SPECIAL REPAIRING WORKS OF 2 Nos. SRP BARRACK(G+2) AND Cat. D-01 AND D-02 AT SABARMATI CENTRAL JAIL CAMPUS , AHMEDABAD(INCLUDING ELECTRIFICATION WORK) (First attempt)

NAME OF WORK : SPECIAL REPAIRING WORKS OF 2 Nos. SRP BARRACK(G+2) AND Cat. D-01 AND D-02 AT SABARMATI CENTRAL JAIL

CAMPUS , AHMEDABAD (INCLUDING ELECTRIFICATION WORK)

STATEMENT SHOWING AT APROXIMATE A QUANTITY FOR THE ITEM OF ABOVE WORK TO BE CARRIED OUT AND APPROXIMATE COST PUT TO THE TENDER FOR

DESCRIPTION QUANTITY Unit RATE IN WORD Amount

Removing and scraping of old deteriorated plaster of any thickness fromm wall / R.C.C member Rs. Ninteen & Paise

1 including stacking of serviceable material and disposal of unserviceable from site of work with all lead 6800.00 SMT 19.38 Thirty Eight Only 1 31

Rs. Twelve & Paise

Removing dry or oil bound distemper by a washing and scrapping and sand papering the ceiling

2 1901.00 SMT 12.77 Seventy Seven Only 24

surface smooth including necessary repairs to surface scratches complete.

Rs. Eleven & Paise

Removing dry or oil bound distemper by a washing and scraping and sand papering the wall surface

3 4193.00 SMT 11.19 Ninteen Only 46

smooth including necessary repairs to scratches complete.

Rs. Forty Eight & Paise

Scraping oil paint from steel and other metal surface and making the surface even (with Hand

4 1773.00 SMT 48.83 Eighty Three Only 86

Rs. Forty Seven & Paise

Dismentaling tiledof stone floors laid inmortar including stacking of serviceable materilas and disposal

5 3538.00 SMT 47.25 Twenty Five Only 1 67

of unserviceable materials with all lead and lift.

Dismantlingsanttaryfittings likewashbasin.W.C.pan IndianandEuropean type, flushing Rs. Four Hundred One

6 tanketc.including stacking the materials with all leadand 106.00 NO 401.63 & Paise Sixty Three 42

Rs. Six Hundred Three

Demolition and disposal of unserviceable materials

7 99.00 CMT 603.23 & Paise Twenty Three 59

with all lead and lift.(i) Concrete

Rs. One Thousand Forty

Demolition including stacking of serviceable materilas and disposal of unserviceable materials with all

8 1.00 CMT 1047.38 Seven & Paise Thirty 1

lead and lift. (i) R.C.C. work

Rs. Five Hundred Forty

Demolition of Brick work and stone masonry including stacking of serviceable materilas and disposal

9 2.00 CMT 544.95 Four & Paise Ninety 1

of unserviceable materials with all lead and lift.(ii) In Cement Mortar.

DESCRIPTION QUANTITY Unit RATE IN WORD Amount

Rs. One Hundred Eighty

Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats architraves, Five & Paise Eighty Five

10 holdfasts and other attachment etc. completeand stacking them within all lead and lift.(i) Not 23.00 NO 185.85 Only 4

exceeding 3 Sq.M. in area.

Rs. Two Hundred Eighty

Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness including Six & Paise Twenty Only

watering, ramming and consolidating etc. complete.

Rs. Two Thousand Six

Providing and laying cement concrete 1:4:8 (1- Cement : 4- coarse sand : 8- hand broken stone Hundred Fifty Three &

12 aggregates 40 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation 102.00 CMT 2653.67 Paise Sixty Seven Only 2 70

Rs. Two Hundred Three

Provinding 15 mm thick cement PLASTER in single coat on BRICK or CONCRETE wall for interior & Paise Thirty Four Only

13 plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including finishing with 1587.00 SMT 203.34 3 22

floating coat of neat cement slurry at Ground Floor.

Rs. Two Hundred Thirty

Provinding 15 mm thick cement PLASTER in single coat on BRICK or CONCRETE wall for interior One & Paise Twenty

14 plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including finishing with 578.00 SMT 231.20 Only 1 33

floating coat of neat cement slurry at FIRST FLOOR.

Rs. Two Hundred Fifty

Provinding 15 mm thick cement PLASTER in single coat on BRICK or CONCRETE wall for interior Nine & Paise Six Only

15 plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 coarse sand ) including finishing 768.00 SMT 259.06 1 98

with floating coat of neat cement slurry at SECOND FLOOR.

Rs. Two Hundred Eighty

Provinding 15 mm thick cement PLASTER in single coat on BRICK or CONCRETE wall for interior Six & Paise Ninety Two

16 plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 coarse sand ) including finishing 94.00 SMT 286.92 Only 26

with floating coat of neat cement slurry at THIRD FLOOR.

Rs. One Hundred Ninety

Provinding 10 mm thick cement PLASTER in single coat on CEILING for interior plastering and Nine & Paise Eighty

17 finished even and smooth in C.M. 1:3 ( 1 cement : 3 sand ) including finishing with floating coat of 1105.00 SMT 199.88 Eight Only 2 20

neat cement at Ground Floor.

DESCRIPTION QUANTITY Unit RATE IN WORD Amount

Rs. Two Hundred

Provinding 10 mm thick cement PLASTER in single coat on CEILING for interior plastering and Twenty Five & Paise

18 finished even and smooth in C.M. 1:3 ( 1 cement : 3 sand ) including finishing with floating coat of 186.00 SMT 225.69 Sixty Nine Only 41

neat cement at First Floor.

Rs. Two Hundred Fifty

Provinding 10 mm thick cement PLASTER in single coat on CEILING for interior plastering and One & Paise Fifty Only

19 finished even and smooth in C.M. 1:3 ( 1 cement : 3 sand ) including finishing with floating coat of 186.00 SMT 251.50 46

neat cement at Second Floor.

Rs. Two Hundred

Provinding 10 mm thick cement PLASTER in single coat on CEILING for interior plastering and

Seventy Seven & Paise

20 finished even and smooth in C.M. 1:3 ( 1 cement : 3 sand ) including finishing with floating coat of 38.00 SMT 277.31 10

Thirty One Only

neat cement at third Floor.

Rs. Two Hundred Ninety

Provinding 20 mm thick SAND FACED cement PLASTER on walls above ground level consisting 12 Seven & Paise Sixty

21 mm thick backing coat of C.M. 1: 3 ( 1 cement : 3 sand ) and 8mm thock finishing coat of C.M. 1:1 ( 1 2035.00 SMT 297.68 Eight Only 6 05

cement : 1 sand ) etc. Complete for any height.)

Finishing Ceilling/Slop Surface with Plastic Emulsion Paint on Ceilling/Slop Surface (two coats) to Rs. One Hundred Eighty

give an required shap even shade after throughly brushing the surface to remove all dirt and remains Six & Paise Seventy

of loose poweder material etc. complete. Rate are inclusive of applying two coat of lapy (Putty) and Three Only

22 one coat of primer on new Ceilling/Slop Surface to give and even shade including thoroughly 3470.00 SMT 186.73 6 47

brushing the surface free from mortar dropping and other foreign matter and sand papered

smooth.putty,primer & paint shall be as per approved list of GSPHC

Finishing Wall with Plastic Emulsion Paint on Wall Surface (two coats) to give an required shap even Rs. One Hundred

shade after throughly brushing the surface to remove all dirt and remains of loose poweder material Seventy Six & Paise

etc. complete. Rate are inclusive of applying two coat of lapy (Putty) and one coat of primer on new Thirty Three Only

23 wall surface to give and even shade including thoroughly brushing the surface free from mortar 5114.00 SMT 176.33 9 01

dropping and other foreign matter and sand papered smooth. putty , primer and paint make as per

the approved list of GSPHCL

24 Painting TWO coats (excluding priming coat) on previously printed steel and other metal surface with 1330.00 SMT 87.26 Rs. Eighty Seven & 1 16

synthetic enamel paint, brushing to give an even shade including cleaning the surface of all dirt, dust Paise Twenty Six Only

and other foreign matter.

25 Painting TWO coats (excluding priming coat) on previously painted wood and wood based surface 476.00 SMT 106.96 Rs. One Hundred Six & 50

with enamel paint, to give an even shade including cleaning the of all dirt, dust and other foreign Paise Ninety Six Only

DESCRIPTION QUANTITY Unit RATE IN WORD Amount

Rs. One Thousand

Provinding and fixing water Closet Squatting (ORRISSA TYPE W.C. PAN ) size 580mm first quality

Three Hundred Twenty

26 including necessary "P" or "S" trap, including jointing the trap with pan & soil pipe in viterous chine 38.00 NO 1321.52 50

One & Paise Fifty Two

white colour, Joints shall be pipe sealent.

Providing & Fixing Wall Hung with PVC Flush Tank, Soft Seat Cover & intergal "P" or "S" Trap Rs. Five Thousand Four

including Jointing the Trap with Pan and Soil pipe. Wall hung shall be fixed on S.S heavy duty rack Hundred Seventy &

bolt having 16mm dia, 165mm length using Plastic sleeve Make by Using Drill Bitt Only. Rate are Paise Ninety Only

27 inclusive of all matreials, Labour & Necessary Fittings etc. Complete as per Detailed Drawings, 2.00 NO 5470.90 10

Specifications and as per the Instruction of Engineer In charge. The Model & Make of Wall Hung &

Flush Tank Shall be as per the Approved Make List of GSPHCL.

Providing & Fixing Shower with Arm. Rate are inclusive of all matreials, Labour & Necessary Fittings Rs. Nine Hundred Thirty

etc. Complete as per Detailed Drawings, Specifications and as per the Instruction of Engineer In One & Paise Seventy

28 charge. The Model & Make of Shower with Arm Shall be as per the Approved Make List of 4.00 NO 931.79 Nine Only 3

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) over and above Rs. One Hundred Forty

applying One Coat Of Primer to give an required shape even shade after thoroughly brushing the Seven & Paise Sixty

surface to remove all dirt, and remains of loose powdered materials.etc complete. primer and paint Eight Only

make as per the approved list of GSPHCL

Rs. Seven Hundred

Providing and filling light weight filling material (CINDER) an approved in sunk slabs or as may be Ninety One & Paise

30 20.00 CMT 791.68 Sixty Eight Only 15

directed at all floors including watering, consolidation etc.. Complete.

