Repairing and Renovation of Adarsh Nivashi School (Boys) at Ukai Ta. Songadh Dist. Tapi (New Kitchen And Dinning)

No figures

1 Excavation for foundation upto 1.5 m depth including sorting out and stacking of 749.00 Cumt 120.01

useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or

2 Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out 524.00 Cumt 166.44

and stacking of useful materials and disposing off the excavated stuff upto

Meter lead.(B) Dense or Hard soil

3 Filling in foundation and plinth with sand in layers of 20 cm. Thickness including 132.00 Cumt 471.69

watering ramming and consolidating etc. comp.

4 Filling available excavated Earth (Excluding Rock) in trench plinth side of foundation 697.00 Cumt 133.65

. in layer not excluding 20 cm in depth consolidation each deposited layer by

ramming and watering etc. complete

thickness including ramming watering and consolidating etc. complete

6 Anti Termite System 641.00 Sqmt 134.33

P/L of Permenent piping technology Anti Termite treatment before flooring work by

installing LLDP (Low linear density Polyethylene) tube of 8 mm O.D.& 6.4 mm

I.D.With in Built Pressure Compenstaion chif every 30 cm interval in the tube, having

working pressure of 2 kg/cm 2 and realese rate of 1.9 ltr/Hour fixed by P-Clip and

nails . The LLDP pipe shall be installed at the entire periphery of the building and at

internal network of building depth of 20 to 200 mm under floor every 2 to 3 mtr.c/c

distance (adjustble as per building layout ) & Ends of loop pass through a PVC Elbow

of minmum 32 mm ID at junction box of wall and floor level, entring into a steel

reinforcmed grooved flexible pipe mini.22 mm LD leading into junction box and

during injecting chemicls for termite control tretment. The anti-termite chemical

Lmidcloprid 30.5% SC Mix as per IS 6313(part-III) shall be injected by the pressure

pump diluted with water @ 10.5 ml/5ltr of water at the rate of 2 kg/sq,cm.@ 5 ltr

/Smt .the contractor shall submit approved line plan for piping system and junction

boxes dully approved By Engineer -in-charge with bond of 5 Years warnty .

7 Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- machine 29.00 Cumt 3080.90

cut stone aggregates 40 mm nominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

8 Providing and laying controlled cement concrete M150 for curing complete including 41.00 Cumt 4223.16

cost of formwork but excluding the cost of reinforcement for reinforced concrete

work in (A) Foundations, footings,Base of columns, Plinth Slab and Mass concrete.

Item Rate In

Description of Item Quantity Unit Amount

No figures

9 Providing and laying controlled cement concrete M250 and curing complete 137.00 Cumt 4620.99

including the cost of formwork and excluding reinforcement for reinforced concrete

work in (A) Foundations, footings and Mass concrete.

10 Providing and laying controlled cement concrete M250 and curing complete 55.00 Cumt 7351.11

including the cost of form work but excluding the cost of reinforcement for reinforced

concrete work in Columns, pillars posts and struts Column Up to Plinth Level

11 Providing and laying controlled cement concrete M200 and curing complete 30.00 Cumt 7304.36

including the cost of form work but excluding the cost of reinforcement for reinforced

concrete work in Columns, pillars posts and struts Ground Floor

12 Providing and laying controlled cement concrete M200 and curing complete 7.00 Cumt 7304.36

including the cost of form work but excluding the cost of reinforcement for reinforced

concrete work in Columns, pillars posts and struts First Floor

13 Providing and laying controlled cement concrete M250 and curing complete 92.00 Cumt 6236.84

including the cost of form work but excluding the cost of reinforcement for reinforced

concrete work in Ground & Plinth BEAMS

14 Providing and laying controlled cement concrete M150 and curing complete 101.00 Cumt 5318.56

including the cost of formwork and excluding reinforcement for reinforced concrete

work in (C) Plinth Slabs

15 Providing and laying controlled cement concrete M200 and curing complete 64.00 Cumt 6199.86

including the cost of formwork and excluding reinforcement for reinforced concrete

work in (C) Ground Floor Beams

16 Providing and laying controlled cement concrete M200 and curing etc. complete 4.00 Cumt 6499.46

including the cost of form work and reinforcement for reinforced concrete work in

