Supply, installation, testing and commissioning of Central Heating System for the Education Centre cum Library at village Saspol.

Supply, installation, testing and commissioning of Central Heating System for the Education Centre cum Library at village Saspol.

ELECTRIC BOILER 100KW Hot Water Generator with cable 3.5 Core × 150 sq.mm 50 mtr Aluminium XLPE, PVC Sheathed, Armoured, 1.1 kV Grade CableSupply, Installation, Testing and Commissioning (SITC) of 100 kW Electric Hot Water Generator (Electric Boiler), vertical shell type, stainless steel construction, complete with control panel, SCR controller, digital thermostat, safety devices, insulation, accessories, and power cabling up to the transformer. The pressure vessel shall be designed for a working pressure of 6 kg/cm² (6 bar) and hydraulically tested at 9 kg/cm² (9 bar) or 1.5 times the design pressure, whichever is applicable, in accordance with the Indian Boiler Regulations (IBR), where applicable, or relevant IS/ASME standards insulluted with 10mmm resin bounded thick fiber glasswool 32kg/Mcube,cladded with 0.8mm aluminium sheet, voltage 240+10% per phase, 3 phase. control Digital step controllar/thermostat for individual steps, digital type thermometer for inlet,outlet pipe,with temperature setting , SCR base linear controler for hot water generator. SAFTY- Float switch, auido/visual alarm for low level and high temperature, pressure relief valve, door switch, safty thermostat complete job.

Pumps Brine circulation Monobloc Pump with 2hp single phase size 50x40mm mechanical seal with 3.9 lps at 20 Mtr Supply, installation, testing & commissioning of monoblock centrifugal pump driven by suitable capacity electric motor and mechanical seal bearing temperature upto 90 ºC for ethylene glycol of 20 Mtr head complete with accessories including cement concrete foundation and all as specified and directed of following flow rates (Makes: Grundfos / Wilo/ Salmson,Franklin)

Monobloc pump 1hp for brine feeding . (complete fitting with the expension tank with 20mm MS pipe).

Tanks Day Oil Tank Day oil storage tank. Supply, installation, testing and commissioning of Kerosene/ HSD Day service Tank rectangular MS (IS2062) construction with capacity of 990 Litres complete with inlet, outlet, overflow, drain and vent with flame arrestor,Tank will be made out of 4 mm MS sheet with supporting made out of minimum 50mm NB class ‘B’ pipe to keep tank base at minimum(1000mm) above FFL service platform will be provided.The tank should be provided with remote indications and level switches for on-off operation of transfer pump. Extra high level and extra low level alarm should be provided .Tank and structure will be painted with two coats of red oxide paint and duly painted.

Expansion Tank Expansion tank/over Head tank . HDPE (tripple layer) with necessary connection , Insulation and Al.Cladding. The job also includes steel structure of suitable height to be placed at roof top and connected with 25mm ms pipe. Capacity 100 litres.

Hot Water Radiators confirming to EN442 standaeds. "Steel panel heating radiators conforming to EN442 standard, working pressure ranging from 10-13 bar having working temperature at 110°C ,complete with Top grilles and side covers as standard alongwith inlet valve, outlet valve, air purge valve and threaded plug as per OEM. Inlet Water Temp: 70˚C Outlet Water Temp: 65˚C Room Temp: 24+-2˚C " Type22 Convector 600mmx 2200mmfitted with supply and return valves.

Type22 Convector 600mmx 700mmfitted with supply and return valves.

Piping Supply/Return Piping "SITC of Heavy Duty MS Class ""C"" Pipes insulated with 2"" thick Glass wool of density 16Kg/M³ or 1"" thick Nitrile foam with aluminium cladding and including all fittings like steel brackets for suspended pipes,fasterers, flanges, TEE, Bends, Reducers etc. 50mm

40mm