Rs. Two Hundred Thirty

Provinding 10mm thick WATER PROOF cement plaster in single coat on fair side brick work or

Eight & Paise Eighty

concrete wall for interior plasering upto floor to level and finishing even smooth in cemente mortar 1:3

31 193.33 SMT 238.85 Five Only 46

(1 cement :3 sand) finished with floting coat of neat cemente slurry incl. provinding and mixing water

proofing materials in proportion recommended by the manufacturersfor All Floors.

Rs. One Hundred Ten &

Providing and Laying Acrylic base (Zycosil or equivalent) Water Proofing paint treatment treatment

Paise Seventy Only

32 in two coats of vertical and horizontal surface of depressed portion of Bath/W.C. as directed by 198.00 SMT 110.70 21

engineer in charge.This treatment shall be carried out over & above water proofing plaster.

Rs. Twenty Three &

Providing cement vata (10cm. x 10 cm. size) quarter round in cement mortar 1:1 including neat Paise Forty Five Only

cement finishing, watering etc. complete.

Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-coarse sand : 4-graded stone Rs. Three Hundred

34 aggregate 20mm nominal size) laid in one layer and finished with a floating coat of neat cement. (B) 117.00 SMT 348.08 Forty Eight & Paise 40

50mm thick. Eight Only

DESCRIPTION QUANTITY Unit RATE IN WORD Amount

Rs. One Thousand Four

Provinding & laying COLOURED GLAZED TILES 8 mm to 10 mm thick in skirting, risers of steps and Hundred Twenty Six &

DADO on 10mm thick cement plaster 1: 3 ( 1 cement : 3 coarse sand ) finishing with flush pointing in Paise Ninety Five Only

the colour as specified etc.completion white cement for all floors size and shape shall be as per the

instruction of engg.incharge the tile size shall be 600 mm x 300 mm

Rs. Nine Hundred Sixty

Providing and laying Anti skid Ceramic tiles (Non Skiding) 8 mm to 10mm thick in Floorings, treads of & Paise Forty Seven

steps and landing laid on a bed of 20 mm thick cement mortar 1:3 (1 - cement: 3- coarse sand) Only

finished with flush pointing in the colour as specified etc. complete in white cement for All Floors. Size

and shade shall be as per the instruction of Engineer - In - Charge

Providing and Laying Mirror Polished 25 mm thick Double Diamond Polished Kota Stone Flooring Rs. One Thousand

over 20mm thick base of cement mortar 1 : 6 (1-Cement : 6-Coarse Sand) laid over and jointed with Eighty One & Paise

37 grey cement slurry including Rubbing and Polishing etc. Complete. (A) 25mm Thick. In Green Colour. 920.00 SMT 1081.90 Ninety Only 9 95

Rate Are Inclusive of Single Piece & Making 3 Line Groove and Moulding Of Outer edge as Directed

By Engineer In Charge.

Providing and Laying Double Pre Polished (Dimond Polished) Polished Kota Stone Skirting over Rs. One Thousand Two

20mm thick base of cement mortar 1 : 6 (1-Cement : 6-Coarse Sand) laid over and jointed with grey Hundred Seventy Five &

cement slurry including Rubbing and Polishing etc. Complete. (A) 25mm Thick Paise Ten Only

Providing and fixing to wall, ceiling and floor SWR/UPVC soil waste pipe 110 mm dia. Of Rs. Four Hundred

ISI13592/92 . Rate inclusive of all fittings like single or double 'Y' with door, reducer, coupler single T Ninety Five & Paise

39 241.00 RMT 495.91 Ninety One Only 1 19

with door bend, pipe clip on z patti etc. complete and making good the wall, ceiling and Floor.

Including Z-patti G.I Sloated Min 1.6 Mm Thick (Type B)

Providing and fixing to wall, ceiling and floor SWR/UPVC soil waste pipe 75 mm dia. Of ISI13592/92 Rs. Two Hundred Sixty

. Rate inclusive of all fittings like single or double 'Y' with door, reducer, coupler single T with door Four & Paise Ninety

40 383.00 RMT 264.97 Seven Only 1 01

bend, pipe clip on z patti etc. complete and making good the wall, ceiling and Floor. Including Z-patti

G.I Sloated Min 1.6 Mm Thick (Type B)

Rs. Three Hundred

Providing & Fixing to Wall Ceilling and Floor SWR (Type A) Rain Water pipe as Per IS-13592 of Twenty Three & Paise

90mm Dia. Complete with Special Flings, vent cowl, Compressor type Fittings like G.I. Slotted Z patti Fifteen Only

of 16 Gauge (minimum1.60mm thick) and minimum 6mm dia. U Clamp with Washer Nut at every

41 1.50mt. vertical distance including All Labour Charges etc. complete including making good the 219.00 RMT 323.15 70

Ceilings, Floors and on terrace. Rain water pipe shall be 90 mm Dia. SWR horizontal pipe and

vertical pipe and 90mm bend at the end near by Ground level. Rate are Inclusive of all Necessary

Fittings required for ALL FLOORS.

DESCRIPTION QUANTITY Unit RATE IN WORD Amount

Rs. Two Hundred Two &

Providing and Fixing concealed centre point to wall ceiling and floor CPVC ( SDR 13.5) poipe having

Paise Ninety Seven

National sanitation foundation ( NSF) seal for potable water of following dia. Nominal bore tube

42 fittings and clamps including, making good the wall,ceiling and floor etc complete. Pipe shall be 90.00 RMT 202.97 18

concealed or open as per mentioned in tender description. Pipe shall be approved make of GSPHCL

list (20 mm inside dia)

Rs. Two Hundred Forty

Providing and Fixing concealed centre point to wall ceiling and floor CPVC ( SDR 13.5) poipe having

Seven & Paise Twenty

National sanitation foundation ( NSF) seal for potable water of following dia. Nominal bore tube

43 fittings and clamps including, making good the wall,ceiling and floor etc complete. Pipe shall be 246.00 RMT 247.25 60

concealed or open as per mentioned in tender description. Pipe shall be approved make of GSPHCL

list (25 mm inside dia).

Rs. Three Hundred

Providing and fixing concealed or open center point to wall ceiling & floor CPVC (SDR 13.5) PIPE

Thirty & Paise Thirty Six

having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore

44 tube fittingswith Z patti (Minimum 1.6mm thick) with 6mm Dia U Clamp with washer for Vertical water 30.00 RMT 330.36 9

supply pipe. Pipe shall be concealed or open as mention in tender description. Pipe shall be as per

approved make of GSPHCL make list (32 mm inside dia)

Providing and fixing concealed or open center point to wall ceiling & floor CPVC (SDR 13.5) PIPE Rs. Four Hundred Thirty

having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore Seven & Paise Sixty Six

45 tube fittingswith Z patti (Minimum 1.6mm thick) with 6mm Dia U Clamp with washer for Vertical water 411.00 RMT 437.66 Only 1 79

supply pipe. Pipe shall be concealed or open as mention in tender description. Pipe shall be as per

approved make of GSPHCL make list (40 mm inside dia).

Rs. Two Hundred

Providing and Fixing M.S.Flat Clamp for fixing W.C.'P' of 'S' trap etc.complete as per direction of

46 72.00 NO 219.94 Ninteen & Paise Ninety 15

engineer in charge.

Provinding and fixing gun metal check or non return full way WHEEL / HANDLE VALVE 25 mm dia. Rs. Four Hundred

Rate are inclusive of all materials, Labour & Necessary Fittings etc. Complete as per Detailed Sixteen & Paise Forty

Drawings, Specifications and as per the Instruction of Engineer In charge. All material used as per Seven Only

approved make list by GSPHCL. 25 mm dia.

Provinding and fixing gun metal check or non return full way WHEEL / HANDLE VALVE 40 mm dia. Rs. Six Hundred Fifty

Rate are inclusive of all materials, Labour & Necessary Fittings etc. Complete as per Detailed Six & Paise Eighty Six

Drawings, Specifications and as per the Instruction of Engineer In charge. All material used as per Only

approved make list by GSPHCL. 40 mm dia.

DESCRIPTION QUANTITY Unit RATE IN WORD Amount

Rs. Three Hundred &

Providing and fixing PVC plain colour false ceiing with grid type with alu frame consisting of 600 mmx Paise Twelve Only

600mm 3mm thick plain PVC sheet used as panel insert in a frame work made using anodized

alluminium T section of size 1” x 1” (25 x 25mm, 19 gauge or 1mm thick) in square pattern of grid

49 sizes of 2 x 2 (600 x 600mm). The alluminium frame work is supported from the ceiling with the help 60.00 SMT 300.12 18

of G.I.hook and G.I. wire/6mm M.S. rods of required sizes to maintain proper level etc. The aluminium

frame work is supported on side wall with the use of alluminium L section of size 1 x 1 (25 x 25mm)

angles et. Complete as per direction of Engineer incharge. Manufactures, specification and drawing

Providing & fixing PVC SWR MULTY NANHI TRAP IS:14735 for drain -100mm dia. With jali of Rs. One Thousand One

following nominal dia. of self cleansing design with C.I. Screwed down or Hinged grating including the Hundred Twenty Two &

cost of cutting and making good the walls. Providing & Fixing Floor drain jali (Glossy Finish) (on N.T.) Paise Twenty Six Only

of 6" X 6"size made of Stainless Steel Grade 304 Floor Drain 3 Piece (Cover/Jali/Grating) With Anti

Cockroach Bowl on N.T. Rate are inclusive of all necessary fittings, material, labour etc.complete as

per direction of Engineer In charge.

Providing & Fixing 15mm One way Bib Tap with WAll Flange. Rate are inclusive of All matreials, Rs. Nine Hundred

Labour & Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and as per the Ninety & Paise Sixty

Instruction of Engineer In charge. The Model & Make of Bib Tap ShAll be as per the Approved Make

List of GSPHCL.

Providing & Fixing Two way Bib Tap with Wall Flange. Rate are inclusive of all matreials, Labour & Rs. One Thousand

Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and as per the Instruction Three Hundred Nine &

52 of Engineer In charge. The Model & Make of Two way Bib Tap Shall be as per the Approved Make 5.00 No 1309.39 Paise Thirty Nine Only 6

List of GSPHCL.

Providing & Fixing Health Faucets (ABS Body). Rate are inclusive of all matreials, Labour & Rs. Five Hundred Sixty

Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and as per the Instruction Five & Paise Fifty One

of Engineer In charge. The Model & Make of Health Faucets Shall be as per the Approved Make List Only

Providing & Fixing 15mm Concealed Heavy Duty Stop Cock with Exposed Part & Other Accessories Rs. Nine Hundred Forty

(Sleeve, Lever, Wall Flange). Rate are inclusive of all matreials, Labour & Necessary Fittings etc. Two & Paise Fifty Four

Complete as per Detailed Drawings, Specifications and as per the Instruction of Engineer In charge. Only

The Model & Make of Concealed Heavy Stop Cock Shall be as per the Approved Make List of

Providing & Fixing Stop/Angle cock 25mm Rate are inclusive of all materials, Labour & Necessary Rs. One Thousand Two

Fittings etc. Complete as per Detailed Drawings, Specifications and as per the Instruction of Engineer Hundred Thirty Three &

Incharge. The Model & Make of Shower with Arm Shall be as per the Approved Make List of Paise Fifty Seven Only

DESCRIPTION QUANTITY Unit RATE IN WORD Amount

Rs. Eight Hundred Fifty

Providing & Laying integrated cement based proprietary water proofing treatment of required

Five & Paise Eleven

thickness over the roof including 10mm thick cement mortar 1:3 and CHINA MOSAIC fitting and

finally finishing the surface with white cement slurry and sloping out terrace slabs withFollowing

specification laid to required slope not flatter than 1:80 ( the thickness of water proofing treatment

near rainwater outlet or the lowest point of the finished slope shell not to be less than 45 mm.

Including treating the vertical surface of the parapet wall up to 20 cm. height above finished level of

terracing including finishing top with joint less water proofing plaster curing testing etc, completed.

Rate is Including 10 years performance of guarantee bond to be given on stamp paper ( no extra

shall be paid for increase in thickness for proper slope ). (A) Applying & grounting a slurry coat of

neat cement using 2.75 kg/smt. of cement admixed with proprietary water proofing compound

confirming to IS 2645 and 10mm. Thick water proofing cement plaster in cement mortar in 1:3.over

the RCC slab including cleaning the surface before treatments. (B) Laying cement concrete using

broken brick bat using 25 mm to 40 mm size with 50% of cement mortar 1:4 ( 1 cement : 4 corse

sand )over 10mm. thick water proofing cement plaster in cement mortar in 1:3 admixed with

proprietary water proofing compound conforming to IS 2645 required slope and treating similarly the

adjoining walls up to 200 mm height including rounding of junction of walls.(C) After two days of

proper curing applying a second coat of cement slurry .(D) Finishing the surface with china mosaic

peices laid on 10 mm thick joint less cement mortar of mix 1:3 ( 1 cement : 3 sand) admixed with

proprietary water proofing compound confirming to IS 2645 and finally finishing the surface with

trowel with neat cement slurry .(E) The whole terrace so finished shall be flooded with water for a

minimum period of two weeks for curing for final test. All above operation to be done in order and as

directed and specified by the engineer in charge

Providing & Fixing Single Hole Wash Basin with C.I or M.S. brackete & M. I. fisher union, P.V.C water Rs. Three Thousand

pipe with Connection from Stop Cock to Pillar Tap, PVC Bottle Trap with Connection 32mm dia. C.P. Nine Hundred Thirty

brassa waste coupling etc. Complete. Rate are inclusive of all matreials, Labour & Necessary Fittings Five & Paise Thirty

57 33.00 NO 3935.33 Three Only 1 29

etc. Complete as per Detailed Drawings, Specifications and as per the Instruction of Engineer In

charge. The Model & Make of Wash Basin Shall be as per the Approved Make List of GSPHCL.

including pillar cock, angel cock, bottale trap

Providing and Laying 24" x 24" Double Charge vitrified 8 to 10 mm thick tile flooring over 20 mm Rs. One Thousand Four

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface orfixing on existing Hundred Forty & Paise

58 flooring by adhesive including dismentaling of existing flooring and material jointed with color cement 133.00 SMT 1440.20 Twenty Only 1 91

slurry including finised with flush pointing & cleaning the surface etc. complete for light shade

DESCRIPTION QUANTITY Unit RATE IN WORD Amount

Providing and Laying 24" x 24" Double Charge vitrified 8 to 10 mm thick tile for skirting,risers of Rs. One Thousand

steps and dedo over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new Three Hundred Ninety

59 surface orfixing on existing flooring by adhesive including dismentaling of existing flooring and 12.00 SMT 1392.20 Two & Paise Twenty 16

material jointed with color cement slurry including finised with flush pointing & cleaning the surface Only

etc. complete for light shade

Rs. One Thousand

Providing & Fixing Towel Rod. Rate are inclusive of all materials, Labour & Necessary Fittings etc.

Seventy Eight & Paise

60 Complete as per Detailed Drawings, Specifications and as per the Instruction of Engineer In charge. 40.00 NO 1078.70 43

The Model & Make of Towel Rod Shall be as per the Approved Make List of GSPHCL

Rs. Nine Hundred Nine

Providing & Fixing Towel Ring. Rate are inclusive of all materials, Labour & Necessary Fittings etc.

& Paise Eight Only

61 Complete as per Detailed Drawings, Specifications and as per the Instruction of Engineer In charge. 28.00 NO 909.08 25

The Model & Make of Towel Ring Shall be as per the Approved Make List of GSPHC

Rs. Eight Hundred

Provinding and fixing 600mm x 450mm bevelled edge MIRROR or superior glass mounted on 6mm Twenty Five & Paise

thick A.C. sheet of plywood sheet fixed to wooden plugs with C.P. brass screws & washers. Forty Eight Only

Rs. Sixteen & Paise

63 Providing and fixing in position UPVC/SWR cowel vent to pipe 75mm dia as directed. 29.00 NO 16.47 Forty Seven Only

Rs. Twenty Eight &

64 Providing and fixing in position UPVC/SWR cowel vent to pipe 110mm dia as directed. 21.00 NO 28.16 Paise Sixteen Only

Rs. One Thousand One

Providing and fixing S.W. Gully trap with C.I. grating brick masonry chamber & water-tight C.I. cover Hundred Seventy Six &

65 with frame of 300mm x 300mm size (inside) with standard weight. [I] Square mouth trap (B) 150mm x 44.00 NO 1176.94 Paise Ninety Four Only 51

100mm size P or R type.

Construction of BRICK MASONRY CHAMBER for under Ground C.I. inspection chamber and bends Rs. Three Thousand

with bricks having crushing strength not less than 35 Kg / Cm2 in Cement Mortar (1:5) with RCC top Seven Hundred Ninety

slab with CC (1:2:4) mix ( 1 cement : 2 corse sand : 4 gradded aggregate 20 mm nominal size) with Three & Paise Eighteen

8mm. dia. TMT steel at 15 cm. c/c both ways & providing and fixing precast r.c.c cover size .60 x .45 Only

x .07 mt. with angle frame fixed with C.C (1:2:4) Foundation concrete 1:5:10, inside plaster 15 mm

thick with C:M (1:3) finished smooth with a floating coat of neat cement slurry on walls & bedconcrete

etc, complete. Inside dimension of chamber 455 mm x 610 mm x 450 mm deep for match proposed

pipe line. Rate are also inclusive of out side plaster 15mm. th. in c:m 1:3 from top of the chamber &

all side up to 15 mm. deep below ground level

Rs. Two Hundred Thirty

Extra above item for addi. depth 0.10 mt. or part three of beyond 450 mm depth for brick masonry

67 240.00 NO 239.99 Nine & Paise Ninety 57

chamber 455 mm x 610 mm.

DESCRIPTION QUANTITY Unit RATE IN WORD Amount

Rs. Two Thousand

Providing & Fixing Urinal with P.V.C water pipe, 32mm dia. C.P. brassa waste coupling with Ninety Eight & Paise

Connection 32mm dia waste Pipe etc. Complete. Rate are inclusive of all materials, Labour & Ninety Eight Only

68 Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and as per the Instruction 42.00 NO 2098.98 88

of Engineer In charge. The Model & Make of Urinal Shall be as per the Approved Make List of

Rs. Two Thousand One

Provinding and Laying 18 mm thick Granite Stone Slab Flooring over 20mm thick average base of

Hundred Thirty One &

69 C.M. 1:6 (1cement : 6 coarse sand) laid and jointed with grey cement slury including Rubbing and 96.00 SMT 2131.98 2 04

Paise Ninety Eight Only

Polishing etc. Complete for All Floors.

Providing and Fixing Granite Telephonic Black Colour 15 to 18mm thick for jambs and sills of doors & Rs. Two Thousand Four

windows using neat cement slurry laid over 20 mm average base of cement mortar 1:1(1 cement:1 Hundred Twenty Eight

Coarse Sand) and jointed with grey cement slurry including racking(Tancha Work) rubbing and Only

polishing,scaffoldings,tools and tackles,scaffolding etc. complete(with base of neat cement) as per

direction of Engineer in charge including rounding the exposed edges as directed.

Rs. Two Thousand One

Providing and fixing both side polished machine cut Granite Shelves / Partitions 18mm thick

Hundred Fifteen & Paise

71 embaded in to wall at support including racking and finishing smooth the surface including cutting 30.00 Smt 2115.40 63

the stone as and where required etc. complete including rounding of exposed edges etc. complete.