(C) Chhajja for Ground Floor

17 Providing and laying controlled cement concrete M200 and curing etc. complete 3.00 Cumt 7498.49

including the cost of form work and reinforcement for reinforced concrete work in

(C) Lintal for Ground Floor

18 Providing and laying controlled cement concrete M200 and curing complete 97.00 Cumt 6704.65

including the cost of formwork and excluding reinforcement for reinforced concrete

work in (C) Ground Floor Slab

19 Providing and laying controlled cement concrete M200 and curing etc. complete 6.00 Cumt 8367.39

including the cost of form work and excluding the cost of reinforcement etc. complete

in (E) Stair case for Ground Floor to First floor

20 Providing and laying controlled cement concrete M200 and curing etc. complete 4.00 Cumt 10414.84

including the cost of form work and excluding the cost of reinforcement etc. complete

in RCC Vertical and Horizontal wall for Ground Floor

21 Providing and laying controlled cement concrete M200 and curing etc. complete 42.00 Cumt 10414.84

including the cost of form work and excluding the cost of reinforcement etc. complete

in RCC Vertical and Horizontal wall for First Floor

Item Rate In

Description of Item Quantity Unit Amount

No figures

22 Providing and laying controlled cement concrete M200 for RCC work and curing 4.70 Cumt 6437.23

complete including the cost of form work but excluding the cost of reinforced

concrete work in Coping on Ground Floor

23 Providing IS Mark TMT FE 500D bar reinforcement for RCC work including bending & 83504.00 Kg 77.56

placing in position complete up to All floor Level

24 Providing and fixing 90 cm Height Stainless Steel Railing made from anticorrocive 10.00 Rmt 3626.51

304 grade S S pipe of 50 mm dia (16 Gauge) as hand rail with S S 304 grade Baluster

of 38 mm dia Box pipe (16 Gauge) as a vertical support fixed in RCC slab at 1.2m c/c

including three horizontal S S pipes of 25 mm dia (16 Gauge) at eqal distance fixed

by 18.75 mm dia (16 Gauge) S S pipe with baluster including accessories as per

detailed drawing as directed etc. complete.

25 Providing, laying and fixing 45 cm Height MS Railing made from anticorrocive up of 117.00 Rmt 811.54

RCC Perapet Wall on fixing Hand Railing 50 mm dia (16 Gauge) MS Round Hollow

pipe horizontal 3 Nos and 35mm dia vertical connection pipe 3 No with all material

laboure charges and accessories as per requirement as directed by Engineer-in-

charge etc. complete.

26 Brick work using common burnt clay building bricks having crushing strength not 58.00 Cumt 4121.55

less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -

fine sand) (B) Conventional below plinth

27 Brick work using common burnt clay building bricks having crushing strength not 95.00 Cumt 4403.40

less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -

fine sand) (B) Conventional Ground FLoor

28 Half Brick masonry in common brunt clay building bricks having crushing strength 57.00 Sqmt 669.34

not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in

foundation and plinth (B) Conventional in super structure. for Ground Floor.

29 Providing and fixing 150 mm wide, approved quality chicken wire mesh at junction of 54.00 Sqmt 295.12

brick work and RCC work or two dissimilar surfaces, at all heights fixed by nails,

rowal plugs or tag by cement mortar 1:3 before applying the plaster, including curing,

scaffolding all complete as directed.

