Construction of Water Supply distribution network, compound wall with all necessary components for Ode Industrial Estate. (Re-invited)

Sr.No Description Qty Unit Rate Amount

BOQ Compound wall:- Excavation for foundation up to 1.5 mt depth incl. sorting out & stacking of useful 1806 Cumt. 122.94

1 material and disposing off the excavated stuff upto 50 Meter lead(A) Loose or soft soil

2 Excavation for foundation 1.5 to 3.0 mt depth incl. sorting out & stacking of useful material incl. dressing 1476 Cumt. 136.30

of sides & ramming of bottom incl. sorting, pumping out water if required incl. trench refilling in layers not

exceeding 20 cm in layer & watering, ramming etc. with all required lead & lift etc. complete. – In all sorts

of soil and soft murrum.

3 Providing and laying rubble for apron (each stone weighting not less than 40Kg.) including and packing 317 Cumt. 1083.81

and filing in the interstices with quarry-spalls.

4 Providing & laying CC 1:3:6 (1- cement : 3 -coarse sand : 6- M/c stone aggregate 20 mm nominal size) in 151 Cumt. 3270.55

foundation concrete incl. machine mixing, ramming, consolidation & curing etc. complete incl. cost of form

work if required etc.

5 Providing & laying controlled cement concrete M-250 exposed work for RCC works incl. machine mixing, 265 Cumt. 4640.66

vibrating, scaffolding, curing incl. cost of form work but excluding cost of reinforcement etc. complete at

all levels for (i)Footing

5. ii COLUMN 174 Cumt. 7358.22

5 iii PLINTH BEAM 210.00 Cumt. 6194.63

5.iv COPPING 35 Cumt. 5775.07

6 Providing Thermo Mechanically Treated bars (TMT bars) FE - 500D for RCC work including cutting, 72600 Kg 77.29

bending, binding, hooking, tying and placing in position as per detailed drawings incl. cost of binding wire

etc. complete at all levels.

7.i Brick work using common burnt clay building bricks of IInd class having crushing strength not less than

kg/cm2 for foundation & plinth and superstructure up to two floor level in C.M. 1:6 (1-cement : 6-coarse

sand) incl. racking out joints 20mm deep to expose faces & the joints should be struck flush to expose faces

incl. Curing, scaffolding etc. complete. (i) In foundation For SUBSTRUCTURE

7.ii FOR SUPERSTRUCTURE 645 Cumt. 4496.05

8 P/L 20mm thick sand faced plaster on wall upto any height consisting of 12mm thick backing coat of 6575 M2 352.44

cement mortar 1:3 (1-cement, 3 sand) & 8mm thick finishing coat of cement mortar 1:1 (1-cement, 1-sand)

9 External wall painting (two coats of priming coat + two coats of paint) with APEX exterior paint of Asian 6575 M2 140.56

paints or equivalent of required shade or equivalent including a priming coat of primer of approved brand

and manufacture on wall & any other surfaces to give an even shade after thoroughly brushing the surface

& making the surface free from mortar droppings and other foreign matter and sand papered smooth incl.

filling the all small holes, cracks, open joints, undulations and similar other minor defects of every kind

with ready made putty of approved brand and manufacture and rubbed smooth with sand paper incl. nece.

scaffoldings etc. complete at all floor levels

10 Providing and fixing iron compound gate as per design and given drawing with bolts nuts, locking 576 Kg 91.97

arrangements, stoppers, holdfasts, handles, aldrops etc. incl. cost of welding, cutting etc. using the M.S.

pipes (Heavy duty), angles, flats etc. as per drawing incl. fixing in RCC. column etc. incl. applying a

priming coat of red lead paint and three coats of approved synthetic enamel paint etc. complete.