Rs. Two Thousand

Provinding and Laying 18 mm thick Granite stone slab in Skirting / Dado over 10mm thick average

Three Hundred Twenty

72 base of C.M. 1:3 (1:cement :3 coarse sand) laid and jointed with grey cement slury including Rubbing 22.00 Smt 2325.18 51

Five & Paise Eighteen

and Polishing etc. Complete for All Floors.

Rs. Eighty Two & Paise

Pro. 3 nos groove in total length of staircase tread of size 10mm × 10mm finished smooth in parallel

73 102.00 Rmt 82.80 Eighty Only 8

line, equally spaced as per direction of engineer-in-charge in all type of flooring, etc. complete.

Rs. One Hundred

74 Moulding of Stair trade(Fully Round) etc complete as per direction of Engineer in Charge. 102.00 Rmt 129.95 Twenty Nine & Paise 13

Ninety Five Only

Providing and fixing solid PVC Flush Door shutter 24mm thick,made from Co-extruded three layer Rs. Four Thousand Five

rigid PVC foam sheet(single Extruded) with density not less than 600kg/cbm outer layer (0.8- Hundred Thirteen Only

1mm)thick should be rigid PVC with density of not less than 1400kg/cbm. Door should be water

75 proof,Termite proof ,fire retardant&having good screw holding capacity.proviidng and fixing 100% 174.00 SMT 4513.00 7 85

Solid Wood Plastic composite(WPC) Door Frame 90mmx45mm made from wood plastic

composite(single Extruded Process)material with density 780kg/cbm .all as per specifications drawing

as directed by the engineer in charge.

DESCRIPTION QUANTITY Unit RATE IN WORD Amount

Providing & fixing Steel cupboards with frame and shutter. Frame shall be made with 18 guage Rs. One Thousand Six

double steel sheet. It shall be about 70 mm in width all around. Generally dimension of one shutter Hundred Thirty & Paise

76 shall be around 0.4*0.9mt. The lock and stainless steel handle shall be from Godrej brand only. The 166.00 SMT 1630.90 Ninety Only 2 70

rates are inclusive of Oven backed colour or Dicco spray paint as approved by Engineer Incharge.

Providing,fabrication and fixing M.S. Grill / GATE of approved pattern fabricated from M.S. Rs. Seventy Four &

flats,square bars,round bars,C channel ,square/round box pipe as per detail drawings.Rate is Paise Ninety Two Only

inclusive of welding with griding and applying of mild steel putty with hardener into groove to have

smooth surface,two coats of oil paint and one coat of yellow zinc chromate primer coat of approved

brand only.oil paint shall be luxol enamel paint of berger paint india limited or asian paint apcolite

premium gloss enamel of asian paint or dulux premium gloss enamel of dulux paint and nerolac

sythetics enamel of nerolac paint for all foor and at any height only.M.S Grill/Gate material should be

Providing and fixing Alluminium Section Window having extruded Aluminum Colour anodized section Rs. One Thousand Nine

frame main outer size 95mm x 24mm x 1.17mm (of Jindal Section no:2459 @ wt.of 0.738 Kg/mt), Hundred Two & Paise

horizontal Three track member size 92mm x 31.75mm x 1.30mm (of Jindal Section no:8688,@ Twenty Five Only

Wt.1.07 Kg/mt), vertical member of size 92mm x 31.75mm x 1.50mm (of Jindal Section no:8933,@

Wt. 1.06 Kg/mt) with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm (of Jindal

78 Section no:8947@ wt.of 0.456 Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm (of Jindal 19.00 SMT 1902.25 36

Section no:8949 @ wt.of 0.456Kg/mt) with 5 mm thick transparent bronze colour tinted float glass

with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame

as per details including One Mosquitoe Jalli Shutter With Both Side Locking Arrangment.

Providing and fixing extruded Aluminum Section Windows having extruded aluminum Colour Rs. Two Thousand Four

anodized section frame main outer size 127mm x 38.10mm x 1.35mm (of Jindal Section no:2443,@ Hundred Thirty Six &

Wt.1.384 Kg/mt),horizontal Four track member size 122.20mm x 31.75mm x 1.10mm (of Jindal Paise One Only

Section no:8787,@ Wt. 1.205 Kg/mt), Vertical member of size 122.20mm x 31.75mm x 1.50mm (of

Jindal Section no:8935,@ Wt. 1.398 Kg/mt) with sliding shutters of horizontal member size 40mm x

79 18mm x 1.29mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt),vertical member of size 40mm x 5.00 SMT 2436.01 12

18mm x 1.29mm (of Jindal Section no:8947 @ wt.of 0.456Kg/mt/Section 8948,@ Wt. 0.457 Kg/mt)

with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame as per details etc complete for window

including Two Nos of Mosquitoe Jali Shutter of Size 1750mm X 850mm with Locking Arrangment.

DESCRIPTION QUANTITY Unit RATE IN WORD Amount

Providing and fixing standard extruded of alluminium section of size 63 * 38.10 * 1.2 mm,@Wt 0.643 Rs. One Thousand One

Kg/RMT )with colour aNOdized alluminium frame for ventilation with 5 mm thick frosted glass as Hundred Sixty Three &

details etc complete FOR VENTILATION Paise Ninety Two Only

Providing and fixing of SAINT GOBAIN Mosquito net made out of fiber glass having in black colour to Rs. Eight Hundred Forty

be fixed on existing alluminium section window with the help of 1/2 ' x 1/2 ' ghana sag batten patti Seven & Paise Forty

with black colour on existing alluminium section and well crow in black colour having size of 18 mm Nine Only

wide and wodden support to be fix at every interval of 36 ' of 2 ' x 1 ' with black colour with partlly and

fully openable as per direction of engineer in charge. Rate are inclusive all material and labour

Providing and Fixing Stainless Steel ( 304 Grade ) 1mm thick Matt / Satin Finish Kitchen sink of over Rs. Four Thousand Two

all Minimum size 533mmx 457mm X 203mm deep having bowl Minimum size 470mm x 395mm x Hundred Sixty Nine Only

82 203mm with cement mortar 1:3 etc.complete.Rate including of 32mm dia.C.P.brass waste coupling 4.00 NO 4269.00 17

and 32mm dia. rigid PVC waste pipe upto N.T. approved GSPHC make list

Painting Numbers or name on Acrylic plate as Directed by Engineer in Charge Rs. One Thousand Five

83 4.00 NO 1500.00 Hundred Only 6

Painting Numbers or name on Acrylic plate as Directed by Engineer in Charge Rs. One Hundred

84 24.00 NO 125.00 Twenty Five Only 3

Constructing of cooking platform ( sandwich type ) 68cm width and 80cm high resting on thick Rs. Three Thousand

sandwiched polish Granite Slab in C.M 1:3 with providing and fixing 25 mm thick rough kota stone at Seven Hundred Fifty

bottom and 20 to 25 mm thick Polish Granite stone ( single piece/ telephonic Black ) top & Vertical Seven & Paise Fifty

and polished granite stone (single piece/ telephonic Black ) 20 to 25mm thick on top & 18mm thick in Seven Only

Vertical with 15mm high machine cut polished granite round moulded Top facia patty including

polishing etc . complete as per drawing and specification without stainless steel sink including

necessary cutting for sink & making hole for gas pipe and fixing P.V.C bend of 25mm dia.

DESCRIPTION QUANTITY Unit RATE IN WORD Amount

Providing and laying cement concrete 1:3:6(1- cement : 3- coarse sand : 6- hand broken stone Rs. Two Thousand Nine

86 aggregates 20 mm. nominal size) and curing complete excluding cost of from work in : (a) Foundation 50.00 CMT 2976.00 Hundred Seventy Six 1 48

and plinth Only

Provinding and Laying 25mm thick Machine Cut Rough Kota Stone Flooring over 20mm thick base of Rs. Seven Hundred Five

C.M. 1 : 6 (1-cement : 6- coarse sand ) including pointing with C.M. 1 : 2 (1-cement : 2- stone dust ) & Paise Thirty Nine Only

etc. Complete. (A) 25mm thick

Providing, supplying and Fixing Corrugated DWC HDPE Pipes of Class SN8 Structured Wall Rs. Two Hundred

polyethelene Piping systems (Pipe with online/offline coupler and elastomeric sealing ring) with non- Twenty Nine Only

smooth External Annular Corrugated and Smooth Internal Surfaces (Double Wall) for non-pressure

underground Sewerage & Drainage application as per EN:13476-3 including all transportation, freight

charges, octroi, inspection charges, loading, unloading, conveyance etc. complete. (100mm ID Dia)

Including Lowering, laying and jointing of class SN 8 structured wall ( External Annular Corrugated &

Smooth Internal surface) Polyethylene Piping and fittings with the help of coupler ( on line / off line )

88 attached with one end of pipes, sliding over the elastomeric sealing rubber ring placed on the 88.00 RMT 229.00 20

specified valley of the corrugation at the spigot end, lowering the same into the trench, laying on the

lower bedding (constructed at bottom of trenches) at prescribed gradient,depth & alignment ,testing

the water tightness of the joints, ensuring the continuity tests of specified pipe segments etc.

complete as per drawing,specifications & detailed engineering, including carriage of pipes & fittings

from site stacks to the place of laying etc. as per direction of Engineer-in-charge

Providing, supplying and fixing Corrugated DWC HDPE Pipes of Class SN8 Structured Wall Rs. Three Hundred

polyethelene Piping systems (Pipe with online/offline coupler and elastomeric sealing ring) with non- Ninety Six Only

smooth External Annular Corrugated and Smooth Internal Surfaces (Double Wall) for non-pressure

underground Sewerage & Drainage application as per EN:13476-3 including all transportation, freight

charges, octroi, inspection charges, loading, unloading, conveyance etc. complete. (150 mm ID Dia)

Including Lowering, laying and jointing of class SN 8 structured wall ( External Annular Corrugated &

Smooth Internal surface) Polyethylene Piping and fittings with the help of coupler ( on line / off line )

89 attached with one end of pipes, sliding over the elastomeric sealing rubber ring placed on the 360.00 RMT 396.00 1 42

specified valley of the corrugation at the spigot end, lowering the same into the trench, laying on the

lower bedding (constructed at bottom of trenches) at prescribed gradient,depth & alignment ,testing

the water tightness of the joints, ensuring the continuity tests of specified pipe segments etc.

complete as per drawing,specifications & detailed engineering, including carriage of pipes & fittings

from site stacks to the place of laying etc. as per direction of Engineer-in-charge

DESCRIPTION QUANTITY Unit RATE IN WORD Amount

Excavation for foundation in loose or soft soil upto 1.5 m. depth including sorting out and stacking of Rs. Two Hundred One &

90 useful materials and disposing of the excavated stuff upto any Lead and lift. (By Manual Labour) 7.00 CMT 201.81 Paise Eighty One Only 1

Brickwork using common burntclay building bricks havingcrushingstrength Nost lessthan Rs. Three Thousand

35Kg/Sq.cm.below plinth level conventional brick sin cement mortar1:6 (1cement;6-fine sand) in Nine Hundred Eighty

foundation and plinth. One & Paise Twenty

Credit Value for kotastone Rs.One Hundred Fifty

93 Credit Value for Existing Demolished window Grill 933.00 KG -30.00 Rs.Thirty only - 27

Applying general insecticide pest control treatment to floors, cupboards etc including labour material Rs. Eighty Eight & Paise

etc. complete. Using Imidacloprid 30.5 SCas as Per 6313part -II (0.075 % concentration by mass) is Forty Only

recommended 10.5 ml chemical diluted with 5 litres of water application 0.5 litre chemical/Sqm if

surface is recommended as per I.S.

