Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.7 LAccepted-AOC BASSI UNDER BASSI POWER HOUSE DIVISION HPSEBL JOGINDER NAGAR | UNA | HIMACHAL PRADESH | 174301 | ₹4.7 L | L1 | Accepted-AOC Work Award to Sh. Ankit Thakur |
| Sl No | Description | Qty | Unit | Ankit Thakur Contractor L1 |
|---|---|---|---|---|
| 1.00 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand) : 3 graded stone aggregate 20 mm nominal size) as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. | 10.34 | Per Cubic Meter | 6,600 ₹68,244 |
| 2.00 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:3 (1 cement :3 coarse sand) as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. | 6.6 | Per Square Meter | 7,500 ₹49,500 |
| 3.00 | Providing Sal wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. | 0.44 | Per Cubic Meter | 95,000 ₹41,800 |
| 4.00 | Providing and fixing 30 mm thick shutters Kiln seasoned and chemically treated hollock wood panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. | 6.93 | Per Square Meter | 3,200 ₹22,176 |
| 5.00 | Providing and fixing 5mm thick glass panes (wieght not less than 10 kg per square meter) (Saint Gobin/Modi Guard) as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. | 10 | Per Square Meter | 1,400 ₹14,000 |
| 6.00 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws as per direction of Engineer-In-Charge (Century/ Kit ply/Merino) as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. | 12 | Per Square Meter | 3,100 ₹37,200 |
| 7.00 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size Kiln seasoned and chemically treated hollock wood as per direction of Engineer-In-Charge as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. | 6.93 | Per Square Meter | 2,800 ₹19,404 |
| 8.00 | Providing and fixing 2nd class teak wood 50 x 20 mm wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete as per direction of Engineer-In-Charge as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. | 20 | Per Running Meter | 125 ₹2,500 |
| 9.00 | Providing and fixing 12 mm dia chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets of approved make fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. | 15 | Per Running Meter | 500 ₹7,500 |
| 10.00 | Providing and fixing 150x10 mm ISI marked oxidised M.S. tower bolt black finish (Heavy duty of approved make), (Barrel type) with necessary screws etc. complete as per direction of Engineer-In-Charge as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. | 32 | Each | 275 ₹8,800 |
Tender Value
₹5.3 L
EMD Value
₹10,600
Closing Date
17 Dec 2025, 11:00 amClosed
Execuitve Engineer
Kashmir House Dharamshala
Repair and maintenance of Govt. family residential quarter No. 14, 15 type-II and quarter No. 19 type-I at Police lines Bilaspur Distt. Bilaspur (H.P).
2025_HPTDC_122658_1
Proj./2-229/24 Vol-I
Open Tender
Civil Works
30 days
Police line Bilaspur
Please refer Tender documents.
5 documents required · 5 mandatory
₹1,200
₹10,600
7 Mar 2026
4 Dec 2025
17 Dec 2025
4 Dec 2025
17 Dec 2025
4 Dec 2025
4 Dec 2025 - 17 Dec 2025
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand) : 3 graded stone aggregate 20 mm nominal size) as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:3 (1 cement :3 coarse sand) as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
Providing Sal wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
Providing and fixing 30 mm thick shutters Kiln seasoned and chemically treated hollock wood panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
Providing and fixing 5mm thick glass panes (wieght not less than 10 kg per square meter) (Saint Gobin/Modi Guard) as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws as per direction of Engineer-In-Charge (Century/ Kit ply/Merino) as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size Kiln seasoned and chemically treated hollock wood as per direction of Engineer-In-Charge as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
Providing and fixing 2nd class teak wood 50 x 20 mm wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete as per direction of Engineer-In-Charge as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
Providing and fixing 12 mm dia chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets of approved make fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
Providing and fixing 150x10 mm ISI marked oxidised M.S. tower bolt black finish (Heavy duty of approved make), (Barrel type) with necessary screws etc. complete as per direction of Engineer-In-Charge as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
Providing and fixing 125 mm ISI marked oxidised M.S. handles conforming to IS:4992 (Heavy duty of approved make) with necessary screws etc. complete as per direction of Engineer-In-Charge as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
Providing and fixing bright finished brass 100 mm mortice latch (Heavy duty of approved make) with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. complete as per direction of Engineer-In-Charge as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
Providing and fixing bright finished brass hanging type floor door stopper (Heavy duty of approved make) with necessary screws, etc. complete as per direction of Engineer-In-Charge as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter (Finolex, Supreme, Vectus make) as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
Providing and fixing on wall face unplasticised- PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion 110 mm bend (Finolex, Supreme, Vectus make) as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand) as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.13 MB
TenderNoticeSPOffice.pdf
Tender Documents • 0.11 MB
Contractagreement.pdf
Tender Documents • 1.36 MB
technicalbiddingformat.pdf
Tender Documents • 0.06 MB
Sampleofworkdone.pdf
Tender Documents • 0.02 MB
BOQ_179965.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid