Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹8.7 LAccepted-AOC | 1 | Accepted-AOC L1 | |
| 2 | Rejected-Technical | - | Rejected-Technical above amount |
Tender Value
₹9.0 L
EMD Value
₹21,800
Closing Date
16 Nov 2023, 9:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Assistant Secretary
punnayurkulam gp
construction of aganvadi
2023_DP_618481_1
A5-2050/2023-1
Open Tender
Civil Works - Buildings
Item Rate
180 days
Punnayurkulam
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,800
Yes
₹21,800
Yes
23 Jul 2025
3 Nov 2023
17 Nov 2023
4 Nov 2023
16 Nov 2023
4 Nov 2023
Amount
building work
stone for masonary work
portland cement
coarse sand Zone III
stone aggregate (single size) 4omm nominal size
stone aggregate(single size) 20mm nominal size)
Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper
Vibrator (Needle type 40 mm)
Stone Aggregate(single size): 10 mm nominal size
Solid blocks of size 30x20x20cm
Solid blocks of size 30x20x15cm
Solid blocks of size 40x20x10cm
Twisted steel/deformed bars
Structural steel such as tees, angles, channels and R.S. joists
Red oxide Zinc chromate primer
Adjustable span ESO+SI (2•3 3.40)
Adjustable telescopic prop 3 M (2.02-3.75m)
Beam clamp 300-380 (4 0 1070 mm)
Wall form panel 1250x450xmm
Corner angle 45x45x5 mm 2.50 long
Column clamp 450x1070 mm
Prop 2 m (2-3.5m)
Second class kail wood in planks
Second class kail wood in scantling
Hollock ballies 125 mm diameter
Anjiliwood scantls
Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm
Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm
Bright finished or black enameled mild steel screws 40 mm
Bright finished or black enameled mild steel screws 20 mm
Anjiliwood planks
float glass sheet of nominal thickness 4mm (weight not less than 10kg/sqm)
Mild Steel round bar above 12 M dia
Flats up to 10 mm in thickness
rawl plug 50mm (designation 10 nos)
Factory made door frame size 50x47 mm with wall thickness 5 mm made of single piece extruded profile
35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished)
powder coated MS butt hinges 100mm x50mm x1.9mm
200MM Aluminium aldrop
Iron hooks & eyes 100 mm
Anodised Aluminium tower bolt (barrel type)300x10 mm
Chromium plated Brass screws 30 mm
Fine sand (zone IV)
Vitrified floor tile 60x60 cm
Ceramic Glazed Tiles 1st quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black
Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc.
Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre
Plastic emulsion paint
Synthetic enamel paint in black or chocolate shade
Black plastic seat (soild) with lid C.P.brass hinges and rubber buffers
vitreous china pedestal type water closet
flushing cistern pvc (10lts capacity low level white with fittings accessories and flush pipe)
vitreous china flat back wash basin 630x450mm)
15 mm C.P.brass tap
C.P. brass waste 32 mm
CI bracket for wash basin and sinks
Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm
PTMT - Towel Rail (600 mm)
second class teak wood in scantling
Chromium plated Brass screws 2 mm
Rectangular shape 453x357 mm Mirror with Plastic moulded frame
Hard board 6 mm thick
brass stop cock 15mm dia
Brass full way valve with C.I. wheel (screwed end) 25 mm dia
PTMT soap dish- holder(138x102x75mm)
PVC pipe 20 mm outer dia 10 kfg/cm2
semi rigid pvc waster pipe for sink and wash basin 32mm dia with length not less than 700 mm i/c PVC waste fittings
PVC pipe 110 mm outer dia. 4kgf/cm2
PVC pipe 25 mm outer dia. 10kgf cm2
PVC pipe 63 mm outer dia . 6kgf/cm2
PVC pipe 50 mm outer dia.6kgf/cm2
PVC pipe 32 mm outer dia. 10Kgf/cm2
PVC bend 63 mm dia
PVCTee 63x63x63 mm dia
PVC end cap 63 mm dia
PVC ventcowl63 mm dia
PVC 45 degree Elbow 63 mm dia
15mm PTMT bib cock
Polyethylene water storage tank with cover and suitable locking arrangemnet
Mild steel round bar 12 mm dia andbelow
Welding by electric plant
Mild steel tubes hot finished welded type
AKSHAY K V
Bidder Name
ALI AKBAR
AKSHAY K V
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_928272.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .