Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹80.8 L
EMD Value
₹81,000
Closing Date
23 Nov 2026, 6:00 pmDue today
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Dy conservator of Forest Valsad North Division ,Valsad
Development of Hi Tech Nursery at Rajpuri Central Nursery Under Dharampur Range, Ta.Dharampur,Dharampur Range of Valsad North Division.
364242
19 of 2026-27
Open
Civil Works
Works
Valsad
17 documents required · 15 mandatory · 2 optional
₹2,400
DEPUTY CONSERVATOR OF FORESTS VALSAD NORTH
₹81,000
6 Nov 2026
6 Nov 2026
6 Nov 2026
23 Nov 2026
6 Nov 2026
120 days
DEVELOPMENT OF HI-TECH NURSERY AT RAJPURI CENTRAL NURSERY UNDER DHARAMPUR RANGE,
Bill of Quantities
Item Description of Item (with brief specification and reference Quantity Unit Rate In Amount
No to book of specifications) FIghure
1 Clearing and grubbing road land including uprooting rank
vegetation grass bushes,shrubs,sapling and trees girth up to
300 mm removal of stumps of trees cut earlier and disposal of 0.05 Hectare 28,393.04
unserviceable materials (C) By mechanical means in area of
Excavation for foundation for depth from up to 1.5 M.
m including sorting out and stacking of useful materials
2 and disposing off the excavated stuff up to 50 Meter 111.10 Cmt 149.83
lead.(B) Dense & Hard Soil, etc. complete as per detailed &
directed by EIC.
3 Excavation for foundation upto 1.5 m depth including
sorting out and stacking of useful materials and disposing off 172.40 Cmt 261.73
the excavated stuff upto 50 Meter lead.(B) Dense or Hard soil
4 Filling in foundation and plinth with murrum or selected soil in
layers of 20cm. thickness including watering, ramming and 91.70 Cmt 289.06
consolidating etc. complete. (more than 10 ton)
5 Filling available excavated earth (excluding rock) in
trenches. plinth, sides of foundations etc. in layers not
exceeding 20 cm. in depth consolidating each disposited 141.10 Cmt 130.39
layer by ramming and watering.
Carring out plinth treatment to post construction / existing
structure by spraying chemical solution for termite control
treatment including labour and material consistent with I.S.I
specification. Using Chlordane and Chiorpurfiles 20 EC. As
Per 6131_paret-II Concentration Weight one percent is
recommended i.e one liter 20 EC chemical emulsion with
liter give 1 % concentration inclusive of one liter chemical
emulsion application at the rate of 5 Liter chemical/
Sqm of surface is recommended as per I.S.
Providing and laying cement concrete 1:4:8 (1- Cement : 4-
coarse sand : 8- hand broken stone aggregates 40 mm
7 nominal size) and curing complete excluding cost of 23.00 Cmt 2,680.21
formwork in (A) Foundation and Plinth
Providing and laying cement concrete 1:3:6 (1- Cement : 3-
8 : 6- Graded brick bat aggregate 40mm normal size) and curing 13.50 Cmt 2,986.00
complete excluding cost of formwork in (A) Foundation and
Providing and laying cement concrete 1:2:4 (1- Cement : 2-
9 : 4- graded stone aggregates 20 mm nominal size) and curing 38.10 Cmt 3,683.34
complete excluding cost of formwork in (A) Foundation and
GRADE SLAB (M200) : Providing and laying controlled
cement concrete
M.200 Concrete with all lead, including all transportation,
10 pumping, pouring, curing of concrete etc complete including 17.00 Cmt. 4,731.70
the cost of formwork but excluding the cost of reinforcement
for reinforced concrete work in M200 Grade Slab
Providing and laying controlled cement concrete M:25
and curing complete including cost of necessary, form
work, compacting with vibrator curing centering &
11 shuttering in true line and level etc, but excluding the 6.80 Cmt. 4,593.78
cost of reinforcement for RCC work in Foundations
footings, base of columns and Raft etc., for any type of cross
section area complete as directed by E. I. C.
Providing and laying controlled cement concrete M:25
and curing complete including cost of necessary, form
work, compacting with vibrator curing centering &
12 shuttering in true line and level etc, but excluding the cost 2.60 Cmt. 6,270.94
of reinforcement for RCC work in column up to plinth lvl. etc.,
for any type of cross section area complete as directed by E. I.
Providing and laying controlled cement concrete M:25
and curing complete including cost of necessary, form
work, compacting with vibrator curing centering &
13 shuttering in true line and level etc, but excluding the cost 16.40 Cmt. 6,228.62
of reinforcement for RCC work in TIE, GROUND, &
PLINTH BEAMS for any type of cross sectional area.
etc., complete as directed by E. I. C.
Providing TMT Bar FE 500D reinforcement for R.C.C.
14 work including bending, binding and placing in position 3954.00 Kg 76.21
complete upto ground floor level
Brick work using common burnt clay building bricks
having crushing strength not less than 35 kg./Sq.Cm. in
15 foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine 28.20 Cmt 4,021.02
sand)(B) Conventional
Half brick masonry in common brunt clay building
bricks having crushing strength not less than 35 Kg/Sq.Cm. in
16 Cement mortar 1:4 (1-Cement : 4 -coarse sand ) (B) 11.50 Smt 653.01
Conventional half brick masonry at Ground Floor level.(B)
Providing 20 mm thick double coat mala cement plaster on
/ concrete work for plastering comprising of base coat of
17 12 mm thick cement plaster in cement mortar (1 Cement : 25.20 Smt 272.48
4 coarse sand) in rough finishing and 8 mm thick top coat
of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished
with trovel including scaffolding curing etc. complete.
Finishing wall with Weather proof exterior emulsion paint on
wall surface (two coats) to give an required shape even
18 shade after thoroughly brushing the surface to remove all dirt, 25.20 Smt 114.53
and remains of loose powdered materials.etc complete.
Providing and fixing pf 3mm thick Aluminium Composite
panel (ACP Sheet) approved shade and color including
19 removing of old sheet with necessary fastener, screws with 81.70 Smt 761.24
all tool and tackle complete as per directed by Engineer-In-
Providing and fixing 6 mm thick charcoal coloured PVC
sheet/panel wall cladding, UV resistant and suitable for
interior/exterior application, fixed over approved GI/MS
framework using corrosion-resistant screws/fasteners,
including cutting, drilling, jointing, edge trims, profiles, sealant,
necessary accessories and labour for complete installation, all as
per manufacturer’s specifications and as directed by the
Providing and fixing PUF Insulated continueous sandwich
panels for walls of total thickness not less than 50 mm and
width 1.0 m made out from continue line method on automatic
plant.Panel shall have 0.5 mm thick pre coated GI sheet on
both side of Polyurethane Foam confirming to IS
12436:1988.The Precoated sheet shall be of minimum
mpa steel grade confirming to IS 14246:1995 and shall
have zinc coating of minimum 120 gsm as per IS:277:1992
, 5-7 microns epoxy primer on both side of the sheet and
polyester top coat 15-18 micron.The PPGI Sheet shall have
plastic protective guard film of minimum 25 microns to avoid
scratches during trasportation.The panels shall be vertically
joined together by tongue and groove joints. The PU Foam
shall be self-extinguishing, fire retardant type having
minimum density of 40 Kg/Cu.mt.( +, - 2 Kgs) including
0.25 mm thick craft paper edging on both edges. The
panels shall be fixed to the steel frame structure with
minimum 5mm thick self tapping GI screws of required length
and nos. with minimum spacing of 300 mm c/c.
P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm
(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand)
on new surface or fixing on existing flooring by adhesive
22 material including dismentaling of existing flooring and 87.90 Smt 1,404.64
jointed with color cement slurry including finised with flush
pointing & cleaning the surface etc. complete for light shade
Providing and fixing 35 mm thick (or as specified) ISI marked
flush door shutters conforming to IS : 2202 (Part I)
decorative type, core of block board construction with frame
of 1st class hard wood, with 1mm. thk, ISI marked designed
laminate in any finish on both faces of shutters., slit
openings with bidding Patti & 6mm thk designed acid
wash glass,. Stainless Steel butt hinges [125x65x2.5mm.
23 IS1281712] with necessary screws, using branded S.S. matt 8.00 Smt 3,852.90
/glossy / platinum finished accessories, Colour / polishing all
bidding parts, and also incl. with all Material, labour,
tools, tolerance, scaffolding etc. complete as per
/direction and approved by Architect, and directed by
Engineer-In-Charge.
Providing and fixing window having extruded aluminum
Colour anodized section frame main outer size 95mm x 24mm
x 1.17mm @ wt.of 0.738 Kg/mt , horizontal Three track
member size 92mm x 31.75mm x 1.30mm,@ Wt.1.07 Kg/mt
, vertical member of size 92mm x 31.75mm x 1.50mm @ Wt.
1.06 Kg/mt with sliding shutters of horizontal member size
24 40 mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, vertical 11.60 Smt 1,583.95
member of size 40mm x 18mm x 1.29 mm @ wt.of
0.456Kg/mt/ with 5 mm thick transparent bronze colour
tinted float glass with powder coated aluminum fittings
and fixtures and transparent silicon sealant glass fixing to
frame as per details etc
Providing and Fixing 12 mm thick moisture & fire
resistant heavy duty Cement Fibre Board (High pressure steam
cured) Confirming to ISO 4862 2000 in wall/Roof panels of
25 one face of cold formed galvanised light gauge steel frame 25.30 Smt 849.01
structure to form wall / partition as & Where directed by
Engineer-in-Charge including 2 coats of putty and 2 coats of
interior paint complete as per directed by Engineer In charge
Providing & Fixing M.S. grills of required pattern to
wooden frames of windows, RCC or as specified in drawings
26 etc. with M.S. flats at required spacing & frame around, square 202.00 Kg 104.04
or round bars with round headed bolts & nuts or by screws (A)
Plain Grill, as per detailed & directed by EIC.
Steel work, welded in built up sections framed work
including cutting, hoisting, fixing in position and applying a
priming coat of red lead paint.
27 (A)In beams and joists, channels angles Tees, flats, with 3278.00 Kg 127.95
connecting plates or angle cleats as in main and cross beams.
Hip and jack rafters, purlins conneted to common rafters and
Painting two coats (including priming coat) on new steel and
other metal surface with enamel paint, brushing, interior to
28 give an even shade including cleaning the surface an even 146.00 Smt 122.49
shade including cleanicn the surface of all dirt, dust and other
foreign matter.
Providing, fabricating and erecting galvanized steel work in
built-up sections, framed work including cutting, drilling,
welding, hoisting, fixing in position with necessary bolts,
nuts, washers, cleats and connecting plates, complete in all
respects, including preparation of surfaces and hot dip
29 galvanizing with minimum coating thickness as specified, for 19631.00 Kg 123.37
beams, joists, channels, angles, tees, flats, connecting plates
or angle cleats, main and cross beams, hip and jack
rafters, purlins connected to common rafters and the like,
complete as directed by Engineer-in-Charge.
Providing and fixing corrugated UPVC roofing sheets,
minimum 2.5 mm thick, of approved make and colour,
including all necessary accessories such as self-drilling
screws with EPDM washers, ridge/side flashing, overlaps,
30 cutting, drilling, wastage, transportation, loading/unloading 69.00 Smt 1,010.00
and fixing to existing/proposed steel/MS purlins or
supporting framework, complete in all respects as directed by
Engineer-in-Charge.
SHEETING: Supplying & erecting of roofing for shed made out
of Colored Galvanium 0.5mm TCT as per ASTM A653(M)
Grade 80, 550 Mpa along with required accessories, flashings
etc. of approved made & of profile 1mt, pitch of 250mm
& rib ht. 35mm with three mineral at centre & capillary
groove, Top coat should be of 25 microns. Also providing and
fixing ridges or hips and all accessories & fitments to be
31 made of the same materials. No separate measurements 128.00 Smt 858.67
shall be paid for any accessories. Sheets to be fixed by
self-drilling screw of carbon steel, case hardened & zinc
plated 10-5 microns chromate dipped with assembled
sealing washer of EDPM, etc.complete by an architect. (Actual
laid area of the sheeting shall be measured & same shall be
paid. No over lapping & wastage of the sheet should be
measured or paid.) '
Supplying and fixing reinforced concrete heavy duty non-
pressure semi circle pipes for drainage with collars for culverts
carrying heavy traffic as per IS 458-1991 specifications
32 including setting the pipes in C.M. 1:2 watering and laying 300.00 Rmt 665.48
(to level or slopes) of class NP2 of following internal
daimeters.(i) 300mm dia.
Providing and laying 63 mm nominal diameter PVC
pressure pipe, ISI marked, conforming to relevant IS
specifications, suitable for working pressure of 4 kg/cm²,
33 including all necessary PVC/GI specials, couplers, bends, tees, 2200.00 Rmt. 203.52
sockets, solvent cement, jointing materials, testing and
commissioning, complete as required and as directed by the
Engineer-in-Charge.
Providing and laying 16 mm nominal diameter plain
LDPE/LLDPE lateral pipe for micro-irrigation system,
suitable for irrigation application, including cutting, laying,
34 connecting to take-off fittings/micro-tubes, end closing and 7500.00 Rmt. 25.25
all necessary jointing accessories, complete as per
manufacturer’s specifications and as directed by the Engineer-
Providing and fixing pressure-compensating micro
sprinkler for irrigation, made of UV-stabilized engineering-
grade plastic, suitable for operating pressure of approximately
1.5–3.0 kg/cm², with discharge of approximately 40–120
LPH and uniform spray coverage, including sprinkler
head, spike/stake, micro tube/connector, take-off adapter,
grommet and all necessary fittings and accessories,
complete in all respects as per manufacturer’s specifications
and as directed by the Engineer-in-Charge.
Providing & Laying & jointing in true line level 110mm dia
U.P.V.C. SWR type B pipe confirming to IS 13592-1992 with
one end plain & other end socket with rubbering & Fixing
conforming to ISI 14735-1999 of approved make for drain
system pipe line, pipe shall be jointed with each other with
rubber lubricant, pipe shall be fixed on wall using PVC clamps
36 of the size 160mm dia x 210mm length x 196mm high at every 10.00 Rmt. 836.73
2000mm centre to centre or shall be concealed in wall as
directed necessary fittings such as bends, shoes, etc. incl.
testing of pipe & joint & jointed with adhesive solvent, cement
incl. cost of all material etc. complete as per detailed, directed
& approved by the consultant / EIC.
Providing laying and jointing in true line and level 15mm
dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings
as approved by Engineer In Charge. Pipe shall be fixed on the
37 wall with the help of clamp at every two metre C/C or shall 10.00 Rmt. 72.65
be concealed as directed including necessary fittings etc.
including testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
Providing laying and jointing in true line and level 25mm
dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings
as approved by Engineer In Charge. Pipe shall be fixed on the
38 wall with the help of clamp at every two metre C/C or shall 5.00 Rmt. 91.84
be concealed as directed including necessary fittings etc.
including testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
Providing laying and jointing in true line and level 40mm
dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings
as approved by Engineer In Charge. Pipe shall be fixed on the
39 wall with the help of clamp at every two metre C/C or shall 5.00 Rmt. 148.12
be concealed as directed including necessary fittings etc.
including testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
Providing laying and jointing in true line and level 50mm
dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings
as approved by Engineer In Charge. Pipe shall be fixed on the
40 wall with the help of clamp at every two metre C/C or shall 30.00 Rmt. 195.67
be concealed as directed including necessary fittings etc.
including testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
Providing & Laying & jointing in true line level U.P.V.C. SWR
type B pipe confirming to IS 13592-1992 with one end plain &
other end socket with rubbering & Fixing conforming to ISI
14735-1999 of approved make for drain system pipe line, pipe
shall be jointed with each other with rubber lubricant, pipe
shall be fixed on wall using PVC clamps of the size
160mm dia x 210mm length x 196mm high at every 2000mm
centre or shall be concealed in wall as directed necessary
fittings such as
Providing erecting and fixing double coated ISI water tank
42 of required capacity each with all necessary fittings and 10000.00 Ltr 3.95
connection etc. complete on terrace
Providing & Fixing gun metal check or no return full way
43 wheel valve etc. complete as per the instruction of EIC. (C) 25 1.00 Each 420.63
Providing & Fixing gun metal check or no return full way
44 wheel valve etc. complete as per the instruction of EIC. (E) 40 1.00 Each 663.43
Providing and fixing screw down bib taps of following size.(A)
45 Brass screw down bib tap polished bright. (i) 15mm dia. 2.00 Each 214.81
46 Providing and fixing brass screw down stop tap.(B) 20mm dia. 1.00 Each 223.81
Providing & Fixing PVC SWR Nahni trap IS 14735 for
drain- 100mm diameter with 150 mm X 150mm S.S.jali
for floor or nahni trap of the following nominal diameter of
47 self cleansing design with C.I screed down or hinged grating 2.00 Each 571.08
including the cost of cutting & making good the walls, as per
detailed, directed & approved by the EIC.
Providing and fixing S.W. gully trap with C.I. grating
brick masonry chamber and water tight C.I. cover with frame
48 of 300mm x 300mm size (inside) with standard weight.(i) 1.00 Each 1,292.19
Square mouth traps. (A) 100mm x 100mm size P type.
Constructing brick masonry chamber for underground C.I.
Inspection chamber & bends with bricks having crushing
strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover
with frame (Light duty) 455mm x 610mm internal
dimensions, total weight of cover with frame to be not less than
38Kg. (Wt. of cover 23 Kg.) & Wt. of frame 15Kg. ) (R.C.C.
top slab with 1:2:4 mix (1-cement :2- coarse sand :4-
49 graded stone aggregate 20mm size) foundation concrete 1.00 Each 2,932.93
1:5:10 inside plaster 15mm thick with cement mortar 1:3
finished smooth with a floating coat of neat cement on walls
& bed concrete for (i) Inside dimensions 455mmx 610mm
& 450mm deep for single pipe line. etc. complete as per
detailed, directed & approved by the consultant / EIC.
Constructing brick masonry manhole with R.c.c. top slab in
1:2:4 mix ( 1 cement : 2 coarse sand :4 grade stone aggregate
20mm size ) foundation concrete 1:3:6 mix ( 1 cement :
coarse sand :6 brick bats 40 mm size ) inside plaster 15mm
thick with CM 1:5 ( 1 cement : 5 Coarse sand ) finished
with a floating coat of neat cement & making channels in
cement 1:2:4 mix ( 1 cement : 2 coarse sand :4 stone aggregate
50 20mm nominal size ) finished smooth complete including 1.00 Each 19,330.46
curing & testing… ( I ) inside 900mm x 1200 mm & 1.5 m deep
including R.c.c. cover with frame size 560 mm diameter ( A )
with 230mm thick walls of brick masonry using brick having
crushing strength not less then 35 kg/sqcm in CM 1 : 5 (
cement : 5 coarse sand ), (2) B type depth 1.50 Meter for
150mm diameter sewer.. etc. complete as per detailed,
directed & approved by the consultant / EIC.
Providing & Fixing white colour, Vitreous china, under /
Over Counter wash basin with single hole for pillar type with
Cl or MS brackets painted white including cutting holes,
ranking bolts for Fixing & marking good the same,
including Fixing C.P. Brass waste coupling 32mm dia & Bottal
trap & 15mm dia pillar tap, Bottle Trap, as approved, capstan
51 head C.P. screwed down high pressure with screw shank & 1.00 Each 2,728.46
back nuts & rubber plugs, 15mm dia brass stop cock
(50/75mm p.v.c. Drain connection pipe, Water Connection Pipe
of required Size, & testing the same for leak proof, etc. with
all material & labours to complete this job in all respected
manners, etc. complete as per detailed & approved by the
consultant & directed by EIC.
Providing and fixing wash down water closet (European
type, W.C. Pan) with integral P or S trap including jointing
the trap with soil pipe in Cement Mortar 1:1 (1 - Cement
: 1 - Fine Sand) with plastic seat and cover for wash down
52 water closer with C.P. brass hinges, C.P. brass toilet paper 1.00 Each 6,076.82
holder, Jet Spray, Metropole flush valve Incl. Connection and
rubber buffers. (A) Vitreous China., etc. complete as per
detailed & approved by the consultant & directed by EIC.
Providing & Fixing C.P. brass towel rail Approved Make
complete with C.P. Brass brackets fixed to wooden plugs
with C.P. Brass screws,, etc. complete as per detailed,
53 directed & approved by the consultant / EIC. (B) 600mm x 20 1.00 Each 603.19
mm size, etc. with all material & labours to complete this job in
all respected manners, etc. complete as per detailed & approved
by the consultant & directed by EIC.
Providing & Fixing 600mm x 450mm beveled edge mirror
of superior glass mounted on 6mm thick A.C. sheet or
plywood sheet & Fixing to wooden plugs with C.P. brass
54 screws & washers, etc. with all material & labours to complete 1.00 Each 833.73
this job in all respected manners, etc. complete as per
detailed & approved by the consultant & directed by EIC.
55 Providing and fixing C.P. brass shower rose with 15mm or
20mm inlet.(A) 100mm dia. Each 1.00 Each 282.16
Providing & fixing office table / staff table having ht of
750 mm Top, with 19mm thk plywood Structure or with MS
Pipe Structure of Frame as per Architect/ Engineer Design or
Selection and Back and side Ply of table is also made up of
19mm Thick. Top of Table is 19mm thk ply with laminate
Finish Per Requirement and All internal & external
Joints finished with teakwood beading Patti. Item includes
fixing of drawers and keyboard tray and storage with shutters
56 under table as per drawing. With grooves shown as per 1.50 Smt 15,695.59
drawing. All exposed and internal surfaces covered with
Laminate Finish of approved shade & Complete as per
detail drawings & as instructed by Architect/consultant/
Engineer In charge. Complete with all necessary hardware
like nails, ss screws, table chain, TDS channel, adhesives
etc. Contractor has to provide all necessary cut outs for
Electrical works & no extra payment shall be made for it.
Storage with Shutter (Laminate FINISH)
Providing & fixing Any Height storage having Any size of
having depth of 350mm/450mm/600 mm, having skirting of
mm, with proper locks. includinf of vertical supports &
horizontal shelves shown as per drawing made by 19 mm thick
Marin ply, having shutters of 19 mm thick ply or Clear Glass
with using 12 mm thick Marin ply for framing. All complete
with proper teakwood beading. and Teakwood molding as
per design. Back ply is 12 mm Marin ply. All exposed are
57 covered with 1 mm thick Laminate & internal surfaces are 2.60 Smt 9,997.93
covered with 1 mm thick laminate. External & internal joints
covered with beading Patti complete with Polish finish. With
grooves shown as per drawing All complete with proper
hardware like locks, S.S. Screws, MS Nails, Magnets,
table chains, cable manager SS 304 Handles of 250 mm and
100 mm dia etc. All Details as per shown in detail drawings &
as per instructions of architect/consultant
/ in charge engineer
Supplying and providing High Back Mesh office Chair As per
specification below:
-Metal frame seat made of Mesh fabric upholstery (foam base)
-Adjustable Head rest
-Fixed Arm rest
-Knee tilt mechanism
58 -360 swivel motion/ 100mm stroke gas 1.00 Nos 10,738.07
-Nylon Star base
-Pushback mechanism & Comfy seating.
-Complete as per architectural design and concept and
approved by Architect & Client.
Supplying and providing Mid Back Mesh office Chair As per
specification below:
-Metal frame seat made of Mesh fabric upholstery (foam base)
-Center tilt mechanism
-100mm class 4 gas lift
59 -PP Fixed Arm rest 2.00 Nos 5,024.65
-Nylon Star base/Twin wheel nylons casters
-Complete as per architectural design and concept and
Architect & Client.
Waiting Sofa (Two Seater) : @ 1500(L) x 870 mm (B) x
800 mm (H) comprising up of Solid teak wood with PU semi
gloss finished polish. The seat shall 150 mm th 40 density
& back shall be 32 density foam & finished in Approved
fabric upholstery as per the drawing/image and instruction
from Architect/EIC all external & internal exposed woodwork
to be finished in PU semi gloss finish polish. .The work shall be
done as per drawing , specifications, sample approved and
60 as directed by the Architect and Engineer-in-charge. The 1.00 Nos 17,675.00
rate shall be for complete item inclusive of all material,
labour, wastages, necessary tools & tackles, approved make
for all floors, all heights, all levels and all places within
campus. Contractor shall do all the needful and shall
fulfill Architect's design intent. No additional claims will be
entertained for this. Rate shall inclusive of providing mockup
sample for approval of architect. Basic rate of fabric 800/
Waiting Sofa (Three Seater): 2100mm (L) x 870 mm (B) x
mm (H) comprising up of Solid teak wood with PU semi gloss
finished polish. The seat shall 150 mm th 40 density &
back shall be 32 density foam & finished in Approved
fabric upholstery as per the drawing/image and instruction
from Architect/EIC all external & internal exposed woodwork
to be finished in PU semi gloss finish polish. .The work shall be
done as per drawing , specifications, sample approved and
61 as directed by the Architect and Engineer-in-charge. The 1.00 Nos 24,745.00
rate shall be for complete item inclusive of all material,
labour, wastages, necessary tools & tackles, approved make
for all floors, all heights, all levels and all places within
campus. Contractor shall do all the needful and shall
fulfill Architect's design intent. No additional claims will be
entertained for this. Rate shall inclusive of providing mockup
sample for approval of architect. Basic
rate of fabric 800/ Rmt
Suppliying and spreading of graded stone aggregate of
following sizes (for W.B.M. Road)(1) Hand broken stone
62 aggregate 25mm to 63mm size including rolling and W.B.M. 739.00 Cmt 1,018.74
including filling the interstices to required camber and
gradient complete as per directed by EIC.
