Colour Work on Road Side Footpath kerbing, Central verge kerbing and Central verge grills at Differant Places in Navrangpura Ward (ARC)

2. Tender Estimated Cost Rs.10,00,000.00 (exclusive of GST). GST will be paid extra by

AMC/Authority at prevailing rate to the contractor.

1% of the Tender Cost in the form (Rs.10,000.00)

3. Earnest Money

(D.D./Pay Order / Local Micr Check/B.G.)

4 Tender Fee Rs Demand Draft of Rs.900.00

6. Time-Limit 12 months

7. Validity Period 120 Days

(i) Last Date of Online

Submission of the Tender

a) In Sealed cover in duplicate copies by Registered Post

(ii) Mode of Sending A.D, or by Courier.or hand delivery

b) Tender sent by ordinary post will be rejected out

(iii) Description essential to be

a) Name of work, Tender Notice No. & Tender No.

made on sealed cover b) Date of receiving tender by Corporations.

(iv) Mode of quoting rates in

The Price bid shall be submitted online only.

Schedule of Quantities and Rates It shall not be submitted Physically.

9. Date of Opening Dt.07.03.2026 , 15:00 hrs.

Submission of EMD. Tender fee and other Documents during

Place of Submission & Opening of office hours: On date.07.03.2026 & 12:00 hrs West Zone,

10. 2nd Floor, A.M. Office, Dr. Ramanbhai Patel Bhavan,

Usmanpura.Ahmedabad Municipal Corporation, W.Z. Office,

Ahmedabad-380013.

(1) Rs.1000/- per day (for tenders amounting upto 10 Lakhs),

11. Penalty Due to Delay of work (2) Rs.2500 per day (for tenders amounting above 10 Lakhs

and upto 30 Lakhs), (3) Rs.5000 per day (for all tenders

amounting above 30 Lakhs) but not more then 10% of bill

12. Defect Liability As per ‘B-1 Form Close

Whenever a work is allotted by Engineering staff, whether

Time permitted to start parts minor or major of part thereof of any amount, the

of work contractor shall be bound to start the works within 48 hours

of intimation of work. Communication done telephonically

via SMS, Via Whatsapp and through letter / E-mail shall be

considered legal and binding for the same. Failure of comply

to start the works in 48 hours of intimation as above by

contractor the contractor shall be levied penalty of (1)

Rs.1000/- per day (for tenders amounting upto 10 Lakhs),

(2) Rs.2500 per day (for tenders amounting above 10 Lakhs

and upto 30 Lakhs), (3) Rs.5000 per day (for all tenders

amounting above 30 Lakhs). Three times failures by

contractor shall make contractor responsible to be black

listed unless and otherwise justified properly in writing /

binding within 15 days of last notice of penalty.

14. ftuLx[t¾xhlu «J<obtl GST yjd&e åþfJJtbtk ytJNu

 The staff of the contractor shall wear safety jackets,

shoes, helmets etc. while on duty and any violation will

attract a fine of Rs. 5,000/- for each incident.

15 Safety  Failure to erect safety signage or trying to carry out

the works without proper precautions/safety measures as

required will attract a fine of Rs. 5,000/- for each incident.

Contractor's Sign Addl.C.E.(west zone)

ybœtJtœ BgwÂlÂmvj ftuvtuohuNl

bntldh muJtmœl - vrùbÍtul

y.Bgw.ftu. Ítul Ítulj ytuVem,

ztuo.hbKCtE vxuj CJl, WMbtlÃþht ath hM<t vtmu, ybœtJtœ. vrùb Ítul xuLzh ltuxem

lk-08/2025-26 btk ytJhe juJtguj ftbtule ÂJd<

1. Wvhtuf< xuLzhtu su btLg hSMx[uNl ^htJ<t ftuLx[t¾xh©eytuyu ztWljtuz fhe ChJt.

2. yt xuLzhtu zwÃjefux ftuveytu mt&u Chelu Wvh lt mhltbu ÁcÁ / hSMxh yu.ze./ MvezvtuMx/ fwhegh&e rlg< mbgbtk btufjJtlt hnuNu.

3. ftuLx[tfxh©eytuyu xuLzhle mt&u BGþrlrmvj btLg hSMx[uNlle/ dJobuLx hSMx[uNlle ftuve, xuLzh ftuve <&t yLg vwhtJt mt&u yawf

mtbuj fhJtle hnuNu ylu fJh Wvh xuLzh lkch <&t ftuLxufx lkch sYh MvÐ œNtoJJtltu hnuNu. su ftuLx[tfxh©eytuyu hSMx[uNl heLgw

4. ftuLx[tfxhtuyu xuLzhbt cukfl wltb, Ft<t lkch, btEfh lkch ylu mhltBþ MvÐ yûthu jFÔþ.

5. xuLzh Ve vu ytuzoh / zebtLz z[tVx&e aqfJJtlehnuNu. œhuf xuLzh œeX yjd xuLzh xuLzhVe ChJtle hnuNu.

6. ytuAe hfble xuLzh Ve, R.yub.ze. fu xuLzh Ve, R.yub.ze. ÂJltlt xuLzhtu hœct<j (fuLmj) dKtNu.

7. xuLzh mt&u BþfJtbtk ytJ< hfblt ftb btxu htufzt, jtufj btRfh auf, rzbtLz z[tVx, vu ytuzoh fu cukf duhkxelt MJYvbtk <&t Yt. yuf

fhtuz&e Wvhle ykœtS< hfblt ftb btxu R.yub.ze.le hfb btºt rzbtLz z[tVx, vu ytuzoh fu ckuf duhkxelt MJYvbtk ytvJtle hnuNu.

8. cukf duhuLxe btºt ybœtJtœ Nnuhle s MJefthJtbtk ytJNu.

