,labour,T&P and providing cement plaster on brick/stone work including watering, curring and conveyance of all materials to work site,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C.12mm thick CP in cm(1:3)

skirting including watering,curing, conveyance of all materials to worksite,payment of royality,taxes etc. all complete as per specification and direction of E.I.C.

Supplying all materials labour T&P and providing rigid and smooth centering & shuttering for RCC works including falsework and dismantling them after casting including conveyance of all materials to worksite, payment of royality,taxes etc. all complete as per specification and direction of E.I.C.

Supplying all materials labour T&P and providing MS reinforcement for RCC works including cutting, bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,conveyance of all materials to worksite,payment of royality,taxes etc. all complete as per specification and direction of E.I.C.

Supplying all materials labour T&P and providing RCC(1:1.5:3)using 12mm hg chips for RCC works including hoisting,laying,watering,curing,conveyance of all materials to work site,payment of royality, taxes etc. all complete as per specification and direction of E.I.C.

Supplying all materials,labour,T&P and providing 110mm dia PVC Tee inside the septic tank including cutting holes and duly embeded in cc(1:1.5:3)using 12mm size HG chips fitted and fixed in position and mending good the damages etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials labour T&P and Providing cement flush pointing(1:3) to brick masonary including watering,curing,conveyance of all materials to work site etc. all complete as per specification and direction of E.I.C.

Supplying all materials,labour,T&P and filling Foundation and Plinth with excavated earth including watering, ramming etc all complete as per direction of the E.I.C.

Supplying all materials,labour,T&P and constructing inspection chamber of the following sizes with cc(1:3:6)using 40mm size hg metal on bed,1st class KB Brickwork in cm(1:6)moulding and shaping the channel inside and benching with cc(1:1.5:3)using 12mm size hg chips,12mm thick CP(1:3)with punning to inside,cement flushpointing(1:3)to outside,RCC cover slab in cc(1:1.5:3)using 12mm size h.g. chips with RCC man hole cover,e.w. in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,conveyance of all materials to site,payment of royality,taxes etc. all complete as per approved specification and direction of E.I.C.(a)Inside size500mm x500mm x 460mm

Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C. precast cover slab in c.c(1:1.5:3) using 12mm size h.g. chips, foundation concrete (1:3:6) using 40mm size thick h.g.metal on bed and arround trap, K.B. brick in c.m.(1:6) in foundation and plinth and inside 12mm thick c.p. (1:3) finished with a floating coat of neat cement including fixing 100mm size H.C.I. gully trap and grating etc. all complete as per approved drawing specification and direction of EIC. Inside size ( 250 x 250 )mm

Supplying all materials, labour, T&P and laying in trenches PVC SWR soil waste ventilating pipes for sewer line of following dia in trenches (to slope or level)and jointing with supply of approved solvent cement by non-heat application method C.C (1:3:6) using 40mm size hard granite metal on bed of the trenches and all round concrete encashing with C:C (1:4:8) using 40 mm size H.G. metal, earthwork in excavation in trenches in all kinds of soil, refilling the same in a layer of 0.30mtr with watering, ramming and removing of surplus earth, testing the S.W. pipeline etc. all complete as per approved drawing, specification and direction of the E.I.C(a)110mm dia PVC pipe Line Haunch top .

Supplying all materials,labour,T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class KB brick work in cm(1:6)for the remaining height at top,12mm thick CP(1:4)inside and outside over masonry brick work gravel packing in the rear of well steining,RCC cover slab in cc(1:1.5:3)using 12mm HG chips,fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works,watering,curing,conveyance of all materials to work site,payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C.(a)Soak way Pit 1.00m dia x 2.00m Deep

Supplying all materials, labour, T&P and construction of masonry staging with providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx2.60m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod etc watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.(a)1000 lits capacity on the roof of 1st floor

Supplying all material,labour,T&P and Fitting and Fixing of Rotational moulded polythene cylindrical vertical water storage tank conforming to IS:15701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts,including hoisting upto a height of 5mtr above GL & placing the tank in required position including conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per PH specification and direction of the E.I.C.(a)1000 lits capacity on the roof of 1st floor

Supplying all materials,labour,T&P and providing&fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D-1785/89(sch-80)and pipe fittings of the nominal bore with clamps including making good the wall,ceiling and floor all complete as per specification and direction of E.I.C.(a)25mm Outer dia C-PVC Pipe(Internal)

25mm dia U-PVC Pipe(External)

Supplying all materials,labour,T&P and cutting holes for taking G.I/PVC pipes and making good the damages as per the direction of E.I.C.a)In Ground Floor