Providing & Erecting Point wiring with 1.1 KV grade ISI marked 2 X 1.5 sq. mm copper PVC insulted 30.00 Point 468.00 RS: Four Hundred

FRLSH wire with 1.5 sq. mm (green) copper PVC insulated FRLSH wire for earth continuity in existing Sixty Eight only

pipe with approved make 5/6 Amp. ISI make modular type switch and accessories mounted in 20 G.

G.I. company fabricated metallic box covered with appropriate front plate modules erected on wall /

ceiling with necessary modular lamp holder / modular ceiling rose / HD Connector (make and model

approved to be approved by EIC) as directed for open/concealed SB wiring.Length of point wiring

95a must not increase than 10 mtr. For that necessary switch boards and their locations must be finalised

before execution by agency otherwise payment will not be done for extra long point. (For future

extention, if required, agency has to erect one higher size metal box and modular plate as per

instruction of EIC. Cost of blank plate shall be paid as per tender item) [Wire must be having box

packing in existing pipe erected flushed on wall/ceiling complete Light point. Cat.-III.

Necessary sheet / tape / polythene / sand must be erected or filled in all box to prevent mortar going

into the box. Length of point wiring must not increase than 10 mtr. For that necessary switch boards

and their locations must be finalised before execution by agency otherwise payment will not be done

for extra long point. (For future extention, if required, agency has to erect one higher size metal box

and modular plate as per instruction of EIC. Cost of blank plate shall be paid as per tender item) [This

item include cleaning (inside/outside) of all G.I. switch boards, electric point box, fan box, MCBDB &

box cutting plaster finishing for modular plate without any gap] [conductor resistance should be as per

For Bell point. Cat-III (in existing pipe) 4.00 Point 468.00 RS: Four Hundred

95b Sixty Eight only

DESCRIPTION QUANTITY Unit RATE IN WORD Amount

For Secondary Light Point Cat-III ( in existing pipe) 10.00 Point 106.00 RS: One Hundred

Fan Point erected with 6A Modular type switch and hum free EME step type electronic fan regulator 12.00 Point 651.00 RS: Six Hundred

95d mounted ( in existing pipe cat.III) Fifty One only

For separate Point (with 6 Amp. Switch & 5 pin socket both having ISI Make) Cat-III ( in existing 10.00 Point 485.00 RS: Four Hundred

pipe) Eighty Five only

For Looped on switch board (with 6 Amp. Switch & 3/5 pin socket) (Cat-III) ( in existing pipe) 25.00 Point 321.00 RS: Three Hundred

Twenty One only

Providing & erecting Modular type accessories mounted on 20G. company Fabricated Galvanised 2.00 Each 788.00 RS: Seven

Metal box covered with appropriate front plate modules erected flushed with wall / ceiling with 1 Nos. Hundred Eighty Eight

96 TV Socket,1 Nos. of 16 Amp SP Switch & 3 Nos. of 6 Amp 3/5 pin plug. [For TV Switch board] Cat III only

Providing and fixing Plug Point wiring with 1.1 KV grade ISI marked approved make 2 x 2.5 sq.mm 10.00 Point 662.00 RS: Six Hundred

copper PVC insulated FRLSH wire with 1.5 sq.mm (green) copper PVC insulated FRLSH wire for Sixty Two only

earth continuity in FIA approved ISI mark in existing pipe with PVC fitting fixed with adhesive solution

erected in wall/slab along with continuous G. I. fish wire to draw wires and laid in approved manner

zari for PVC pipe & boxes shall be filled with cement mortar & finishing the surface to match the wall

/ ceiling complete with 16 Amp Modular type Swich and accessories mounted in 20 G. GI company

97 fabricated metallic box covered with appropriate front plate modules erected flushed with wall. For

Amp. Indicator switch & 1 No. 6/16 A universal socket white colour suitable for 3/5 pin top duly both

having ISI mark. (Necessary sheet / tape / polythene / sand must be erected or filled in all box To

Prevent Mortor Going In To The Box) Cat.-III. (Conductor resistance should be as per IS:8130/1984)

DESCRIPTION QUANTITY Unit RATE IN WORD Amount

Providing & Erecting Plug Point wiring with approved ISI marked 1.1 kv grade 2 x 4.0 sq.mm copper 2.00 Point 833.00 RS: Eight Hundred

PVC insulated FRLSH wire with 2.5 sq.mm (green) copper PVC insulated FRLSH wire for earth Thirty Three only

continuity in FIA approved ISI mark in existing pipe with PVC fitting fixed with adhesive solution

erected in wall / slab along with continuous G.I. fish wire to draw wires and laid in approved manner.

zari for PVC pipe & boxes shall be filled with cement mortar & finishing the surface to match the wall

/ ceiling complete with approved make 20 Amp. Modular type indicator switch and accessories

98 mounted in 20 SWG GI company fabricated metallic box covered with appropriate front plate

modules erected flushed with wall / ceiling. (a) 20 Amp Indicator switch & 1 No. 20 A universal socket

white colour suitable for 3 pin top duly both having ISI mark (A.C POINT ONLY) CAT III (Necessary

sheet / tape / polythene / sand must be erected or filled in all box to Prevent Mortor Going In to The

Providing & Erecting following Shockproof tissino type accessories erected on 3 mm thick PC 750.00 Each 31.00 RS: Thirty One

(Polycarbonate) sheet in PVC/ Metal/Wooden Box. erected on wall/ ceiling. For One no Single pole only

6 A Switch / Bell push

For One no 3/5 pin 6 A Socket 210.00 Each 31.00 RS: Thirty One

For One no Single pole 16 A Switch 25.00 Each 47.00 RS: Forty Seven

For One no 6/16 A Universal Socket 25.00 Each 47.00 RS: Forty Seven

For One no Single pole 16 A Switch & One no 6/16 A Universal Socket combined 10.00 Each 94.00 RS: Ninty Four

For One no Single pole 16 A Switch & One no 6A/16A Universal Socket combined with indicator & 10.00 Each 124.00 RS: One Hundred

99f fuse Twenty Four only

For Bakelite ceiling, rose 430.00 Each 18.00 RS: Eighteen

For Bakelite lamp holder 85.00 Each 22.00 RS: Twenty Two

DESCRIPTION QUANTITY Unit RATE IN WORD Amount

For Electronic Hum free EME Socket Type Steps Fan Regulator 170.00 Each 217.00 RS: Two Hundred

99i Seventeen only

Supplying & erecting finishing covered with 3mm thick Laminated sheet with grooving as directed of 8035.00 sq.inch 2.00 RS: Two only

following depth. 3" Depth

Providing following type of Modular Type Accessories mounted with 20 G company fabricated metalic 40.00 Each 150.00 RS: One Hundred

box, single mounting base frame covered with textured / metallic front plate, modules erected with Fifty only

necessary connection. As desired by Engineer in charge. For One No. SP 6 Amp Cat-III

For One No 5 pin plug Cat-III 20.00 Each 150.00 RS: One Hundred

101b Fifty only

For TV Co-axial Socket Outlet.Cat-III 2.00 Each 159.00 RS: One Hundred

101c Fifty Nine only

For Electronic hum Free steps EME Fan regulator Cat-III 8.00 Each 395.00 RS: Three Hundred

101d Ninty Five only

For Blank Plate Single Cat-III 15.00 Each 25.00 RS: Twenty Five

For 16 Amp. SP one way switch Cat-III 5.00 Each 179.00 RS: One Hundred

101f Seventy Nine only

For 6/16Amp. Universal socket Cat-III 5.00 Each 198.00 RS: One Hundred

101g Ninty Eight only

Providing, erecting, fabricating the M.S. structure as per requirement of site as per structure design 100.00 kg 77.00 RS: Seventy

Including proper size approved by EIC of M.S. angles, flats, bars, square pipe, channels, sections Seven only

(Tata,Zindal,Asian,Jsi Make) complete with cutting, welding, grinding and finishing duly painted with

Asian/Nerolac make premium quality oil paint and true care red oxide metal primer,asian paint make

102 with erection on site as per direction of engineer in charge with necessary grouting cementing,

plastering and finishing complete. All hole opening of square pipe end must be closed with M.S plate

welding. Payment will be done on KG as per Actual weight.