9. xuLzh Ve <&t R.yub.ze.le hfblt ze.ze./ aufle vtA¤ ftuLx[tfxh©eyu vtu<&t btuctRj lkch yJ~g jFJtltu hnuNu. ftuLx[t¾xhu vtu<&t

ze.ze. xuLzh R~gw &gt <theF ct>lt s ytvJt.

10. Nh<e xuLzh hœ ct<j dKtNu.

11. stu xuLzhbtk MvÐ WÕjuF fhtguj ntug <tu atubtmtlu fthKu Ft<tfeg MËalt yLJgu ßgthu ßgthu ftb ck^ htFJtLþk &tg <u mbglu ftble

BþÆ<btk bkswhe ytvJtbtk ytJNu. vhkðþ yt yLJgu ftuE CtJ J^thtu ytvJtbtk ytJNu lne. sule ltuk^ œhuf xuLzhhu juJe.

12. xuLzhtu ftuEvK fthK ytÃgt rmJtg MJefthJt fu lrnk MJefthJt <ule mkÃËKo m•tt BGþrl.rmvj frb§h©ele hnuNu.

13. xuLzhbtk stu ftuR mwDtht JDtht ntug <tu <u ykdu xuLzh Ch<t vnujt AuÕju r>Jmu rlg< JucmtEx y&Jt fauheyu sYhe <vtm fhelu s xuLzh

14. mefgtuhexe zevtuÍex/ vVtuboLm duhuLxele hfb Yt. yuf fhtuz mw^ele ykœtS< hfblt ftb btxu htufzt, jtufj btRfh auf, rzbtLz z[tVx, vu

ytuzoh fu cukf duhkxelt MJYvbtk <&t Yt. yuf fhtuz&e Wvhle ykœtS< hfblt ftb btxu mefgtuhexe zevtuÍex/ vhVtuboLm duhkxele hfb

btºt rzbtLz z[tVx, vu ytuzoh fu ckufduhkxelt MJYvbtk ytvJtle hnuNu.

15. mœh xuLzhbtk " GST rlgb Bþsc jtøþ vzNu. " <u Bþsc dKºte fhe xuLzh ChJtlt hnuNu.

zebtLz z[tVx / auf “Bgwrlrmvj frb§h©e, ybœtJtœ” lt ltbltu fZtJJtu.

A. Guarantees issued by following banks will be accepted as SD/EMD on permanent basis. All

nationalized Banks B. Guarantees issued by following banks will be accepted as SD/EMD for the period up to

March- 31, 2026. The validity cut-off date in the GR is with respect to the date of issue of Bank Guarantee

irrespective of the date of termination of Bank Guarantee.

1. Commercial Banks :-

2. A U Small Finance Bank

3. Bandhan Bank

4. Barclays Bank

5. City Union Bank

7. DBS Bank India Limited

9. Equitas Small Finance Bank

10. ESAF Small Finance Bank

11. Federal Bank

16. IDFC First Bank

17. Jammu and Kashmir Bank

18. Jana Small Finance Bank

19. Karnataka Bank

20. Karur Vysya Bank

21. Kotak Mahindra Bank

22. South Indian Bank

23. Standard Chartered Bank

24. Tamilnadu Mercantile Bank

25. Utkarsh Small Finance Bank

2. Co-operative and Rural Banks Of Gujarat :-

1. The Ahmedabad Mercantile Co-operative Bank Limited

2. Nutan nagrik Sahakari Bank Limited

3. Rajkot Nagarik Sahakari Bank Limited

4. Saraswat Co-operative Bank

5. SBPP Co-operative Bank

6. SVC Co-operative Bank

7. The Cosmos co-opretive Bank

8. The Gujarat State Co-Operative Bank

9. The Mehsana Urban Co-operative Bank Limited

10. The Surat District Co-operative Bank

11. The Surat Peoples Co-operative Bank

12. The Kalupur Commerical Co-operative Bank Limited

13. The Panchmahal District Co-operative Bank

14. The Baroda District Co-operative Bank

15. Baroda Gujarat Gramin Bank

16. Saurashtra Gramin Bank

bu.Bgwrl.frb§h©e, ybœtJtœ Bgwrl. ftuvtuhuNllt mhfgwjh lk.-81, Bþsc <btb «fthle

fLMx[¾Nlle yu¾xeJexebtk BþÏg ftuLx[t¾xh, mc ftuLx[t¾xhlt su bswhtu ftbdehe fh<t ntug <u <btb

bswhtuLþk øþsht< rcÕz´d yuLz y^h fLMx[¾Nl Jfombtk hSMxuNl fhtJÔþ VhSgt< Au.

AHMEDABAD MUNICIPAL CORPORATION

ENGINEERING DEPARTMENT (WEST ZONE)

Work Name :- Colour Work on Road Side Footpath kerbing, Central verge kerbing and Central verge

grills at Differant Places in Navrangpura Ward (ARC)

It. No. Qty. Items Rate Per Amount

1 6000 Applying priming coat over new steel and other 34.34 Smt

metel surface after and including preparing the

surface by throughly cleaning, oil,grease, dirt and

other foreign matter and scoured with brushes

fine steel wood, scrapers and sand paper with

ready mixed priming paint brushing red lead.