11 P/F glazed stoneware pipe 150mm dia. in brick wall etc. making joints air and water tight with cement 3.00 Rmt. 317.47

mortar 1:1 laid to proper grade incl. making holes of required sizes, filling and finishing the same after

fixing pipe etc. complete

12 ESR- 3.50 Lacs litre capacity. Designing structurally (and aesthetically) complying provisions of relevant 1.00 Nos. 3989106.12

Indian standards and constructing RCC Elevated service Reservoir of the following capacity and height

using data of S.B.C of proposed site, Seismic zone, Wind speed Zone. Including(1) Container shape any

suitable type(strictly as directed by Engineer in Charge), 2) Staging consisting of column brace

trestle / shaft / combination column- brace trestle and shaft as appropriate(as directed by Engineer in-

charge)(3) Appropriate foundation system. This includes excavation in all types of soil strata (including

hard rock), casting100 mm thick P.C.C. levelling course in M-10 , Refilling the pit with proper soil and

disposing of the surplus stuff within Estate as directed by Engineer in Charge.(4) This will also include

cement plaster in CM 1:2 with approved water proofing compound all over inside face of container.(5) All

types of labour & material charges of lowering, laying, erecting / hoisting & joining of pipe assembly of

Inlet, Outlet pipe with Air Vent Pipe above FSL, overflow pipe, washout and bye pass arrangement as per

typical Schematic Drawing and instruction of Engineer in Charge & hydraulic design and including All

required valves and chambers for the same(6) Providing and fixing accessories (specified) like SS Ladder

CI Manhole frame and covers, water level indicator, lightening conductor, SS Pipe railing around walk

way, at roof level, at gallery and around landing of inside shaft, adequate cowl type ventilators or lantern

type ventilator with stainless steel jali.(7) Scope of work includes constructing RCC spiral staircase with

adequate tie beams,staircase footing, RCC chambers for valves. ventilating shaft and ventilators as well as

door in shaft.(8) Including providing and applying three coats of cement Paint (as specified) to the whole

structure.(9) It also includes satisfactory water tightness test as per relevant I.S. Code and painting name of

scheme & capacity on the tank as per direction of engineer in charge.

ESR at Utility Plot No:20

13 UG Sump:- 35.00 lacs litre capacity. Preparing structural design of RCC Under Ground / Partially under 1.00 Nos. 7432363.66

ground / above high ground level Reservoir of Rectangular Shape and of required capacity as per relevant

I.S. and constructing the same, including excavation in all types of soil strata (including rock) including

shoring strutting if required, for loose soil / to protect from collapse due to near by traffic load, casting

mm thick P.C.C. leveling course in M-15, Refilling the pit with proper soil and disposing of the surplus

stuff at all lead. Including cement plaster in CM 1:2 with approved water proofing compound to all over

inside surface of container. Including all types of labour and material charges of lowering, laying, erecting /

hosting and jointing of pipe assembly to inlet, outlet overflow, washout and bye pass arrangement as per

hydraulic design.Providing and fixing accessories like MS / GI Ladder, CI Manhole frame and cover, water

level indicator, adequate cowl type ventilators or lantern type ventilator with stainless steel jali.

RCC chambers for valves. Providing and applying three coats of cement paint / snowcem to the out side

face of structure. It also includes satisfactory water tightness test as per relevant I.S. code and painting

name of scheme and capacity on the tank as per direction of engineer in charge.

Sump at utility plot no 20- capacity 3500000 Liters

14 Pump Room:- ( 12x8x6.5 m) Designing(aesthetically) and constructing RCC frame structure Pump room 96.00 Sqmt. 16100.20

& Panel Room as decided by Engineer-In-Charge with positive & Negative section With Gantry in pump

room including doors & windows of aluminium section and window grill of iron, rolling shutter etc.

complete up to floor to height 6.50 m in pump room & same height in Panel Room Pump Room Floor is

IPS with Iron Ore Hardner& Panel room Floor is Mirror Polished Kotastone of min. cut Size of 16" x

22".It also includ RO Water Purifier System and Mirror Polished Kota stone Snadwiched Granite Platform

of total 6 m length x 0.75 m width with Mirror Polished KotstoneSndwiched single piece Supports spaced

as directed by Engineer in Charge With Ceramic Sink at each Pumping Station. Ladders and Railings with

vertical Posts at All the Pumping station shall be of SS 304 Material Including Toilet with Septic Tank

&Soakpit& 1000 litre HDPE water storage tank & their required connections.