30 Providing 20 mm thick double coat mala cement plaster on interior brick / concrete 1069.00 Sqmt 285.35

work for plastering comprising of base coat of 12 mm thick cement plaster in cement

mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm thick top coat of

cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel including

scaffolding curing, 10x10 mm grooves etc. complete. For Ground Floor

Item Rate In

Description of Item Quantity Unit Amount

No figures

31 Providing 20 mm thick double coat mala cement plaster on interior brick / concrete 143.00 Sqmt 285.35

work for plastering comprising of base coat of 12 mm thick cement plaster in cement

mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm thick top coat of

cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel including

scaffolding curing, 10x10 mm grooves etc. complete. For First Floor

32 Providing 10 mm. Thick cement plaster in single coat for plastering on ceiling and 613.00 Sqmt 155.22

soffits of stairs and finished even and smooth in : (I) Cement mortar 1:4 (1 cement :

4 sand) including Mala troveled finish etc. complete. Ground Floor

33 20 mm thick Sand faced cement plaster with 18x8 mm grooves as suggested by this 459.00 Sqmt 389.46

office consisting of 12 mm thick backing coat of C.M. 1:3 ( 1 cement : 3 coarse sand )

and 8 mm thick finishing coat of C.M. 1:1 ( 1 cement : 1 coarse sand) for all heights as

directed etc. complete. and as per pattern sample aprroved by the architect or

directed engineer in-charge

34 Providing throating or plaster drip and moulding to R.C.C. Chhajja. 47.00 Rmt 43.22

35 Applying two coats of Acrylic lapy (putty) & two coats of primer of approved brand 1825.00 Sqmt 40.59

and manufacture on new wall surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other foreign matter and sand

papered smooth.

36 Wall painting (two coats) with plastic emulsion paint of approved brand and 1212.00 Sqmt 81.38

manufacture on undecorated wall surface to give an even shade including throughly

brushing the surface free from mortar droppings and other foreign matter and sand

papered smooth.

37 Painting (two coats) with plastic emulsion paint of approved brand and manufacture 613.00 Sqmt 86.92

on undecorated ceiling surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign matter and sand papered

38 Wall Painting (Two coats) with weather proof 100% acraylic emulsion paint of 459.00 Sqmt 117.40

approved brand and manufacture and of required shade on exterior wall surface to

give an even shade over and including primery coat with Alkaly resistance primer of

approved brand after thoroughly brushing surface to remove all dust and remains of

loose powdered material etc. copm. for all height

Item Rate In

Description of Item Quantity Unit Amount

No figures

39 Providing and laying water proofing treatment with china mosaic tiles flooring over 633.00 Sqmt 1153.42

avg 50 mm C.C. 1:2:4 bedding for maintaining slope for plain and curve surface &

mm to 20 mm of broken piece not more than 2.5CM of ceramic / glazed tiles ( one for

more colour as directed ) to be laid over cement mortar bedding of C M 1:3 (1 cement

: 3 sand ) contain water proofing materials per bag of cement useas specified by

manufactured and slops to be tempered to bring mortar up to surface with using

white cement and colour pigment including rounding of junctions and extending

them up to 15 cm along the wall and curing with bends any patens or design as per

drawing and cleaning by using oxalic acid etc. complete.

40 Providing Plinth Protection to Building including excavation in ordinary soil and 91.00 Sqmt 1436.22

laying cement concrete 1:3:6 using stone aggregates of 40mm nominal size in

foundation layer 100 mm thick below pre-cast Rubber Dye inter locking concrete

block 60mm thick with grade of concrete M200 pneumatic compressed by

mechanically pressed and as per approved design including 75mm Sand layer for

levelling and filling the joint with sand in proper line and level etc. complete,

Including Providing and fixing pre-cast concrete kerb stone of grey cement based

concrete block 30cm length, 30cm height and 15cm thick of M250 grade concrete as

per approved design and including excavation for fixing in proper line and level,

filling the joint with C:M 1:3 (1cement:3 fine sand) etc. complete.