2 7200 Painting Two Coats on divider and footpath curb 71.86 Smt

surface / New Concrete Surface ( Painting two

coats after filling the surface with synthetic

enamel paint in all shades on new plastered

concrete surfaces) (AMC approved Rate )

3 50 Finishing wall with weather proof exterior Smt

emulsion paint on wall urface (two coats) to give

an required shape even shade after thoroughly

brushing the surface to remove all dirt, and

remains of loose powdered materials.etc

4 2500 Painting one coats (excluding priming coat) on Smt

previously painted steel and other metal surface

with enamel paint, brushing to give an even shade

including cleaning the surface of all dirt, dust and

other foreign matter...(R&B SOR 2023-24 ITEM

CODE 19003 PAGE NO-136)

5 2500 Extra over item every subsequent coat of paint Smt

.((R&B SOR 2023-24 ITEM CODE 19004 PAGE NO-

6 361 White washing with lime on wall surface (two 12.29 Smt

coats) to give an even shade including thoroughly

booming the surface to remove all dirt, dust;

mortar drops and other foreign matter.(Building

7 94 Scraping oil paint from steel and other metal 48.83 Smt

surface and making the surface even (with Hand

Scraping.)(Building SOR 2023-24 )

CONTRACTOR'S SIGNATURE ADDL.CITY ENGINEER

& STAMP (West Zone)

AHMEDABAD MUNICIPAL CORPORATION

Invitation for Bid (IFB)

1. The AHMEDABAD MUNICIPAL CORPORATION, (Hereinafter called “the Employer”)

invites sealed Tender document from reputed and qualified bidders for the construction of

Works detailed in the Table below:-

Sr.No Name of Works Approximate Bid Security Completio n

value of works (Rs.) Period

1 Colour Work on Road Side 10,00,000=00 10,000/- 12 Month

Footpath kerbing, Central verge

kerbing and Central verge grills

at Differant Places in

Navrangpura Ward (ARC)

2. T e n d e r (a complete set of bidding document) fee shall be Rs.900/- in the form of Demand

Draft / Pay Order from any Nationalized Bank in favor of MUNICIPAL COMMISSIONER,

Ahmedabad, payable at Ahmedabad, which shall be non refundable. The fees shall be paid at

the time of submitting the tender.

3. Interested bidders shall download the tender documents from website

http://amc.nprocure.com and http://nprocure.com. tender fee as mentioned in clause 2 above

shall be paid by the bidder at the time of bid submission.

4. All bids must be accompanied by Bid Security of the amount specified for the Works in the

above Table payable at Ahmedabad and drawn in favor of AHMEDABAD MUNICIPAL

CORPORATION, Ahmedabad. Bid Security will have to be in any one of the forms as

specified in Clause of ITB (Instructions to Bidders).

5. All Bids must be delivered to Assistant Manager " West Zone, Zonal Office", Dr.Ramanbhai

Patel Bhavan Ushmanpura,Ahmedabad. Not later than 12:00 hrs on Dt.07.03.2026

Seal and Signature of the Bidder Addl. City Engineer

AHMEDABAD MUNICIPAL CORPORATION

ENGINEERING DEPARTMENT

GENERAL CONDITION

1. Contractor shall produce the relevant registration certificate of AMC / State Govt /Central

2. Contractor shall register the work to labour commissioner as per labour act.

3. Contractor shall not sub-let the work without permission of the authority

4. Contractor should have sufficient skilled and unskilled laborers so that he shall start work at

different sites simultaneously. Contractor's having labour force available during festivals

shall only apply. Contractor can not stop the work due to on availably of labour force. In case

progress is delayed, contractor shall be penalized 0.1% of Tender amount per day for work

done after time limit, maximum up to 10% for remaining work.

5. Bitumen rate difference will be paid as per tender conditions, if applicable.

6. Advance payment / machinery advance will not be paid.

7. Payment of running bill will be made as per recent A.M.C. policy in force.

8. No extra payment will be made due to increase of central / state Govt. Taxes.

9. If the work is not completed within time limit the penalty will be recovered from immediate

bills of contractors.

10. If the material i.e. MH cover C.C block etc. supplied from Municipal Corporation store then

contractor shall not claim for any extra rate for non execution of such item, partly/fully.

11. In the specifications, "as directed"/"Approved" shall be taken to mean, "as

directed"/approved" by the Engineer-in-charge.

12. Wherever a reference to any Indian Standard appears in the specifications, it shall be taken to

mean as a reference to the latest edition of the same in force on the date of agreement.

13. In "Mode of Measurement" in the specifications wherever a dispute arises in the absence of

specific mention of a particular point or aspect, the provisions on these particular points, or

aspects in the relevant Indian Standards shall be referred to.

14. All measurements and computations, unless otherwise specified, shall be carried out nearest

to the following limits:

(i) Length, width and depth (height) ---- -- 0.01 Meter.

(ii) Areas--- --0.01 Sq. Mt.

(iii) Cubic Contents ---- --0.01 Cu.Mt.

15. The distance, which constitutes lead, shall be determined along the shortest practical route

and not necessarily the route actually taken. The decision of the Engineer-in-charge in this

regard shall be taken as final.

16. Where no lead is specified, it shall mean "all leads"

17. Lift shall be measured from plinth level.

18. Definite particulars covered in the items of work, through not mentioned or elucidated in it,

specifications shall be deemed to be included there in.

19. Reference to specifications of materials as made in the detailed specification of the items of

work is in the form of a designation containing the number of the specification of the

material and prefix 'M' e.g. 'M-5'.

20. Approval to the samples of various materials given by the Engineer-in-charge shall not

absolve the contractor from the responsibility of replacing defective material brought on site

or materials used in the work found defective at a later date.

21. The contract rate of the item of work shall be for the work completed in all respects.

22. No collection of materials shall be made before it is got approved from the Engineer-in-

23. Collection of approved materials shall be done at site of work in a systematic manner.

Materials shall be stone at site of work in a systematic manner. Materials shall be stored in

such a manner as to prevent damage, deterioration or intrusion of foreign matter and to-

ensure the preservation of their quality and fitness for the work.

24. Materials, if and when rejected by the Engineer-in-charge, shall be immediately removed

from the site of work within 24 hours.

25. No materials shall be stored prior to, during and after execution shall be kept in sufficient

numbers and in good working condition on the site of the work.

26. All works shall be carried out in workmanlike manners per the best techniques for the

particular item.

27. All tools, templates, machinery and equipment for correct execution of the work as well as

for checking lines, levels, alignment of the works during execution shall be kept in sufficient

numbers and in good working condition on the site of the work.

28. The mode, procedure and manner of execution shall be such that it does not cause damage or

over loading of the various components of the structure during execution or after completion

of the structure.

29. All necessary safety measures and precaution (including those laid down in the various

relevant Indian Standards) shall be taken to ensure the safety of men, materials and

machinery on the works as also of the work itself.

30. The testing charges of all materials shall be borne by the Contractor unless recovery at one

percent towards testing charges is separately made.

INSTRUCTION TO TENDERERS

TENDER VALIDITY PERIOD:

The tender shall be kept valid for acceptance for a period of One Hundred Twenty Calendar

days (120) from opening of price bids.

SECURITY DEPOSIT

Within 10 days of receipt of Acceptance from the Corporation, the successful tender shall

furnish to the Corporation Security Deposit of 5% (Five Percent) of the contract price cheque or

Bank Guarantee, pay order, or demand draft of Nationalized Banks and Schedule Banks only.

CONTRACTOR'S SIGNATURE ADDL.CITY ENGINEER

& STAMP (West Zone)

AHMEDABAD MUNICIPAL CORPORATION

ENGINEERING DEPARTMENT

GENERAL SPECIFICATION

Time limit for the work shall be 12 month period after the order to start the works. Progress of work

should be in proportion to time limit.

The contractor shall be remain responsible for Workmen’s compensation if any accident. The

contractor shall arrange for barricading at night and arrangement of Pagi at night to direct the traffic.

He shall be responsible for any damage to public. If any incident happen, during the execution of

work. In case of dispute for unseen or overlooked items the decision of the Dy. City Engineer shall

be final. The contractor shall have to give site clean of all rubbish during the work and at the time of

completion of work and hand over the site with final finishing of the work as directed. All the

rejected materials shall be removed from site within 24 hours by contractor at this risk and cost.

Debris shall have to cart daily from site.

For mixing mortar either for masonry or for plaster or for any other purpose contractor shall have to

prepare through of bigger size and mix the mortar in the required proportion. In on case he shall be

allowed to mix the mortar either on floor or any finished surfaces. The contractor shall have to make

his own arrangement for water required for the work.

If any extra item crops up during the progress of work the same shall be carried out by the contractor

and he shall be paid at the rate fixed by Add.C.E. as per the rate analysis based on latest SOR or if

item is not available in SOR than based on current market rates. In case of extra item decision of

Add. City Engg. shall remain final regarding rate.

If in the interest of the Corporation it is necessary to change either any site or the design of the

propose work the contractor shall carry out the same at his quoted rates without charges any extra

and the contractor will have to carry out the works and he will be paid at the rate quoted by him. No

claim for extra rate for subsequent changes in site and design is entertained.

The cubical contents of the cement bag shall be taken as 1-20 cft. Per bag and the contractors shall

have to prepare the measures boxes according to this measure.

Octroi exemption passes shall not be given for any materials required for the work. Contractor will

be fully responsible for compliance of the various provisions under contract Act. 1970 and the Rules

framed the to under.

The tender for the work shall remain open for a period (120) days from the date of opening of the

tenders for this work and that the tenderer shall not be allowed to withdraw on modify the offer on

his own during the period. If any tenderer withdraw or makes any modifications or addition in the

terms and conditions of his tender not acceptable to the Municipal Corporation the Municipal

Corporation shall without prejudice to any right or remedy be at liberty to forfeit in full the said

earnest money and black list the contractor.

If the work is not carried out within the specified time limit. from the date of order to start the work

the penalty of Rs.- (As per Form - B1) per day of delay shall be recovered from the immediate bills

payable to the contractor. Contractor has to make his own arrangement for procurement of steel and

Contractors should note the following conditions carefully:-

1. Conditional tender shall not be accepted.

2. All tenders are to be submitted in duplicate without which the tenders are liable to be

3. In case of tender downloaded from website, tender fee & EMD should be submitted in form

of demand draft or in cash.

4. Condition of Form - B1 Standard Specification of material & code of practice will be

applicable. Form B1 can be is available in website. Specification shall be as per ' R& B Dept.

- Govt. of Gujarat booklets of Building Works & and Road Works Specifications published

by Gujarat Book Depot, Sector-21. Gandhinagar. CONTRACTOR'S SIGNATURE

ADDL.CITY ENGINEER & STAMP ( West Zone) Mobile No.:-

CONTRACTOR'S SIGNATURE ADDL.CITY ENGINEER

& STAMP (West Zone)

AHMEDABAD MUNICLPAL CORPORATION

MAHANAGAR SEVA SADAN

Clause : 1 Contractor shall not employ any child having age 5 to 15 years as it is prohibited by Child

Labour Prohibition and Regulation Act 1986. Hon'ble Supreme Court has given certain guide

lines and as per the guide lines. If child labour is employed on the site work, the contractor

shall have to deposit Rs. 20,000.00 (Rupees Tw enty thousand only) in the child labour

welfare fund. If the employer refuses to deposit then action will be taken for contempt of

Supreme Court Judgement and also will be prosecuted by concerned authority. Because of

the breach of any provision of child labour prohibition and regulation Act 1986 by the

Contractor & Municipal Corporation becomes liable to pay any amount then the Municipal

Corporation shall recover the said amount from the contractor.

Clause : 2 The Standing Committee has decided to deduct 1/2% amount from each running bill as

per its Reso. No. 1783 Date 06--02-97, but the Municipal Corporation Board has recently

decided that the actual testing charge is taken and the remaining amount is refundable at the

time of final bill (As per Muni. Board Reso. No. 123 dated 25-02-97)

Clause : 3 Contractor has to follow prevailing Labour act and has to maintain labour register

acordingly,and has to follow other govt.rules.

Clause : 4 Quantity taken in tender are tentative and may differ as per execution of work. No claim

shall be entertain regarding QUANTITIES.

* MODIFICATION OF DOCUMENTS

Modification of specifications and correction/corrigendum in respect of the work if required will be

made by A.M.C. The same shall be placed on A.M.C website which may be downloaded by the

tendrers enclosed along with the tender duly signed. These shall form a part of tender. The tenderer

shall not add or amend the text of any of the documents except in so far as may be necessary to

comply with any addendum.

* ADDENDAUM / CORRIGENDUM .

Addendum or corrigendum conveying any change or correction in respect of the work shall form the

part of the contract documents. The full consideration shall be given to such addendum or

corrigendum or correction before submission tender duly filled in by the contractor. Therefore, the

contractor shall have to watch such addendum or corrigendum or correction published by A.M.C

through its website www.egovamc.com. Tenderes shall verify the number of addendum issued and

enclose the same with the tender documents,failing which the tender shall be liable for rejection and

no any complaint in respect to this shall be entertained under any circumstances.

CONTRACTOR'S SIGNATURE ADDL.CITY ENGINEER

& STAMP (West Zone)

AHMEDABAD MUNICIPAL CORPORATION ENGINEER DEPARTMENT

NAVRANGPURA WARD

TECHNICAL SPECIFICATION

Name of Work ;- Colour Work on Road Side Footpath kerbing, Central verge kerbing and Central verge

grills at Differant Places in Navrangpura Ward (ARC)

Following technical specifications shall be applicable to the relevant items of BOQ

ITEM NO:- 1 :- Applying priming coat new steel and other any surface after and incl.

preparing the surface by /thoroughly cleaning, oil, grease, dirt & other

foreign matter & scoured with brusnes fine steel wood. Scrpers & sand paper

with ready mixed paint brushing red lead.

Applying primting coat new steel and other any surface after and incl. preparing the

surface by /thoroughly cleaning, oil, grease, dirt & other foreign matter & scoured with brusnes fine

steel wood. Scrpers & sand paper with ready mixed paint brushing red lead.The rate shall be for a

unit of one sq. metre.

ITEM NO:- 2 :- Painting Two Coats on divider and footpath curb surface / New Concrete

Surface ( Painting two coats after filling the surface with synthetic enamel

paint in all shades on new plastered concrete surfaces)

1.0 Materials : The enamel paint shall conform to M-44 B.

The materials required for work of painting work shall be obtained directly from approved manufacturers or approved

dealer and brought to the site in maker's drums, kege etc. with seal unbroken.

All materials not in actual use shall be kept properly protected, lids of containers shall be kept closed and surface of

paint in open or partially open containers covered with a thin layer of turpentine to prevent formation of skin.

The materials which have become stale or flat due to improper and long storage shall not be used. The paint

shall be stirred thoroughly in its container before pouring into small containers. While applying also the paint

shall be continuously stirred in smaller container. No left over paint shall be put back into stock tins. When

not in use, the containers shall be kept properly closed.

If for any seasons, thinning is necessary, the brand of thinner recommended by the manufacturer shall be used.

The surface to be painted shall be thoroughly cleaned and dusted. All rust, dirt and grease shall be thoroughly removed

before painting is started. No painting on exterior or other exposed parts of the work shall be carried out in wet,

damp of otherwise unfavourable weather and all the surfaces shall be thoroughly dry before painting work is

Brushing operations are to be adjusted to the spreading capacity advised by the manufacture of particular paint. The

paint shall be applied evenly and smoothly by means of crossing and laying off. The crossing and laying off

consists of covering the area over with paint, brushing the surface hard for the first time over and then brushing

alternately in opposite directions two or three times and then finally brushing lightly in direction at right angles

to the same. In this process, no brush marks shall be left after the laying off is finished. The full process of

crossing and laying off will constitute one coat.

Each coat shall be allowed to dry completely and lightly rubbed with very fine grade of sand paper and loose particles

brushed off before next coat is applied. Each coat shall vary slightly in shade and shall be got approved from

Engineer-in-charge before next coat is started.

Each coat except the last cost shall be lightly rubbed down with sand-paper of fine pumice stone and cleaned of dust

before the next coat is applied. No hair marks from the brush or clogging of paint puddles in the corners of

panels angles of mouldings etc. shall be left on the work.

special care shall be taken while painting over bolts, nuts, rivets, overlaps etc. Approved best quality brushes shall be

Mode of measurements & payment :

The relevant specifications of item No. 19.12 shall be followed for mode of measurements and payment. The rate is

excluding priming coat.

The rate shall be for a unit of one sq. metre.

ITEM NO:-3:- Finishing wall with weather proof exterior emulsion paint on wall urface (two

coats) to give an required shape even shade after thoroughly brushing the surface

to remove all dirt, and remains of loose powdered materials.etc completeMaterials :

1.1 The water shall conform to M-1. Cement water proofing shall conform to I.S. 5410-1969.

Scaffolding : The relevant specifications of item No. 18.11 shall be followed.

Preparation of surface : The relevant specifications of item No. 18.11 shall be followed except that the word white

wash colour wash shall be substituted with water proofing cement paint. The surface shall be thoroughly wetted

with clean water before cement water proofing paint is applied.