15 Internal Distribution Network :- Providing, supplying, lowering, laying and jointing DI pipes for following

nominal bore diameter with internal lining including all taxes, insurance, transportation, freight charges,

octroi, inspection charges, loading, unloading, conveyance to departments store, stacking ; lowering, laying

and jointing for tyton joints with CI/MS specials in proper position, grade and alignment as directed by EIC

including hydraulic testing including excavation for pipe line trenches for pipe with shoring and strutting if

required as per required gradient and line including safety provisions using site rails and stacking excavated

stuff including up to all required lead, cleans the site etc. complete for all lift and strata and refilling the

pipeline trenches incl. ramming, watering, consolidating and disposal of surplus stuff as directed within a

radius of 3 km. etc. complete. For Following Nominal Diameter DI-K7 Pipes (1) 100 mm dia pipe

15.1 100 mm dia pipe 606 Rmt 1221.05

15.2 150 mm dia Pipe 1248 Rmt 1730.00

15.3 200 mm dia Pipe 222 Rmt 2184.39

15.4 250 mm dia Pipe 432 Rmt 2815.53

15.5 300 mm dia Pipe 324 Rmt 3522.97

15.6 400 mm dia pipe 48.00 Rmt 5125.45

Providing ,supplying and fixing C.I. air valves of approved make and quality of following class and

diameter including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading

16 unloading , conveyance to departmental stores, stacking etc complete and lowering , laying and jointing.

Kinetic Air valve –DK- 80 mm dia

Providing & erecting Ductile Iron D/F sluice valves as per IS 14846(latest edition) with ISI Mark (PN-1.0

with gear operated (PD type short body) as Isolation Valves with jointing to pipe work (including all

hardware and packing) water quality as per requirement, including providing and fixing expansion Bellow.

Hydraulic tests certificate & certificate of material of construction of parts shall be submitted before

despatch of valve of following class and diameter including all taxes, insurance, transportation, freight

charges, octroi, inspection charges, loading, unloading, conveyance to site, stacking etc. complete rate for

sluice valve including followings but Without Actuator. Also, including SITC of expansion bellow of

corrogate design, stainless steel expansion bellows with flanges, 15 mm axial movement having tie rods,

nuts etc. complete of same dia including all taxes, insurance, transportation, freight charges, octroi,

inspection charges, loading, unloading, conveyance to site, stacking etc. complete rate for sluice valve

including fixing in position.

17.2 150 mm dia 5 Nos 6433

Construction of valve chambers in RCC M-25, top of precast RCC Slab 100mm thick(with key hole in two

parts, each with handles or MS bar etc. complete as given size) upto 1 mt. depth from G.l to pipe invert

18 level etc complete

18.1 Size 1.3 × 1.3 × 1.0 m (Valves chamber) (400) 1 Nos 11351

18.2 Size 0.9 × 0.9 × 1.0 m (Valves chamber) (250 to 100) 11 Nos 7738

Size 0.6 × 0.6 × 1.0 m (AV chamber) 5380

Drilling of horizontal bore hole for water main pipe line under the Road in all strata with required length

including fixing of M.S casing pipe of suitable size and thickness. Rate includes the cost of drilling of bore

19 hole. Casing pipe & welding pushing etc complete but excluding cost of water main, Valves and other

items. Entire work should be as per approved drawing and as per instruction of authority for following 32 Rmt 9166

diameter of bore hole. for MS Pipe.

(1)Drilling 600 mm dia & MS Casing Pipe-500 mm dia.(For 400 to 300 mm Dia pipe)

Supply and Installation of Double Valves Type Underground Cast iron fire hydrants with all fixtures &

20 specials as and where directed by engineer in-charge. including all taxes, loading, carting, unloading, 3 Nos 6473

stacking, insurance, octroi, inspection charges etc. complete.

Design, Supply, Installation, Testing, Commissioning of Full Bore Electromagnetic flow meter with factory

calibration, Inbuilt Battery Power Operated, flanged connection, Flow sensor, Indicator, transmitter and

totaliser with all accessories viz. surge arrestor, associated cables, cabinets, hardwares, etc complete as per

following specifications:

(i)Flow Meter/ Sensor:DC pulsed type, IP 68 Protection, Flanged process connection as per IS 1538 or

equivalent standard, SS304/ Metallic Alloy Flow Tube, SS316/ SS 316 L/ Hastelloy Sensor, SS316/

21 Hastelloy Grounding Ring/ Inbuilt Grounding Electrode, Neoprene/Polyurethane/ Hard Rubber/ Rilsan 1 Nos. 278633

lining, SS304/ Die Cast Aluminium/ Carbon steel with Anticorrosive Paint Coil Housing with Junction

Box, CS flanges.