Providing and fixing complete shade-net house covering
system comprising UV-stabilized white mono-filament shade
net of suitable shade percentage, in required widths, GI
locking profiles/channels, galvanized high-carbon steel zig-
zag spring wire, self-drilling screws, zipper/access door, door
handles, hinges, locking clips/fasteners and all other necessary
63 accessories, including cutting, overlapping, stretching, 1920.00 Smt 277.75
tensioning, alignment and fixing of shade net to the existing GI
structural framework, complete with all labour, tools,
tackles, wastage and incidental works, as per manufacturer's
specifications and as directed by the Engineer-in-Charge.
Providing and fixing complete polyhouse covering and
accessory system comprising 200 micron UV-stabilized
multi-layer greenhouse polyfilm (GreenPro or equivalent),
insect-proof net, UV-stabilized white/shade net, polyhouse
apron/skirting, GI locking profiles, GI zig-zag spring wires,
self-drilling screws, zipper/access door with handle and
hinges, locking clips, nylon rope, GI support wire, pulleys and
64 all necessary fixing accessories, including cutting, 1000.00 Smt 378.75
overlapping, stretching, tensioning, alignment, fastening,
jointing, sealing and complete installation over the existing
galvanized steel polyhouse framework, including all labour,
tools, tackles, wastage and incidental works,
complete as per manufacturer's specifications and as
directed by the Engineer-in-Charge.
Providing, supplying and installing complete prefabricated
portable single seater toilet unit, comprising PUF insulated
sandwich panel walls and roof of minimum 40–50 mm
thickness with pre-coated GI sheet finish, MS/GI supporting
framework, complete toilet cabin including flush-type
Western WC/EWC with seat and cover, flushing system,
wash basin, CP tap, waste fittings, floor trap, PVC/UPVC
soil and waste-water piping, vent pipe, necessary plumbing
fixtures and fittings, ventilator/louver, door with frame,
hinges, tower bolt/locking arrangement and all required
hardware; including providing and constructing suitable
RCC/masonry septic tank with partition/baffle
arrangement, inlet and outlet connections,
inspection/manhole cover, vent pipe, soak pit/drainage
arrangement, connection from toilet to septic tank,
excavation, backfilling, testing, commissioning,
transportation, erection, installation and all labour, materials,
tools and accessories, complete in all respects as per approved
drawing and as directed by Engineer-in-Charge.
Point wiring for Light / Bell with 2-1.5 sq.mm & earth
wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 kV
grade FRLS PVC insulated multi strand copper wires up to
10 mtr length , in below type of pipe erected with 6A
Modular type switch / bell push & accessories and earth
continuity of following type, erected on PVC /
66 Metallic/Wooden box, single mounting base frame covered 14.00 Pt. 582.77
with textured/metallic/white front plate modules erected on /
in wall / ceiling as per pipe erected, with necessary Lamp
holder/ceiling rose / H.D.Connector as directed. (f) with
medium class Rigid PVC pipe and accessories erected
concealed in wall/ceiling completeCat. III
Point wiring for FAN with 2-1.5 sq.mm & earth wire of
1.5 sq.mm (Green) both are of .ISI marked 1.1 kV Grade
FRLS PVC insulated multi strand copper wires up to 10 mtr
length, in below type of pipe erected with 6A Modular type
switch and hum free EME step type electronic fan regulator
mounted and accessories with earth continuity of following
67 type erected on PVC / Metallic/Wooden box, single mounting 4.00 Pt. 809.01
base frame covered with textured/metallic/white front plate
modules erected on / in wall / ceiling as per pipe
erected. with necessary ceiling rose / H.D.Connector as
directed.(f) with medium class Rigid PVC pipe and
accessories erected concealed in wall/ceiling completeCat. III
Point wiring for Individual Plug with & earth wire of
sq.mm (Green) both are of ISI marked 1.1 kV grade FRLS
PVC insulated multi strand copper wires up to 10 mtr length,
in below type of pipe erected complete with Modular type
switch & 5 pin Plug erected on PVC / Metallic/Wooden box
covered with appropriate front plate modules erected on / in
68 wall / ceiling as per pipe erected with following type of 4.00 Pt. 612.06
accessories.[I] For 6A Plug and 6 a switch with 2-1.5
sq.mm Cu. Wire from nearby switchboard/mcb db
board(f) with medium class Rigid PVC pipe and
accessories erected concealed in wall/ceiling completeCat. III
69 Point wiring for on board Looped Plug with 6A Modular type
switch & 5 pin socket erected on PVC / Metallic/Wooden box,
single mounting base frame covered with textured / 1.00 Pt. 309.06
metallic/white front plate modules erected on / in wall / ceiling
with following type accessoriesCat. III
70 Providing following type of Modular Type Accessories
mounted with PVC
/ metallic/Wooden box, single mounting base frame
covered with textured / metallic/white front plate , modules 2.00 Ea. 160.59
erected with necessary connections as per site situation
directed by Engineer In charge.(3) Two
Pin/RJ-11 Telephone Socket, [A] For One Gang, Cat.III
71 (4) TV Co-axial Socket outlet, Cat.III 1.00 Ea. 160.59
72 (9) 16 Amp. SP one way switch , Cat.III 3.00 Ea. 180.79
73 (10) 6/16Amp. Universal socket, Cat.III 5.00 Ea. 199.98
Providing and erecting Mains with 1.1 kV grade FRLS
PVC insulated ISI marked stranded Copper conductor wire in
following type of pipe to be erected concealed in /flushed on
74 wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC 80.00 Mtr. 104.03
insulated stranded wire of green colour for earth continuity
of following size, (A) With medium class Rigid PVC pipe