DESCRIPTION QUANTITY Unit RATE IN WORD Amount

Supplying & erecting 12 mm thick backelite sheet of approved make and grade on 25 x 25 x 3 mm 2.00 Sq. Mtr. 2289.00 RS: Two Thousand

red oxide painted angle iron frame suitable for fixing ICDP SWITCH and energy meter (contractor Two Hundred Eighty

103 shall make approved drawing of Bakelite sheet To arrange required No. of Energy meter & ICDP Nine only

switch -busbar etc. as per Actual space available in electrical room at site)

Supplying & erecting M.S./ G.I metal Box having 16 Gauge painted with red oxide be concealed in 500.00 Sq. Inch 5.94 RS: Five and

wall with necessary plastering & finishing covered with 3mm thick Laminated sheet with grooving as Paise Ninty Four only

104 directed of following depth. 3" Depth

Providing & Erecting 3mm thick Polycarbonate (PC) sheet with grooving as directed 500.00 Sq. Inch 3.00 RS: Three

Providing & erecting following size of TV Co-axial flexible cable comprising inner conductor of solid 50.00 Mtr. 39.00 RS: Thirty Nine

bare copper insulated with Foam PE & Secondary conductor made of poly - Aluminium film bonded only

106 Al. Braids @ suitable coverage overall sheathed with black PVC insulation. for RG-6 [Polycab/

Finolex / RR Kabel Make]

Providing and erecting Medium Class FIA approved and ISI mark white colour (embossed) RIGID 700.00 Mtr. 24.00 RS: Twenty Four

PVC PIPES of following size complete erected with necessary PVC fittings & Junction boxes fixed only

with adhesive solution. concealed in wall / slab along with continuous fish wire to draw mains, laid in

107a approved manner. Zari for PVC Pipe & Boxes shall be plastering by cement mortar & finishing the

surface to match the wall / ceiling. For 20 mm dia.

For 25mm dia. 700.00 Mtr. 33.00 RS: Thirty Three

Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping) having double-locking 700.00 Mtr. 22.00 RS: Twenty Two

arrangement with grooves, trunking of size not below 12.5 mm in height as per IS with accessories of only

108a PVC/Resin polypropylene not below 1.8 mm thick duly sealed in joint & erected on wall / ceiling of

following size . For 20 mm dia.

For 25 mm dia. 700.00 Mtr. 31.00 RS: Thirty One

Supplying and laying UPVC cable trunking system comprising unplasticised polyvinyl, chloride rigid 150.00 Mtr. 424.00 RS: Four Hundred

material with ignition free & flame proof confirming BS .All necessary accessories and measuring of Twenty Four only

following sizes. For 100 mm x 50 mm trunking (MK, LEGRAND, OBBO make Only])

DESCRIPTION QUANTITY Unit RATE IN WORD Amount

For 50 mm x 50 mm trunking (MK, LEGRAND, OBBO make Only]) 50.00 Mtr. 187.00 RS: One Hundred

109b Eighty Seven only

Providing & fixing 20 mm. dia. PVC insulated G.I. Corrugated Flexible pipe with necessary socket, 50.00 Mtr. 31.00 RS: Thirty One

PVC bushes saddle, Check-nuts etc. complete of following sizes. only

Providing & fixing 25 mm. dia. PVC insulated G.I. Corrugated Flexible pipe with necessary socket, 50.00 Mtr. 37.00 RS: Thirty Seven

PVC bushes saddle, Check-nuts etc. complete of following sizes. only

Providing & Erecting Mains with FRLSH PVC Insulated wire ISI marked 1.1 KV grade with FIA 200.00 Mtr. 60.00 RS: Sixty only

approved ISI mark medium class 20/25/32 mm dia. embossed rigid PVC casing capping with PVC

fitting fixed with adhesive solution to be erected on/in brick wall / slab along with continuous G. I. fish

wire to draw mains laid in approved manner with plastering by cement mortar & finishing the surface

112a to match the wall / ceiling complete with FRLSH PVC insulated wire for earth continuity. (Approved

ISI make only) For 2 x 1.5 sq.mm. FRLSH copper multi stranded conductor mains with 1.5 sq.mm.

FRLSH copper multi stranded conductor for earthing as per standard colour code. -In Existing Pipe

[Wire must be having box packing]

For 2 x 2.5 sq.mm. FRLSH copper multi stranded conductor mains with 1.5 sq.mm. FRLSH copper 200.00 Mtr. 81.00 RS: Eighty One

multi stranded conductor for earthing as per standard colour code. -In Existing Pipe [Wire must be only

112b having box packing]

For 2 x 6.0 sq.mm. FRLSH copper multi stranded conductor mains with 2.5 sq.mm. FRLSH copper 150.00 Mtr. 157.00 RS: One Hundred

multi stranded conductor for earthing as per standard colour code.-In Existing Pipe [Wire must be Fifty Seven only

having box packing]

DESCRIPTION QUANTITY Unit RATE IN WORD Amount

Supplying and Erecting LED indoor fitting having 1100mm long with LED of wattage Mashroom shape 280.00 Each 370.00 RS: Three Hundred

0.2W to 0.5W assemble on single MCPCB with housing use as a heat sink shall be made from white Seventy only

powder coating Aluminum extrusion having enough strength (sample must be approved by EIC)with

polycarbonate diffuser with following specification:

(A) Company mark/name on the fitting.

(B) Rated input voltage and frequency: 220V to 240 VAC ; 50Hz.

(C) Rated input wattage: max. 24w

(D) Rated input current : 0.2 Amp

(E) Power Factor : Min.

(F) ATHD :Max. 15%

(G) Rated Luminous flux: Min. 2420 lm

(I) CRI: Min. 80Ra

113 (J) Driver Efficiency: Min. 80%

(K) LED life span: Min. 50000 Hrs @ L70 (Certificate shall be attached)

(L) Over Voltage protection: Withstand up to 440V/AC for 4 Hrs.

(M) Surge protection : Min. 2KV (N) IP rating: IP

(O) IK rating : IK

(P) Short circuit , Open circuit & Reverse Polarity Protection must be provided

(Q) Fixing Clamp min.12mm wide heavy duty design & strength should be sufficient to hold the fitting

erected on wall or ceiling

(R) 3 core x 1.0 Sqmm copper wire with min. 1ft (300mm) earthing connector.

(Note:-The manufacturer/ authorized Channel partner of the manufacturer has to submit 5 yrs free

replacement Guarantee for complete Fixture) [Approval will be given strictly subject to item

Providing and erecting max. 10 watt LED battern having main housing having powder coated 15.00 Each 309.00 RS: Three Hundred

aluminium extruded & mashroom shape polycarbonate diffuser. Electrically & photomatry parameters Nine only

are as undr: 240 V, 50 Hz, System wattage 10 w ± 10 %, PF ≥ 0.95, system luments min. 1000, CCT-

3000K to 6500K, CRI ≥ 80, THD ≤ 15%, delivery efficiency ≥ 85%, L80 Certified LED, 30000 hrs. @

L70, Electronic CC driver, 3 core insulated copper wire for internal wiring, IP20, operating voltage:

160 to 270 V, Surge - 2 KV, Fixing Clamp min.12mm wide heavy duty design & strength should be

sufficient to hold the fitting erected on wall or ceiling,Length of fitting should be min.600mm,3 core x

0.5 Sqmm copper wire with min. 1ft (300mm) & earthing connector.

DESCRIPTION QUANTITY Unit RATE IN WORD Amount

Supplying and erecting 8 W LED lamps with following wattage capacity of 220 to 240 voltage, 90.00 Each 111.00 RS: One Hundred

minimum 15000 burning hours life, 500 V in built-surge protection,Polycarbonate diffuser, mounting Eleven only

115 suitable for E14 / E27 / B22 lamp holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser

suitable LAMP holder

Providing and erecting Decorative Ding Dong call bell Stereo type 250 Volt complete erected on 4.00 Each 170.00 RS: One Hundred

existing polished wooden block or in M.S. box with 3 mm thick white ISI mark laminated sheet. Seventy only

116 (Anchor (chime), Vision, Rider make)

Supplying and erecting approved make 200mm sweep low noise decorative exhaust fan having 30.00 Each 1353.00 RS: One Thousand

Aerodynamically designed and Blanced Blade, Blade finish Opaque,body colour White , finish Three Hundred Fifty

Glossy , Rated Speed 1350 revolution per minute ,air delivery 500m³ / hr , noise level 50 dB , Three only

117 Power Consumption 35 W, ,Rated Voltage 230 V , no. of blades 7 , guard 18 Louvers , square

frame ABS body with inbuilt lowers and square frame.( Havells Make Ventilair LX or Bajaj, Usha,

Crompton and Equivalent Model Approved by EIC subject to Above Specification )

Providing and erecting Polycarbonate body surface mounting LED Bulk head type 9 watt Lighting 14.00 Each 780.00 RS: Seven

Fitting with electronic driver having THD < 15%, CRI>80, P.F.0.95 And lumen output from luminaire Hundred Eighty only

720 lm, input voltage range 160-270 V AC, 50 Hz cool white (3000 to 6500 k), inbuilt driver having

efficiency >=80lm/w, -20 deg C to + 60 deg C working temperature, AL frame with Beam Angle

Supply, Installation, Testing and Commissioning of 1200mm sweep, BEE 5 Star rated, Max. 30Watt 182.00 Each 2603.00 RS: Two Thousand

Ceiling fan with Brush Less Direct Current (BLDC) permanent ferrite magnet Motor, class of Six Hundred Three

insulation: B/E, Double ball bearings, Rust free 3 nos.Aluminium blades, 2 nos. canopies, shackle kit only

with earthing provision, copper winding, Power factor not < 0.9, Service Value (CMM/W) minimum

7.5, Air delivery minimum 220 CMM, Minimum 345 RPM,230v (tolerance as per IS : 374-2019), THD

< 10%, compitible with electronic regulator unit for Five Speed Control and all remaining accessories

119 including safety pin, nut bolts, washers, temperature rise = 75 degree C (Max.), suitable for 140 to

285 Voltage and rectifier circuit with surge, over current and overload protection , 50 Hz, Single

phase AC Supply, earthing, Down road: up to 1.0 mtr as per site tequirment etc. Complete as

required.[ Make shall be approved by Engineer in Charge] (A) 1200 mm Sweep (48") ( Make - Havells

Efficiencia Dx , Bajaj Energos 28 & Crompton make & model approved by EIC suject to above

specification )

DESCRIPTION QUANTITY Unit RATE IN WORD Amount

Supplying & erecting 19/20 mm. nominal bore "B" class G.I. pipe / M.S. pipe down rod erected duly 182.00 Mtr. 107.00 RS: One Hundred

painted for fan complete with necessary 24/0.2 flat 3 core flexible wire with earthing. The down rod Seven only

thickness, hole, locking arrangement, construction, powder coating, colour shed should be same as

120 original down rod brought with ceiling fan. For that agency has to give original down rod sample to

fabricator and one sample down rod should be approved with EIC. After approval given by EIC

agency can use the down rod as per approved sample. If without approval down rod will be erect on

site, agency has to replace them with own cost.