(ii)Flow Transmitter/ Converter ( Remote Field Mounted):Microprocessor based, Modular design, 2 line

LCD for indication of actual flow rate, forward, reverse, sum totaliser display, ±0.5% accuracy at 0.3 to

m/sec velocity, one scalable pulse/ one status, one Modbus output, one GPRS/ GSM output, IP

protection, Die cast aluminium/polycarbonate/ SS316 with Anticorrosive Paint/ PU finish with glass

window enclosure, Inbuilt EEPROM and Data Logger, 20 meters cable length for sensor to transmitter

communication, Minimum 5 years battery lifetime, 3.6 VDC Non Rechargeable Lithium-thionyl chloride/

Ni-Cd high power batteries, Hourly Basis Worldwide transmission of measured data and events via e‐mail

and SMS by integrated GSM/GPRS modem, Reliable data storage facility through integrated SD card

etcalongwith wall mounted/ stand mounted cabinet.

22 Providing, supplying, lowering, laying and jointing ISI mark heavy duty GI pipes with couplings of 145 Rmt. 163.72

following nominal diameter including all taxes, insurance, transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance to departments store, stacking ; lowering, laying and jointing with

GI specials in proper position, grade and alignment as directed by EIC including conveyance to site of

work, labour, giving hydraulic testing including excavation for pipe line trenches for pipe with shoring and

strutting if required as per required gradient and line including safety provisions using site rails and

stacking excavated stuff including up to all required lead, cleans the site etc. complete for all lift and strata

and refilling the pipeline trenches incl. ramming, watering, consolidating and disposal of surplus stuff as

directed within a radius of 3 km. etc. complete.

For Following Nominal Diameter GI (1)15 mm dia pipe

22.2 20 mm dia Pipe 135 Rmt 198.74

22.3 25 mm dia Pipe 345.00 Rmt 263.63

22.4 32 mm dia Pipe 200 Rmt 323.35

22.5 40 mm dia Pipe 290 Rmt 378.91

22.6 50 mm dia Pipe 250 Rmt 521.51

22.7 65 mm dia Pipe 1145 Rmt 654.29

22.8 80 mm dia Pipe 636 Rmt 814.26

22.9 100 mm dia Pipe 1058 Rmt 1133.28

Providing & erecting Ductile Iron D/F sluice valves as per IS 14846(latest edition) with ISI Mark (PN-1.0 with

gear operated (PD type short body) as Isolation Valves with jointing to pipe work (including all hardware and

packing) water quality as per requirement, including providing and fixing expansion Bellow. Hydraulic tests

23 certificate & certificate of material of construction of parts shall be submitted before despatch of valve of

following class and diameter including all taxes, insurance, transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance to site, stacking etc. complete rate for scour valve including followings

but Without Actuator. Also, including SITC of expansion bellow of corrogate design, stainless steel expansion

bellows with flanges, 15 mm axial movement having tie rods, nuts etc. complete of same dia including all taxes,

insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to site,

stacking etc. complete rate for sluice valve including fixing in position.

(1) 100 mm dia 5 Nos 4002

2) 80 mm dia 5 Nos 3052

3) 65 mm dia 10 Nos 2759

4) 50 mm dia 7 Nos 2316

Providing, supplying and fixing in position gun metal stop valves including all fixtures &specials as

24 and where directed by Engineer in Charge.

32 mm dia 21 Nos 520

25 mm dia 30 Nos 457

20 mm dia 27 Nos 322

15 mm dia 29 Nos 276

Design, Supply, Installation, Testing, Commissioning of Horizontal Inferential Multijet Type Water Meter,

Brass/ Bronze body material, totalizer made of copper can/ suitable anti corrosive metallic material, totaliser

metalic shall have 5 mm thick glass cover suitable against antifraud attempts, Thread End process connection,

IP 68 protection class, AMR Water Meter, Dry dial, magnetically coupled, water meters complete with tubular

strainer, brass nuts and nipples, ISO 4064 : 2005 with valid CE mark or ISI mark, mentioning notified body

number along with MlD / OIML / ISO certification from a recognized International laboratory.