Preparation of paint : Portland cement shall be prepared by adding paint powder to water and stirring to obtain a thick

paste, which shall then be diluted to a brushable consistency. Generally, equal volumes of paint powder and

water make a satisfactory paint. In all cases, the manufacture's instructions shall be followed. The paint shall be

mixed in such quantities as can used up within an hour of mixing as otherwise the mixture will set and

thickness, affecting flowing and finish. The libs of cement paint drums shall be kept tightly when not in use.

Application of Paint :

No painting shall be done when the paint is likely to be exposed to a temperature of below 7°C within 48 hours after

When weather conditions are such as to cause damage the work shall be carried out "in the shadow" as far as

possible. This helps the proper hardening of the paint film by keeping the surface moist for a longer period.

To maintain the uniform mixture and to prevent segregation, the paint shall be stirred frequently in the bucket.

For undercoated surfaces, the surfaces shall be treated with minimum two coats of water proof cement paint. Not less

than 24 hours shall be allowed between two coats. Next coat shall not be started until the preceding coat has

become sufficiently hard to resist marking by the brush being used. In hot dry weather, the preceding coat shall

be allowed between two coats. Next coat shall not be started until the preceding coat has become sufficiently

hard to resist marking by the brush being used. In hot dry weather, the preceding coat shall be slightly

moistened before applying the subsequent coat.

The finished surface shall be even and uniform in shade, without patches, brush masks, paint drops etc.

The cement paint shall be applied with a brush with relatively short stiff hog or fibre bristles. The paint shall be

brushed in uniform thickness and shall be free from excessive heavy brush marks. The lamps shall be well

Water proof cement paint shall not be applied on surfaces already treated with white wash colour wash, distemper dry

or oil bound varnishes, paint etc. It shall not be applied on gypsum, wood and metal surfaces.

Curing : Painted surfaces shall be sprinkled with water two or three times a day. This shall be done between coats and

for atleast two days following the final coat. The curing shall be started as soon as the paint has hardened so as

not to be damaged by the sprinkling of water say about 12 hours after the application.

Protection measures shall be taken as per item No. 18.11 para 2.6.

Mode of measurements & payments :

The relevant specifications of item No. 18.11 shall be followed. The

rate shall be for a unit of one sq. metre.

ITEM NO:- 4 :- Painting one coats (excluding priming coat) on previously printed steel and

other metal surface with synthetic enamel paint, brushing to give an even

shade including cleaning the surface of all dirt, dust and other foreign matter.

Painting one coats (excluding priming coat) on previously painted steel and any other

surface with enamel paint, brushing to give an even shade including cleaning the surface of

all dirt, dust and other forign matter.

The Work Shall Be Done As Per Engg.in Charge.

Mode of Measurnment Shall be on Smt Basis.

ITEM NO:- 5 :- Extra over item above For every subsequent coat of paint.

Extra over item above For every subsequent coat of paint.

The Work Shall Be Done As Per Engg.in Charge.

Mode of Measurnment Shall be on Smt Basis.

ITEM NO:- 6:- White washing with lime on wall surface (two coats) to give an even shade including

thoroughly booming the surface to remove all dirt, dust; mortar drops and other foreign

The calearcole shall be made from glue and boiling water by mixing 1 kg. Mixture shall be suitably tinted where

required for use under coloured distemper if required. Glue shall conform to I.S. 852-1969 (Specifications for

Lime used shall be freshly burnt class ‘C’ Lime (fat lime) and white in colour conforming to I.S. 712-1973. Water shall

conform to M-1 Best quality of gum shall be sued in the preparation of white wash. Ultramarine blue or Indigo:

This shall conform to I.S. 55-1970 for points and shall be used for preparation of white wash. Pigments: mineral

colours, not affected by lime shall be sued in preparing colour wash.

Preparation of white wash solution :

Surface already white or colour. The fat lime shall be slaked at site and shall be mixed and stirred with about five

litres of water for 1 kg. of unslaked lime to make a thin cream. This shall be allowed to stand for a period of

hours and then shall be screened through a clean coarse cloth, 4 kg. of gum dissolved in hot water shall be added to

each cubic metre of lime cream. Small quantity of ultramarine blut (Upto 3 gms. Per kg. of lime) shall also be added

to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use.

Preparation of surface :

The surface shall be thoroughly cleaned of all dust, dirt, mortar cropping and other foreign matters before white wash is

The surface spoiled by smoke soot shall be scraped with steel wire brushes or steel scrappers or shall be rubbed with

over burnt surkhi or brick bats. The surface shall be then broomed to remove all dust, dirt and shall be washed

with clean water.

Oil or grease spots shall be removed by suitable chemical and smooth surface shall be rubbed wire brushes.

All unsound portion of the surface plaster shall be removed to full depth of plaster in rectangular patches and plastered

again after raking the masonry joints properly. Such portion shall be wetted and allowed to dry. They shall then

be given one coat of white wash.

All unnecessary nails shall be removed, the holes cracks patches etc. shall be made good with materials similar in

composition to the surface to be prepared.

Scaffolding : Wherever scaffolding is necessary it shall be erected in such a way that as far as possible on part of

scaffolding shall rest against the surface to be white or coloured washed. A properly secured strong and well

tied suspended platform (Zoola) may be used for white washing. Where ladders are sued, pieces of old gunny

bags shall be tied at top and bottom to prevent scratches to the floors and walls. For white washing of ceilings

proper stage scaffolding shall be erected where necessary.

Application of white wash :

On the surface so prepared the white wash shall be applied with ‘Moon’ brush. The first stroke of the brush shall be

from top downwards, another from bottom upwards over the first stroke and similarly one stroke from the right

another from the left, over the first stroke brush before the it dries. This will from one coat. Each coat

shall be allowed to dry before next coat is applied. Number coats as specified in item shall be applied. It shall

present smooth and uniform finish free from brush marks and it should not come off easily when rubbed finger.