Supplying all materials,labour,T&P and cutting holes in RCC,floors,roof,etc.upto 19cm thick for passing GI/PVC pipes and fitting etc. and repairing the holes after insertion of pipes etc. with cc(1:2:4)including finishing complete so as to make it leak proof as per direction of E.I.C.(a)In Ground Floor

Supplying all materials,labour,T&P and cutting grooves in pucca floor and walls for taking G.I/PVC pipes and making good the damages as per the direction of E.I.C.a)In Ground Floor

Supplying all materials,labour,T&P and fixing brass/CP fittings of thefollowing nominal bore with supply of all jointing materials complete as per specification and direction of E.I.C. (Jaguar/hindware /parrywareequivalent )(b)15mm dia CP(LB) Bib cock ( Out Side 1 Num)

15mm dia CP Two way Bib cock

15mm dia CP bib cock with Elbow action(Plaza/ Amber)

15mm dia CP Angle stop cock

15mm dia CP Pillar stop cock

15mm dia Health Faucet & 1.0m long Flexible pipe

25mm dia PVC F.W.V.

15mm dia CP Flange

1.00HP Single Phase Submersible Pump Set

Supplying all materials,labour,T&P and fitting and fixing of ISI mark 1.0HP single phase vertical water cool submersible pump set with discharge 1800/2200Lit/Hour & a head-55/70mtr.of reputed make(CRI/ KSB/Texmoor Equivelent) Including cost conveyance and taxes etc. all completes as per P.H. Specification and direction of E.I.C.

Supplying all materials,labour,T&P and fitting&fixing of 1.0HP single phase vertical submersible pump set with commissioning and testing etc. all completes as per P.H. Specification and direction of E.I.C.

Supplying all materials,labour,T&P and fitting & fixing of ISI mark DOL starter of reputed make like BCH or equivalent for 1.0HP single phase vertical submersible pump set including all cost conveyance & taxes etc. all completes as per P.H. Specification and direction of E.I.C.

Supplying all materials,labour,T&P and fitting & fixing of (2.5mm)2 3core copper flat suitable cable having ISI mark of reputed company like BCH/Finolex or equivalent & connecting the pump starter including cost conveyance & taxes etc. all completes as per P.H. Specification and direction of E.I.C.

Supplying fitting and fixing of plastic rope MS well cover,MS clamp,stainless steel short piece,bend & socket including all cost,taxes etc all complete as perdirection of the E.I.C.

Supplying fitting and fixing of HDPE Pipes & pipe fittings with making connection to pump set including all cost conveyance and taxes etc all complete as per direction of the E.I.C.

Earthwork in all kinds of soil in excavation of foundation trenches within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C.

Supplying all materials, labour ,T&P and laying in trenches HDPE of the following nominal bore and pipe fittings including testing etc all complete as per direction of the E.I.C.

150mmx125mm Size Bore Well Through DTH Method:-

Labour for drilling a perfectly vertical bore hole of specified dia for a specifieddepth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs (650 cfm/200 psi) as required to suit the site condition as per the direction of Engineer-in-Charge including use of own rigs with its accessories, tools and plant and consumables etc for lowering of 150 mm dia PVC/GI pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and houlder formation(GI/PVC casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the tube well). Withdrawing after completion of the tube well(a)Drilling of 150mm. dia. Bore-0.00mtr to 30.00mtr

Drilling 125mm dia. Bore-30.00mtr to 60.00mtr And Above

Lowering the following size G.I/ PVC pipes with or without slotted pipes as per the necessity from ground level and fitted and fixed up in perfectly vertical position, including cutting and threading pipe and slotted pipe and supplying and fixing all jointing materials, tools and plant etc. complete and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above.(a)Lowring of 125mm dia pipes-0.00mtr to 29.40mtr

Cost of 125mm dia PVC casing pipes-0.00m to 30.00m

Cleaning and developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of Engineer-in-Charge.

Supplying all materials and labour, tools and plant and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5 mtrs below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied by the Department)

Supplying all materials , labour , T&P and providing , fitting and fixing of I. M. - II hand pump complete with accessories and along with 8nos of riser pipes of 32mm dia nominal bore hot dip galvanised screwed and socked, fitted with socked made of seamless or machine from solid bar socked fitted at one end and thread protector at the other end with 8nos of 12mm dia connecting rod made of bright bar electrogalvanised fitted with coupler and fitted with stand assembly suitable for use in bore well etc all complete as per direction of EIC.

Supplying all materials, labour, T&P and construction of circular Tube well platform(1.80m dia) with c.c. (1:3:6) using 40mm size h.g. metal on bed and providing c.c. (1:2:4) using 12mm size around the casing pipe with circular parapet of platform with foot rest with earth work excavation in all kinds of soil as per UNICEF drawing and design etc all complete as per specification and direction of EIC.