Design, Supply, Installation, Testing, Commissioning of Woltman type Bulk Water Meter, CI/ Brass/ Bronze

body material, totalizer made of copper can/ suitable anti corrosive metallic material, totalisermetalic shall

have 5 mm thick glass cover suitable against antifraud attempts, Flange End process connection, IP

26 protection class, Woltman type Water Meter with removable mechanism, magnetic drive, dry dial, and be

fitted with a low mass rotor which is parallel to the direction of waterflow and exhibits dynamic thrust relief,

water meters complete with T Type strainer, ISO 4064 : 2005 with valid CE mark mentioning notified body

number along with MlD / OIML / ISO certification from a recognized International laboratory

Manufacture, supply, delivery and Erecting of Chemical fabricated RCC Precast chambers with foot

rest, top cover as per specification and drawing attached with the tender documents for sizes as

27 mentioned below. The delivery of chambers with clamps, nuts, bolts and locking arrangement

(without lock) is to be made to GWSSB store or sites any where in Gujarat. The rates includes all

taxes, loading, carting, unloading, stacking, including all taxes.

60 x 60 x 90 cm deep (Suitable to 80 to 300 mm dia pipes)

Drillinig of 250 MM dia Pilot Borehole in all strata by Direct Rotary Rig from 0.00 to 300.00m depth

Electrologger Charges (With Carting)

Reaming of 250/300 Pilot bore hole including Assembling, Lowering housing casing, strainer pipes, gravel

packing, clay packing etc complete: Size 550mm

Supply of Best quality of well sorted sevaliya gravel of size 4mm to 6mm.

Supply of Clay ball of size 25mm to 50mm from sticky clay at site of work (As certified by Hydrologist)

Supply of Cement

Cement Sealing if necessary without cost of cement by means of mud pump.

Lowering and removing of 100mm diadroopline and 32mm dia airline for development of each waterbearing

zone come across up to full depth of deep tube well of size 250mm for the tube well having depth 140mtr and

above through suitable air compressor. The job is for complete period of development of tube well. (Without

charges for air compressor.)

900 CFM/200 PSI (above the depth of 150 mtr.) The air compressor should run minimum discharge which ever

Manufacture, supply and dilivery of ISI marked UPVC 10 kg/cm² pipes conforming to IS:4984 with latest

amendment rates are exclusive of GST,250mm dia

Manufacture, supply and delivery of cage type Trapezoidal shape ('V') wire wound low carbon, galvenized

39 screen pipe and stainless steel screen pipes, confirming IS 8110 Rates are exclusive of GST. E) 250mm Dia 300 Rmt 3058

Heavy 1) 1.00mm Slot size

Clamp made from M.S. plate with 3 holes on either side with nuts & bolts of std. make and suitable size. I) 900 x

100 x 16 mm flat suitable for 300 mm dia. Pipe

Bore plug having 100 mm height made from M.S. plate with 3 holes at equal distance on circumference for nut-

41 bolts type, locking arrangement with nuts-bolts & lock nuts of std. make complete. From 5 thick M.S, plate (for 3 Nos 1150.12

top also) iii) Suitable for 250 mm dia Pipe.

M.S. Bail plug having length 0.45 mtr from medium class pipe as per I.S.S. suitable for C0 250 mm dia pipe.

Steel bent plate suitable to ERWpipe as detailed below C0 250 mm dia. 200 x 150 x

Madium duty M.S. coupling as per I.S. specification of following size iii) 300 mm dia.

Providing, supplying, lowering, laying and jointing DI pipes for following nominal bore diameter with internal

lining including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading,

unloading, conveyance to departments store, stacking ; lowering, laying and jointing for tyton joints with DI

specials in proper position, grade and alignment as directed by EIC including hydraulic testing including

45 excavation for pipe line trenches for pipe with shoring and strutting if required as per required gradient and

line including safety provisions using site rails and stacking excavated stuff including up to all required lead,

cleans the site etc. 3 % Wastage complete for all lift and strata and refilling the pipeline trenches incl. ramming,

watering, consolidating and disposal of surplus stuff as directed within a radius of 3 km. etc. complete. For

Following Nominal Diameter DI-K9 Pipes

46 Providing, Supplying and fixing C.I air valves of approved make & quality of following class and diameter

including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading,

conveyance to departmental stores, stacking etc. complete. & Lowering ,laying and jointing.(RA)

Kinetic Air Valve (DK) 80 mm dia

Kinetic Air Valve (DK) 50mm dia

Providing & erecting Ductile Iron D/F sluice valves as per IS 14846(latest edition) with ISI Mark (PN-1.0 With

Hand wheel /cap operated (PD type short body) as Isolation Valves with jointing to pipe work (including all

hardware and packing) water quality as per requirement, including providing and fixing expansion Bellow.