Splashing and dropping if any on the doors and windows, ventilators etc. shall be removed and the surface cleaned.

Priming and Alkali resistant treatments, scrapping of surface washing etc. surface spoiled by smoke soot removed of oil

and grease spots treatment for infection with effloresces moulds moss, funji and kitchen and patch repairs to

plaster wherever done shall not be paid extra.

4.0 Mode of measurements & payment :

All the work shall be measured in the decimal system as under :

(a) Dimensions shall be measured to the nearest 0.01 M.

(b) Area in individual items shall be worked out to the nearest 0.01 Sq. M.

All the work shall be measured in sq. mt. Deductions for jambs, soffits, stills etc. for opening not exceeding 0.5 sq.

mt. each in area for ends of joints, posts, beams, girders, steps etc. not exceeding 0.5 sq. mt. each in area and for

opening exceeding 0.3 sq. mt. and not exceeding 3.0 sq. mt. each in area deductions and additions shall be made as

No deductions shall be made for ends of joints beams, posts etc. and openings not exceeding 0.5 sq. mt. each. No

addition shall be made for reveals, jambs, soffits, sills etc. of these openings nor for finish around ends of joints,

beams, posts etc.

Deductions for openings exceeding 0.5 sq. mt. but not exceeding 3 sq. mt. each shall be made as follows and no

addition shall be made for reveals, jambs, soffits etc. of these openings :

(a) When both the faces or walls are provided with finish, deduction shall be made for one face only.

(b) When each face of wall is provided with different finish deduction shall be made for that side of frame for door,

windows etc. on which width of reveals is less than that of the other side, where width of reveals on both faces

of wall are equal, deduction of 50% of area of opening on each face shall be made from total area of finish.

(c) When only one face of wall is treated and the other face is not treated, full deduction shall be made if the width

of reveal on the treated side is less than that on the untreated side, but if the width of the reveal is equal or more

than on the untreated side neither deductions nor additions be made for reveals, jambs, soffits, sills etc.

In case of area of opening exceeding 3 sq. mt. each, deduction shall be made for openings but jambs, soffits, shall be

No deduction shall be made for attachment such as casing, conducts, pipe, electric wiring and the like.

corrugated surfaces shall be measured flat as fixed and not girth. The quantities so measured shall be increased by the

following percentage and the resultant shall be included with the general areas.

(a) Corrugated steel sheets 4%

(b) Corrugated A. C. Sheets 20%

(c) Semi corrugated A. C. Sheets 10%

(d) Nainital pattern roof (Plain sheeting with rolls) 10%

(e) Nainital pattern roof (with corrugated sheets) 25%

Cornices and other wall features, when they are not picked out in a different finish/colour shall be girthed and

included in the general area.

The rate shall include the cost of all materials, labour, scaffolding, protective measures etc. involved in all the

operations described above.

The rate shall be for a unit of one sq. metre.

ITEM NO:-7 Scraping oil paint from steel and other metal surface and making the surface even (with

Hand Scraping.)

The Work Shall Be Done As Per Engg.in Charge.

Mode of Measurnment Shall be on Smt Basis.

Seal and Signature of the Bidder Add.City Engineer(West Zone)

Amdavad Municipal Corporation

ybœtJtœ BGþrlrmvj ftuvotuhuNl

vr©b Ítul - Esluh Ftðþ

1. Ft<t îtht «t&b LOI (juxh ytuV RLxebuNl) RMgw fhJtbtk ytJNu. LOI (juxh ytuV RLxebuNl)

bégt ctœ rœl-10 btk 5 % (vtka xft) juFu auf&e / rzbtLz z[tVTx / vu ytuzoh / luNljtEÍz cukf

duhkxe&e zevtuÍex Che fhthvºt fhJtltu hnuNu. <u ctœ Jfo ytuzoh RMgw fhJtbtkk ytJNu ylu

Jfoytuzohle <theF&e mbg bgtoœt NÁ &guj dKJtbt ytJNu <ub A<tk vK ftb NY fhJtbtk lrn

ytJu <tu rlgbtlwmth ftgoJtne fhJtbt ytJNu.

2. Nh<e xuLzh MJefthJtbtk ytJNu lrn.

3. xuLzh Jujezexe 120 rœJm hnuNu.

4. xuLzh MJefthÔþk, hesu¾x fhÔþk, ftulu ytvÔþk ylu fgt CtJ&e ytvÔþk, <u ykdu zu. BGþrl. frb.©e ltu

rlKog ytFhe hnuN.u

5. xuLzh Chuj ftuLx[t¾xh vife ftuEvK ftuLx[t¾xhlu vK yt CtJu ftb ytvJtbtk ytJu <tu ceò btLg

ftuLx[t¾xh Jtk^tu jE NfNu lrn.

6. yufe JF<u yuf fh<tk Jæþ søgtytuyu ftb NY fhJtltu Jfoytuzoh b¤u <tu ftb yuf mt&u s c^u NY

fhÔþk vzNu. yuf ftb ÃþÁ &tg vAe cesw ftb NY fheyu yuÔþk atjNu lrn.