Providing Fan clamp of 30 x 5 mm flat of required length & 10 mm M.S. Bolt & Nuts erected with 182.00 Each 98.00 RS: Ninty Eight

121 necessary hook of 10 mm M.S. Round Bar. only

Supplying and erecting Fabricating terminal box for street light pole made from 16 SWG M.S. sheet 27.00 Each 702.00 RS: Seven

having following size complete with fixing arrangement for terminal board, with necessary hole for Hundred Two only

wire entry and exit from the box. The box shall be provided with cover and hinges on one side and

bolting at other end The box shall be fixed by clamps fabricated from 25mm x 6mm flat.The box shall

be painted with one coat of red oxide and two coats of paint having following box size 330 mm x

mm x 140 mm (depth). Providing and fixing Terminal board of size 5.0 x 127 x 152.4 mm.bakelite

sheet with 15 Amp. kitkat pattern porcelain fuse unit with suitable brass studs with nuts, washers and

clamps of size 25 mm x 3 mm suitable for pole painted with one coat of red lead paint.

Providing & Erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI marked copper 100.00 Mtr. 58.00 RS: Fifty Eight

123 wires of following size to be erected as directed. 3 core 1.5 sq.mm. PVC insulated round copper wire only

ISI mark. (streetlight)

Providing & erecting bracket consisting of ISI mark "B" class G.I. Pipe 4.2 cm outside diameter 27.00 Each 487.00 RS: Four Hundred

complete with suitable G.I. Sleeve tubing of 2 mm. thick and required size and length suitable for 76.5 Eighty Seven only

/ 80 mm. required size of pole top or pipe in pipe surface for terrace as per instruction of EIC or wall

bracket as per instruction of EIC having nuts and bolts for fixing the brackets and having spread of

Upto 0.50 mtr. length with suitable rise as per site condition and suitable welded stiffner reducer and

124a nipple with check nut complete painted with one coat of yellow zinc and two coats of alluminium paint

for Single arm bracket suitable for pole or terrace as per design given by EIC. For single arm bracket.

(Jindal / Asian / Tata / Surya Prakash make Only) (Fabricators:- Bajaj, Valmont, Transrail, Ambica,

RR Ispat Only) (Test certificate to be submitted)

For Double arm bracket. (Jindal / Asian / Tata / Surya Prakash make Only) (Fabricators:- Bajaj, 7.00 Each 616.00 RS: Six Hundred

Valmont, Transrail, Ambica, RR Ispat Only) (Test certificate to be submitted) Sixteen only

DESCRIPTION QUANTITY Unit RATE IN WORD Amount

SITC of Outdoor aesthetically designed LED Street Light Luminaire with total consumption of max. 55 11.00 Each 4406.00 RS: Four Thousand

Watts with single piece heavy duty & sufficient size of die cast aluminium housing to accommodate Four Hundred Six

driver, both SPD and necessary wiring and terminal easily inside the housing. High power LEDs only

wattage of 5 Watt (Driving current of LED should be max. 80% of Rated current) shall be mounted on

high quality metal core PCB with extremely precison designed heat sink complete with IP66

protection. LED lense are covered with thoughened glass / premium cluster Lens for better light

distribution. The fixture should be suitable for pole/bracket mounting. The fixture should be complied

with both LM79 and LM 80 certified. LED module should be tested L70 at 50,000 hrs ( All Test

Certificate must be submitted with RA bill). LED fitting provided with high quality potted driver with

Metal housing and protection against high and low Voltage cut Off, Protection against 440V. Driver

should have protection like over current, over voltage, short circuit and operational in the temperature

range of 0 deg to 50 deg and humidity range of 10% to 90% RH. THD of driver should be less than

10% and P.F > 0.95. The Fixture should meet the technical criterias like Operating Voltage range

to 270 V, total lumens of fitting not less than 7500, CCT> 4K/6K as per site requirement & decided by

EIC, CRI > 65, beam angle 120 deg, surge immunity level at least 4 KV integral and 10 KV non

integral. (Note:- The manufacturer / authorized Channel partner of the manufacturer has to submit

yrs free replacement Guarantee for complete Fixture)

SITC of Outdoor aesthetically designed LED Street Light Luminaire with total consumption of max. 75 5.00 Each 5229.00 RS: Five Thousand

Watts with single piece heavy duty & sufficient size of die cast aluminium housing to accommodate Two Hundred Twenty

driver, both SPD and necessary wiring and terminal easily inside the housing. High power LEDs Nine only

wattage of 5 Watt (Driving current of LED should be max. 80% of Rated current ) shall be mounted on

high quality metal core PCB with extremely precison designed heat sink complete with IP66

protection. LED lense are covered with thoughened glass / premium cluster Lens for better light

distribution.The fixture should be suitable for pole/bracket mounting. The fixture should be complied

with both LM79 and LM 80 certified.LED module should be tested L70 at 50,000 hrs ( All Test

Certificate must be submitted with RA bill) . LED fitting provided with high quality potted driver with

126 Metal housing and protection against high and low Voltage cut Off, Protection against 440V. Driver

should have protection like over current, over voltage, short circuit and operational in the temperature

range of 0 deg to 50 deg and humidity range of 10% to 90% RH. THD of driver should be less than

10% and P.F > 0.95. The Fixture should meet the technical criterias like Oprating Voltage range

to 270 V, total lumens of fitting not less then 11250, CCT> 4K/6K as per site requirement & decided

by EIC, CRI > 65, beam angle 120 deg, surge immunity level at least 4 KV integral and 10 KV non

integral. (Note:- The manufacturer / authorized Channel partner of the manufacturer has to submit

yrs free replcement Guarantee for complete Fixture)

DESCRIPTION QUANTITY Unit RATE IN WORD Amount

SITC of Outdoor aesthetically designed LED Flood Light Luminaire with total consumption of Max.75 7.00 Each 5324.00 RS: Five Thousand

watts with single piece heavy duty & sufficient size of die cast aluminium housing to accommodate Three Hundred Twenty

driver, both SPD and necessary wiring and terminal easily inside the housing. High power LEDs of 5 Four only

Watt (Driving current of LED should be max. 80% of Rated current ) shall be mounted on high quality

metal core based PCB with extremely precised designed heat sink, complete with IP66 protection.

LED lense are covered with toughened glass / premium cluster Lens for better light distribution. The

fixture should be suitable for pole/bracket mounting. The fixture should be complied both LM79 and

LM 80 certified. LED module should be tested L70 at 50,000 hrs ( All Test Certificate must be

submitted with RA bill). LED fitting provided with high quality potted driver with Metal housing and

127 protection against high and low Voltage cut Off, Protection against 440V. Driver should have

protection like over current, over voltage, short circuit and operational in the temperature range of

deg to 50 deg and humidity range of 10% to 90% RH. THD of driver should be less than 10% and P.F

> 0.95. The Fixture should meet the technical criterias like Operating Voltage range 180 to 270 V,

total lumens of fitting not less then 11250, CCT > 4K/6K as per site requirement & decided by EIC,

CRI > 65, beam angle 120 deg, surge immunity level at least 4 KV integral and 10 KV non integral.

(Note:- The manufacturer / authorized Channel partner of the manufacturer has to submit 5 yrs free

replacement Guarantee for complete Fixture)

SITC of Outdoor aesthetically designed LED Flood Light Luminaire with total consumption of Max.105 5.00 Each 6316.00 RS: Six Thousand

watts with single piece heavy duty & sufficient size of die cast aluminium housing to accommodate Three Hundred Sixteen

driver, both SPD and necessary wiring and terminal easily inside the housing. High power LEDs of 5 only

Watt (Driving current of LED should be max. 80% of Rated current ) shall be mounted on high quality

metal core based PCB with extremely precised designed heat sink, complete with IP66 protection.

LED lense are covered with toughened glass / premium cluster Lens for better light distribution. The

fixture should be suitable for pole/bracket mounting. The fixture should be complied both LM79 and

LM 80 certified. LED module should be tested L70 at 50,000 hrs( All Test Certificate must be

128 submitted with RA bill). LED fitting provided with high quality potted driver with Metal housing and

protection against high and low Voltage cut Off, Protection against 440V. Driver should have

protection like over current, over voltage, short circuit and operational in the temperature range of

deg to 50 deg and humidity range of 10% to 90% RH. THD of driver should be less than 10% and P.F

> 0.95. The Fixture should meet the technical criterias like Operating Voltage range 180 to 270 V,

total lumens of fitting not less then 15750, CCT > 4K/6K as per site requirement & decided by EIC,

CRI > 65, beam angle 120 deg, surge immunity level at least 4 KV integral and 10 KV non integral.