Hydraulic tests certificate & certificate of material of construction of parts shall be submitted before despatch

of valve of following class and diameter including all taxes, insurance, transportation, freight charges, octroi,

inspection charges, loading, unloading, conveyance to site, stacking etc. complete rate for sluice valve including

followings but Without Actuator. Also, including SITC of expansion bellow of corrogate design, stainless steel

expansion bellows with flanges, 15 mm axial movement having tie rods, nuts etc. complete of same dia including

all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance

to site, stacking etc. complete rate for sluice valve including fixing in position.

Construction of valve chambers in RCC M-25, top of precast RCC Slab 100mm thick(with key hole in two

48 parts, each with handles or MS bar etc. complete as given size) upto 1 mt. depth from G.l to pipe invert level etc

48.1 Size 1.3 × 1.3 × 1.0 m (Valves chamber) (400) 1.00 Nos 11351

48.2 Size 0.9 × 0.9 × 1.0 m (Valves chamber) (250 to 100) 6.00 Nos 7738.00

Design, Supply, Installation, Testing, Commissioning of Full Bore Electromagnetic flow meter with factory

calibration, Inbuilt Battery Power Operated, flanged connection, Flow sensor, Indicator, transmitter and

totaliser with all accessories viz. surge arrestor, associated cables, cabinets, hardwares, etc complete as per

following specifications: (i)Flow Meter/ Sensor:DC pulsed type, IP 68 Protection, Flanged process connection as

per IS 1538 or equivalent standard, SS304/ Metallic Alloy Flow Tube, SS316/ SS 316 L/ Hastelloy Sensor,

SS316/ Hastelloy Grounding Ring/ Inbuilt Grounding Electrode, Neoprene/Polyurethane/ Hard Rubber/ Rilsan

lining, SS304/ Die Cast Aluminium/ Carbon steel with Anticorrosive Paint Coil Housing with Junction

Box,CSflanges.(ii)Flow Transmitter/ Converter ( Remote Field Mounted):Microprocessor based, Modular

design, 2 line LCD for indication of actual flow rate, forward, reverse, sum totaliser display, ±0.5% accuracy at

0.3 to 4 m/sec velocity, one scalable pulse/ one status, one Modbus output, one GPRS/ GSM output, IP

protection, Die cast aluminium/polycarbonate/ SS316 with Anticorrosive Paint/ PU finish with glass window

enclosure, Inbuilt EEPROM and Data Logger, 20 meters cable length for sensor to transmitter communication,

Minimum 5 years battery lifetime, 3.6 VDC Non Rechargeable Lithium-thionyl chloride/ Ni-Cd high power

batteries, Hourly Basis Worldwide transmission of measured data and events via e‐mail and SMS by integrated

GSM/GPRS modem, Reliable data storage facility through integrated SD card etcalongwith wall mounted/

stand mounted cabinet.

Total (Technical Sanction

I /WE agree to carry out the work at ______________________ % above the estimated tender rates

___________________________________________ should be written in figures and words.

I / We agree to carry out the work at ______________________ % below the estimated tender rates

___________________________________________ should be written in figures and words.

ESTIMATED AMOUNT ESTIMATED AMOUNT

Put to tender Rs. 454236327.00 Put to tender Rs45426327.00

Rupees in words: ___________ Rupees in words: _________________

1. (*) Please strike out whichever is not applicable. All work shall be carried out as per the specifications of the GIDC or as directed.

2. All the columns in Schedule should be filled in ink and the total entries in the last column should be struck by the contractor under his

3. Rate quoted included clearance of site (prior to commencement of work & at, its close) in all respect & hold good for the work under all

conditions, site moisture, weather etc.

4. I/We have read the tender/general specifications/ conditions and I/We agree to follow same and binding to me/us.

Signature of Bidder EXECUTIVE ENGINEER