and accessories , (b) 2 wire 2.5 sq. mm
Providing and erecting Mains with 1.1 kV grade FRLS
PVC insulated ISI marked stranded Copper conductor wire in
following type of pipe to be erected in / on wall / ceiling with
75 2.5 sq. mm copper conductor FRLS PVC insulated stranded 100.00 Mtr. 140.39
wire of green colour for earth continuity of following size, (A)
with medium class Rigid PVC pipe and accessories, (a) 2 wire
76 (h) 4 wire 6 sq. mm 5.00 Mtr. 326.23
Providing & Erecting approved make following size of TV Co-
axial flexible cable comprising inner conductor of solid bare
copper insulated with Foam PE & Secondary conductor made
of poly - Aluminium film bonded Al. Braids @ suitable
coverage overall sheathed with black PVC insulation.(b)
Supplying & erecting approved make Telephone Cable
electrolytic copper conductor PE insulation twisted in two pairs,
& wrapped with FRLS PVC tape & sheathed with FRLS
PVC or HFFR outer Jacket suitable for telephone wiring
& confirming to C-DOT erected in existing pipe. of
following size of conductors & nos.of pairs. With necessary
[A] Conductor Size 0.5 mm, (a) Unarmoured(2) Two Pairs
Supplying & erecting approved make LAN cable of
79 following size in existing pipe as per direction[C] CAT - 6 10.00 Mtr. 47.47
Providing & erecting Switch board for Computer or
electric apparatus consisting of following modular type
accessories mounted with PVC/ Metallic concealed/ open
box with single mounting base frame covered with textured/
metallic/ white front plate,modules erected with necessary
connections as directed
1 no. 6A/16A universal plug-switch combined. 3 nos. 6A
3 nos. 6A 5 pin Plug
For Modular Type Accessories Cat. III
81 Call bell gong type suitable for 230 volts, 50 Hz. AC
supply complete Erected 1.00 Ea. 42.42
Supplying and erecting LED indoor fittings with LEDs of
wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,
with housing used as a heat sink shall be made of thick
sheet Steel conforming to IS: 513/CRCA/ aluminium die
cast powder coated and high U.V. & corrosion resistance with
diffuser with company mark/name 160V to 270V, Power
Factor more than 0.95, THD < 15%, CCT 3000 K to 6500K,
82 Luminaire efficacy> 85 lumens/watt, LED LED driver 10.00 Ea. 373.70
efficiency > 85 % ( fitting required LM-79 & LM-80
Certificates) (NOTE: Below description have shown ranges
of Wattage capacity of LED fittings.The Engineer incharge
may select any wattage capacity between the ranges shown.)
(A) Tube Light with integral driver (iv) 22-24 Watts, Surge -
2KV,IP-20, conventional 4 feet, Cat.III
Supplying and erecting led lamps with following wattage
capacity of 220 to 240 voltage, minimum 15000 burning hours
life, 500 V in built-surge protection,Polycarbonate diffuser,
83 mounting suitable for E14 / E27 / B22 lamp holders, pf >= 1.00 Ea. 112.11
0.5, (A) LED Lamps integral type, with PC diffuser
suitable LAMP holder, (ii) 5 to 8 watts, Cat-III
Supplying and erecting LED indoor fittings with LEDs of
wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,
with housing used as a heat sink shall be made of thick
sheet Steel conforming to IS: 513/ CRCA/ aluminium
pressure die cast powder coated and high U.V. &
corrosion resistance with diffuser housed in aluminium casted
body with company mark/ name
160V to 270V, Power Factor more than 0.95, THD < 15 %,
84 CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt , 5.00 Ea. 589.84
LED driver efficiency > 85 % ( fitting required LM-79 &
LM-80 Certificates)(NOTE: Below description have shown
ranges of Wattage capacity of LED fittings.The Engineer
incharge may select any wattage capacity between the ranges
shown.) (A) Square/ Circular shaped Surface/Recessed
Mount Downlight with provision for spring loaded
mounting clips complete.IP20, (iii) 16-20 watts, Surge-2
Providing and erecting Miniature circuit breaker single pole
0.5A to 2A system and having breaking capacity 10 KA
85 to be erected in existing box. confirming to IS 8828/1996 1.00 Ea. 297.95
with ISI Mark , Cat-III
Providing and erecting Miniature circuit breaker single pole
6A to 25A suitable to operate on 240 V A.C. system and
86 having breaking capacity 10 KA to be erected in existing box. 5.00 Ea. 123.22
confirming to IS 8828/1996 with ISI Mark, Cat-III
Providing & erecting 415 V MCB Four Pole for Motor &
Inductive Load (C Curve) having 10KA breaking capacity &
87 confirms to IS :8828 in existing 1.00 Ea. 811.03
box having following capacity (c)63 Amp. Cat-III
Providing and erecting Sheet Steel powder coated MCB
distribution board flush / surface mounted fitted with
busbar, neutral link, earth bar and DIN rail, Conforms to IS
8623-1 & 3, IEC 61439-1 & 3 without MCB to house
appropriate nos. of MCBs.(The DBs should be used of
same company of MCB to be used) suitable for, (A) single
phase incoming and horizontal single phase outgoing, (a) single
door (IP-30)(i)4 way
89 (B) three phase incoming and single phase horizontal type
outgoing Per phase isolation type (PPI)(b) sheet steel double 1.00 Ea. 2,913.85
providing and erecting Approved make RCCBs conforming
to IS: 12640 and having sensitivity of 30 mA and Short
Circuit withstand capacity of
10 KA and suitable for operation on single phase
90 V,50Hz. having characteristic of quick action & tripping with 1.00 Ea. 2,458.34
all advance feature & do not incorporate any electronic
component. for following Max. rating erected
as directed, (ii) 40Amps. DP Cat. III
91 Providing and erecting Annealed bare Copper wire
Providing and erecting Pipe type earthing having
cms.long and 2.5 cms. dia. galvanised iron pipe with coupling
92 and buch buried in specially prepared earth pit complete with 2.00 Ea. 368.65
necessary 8 SWG earth wire.