(Note:- The manufacturer / authorized Channel partner of the manufacturer has to submit 5 yrs free

replacement Guarantee for complete Fixture)

DESCRIPTION QUANTITY Unit RATE IN WORD Amount

Providing , erecting , testing and commissioning Insu Intelligent Streetlight Controller specially design 1.00 Each 24984.00 RS: Twenty Four

for energy saving in conventional streetlight system ( Cat. No. SLC-03-1Ph-7.5KVA-20Amp/Cat Thousand Nine Hundred

NoSLC-03-1 ph-15 KVA 20 amp per phase) having technial specification ,1 phase 2 wire, 230 V Eighty Four only

AC/ph +/- 25% R Y B N 2 Wire supply System.50 Hz (+ / - 10 %), 2 W (Stand By) to 4 W (at street

light operation)consuption, Advance 8 bit micro controller, switching on longitude and latitude base,

accaracy of +- 1 minute per month. with inbuilt battery, with battery life of more than 8 years, with

speicial device which hold the parameter for more then 10 years without any power and password

protected. 16 character and two line LCD display with backlight, 4 keys user friendly keyboard

129 system, 7500 VA feeder pillar capacity, 63/100 amps isolator ,3 Outpus with termination 40/63 Amps

2/3 pole contactor , 3X16 Amps with F R cable provision to by pass by way of relay operation through

auto/manual switch, 2 to 55 centigrade and humidity 90 % non condensing Outdoor type installation

on pole with clamps.(Provided with clamps and nut bolt) or wall or floor, three locking system flush

type internal panel lock, external pad lock and internal U clamp locking systems for against theft of

panel. having 17/25 Kg weight ,16/18 guage MS weather proof with industrial exterior powder coated

with 7 tank process RAL

Providing & erecting FRLS XLPE (IS : 7098) (I)-88 ISI marked armoured Aluminium conductor cable 200.00 Mtr. 167.00 RS: One Hundred

for 1100 volt to be laid 90 cms. Under ground or to be laid on wall with 1.00 m.m thick G.I. heavy Sixty Seven only

130 guage cable clamp or in existing DWC pipe underground or road crossing or floor. for 4 core

Providing and erecting FRLS XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor 700.00 Mtr. 451.00 RS: Four Hundred

for 1.1 KV. to be laid on wall with necessary clamps 1.00 mm thick to be laid 90 cms underground Fifty One only

131 with 1.00 mm thick G.I heavy duty grade or in existing trench / pipe at road crossing or floor of

following size of cables. for 4 core 4 Sq. mm

Providing & fixing Double compressed heavy duty flange type brass cable gland with rubber ring for P 40.00 Each 43.00 RS: Forty Three

V C insulated armoured cable complete with outgoing tails, insulating tape etc. For following size only

132a cables. For 2 to 4 core x 4.0 Sq. mm (Sigma, MCI, Comet, HMI Make Only)

For 2 to 4 core 10 Sq. mm (Sigma, MCI, Comet, HMI Make Only) 4.00 Each 48.00 RS: Forty Eight

Solderless crimping type Copper lugs conforming to IS suitable for cable of following size evenly 110.00 Each 8.00 RS: Eight

crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut only

133 bolts in an approved manner.For 1.5/2.5 to 6 Sq.mm Cable

DESCRIPTION QUANTITY Unit RATE IN WORD Amount

Providing & fixing Solderless crimping type Aluminium lugs conforming to IS suitable for cable of 16.00 Each 10.00 RS: Ten only

following size evenly crimped with high pressure tool & connected to switchgear terminals with

134 brass/cadmium plated nut bolts in an approved manner. For 10 Sq.mm. Aluminium Cable

Providing & laying HDPE Double walled corrugated pipes (DWC) (conforming to IS: 16205 (part 24) 250.00 Mtr. 117.00 RS: One Hundred

2018)) with minimum load required of 450N capacity with anti rodent and ultra violet material Seventeen only

properties with necessary connecting accessories of same material at required depth to be laid

cms. under ground for laying of cable below ground / road surface for enclosing cable and back

filling the same to make ground as per original. For Outer dia. 50 mm and Inner dia. 38 mm. ) (Test

Certificate to be Submitted)

Providing & Erecting 2.0 mtr long Earthing system by making minimum bore of 225 mm dia in soft 4.00 Each 6000.00 RS: Six Thousand

soil. Suitable for doing pipe-in-pipe technology earthing.Earth electric rod must be made from only

Corrosion free Hot dip galvanizing pipes having following specification.

(A) Earthing Electrode: outerpipe:- 88 mm minimum O.D., ISI 'B ' Class ISI mark of Reputed Brand,

Inner pipe:- 42 mm minimum O.D., Pipe B Class ISI mark reputed Brand Terminal Size: 70mm X

100mm length, Terminal Should be made from inner pipe for that pipe must be pressed and give

rectangular shape so its work as a terminal.The hot deep galvanising must be done after above

process.Galvanised thickness must be minimum 75 micron any where. SS Nut bolt:- 2 no.with

washer suitable for 14mm dia. hole must be provided at terminal. total minimum Weight(approx.) of

earth electrodewith inside conductive material minimum should be 26 kg.

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%

136a (C) Back fill Compound:- Earthing compound should be capable to retain moisture for long time Back

Filling Compound weight is 25 Kg.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

[Make and model approved by EIC Strictly subject to item specification only] [OEM has to submit all

detail & sample for approved before supplying]

[Water must be poured in bore before starting earthing. Earthing value must be measured with earth

tester. Agency has to bring the earth resistance to at least 02 ohms & voltage between neutral &

Earthing upto 02 volt. Agency has to maintain earthing & its value for one year. Earthing must be

done in the presence of A.E. (GSPHCL)]

Providing & Erecting Earthing Chamber and cover:- Earthing chamber should heavy duty 4.00 Each 1025.00 RS: One Thousand

PVC/CC/brick masonary be size of 400 mm X 400 mm X 400 mm depth and Cover should be heavy Twenty Five only

136b duty cast iron with required size of 300 mm X 300 mm X 4 mm thick. Necessary test report must be

DESCRIPTION QUANTITY Unit RATE IN WORD Amount

For above earthing additional charges for boring in hard rock soil/ semi hard rock soil (by breaker) & 4.00 Each 325.00 RS: Three Hundred

136c filling soft soil in earth pit (certificate for soil have to given by DEE / AE along with photographs) Twenty Five only

Providing & Erecting Mains with ISI marked, 1.1 KV grade electrolyte multi stranded, annealed 110.00 Mtr. 70.00 RS: Seventy

copper conductor with heat resistant PVC insulated conforms to IS:694, IEC - 227 erected in existing only

pipe of following size (Specifically for control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and bolts if required. for One wire 6.00 sq. mm

For One wire 10.00 sq. mm 110.00 Mtr. 114.00 RS: One Hundred

137b Fourteen only

For One wire 16.00 sq. mm 100.00 Mtr. 176.00 RS: One Hundred

137c Seventy Six only

Providing and Erecting in existing fabrication panel approved make Four pole moulded case circuit 4.00 Each 8774.00 RS: Eight Thousand

breaker having breaking capacity ICU of 35 KA. at 415 V. having normal current rating 125A. with Seven Hundred Seventy

variable or Fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal Four only

138 connections,spreader tinned copper & complete erected in existing 16 G.M.S. housing. ICS=100% of

Providing and Erecting in existing fabrication panel approved make Four pole moulded case circuit 1.00 Each 17667.00 RS: Seventeen

breaker having breaking capacity ICU of 35 KA. at 415 V. having normal current rating 200A. with Thousand Six Hundred

139 variable or Fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal Sixty Seven only

connections,spreader tinned copper & complete erected in existing 16 G.M.S. housing. ICS=100% of

Providing & erecting Miniature circuit breaker single pole 6 Amp. to 25 Amp. suitable to operate on 183.00 Each 122.00 RS: One Hundred

140 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to Twenty Two only

IS 8828/1996 with ISI Mark.

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 30.00 Each 360.00 RS: Three Hundred

141 KA breaking capacity & confirms to IS : 8828 in existing metal box having following capacity for Sixty only

Providing and erecting 415 Volt MCB four pole motor & inductive load(c Curve) having 10 KA 7.00 Each 649.00 RS: Six Hundred

142 Breaking capacity and confirms to IS : 8828 in existing metal box having following capacity. For 6 to Forty Nine only

DESCRIPTION QUANTITY Unit RATE IN WORD Amount

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA 2.00 Each 803.00 RS: Eight Hundred

143 breaking capacity & confirms to IS :8828 in existing box having following capacity for 63Amp FP Three only

Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short 16.00 Each 2434.00 RS: Two Thousand

Circuit withstand capacity of 10 KA and suitable for operation on single phase 240 V 50Hz. having Four Hundred Thirty

144 characteristic of quick action & tripping with all advance feature & do not incorporate any electronic Four only

component. for following Max. rating erected as directed. For 40 Amps.DP

Supplying & fixing box for housing RCCB + MCB combination made of 18 SWG sheet steel duly 4.00 Each 486.00 RS: Four Hundred

145 powder coated with gasket, dust & vermin proof bakelite shield two earthing terminals for following Eighty Six only

type of RCCB, RCCB + MCB for 4 Pole

Supplying and erecting approved make panel mounting type Digital Voltmeter having 3 x 1/2 digits 6.00 Each 1263.00 RS: One Thousand

LED display, 0.5 class of accuracy 0 to 750 AC Volts range erected on existing panel board with all Two Hundred Sixty

connection, wiring etc. with manufacturers calibration certificate. Three only

Supplying & erecting aproved make Panel mounting type Digital Ammeter having Three Digits LED 6.00 Each 1543.00 RS: One Thousand

Display,0.5 class of accuracy, External CT operated Calibrated for 0 to 1000 Amps suitable to Five Hundred Forty

147 operate on 500 Volt AC erected on existing panel board with all connection wiring etc.with Three only

manufacturers calibration certificate.

Supplying, erecting, testing and commissioning of Ammeter / Voltmeter selector switch for 3 phase 12.00 Each 314.00 RS: Three Hundred

148 AC supply 500 V on existing panel board with necessary connections. Fourteen only

Supplying and erecting approved make set of indicator lamps LED lamp, lense cover, bakelite 20.00 Each 43.00 RS: Forty Three

149 holder complete erected with necessary connections. only

DESCRIPTION QUANTITY Unit RATE IN WORD Amount

Dismantling the existing light, fan, bell, , independent plug point, wiring with mains of all types along 600.00 point 1.00 RS: One only

150 with accessories etc. complete and handed over to dept.

Dismantling the existing ceiling fan / exhaust fan / cabin fan / bracket fan complete with accessories, 600.00 Each 9.00 RS: Nine only

151 G.I. down rod, frame etc. and making the site clear.

TOTAL CIVIL COST(A)

TOTAL ELECTRICAL COST(B) 18 83

TOTAL COST(A+B) 1 53 09

Asst. Engineer DY.Executive Engineer Executive Engineer

Ahmedabad. Ahmedabad. Ahmedabad.