Supplying all materials, labour, T&P and construction of drain as per UNICEF etc all complete as per specification and direction of EIC.

EI Works

Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard )

Group-A

Group-B

Group-C

Recessed wiring to Fan Point in

Group B

Recessed wiring to call Bell Point in

Recessed wiring to Exhaust Fan Point in…..

S/F of Angle holder replacing Ceilling Rose (1.29-1.28

S/F of fan hook 'S' type made of 16 mm MS rod for fixing in the Existing RCC Roof.

S/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board (1.25.1+1.25.4)

S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano type modular switch, connection, painting etc as required.

S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required

S/F of Power point with 4 modular & 2 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket & Mini DP MCB, connection, painting etc as required for AC

S/F of computer board consisting of 3 nos of 5amp modular plug and modular switch & 1 no of Mini MCB complete with wiring on 12 modular M.S. box with modular cover.

S/F of 1 no of 5 pin 15/16 amp. Socket , 1 no of switch & 1 no of 15/16A top with modular mini MCB, in 6 modular box with cover with connection, painting etc as required for Inverter connection

S/F of 18 SWG metal box of following sizes (Nominal size) in recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recessed conduit as required.

2 Modular box with base & cover

4 Modular box with base & cover

12 Modular box with base & cover

Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard)

Inverter wiring (1x1.5smm) Copper wire (1.19.1)

S/F of 'B/C/D' series SP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP) (2.6.1)

S/F of 'B/C/D' series DP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the 2 Way single door MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required (DP)+(2.3.1b)

Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.)

S/F of MCB 2 way Single door (2.3.1 (b)

S/F of MCB 6 way Single door (2.3.1(a) + 2.3.1(b))

Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.)

S/F of 63A ICDP main switch with MS box of 250mmx300mmx60mm deep ( (2.15A)+(1.24.16)

Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2)

Supply & laying 6 SWG G.I. wire in recess for loop earthing as required (3.17)

Providing & fixing plain 16/0.2mm twin twisted flexible, FR PVC insulated copper cable in polythene sleeve or conduit of suitable size on the floor/wall or side of the table/door etc as required.(1.31)

S/F of 300 Exhaust fan with all accessoriesand connections (Make Usha-Aero Clean Plus DBB/ Polycab-Fresh on DBB/ Cropmton-Trans Air12" reversible/ Havells-Ventil Air DS(HS)/ Anchor-Anmol Delus R/ Orient-Power Flow DBB)

S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30)

S/F of 18-25 wt. LED single strip tube. Light fittingwith all accessories & connection (make Havels/HPL/Crompton/Polycab/PAC)

Supply of 1200mm A.C. Ceiling fan with all accessories and connections with out fan regulator (Make:Usha-Striker Neo HS/Pollycab-vital HS/Crompton-HS/Anchor-Turbo speed star/Havells-Samrat ES /Orient-Summer Bridge Pro/Great white -ALDOUS)

Fixing /I.T.C. of stepped type Modular regulator (1.25a)

S/F of 20mm dia down rod with all accessories (1.39+1.41)

Supply & fixing of superior type C.I bulk head fitting with 9W Led Bulb for general domestic use ISI marked square / oval type with premetallic glass cover provided with galvanized steel wire guard including necessary connections. ( M-5 )

S/F of 20-25 wt. LED St. Light fitting with LED Electronic driver with all accessories & connection( Make- Crompton/Phillips/HPL/Polycab/Havells )

S/F of 60 wt. LED St. Light fitting with LED Electronic driver with all accessories & connection( Make- Crompton/Phillips/HPL/Polycab/Havells )

S/F of electronic 12w Watt LED Bulb

SITC of Luminous tall tubular Inverter battery 2 nos 150 AH & 2000 VA, 24 V Inverter (Make- Luminous/Exide)

S/F of 6 sqmm twin core unbonded aluminium service connection wire with no.10 G.I. Guard wire to support the aluminium wire

Provision of Armoured cable size 2x6sqmm (15)

Laying of MV cable upto 25sqmm in ground (5.1.1)

Supply & Instalation of 6 meter HDG octagonal Pole (Top 70 mm & Bottom 130mm of 3 mm thick) with double arm detachable ring type Bracket suitable to hold the light fitting on 1500mm long beacket . The Base Plate (220X220X12mm) with 4 nos of plinth Foundation bolts(20 mm dia 600mm Length) to be mounted on concrete Foundation (1.5'X1.5'X4' high) usng HYSD steel reinforced for errection of Pole firmly as per direction of Engineer in Charge.

Please Enable Macros to View BoQ information