7. atÕþ ftbu ftuE vK mrJom jtEllu LþfNtl l &tg <u he<u ftb fhÔþk vzNu, òu ftuE mrJom jtEllu

LþfNtl &Nu <tu <ule mkÃËKo sJtcœthe (òlbtjle) ftuLx[t¾xhle vtu<tle hnuNu. mtEx vh ftb

œhBgtl bswh fu sl<tlt ftuE btKmlt òl btj fu LþfNtl &tg <ule sJtc>the ftuLx[t¾xhle

hnuNu. vtujem Vhegt> &tg <tu <ule sJtc>the vK ftuLx[t¾xhle hnuNu. CuFz ^me l vzu <ule

sJtc>the vK vtujem Vhegt>btk ftuLx[t¾xhle hnuNu. CuFz ^me l vzu <u btxu mjtb<elt vdjtk

(suJt fu >tuhzwk ctk^e bsqh Ftztbtk W<thJt, mtuh´d ylu Mx[x´d fhJt rJduhu) je^t Jdh bsqhlu

Ftztbtk W<thNu <tu ftuLx[t¾xh s vtujem Vhegtœbtk sJtcœth hnuNu ylu BGþrl. ftuvtuohuNlltu ftuEvK

MxtV ytlt btxu sJtcœth hnuNu lrn.ytxÕþk mbSlu s xuLzh ChÔþk.

8. yt xuLzh su <u Jdolt btLg gtœelt ftuLx[t¾xhtu Che NfNu. dJbuoLxlt btLg ftuLx[t¾xhu y.BGþ.ftuvtuo.

btk btLg ftuLx[t¾xhle gtœebtk hSMx[uNl ðþhk< fhtJÔþk vzNu.

9. yt Wvhtk< y.BGþ.ftuvtuo.lt slhj ftuLx[t¾x fLzeNl vK btLg htFJtle hnuNu. Vtubo ce-1le Nh<tu

ck^lf<to hnuNu. ftb htuz ylu rcÕz´d Ftðþk - øþsht< htßglt MvuNeVefuNl «btKu fhJtLþk hnuNu

<&t MxtVle Mþalt vK mtEx Wvh atÕþ ftbu ægtlbtk juJtle hnuNu. ce-1 Vtubo <&t MvuNeVefuNl

øþsht< çþf Mxtuh, mu¾xh-21, dtk^eldh Ft<u&e ftuLx[t¾xhu ò<u bu¤Je juJtltu hnuNu. <u Jtkaelu vAe

10. ftuLx[t¾xhlu vubuLx BGþrl. ftuvtuo. Ltt rl<erlgb Bþsc fhJtbtk ytJNu.

11. ftuEvK ftgœtfeg jexeduNl ybœtJtœ Nnuhle ftuxobtk hnuNu.

12. bxehegj fu ceò xuMx´d hevtuxo ftuLx[t¾xhu vtu<tlt Fauo ftuvtuohuNl sKtJu <u søgtyu fhtJJtlt hnuNu.

yt ykdultu mkÃËKo Fao <&t BGþrl. MxtVlu juctuhuxhe Mþ^e <&t buLGþVu¾ah´d søgt Mþ^e jtJJt jE

sJtltu Fao vK ftuLx[tfhu CtudJJtltu hnuNu.

13. juch yu¾x «btKu hSMx[uNl ykdu ybj fhJtltu hnuNu <&t fuxjt juch jtJNtu <u vK sKtJJtLþk

hnuNu. juch yu¾x «btKu ftgoJtne lrn &E ntug <tu <u btxu ftuLx[t¾xh mkÃËKovKu sJtcœthe hnuNu.

14. btj su <u Mxtumo Wvh y&Jt mtEx Wvh Mþalt Bþsc W<thJtltu <ubs dtuXJJtltu hnuNu.

15. muÕm xuût, ytu¾x[tug, mhatso, yLg xuût fu yLg ftuEvK fhJuht ChJtle sJtc>the ftuLx[t¾xhle

16. atEÕz juch yuBvjtug fhe NftNu lrn.

17. ftuLx[t¾xh îtht yuze.mexe.Rsluh©e / zu. mexe. Rsluh©ele mwalt bwsclt bxehegjltk muBvj hsw

18. ftuLx[t¾xhu atÕþ ftbu mtEx Wvh zeSxj fubuht&e ftb atÕþ &gt vnujtk, åttÕþ ftbu <&t ftb ÃËKo

&gtlt Vtuxtud{tV BGþrl. yturVmbtk ytvJtlt hnuNu.

19. ftuEvK fthKmh xuLzh hœ fhJtbtk ytJu <tu ftuLx[t¾xh <u ykdu ftuEvK «fthltu n¬tu fu J¤<hle

btkdKe fhe NfNu lrn. yt Nh< MJeftgo ntug <ubKu s xuLzh ChÔþk.

20. bxehegÕm suJt fu hu<e, #xtu, mebuLx, vtEv, rJduhu MxtLzzo bxehegÕm MvuNeVefuNl «btKult

jtJJtlt hnuNu. ßgtk ftuE atuFJx l &E ntug ðgtk ytE.yum. ftuz «btKu bxehegÕm jtJJtLþk <&t

xuMx´d fhtJJtLþk hnuNu.

21. htßg / fuL÷ mhfth©elt JF<tu JF<lt ftgœt Bþsc su ftuE hfble fvt< fhJtlt nwfb

mhfth©eyu fhuj ntuE <u Bþsc ftuLx[tfxlt cejbtk&e fvt< fhJtbtk ytJNu.

22. juch JuÕVuh Vkz btxu ntjbtk htßg mhfth©eyu fhujt nwfb Bþscle hfb cejbtk&e ftve juJtbtk

23. dwsht< mhfth©elt ©b,fitNÕg rJftm ylu htusdth wJCtdlt XhtJ ¢btkf LED/WRT/e-

file/11/2024/0293/M2 mraJtjg,dtk^eldh <t.15.02.2024 bwsc fboathe ©bgtudele

studJtR vrhvwKo &tg <u mwrlù< fhJtlw hnuNu.

Wvhtu¾< Nh<tu <&t rlgbtu buk ft¤SÃËJof Jtkae Au ylu blu fçËj bksqh Au.

ftuLx[tfxhle mrn <&t me¬tu yuze.mexe Rsluh (v.Ítul)