93 For using salt and charcoal / coke as required for pipe type
earthing. 2.00 Ea. 171.70
Supplying & erecting earth pit of minimum bore
dia.150mm size approved make Earthing Electrode consisting
Pipe-in-Pipe Technology as per IS 3043-1987 made of
corrosion free hot dipped G.I.Pipes having Outer pipe dia
of 50mm having 80-200 Micron galvanising, Inner pipe dia
of 25 mm having 200-250 Micron galvanising, connection
terminal dia of 12mm with constant ohmic value surrounded by
highly conductive compound with high charge dissipation
suitable for following type of applications with chamber and
heavy duty cover. (A)(approved make OEM has to submit
test certificate including value of earth resistance of
installation duly stamped and signed by agency and officer
94 Incharge has to ensure the value of earthing resistane mentioned 1.00 Ea. 4,591.46
in test Certificate) & having back filling compound of (B)
Inner chemical (CCM Compound)-Resistivity:- 0.2 ohm /
meter testing as per IEC 62561-2017, Voltage drop:- <
volt at no load & dry form, Sulphar content:- <2%(C) Back fill
Compound :- Earthing compound should be capable to retain
moisture for long time Necessary test report must be submitted
by Agency. (a) For Electrical Installation up to 440V in normal
Length of pipe - 1 Mtr
Back filling compound - 1 Nos Bag of 15 Kg.
95 Providing and erecting FRLS-XLPE(IS:7098)(I)-88 ISI
armoured cable Aluminium conductor for 1.1 kV. to be
laid on wall with necessary clamps or in existing trench / 5.00 Mtr. 112.11
pipe of following size of cables. (B) 2 core
96 Providing and, fixing heavy duty flange type brass cable
gland with rubber ring for PVC insulated armoured cable
complete with out going tails, insulating tape etc for following 2.00 Ea. 38.38
size of cables.(B) 2 to 4 core 6 Sq.
97 Solder less crimping type Aluminium lugs conforming to
IS suitable for cable of following size evenly crimped
with high pressure tool & connected to switchgear 8.00 Ea. 6.06
terminals with brass/ cadmium plated nut bolts in an approved
manner.(A) 1.5/ 2.5/4/6 Sq.mm
98 Providing and erecting Approved make Ceiling fan with
double ball bearing ISI mark with condenser A.C. 230V.50
Hz.1200 mm. sweep complete, canopy erected on existing 4.00 Ea. 1,596.81
hook or clamp with earthing. [Make shall be approved by
Engineer in charge]
99 Supplying and erecting 19 / 20 mm. nominal bore
Medium Class M.S. Pipe down rod erected duly painted
for fan complete with proper insulation without leakage
Supplying & erecting fan hook box of 10 mm M.S. round bar
bounded to the RCC bars up to 50mm length each side
100 and pierced through a 16 Gauge M.S. box / Heavy Duty 4.00 Ea. 108.07
PVC box complete erected concealed in Ceiling with
necessary finishing.
101 Supplying & erecting single phase approved make industrial
exhaust fan suitable for medium duty ring mounted low noise
operation suitable for medium duty having following dia size 1.00 Ea. 2,054.34
and maximum speed in RPM, [A] 300-305 mm dia 900 RPM,
102 Supplying and erecting B class galvanised iron pipe 32 mm
outside dia 45 cm long duly welded on 20 cm x 20 cm x 3 mm
thick M.S. base plate, erected on wall or corner for 1.00 Ea. 343.40
mounting street light luminaire with necessary hardware
materials duly painted.
Total Amount Rs. =
Total Amount Rs. =
I/We am/are willing to carry out the work @............ % above/below percent ( should be written in
figures & Words) of the estimated rates mentoined above . Amount of my/our tender work out as
Estimated amount put to tender Estimated amount put to tender
Deduct % below Add……………………..……..% above
IN words IN words
(Please strike out whichever is not applicable.)
1 The Contractor shall exhibit a board with detailed specification and details of work as directed by
2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3 GST and Income tax TDS will be deducted at a source while making payments of bills
In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.
G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in
4 R.C.C. items where there is a change as per actual mix design the cost of difference of cement
consumption have been deducted from the rate of original item at the rate of input rate mentioned
in all the tender.
Signature of Contractor with Seal Signature of Contracting Authority
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
Building-Specification Booklet.pdf
scheduale B pdf.pdf
7 GR 1-133 Pg Final 2 side.pdf
SBD Rajpuri Hi Tech Nursery pdf.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .