GE/KHU-15/2020-21 PROVISION OF WEAK SECTION AT LAMAYURU, PROVISION OF RAIN SHED AND SPECIAL REPAIR TO CERTAIN BLDS AT BIAMAH UNDER AGE B/R-II UNDER GE KHUMBATHANG

Amount

M & L for excavation over areas in hard / dense soil ,not exceeding 1.5 m deep and getting out complete all as specified & directed by Engr-in-Charge.

M & L for exavation over areas in hard / dense soil , exceeding 1.5 m and not exceeding 3.00 m deep and getting out complete all as specified & directed by Engr-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick with soft disintegrated rock.

Removing excavated material n. exc 50 M and depositing where directed at a level not exc1.5 M above the starting point as per directed by Engr-in-Charge.

M&L Reinforced Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) for beams , cantilevers, bressummers, lintels over 1.5 span etc all as specified and directed.

M & L for HYSD TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips etc complete all as specified and directed by Engr-in-Charge.

M&L for HYSD TMT bars 5 mm dia and over upto and including 10 mm dia in strirrups, spaces and binder and including mild steel wire (annealed) not less than 0.9mm dia etc complete all as specified and directed by Engr-in-Charge.

M & L for form work to sides and soffits of floor or roof beam, beam hauchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floors and beams etc for flat rough finished surfaces complete all as specified and directed by Engr -in Charge.

M & L for form work to edges of concrete flats, treads breaks in floors , window cills , concrete railling, opening in concrete walls, floors and roofs RCC/PCC bands floors roofs n exc 20 cm wide and sides of RCC/PCC bands in walls , horizontal or slooping and similar work exc 10 cm and not exc 20 cm wide surface finished rough complete all as specified and directed.

M & L for pre-cast cement concrete block ( Type C-1 1:3:6 , 20 mm graded agg) masonry with solid blocks exc. 10 cm in width and setting in mortar 1:4 , complete all as specified and directed.

Dismantling, wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets.

Dismantling timber in fillets, rails, posts, rafters, purlins etc under 40 Sq cm in section in any position unframed work complete.

M&L second class soft wood, plain fillets, square or rectangular in section of area exc 13 and n exc 25 Sqcm, clean sawn, secured with nails or brads.

M&L second class soft wood, plain fillets, square or rectangular in section of area exc 6 and n exc 13 Sqcm, clean sawn, secured with nails or brads.

M&L second class soft wood, bull nosed, splayed, chamfered or rounded on one edge or face n exc 3 Sqcm sectional area

M&L 9 mm thick, prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work as in ceiling.

M&L 12 mm thick, prelaminated particle board, interior grade, prelaminated one side with decorative choice laminated and other side balancing white lamination fixed with screws to timber frame work.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles, and rubbish off the premises complete all as specified and directed.

M & L for screed or bedding layer 15 mm thk in CM 1:6 finished even and fair on floors for laying floor finishes.

M& L for Chequerd cement tiles size 300mm X 300mm X 25 mm thick,set, jointed and pointed in neat cement slurry in floor with grey cement and pigments complete all as specified and directed.

S & F Virified Ceramic tiles 10 mm thick, Light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified.

S & F non skid coloured joint free ceramic tiles 7 to 8 mm thk area of each tile exc 0.06 Sqm but n exc 0.11 Sqm in floor etc set and jointed in neat cement slurry and pointed in coloured cement with pigment to match all as specified.

S&F Glazed ceramic coloured tiles printed or designer with highlighter and border concept joint free of size 300x450x7mm thick as in vertical surfaces such as dado/skirting/risers to steps etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 15 mm thick plastering in CM 1:6 complete all as specified and directed.

Taking down cement or cement plaster, any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick cement plaster on fair faces of brick work on concrete surfaces in cm (1:4) rendering to be finished even and smooth without using extra cement with WPC @ 3% by wt of cement complete all as specified and directed by Engr-in-Charge. (WPC shall be measured and paid separately under respective item)

Supply only water proofing compound complete all as specified & directed.

Material and labour for preparation of new surface decorated brick/concrete plastered or unplastered surfaces of walls, pillars, cornices by brooming down etc and applying two coat of cement base paint etc complete all as specified and directed by Engr -in Charge.

M&L for preparation of newly plastered surfaces of walls including cornices, pillasters etc, and applying two coats of oil emulsion distemper including chalk whiting preparatory to distempering complete all as specified and directed.

M&L for hard core of gauge n.exc 63mm deposited, spread and leveled in layers n.exc 15cm thick watered and rammed to a true surface with broken stone aggregate complete all as specified and directed by Engr -in Charge.

Taking down chowkats or frames with shutters (without taking off shutters from frame) n exc 1.50 Sqm each complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from frame) exc 1.50 Sqm but n.exc 4.00 Sqm each complete all as specified.

S& F powder coated anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing including powder coating etc, complete all as specified.

S&F Anodised aluminium powder coated door shutters, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles (150 mm) 02 Nos in each door, hinges (100 mm ) 03 Nos each door, anodised aluminium snap beading, screws, etc complete all as specified and directed by Engr-in-charge.

S&F Anodised aluminium powder coated window glazed/gauzed shutters,sliding type without sash bars, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, self locking system and roller arrangement with 03 Nos channels complete anodised aluminium snap beading, screws, etc complete all as specified and directed by Engr-in-charge.

S&F Anodised aluminium powder coated ventilator glazed shutters, top hung type without sash bars, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (01 Nos), hinges type B-21 100 mm long (02 Nos), suitable handle 125 mm long (01 Nos) etc complete all as specified and directed by Engr-in-charge.

S&F Aluminium alloy anodised sliding door bolt with hasp staple ( bolt type ) 250mm long , staple (bolt type) and fixing bolt with and sliding bolts of extruded sections or cast-aluminum alloy and fixed.

S&F 200 mm aluminium anodised barrel tower bolt of extruded section and fixed.

S&F Aluminium door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg, complete all as specified and directed.

S & F galvanised mild steel wire cloth 0.56mm nominal dia of wire and avg width of aparture 1.18mm complete all as specified and directed.

S&F 100 mm aluminium anodised barrel tower bolt of extruded section and fixed.

S&F 19mm dia teak wood finish curtain rod of good qaulity etc all as specified and directed.

S&F wooden brackets for wooden curtain rod of matching colour etc all as specified.

Dismantling of plain or corrugated steel sheeting, any guage, thickness, including Nainital patterns roof covering complete all as specified and directed.

S&F, 0.63mm thick, galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L type or J type or cranked bolt with washers, in roofs, walls etc, with grade of zinc coating 275 complete all as specified and directed.

S&F, 0.80mm thick, galvanised, plain mild steel sheeting in ridges, hips, valley gutters, drip and straight flashing length and girth is fixed) complete all as specified and directed.

M&L for preparation of new untreated surfaces of steel of any description , over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old painted surfaces of steel of any description , over 10 cm in width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

Demolition of cement concrete in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of precast concrete block masonry work built in Cement mortar or cement lime motar complete all as specified and directed.

M & L 75 mm thick Cement concrete work as in plinth protection type C-1 , 1:3:6 (20mm graded aggregates) with finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed by Engr -in Charge.

M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

S&F in repairs for vitreous china wash basin white flat back size 550x400mm but exclusive taps, wastes, chain and plug and porcelain stopper but including cutting for and pinning in ends of brackets or erecting stand, including waste pipe brackets fixed complete all as specified and directed.

S & F PVC waste pipe 32mm dia & 75cm long incl waste coupling fixed to waste coupling complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F CP Soap dish, approximate size 160x 160 x 90 mm complete all as specified and directed.

Dismantling water storage tanks of capacity exceeding 500 ltr and n exc 1000 ltrs each complete all as specified and directed.

S & F Rotational moulded HDPE water storage tanks 1000 Ltrs capacity ( Cylindrical vertical closed top ) hoisted and fixed in position or placed in position inside or outside the connecting up pipes and securing access covers including 20 mm dia ball brass valves high pressure with polythene float and flynut complete, screwed for iron pipes and fixed complete all as specified and directed.

S & F gun metal globe valve or gate valve for iron pipe 20mm dia & fixed complete all as specified and directed.

Taking down 15 mm bore steel tubing and connection incl cleaning for refixing or removal to store complete all as specified and directed.

S & F 15 mm bore tubing galvanised iron medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S & F 20 mm bore tubing galvanised iron medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

S&F 100 mm bore PVC (SWR) floor trap, plain with and including grating incl jointing with solvent cement complete all as specified and directed.

Taking down PVC pipes (any size) including all fittings, heads, shoes, bends etc complete all as specified and directed.

S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repairs Cardiff health faucet chromium plated , Hindware complete all as specified and directed. Make:- model of Jaguar/HINDWARE /ZIM / pariware as approved complete all as specified and directed.

S&F in repairs cromium plated 15mm bore wall mixture 3 in 1 systems with provision for bath telephonic shower and over head shower complete wth bend pipe and wall flange. Make : Hindware/Jaguar complete all as specified and directed.

S&F in repairs chromium plated angular stop cock 15mm bore , Make : Hindware/Jaguar complete all as specified and directed.

S&F in repairs chromium plated long body bib cock with wall flange 15mm dia. Make : Jaguar/ Hindware complete all as specified and directed.

S&F in repairs chromium plated central hole basin mixer without popup waste cystern with 450mm long flexible house. Make : quarter turn Cat No. F100014 of hindware or equivalent model complete all as specified and directed.

S&F in repairs chromium plated towel Rail 600mm long complete all as specified and directed.

S&F in repair Ceramic floor mounted, one piece water closets, complete set (pedestal pattern) with seat cover, concealed Flushing cistern including all fitting complete all as specified and directed. Make : Parryware/hindware or equivalent model of Hindware Parryware.

S&F 110 mm bore PVC (SWR) 'P' trap for EWC complete all as specified and directed.

Excavation in post holes(or similar holes each not exceeding 0.5 Cum getting out and removing soil and making good surface in hard dense soil complete all as specified.

M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete, etc. complete all as specified

S & F MS tubular pipes ,reactangular tubes,as in framed work,purlins rafters struts, vertical members trusses and similar works incl special shape washers etc complete using ERW or induction butt welded tubes, Framed work such as in door frame, door shuters / gate of angel or other section complete prepared for fixing of steel sheeting or other convering doors to be prepared for hanging with and including hings hold fast of Fe 410-W (Gde E-250 quality) etc complete all as specified and directed by Engr-in-Charge.

Supply and fixing 40 mm thick solid PVC sandwich panel with 2 mm plain PVC sheet on both sides suitably fixed in MS angle frame work etc complete all as speciefied and directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.5 mm thick of an colour having tensile strenght of 550 Mpa as in roof covering/chajja/cladding fixed with self tapping screw as specified and directed by Engr-in-charge.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engr-in-charge.

Material & Labour for point wiring with 1.5 sq mm (Nominal area) FRLS, PVC insulated, 1100 volt grade, multistranded copper conductor cable un-sheathed in & including PVC casing caping with fittings/accessories and PVC insulated, FRLS, 1100 volt grade un sheathed copper conductor of 1.5 sqmm size cable earth wire connected to common earth including closed recessed wooden terminal boxes of suitable size made of 2nd class hard wood for mounting of switches, sockets, fan regulators etc with 3mm thick plastic laminated sheet of Hylam/Mica make as top cover complete all as specified for the following:- (a) One light point/fan point/buzzer point Exhaust fan point controlled by one switch.

(b) One socket out let 5 Amp on independent board complete.

(c) One 3 pin socket wih 1.5 Sqmm outlet 5 Amp on same board with other switch complete

Description all as per serial item No.85 here-in-before but with cable conductor 2.5 sq mm (Nominal size) & earth wire of 2.5 sqmm for socket outlet 15 Amp on independent board complete all as specified and dirtected.

Supply and Fixing switch piano flush single pole one way (ISI marked) complete.

Supply and Fixing switch piano flush type 15 Amp single pole one way ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing socket out let multipurpose three pin 5 Amp and 2 pin 5 Amp flush type complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing socket outlet 2 in 1, three pin 5 Amp and 15 Amp flush type (multi purpose) ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing ceiling rose three phase pvc/polycarbonate, isolated body complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing lamp holder ,PVC/Polycarbonate type with back plate suitable for batten fitting (angle /plain) complete all as specified and directed by Engineer-in-Charge.

S&F in repair E-Lite LED Pride plus LED 20W for Decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack., 230volts, 50 Hz including making necessary connection prewired and making connection with 3 core copper flexible cable of appropriate size from ceiling rose/PVC connector to light fittings complete all as specified and directed. Make : Havells Cat Part No LHEXBLP7N1W020 of Havells or equivalent

S&F 42 W LED ultra modular designed architectural LED luminaire suitable for recess/ armstrong celling/ grid ceiling and POP mounting complete connection all as specified and directed Make: cat part No. LHEWDRP6PK1W042 of Havells or equivalent in Philips/crompton Greaves

S&F in repair E-LitE LED Pride plus LED 9W for Decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack., 230volts, 50 Hz including making necessary connection prewired and making connection with 3 core copper flexible cable of appropriate size from ceiling rose/PVC connector to light fittings complete all as specified and directed. Make : Havells Cat Part No LHEXBLP7IN1W009 of Havells or equivalent

Supply & fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver complete all as specified and diereted.

Supply and fix Water heater storage type, electric,capacity 25 litres. BEE 5 star rated complete all as specified and directed.

S & F in repair pressed sheet metal enclosure (MCB DB), single phase and neutral with 200 Amps rated bus bar, double door type, 8 way ,240 volts completeall as specified and directed

Supply and fixing MCB 40 Amp SPN 240 volt AC supply rupturing capacity not less than 10 KA complete all as specified and directed by Engineer-in-Charge.

Supply and fixing MCB SP 6 to 40 Amp 240 volt AC supply rupturing capacity not less than 10 KA complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm suspension wire, one twin core cable flat twin core cable or circular 10 sqmm complete all as specified and directed by Engr-in-charge

Dedcuct Credit for Demolished/Dismantled material Rs (-)15,440.00 (Minus) as listed in Schedule 'A' Part-II (Credit Schedule) Note : Tenderers will not quote against this item being a tentative amount, to be considered to arrive at the 'Contract Sum'.

M/S DEEP ENTERPRISES

M/S SK TRADERS