41 Providing and fixing 3 shutter 3 track window having extruded aluminum Colour 6.00 Sqmt 2420.97

anodized section frame main outer size 95mm x 24.10mm x 1.17mm @ wt.of

Kg/mt , horizontal two track member size 92mm x 31.75mm x 1.50mm,@ Wt.1.07

Kg/mt , vertical member of size 92mm x 31.75mm x 1.50mm @ Wt. 1.07 Kg/mt with

sliding shutters of horizontal member size 40 mmx18mm x1.29mm @ wt.of

Kg/mt, vertical member of size 40mm x 18mm x 1.29 mm @ wt.of 0.547Kg/mt,

Beading clip 19mmx 17.30mmx0.90mm @ wt. of 0.124 Kg/mt with 5 mm thick

transparent bronze colour tinted float glass with powder coated aluminum fittings

and fixtures and transparent silicon sealant glass fixing to frame as per details etc

42 Providing and fixing 2 shutter 2 track window having extruded aluminum Colour 47.00 Sqmt 2946.17

anodized section frame main outer size 95mm x 24.10mm x 1.17mm @ wt.of

Kg/mt , horizontal two track member size 92mm x 31.75mm x 1.50mm,@ Wt.1.07

Kg/mt , vertical member of size 92mm x 31.75mm x 1.50mm @ Wt. 1.07 Kg/mt with

sliding shutters of horizontal member size 40 mmx18mm x1.29mm @ wt.of

Kg/mt, vertical member of size 40mm x 18mm x 1.29 mm @ wt.of 0.547Kg/mt,

Beading clip 19mmx 17.30mmx0.90mm @ wt. of 0.124 Kg/mt with 5 mm thick

transparent bronze colour tinted float glass with powder coated aluminum fittings

and fixtures and transparent silicon sealant glass fixing to frame as per details etc

Item Rate In

Description of Item Quantity Unit Amount

No figures

43 Providing and fixing 4 shutter 2 track window having extruded aluminum Colour 19.00 Sqmt 2949.20

anodized section frame main outer size 95mm x 24.10mm x 1.17mm @ wt.of

Kg/mt , horizontal two track member size 92mm x 31.75mm x 1.50mm,@ Wt.1.07

Kg/mt , vertical member of size 92mm x 31.75mm x 1.50mm @ Wt. 1.07 Kg/mt with

sliding shutters of horizontal member size 40 mmx18mm x1.29mm @ wt.of

Kg/mt, vertical member of size 40mm x 18mm x 1.29 mm @ wt.of 0.547Kg/mt,

Beading clip 19mmx 17.30mmx0.90mm @ wt. of 0.124 Kg/mt with 5 mm thick

transparent bronze colour tinted float glass with powder coated aluminum fittings

and fixtures and transparent silicon sealant glass fixing to frame as per details etc

44 Providing & Fixing in position standard extruded approved colour anodised 1.00 Sqmt 2724.07

Aluminum Ventilation with outer frame 65 x 25 x 1.50 mm Stander Box Frame @ Wt

0.833 kg/Rmt with 5mm thick fixed ground glass and Mosquito net jali fixed to

alluminium strip blade fixed or adjestable ventilation including all required

materials, fixtures, fastenning, labours and equipments as per detailed drawing as

directed. For Ventilators

45 Providing and fixing Double shuttered door having green marble frame (excluding 18.60 Sqmt 3251.19

cost of marble) with all open edges machine cut & machine polished, fixed by zinc

coated hinges with double shutter of factory made & stamped I.S 12823 grade one,

type one 35 mm thick solid core, melamine faced, three layered resin, flushed door

having decorative lamination on both sides & 12 mm thick teak wood beading fixed

around the door , Durable Grip shall be providing with both side 15cm long stainless

steel handle and necessary Locking system, S.S. fixtures & fastenings etc. directed by

engineer in charge. Door from "NOVAPAN" OR Equivalent company holding Licence

for Minimum 5 years.

46 Providing and fixing Single shuttered door having green marble frame with all open 29.00 Sqmt 3477.43

edges machine cut & machine polished, fixed by zinc coated hinges with double

shutter of factory made & stamped I.S 12823 grade one, type one 35 mm thick solid

core, melamine faced, three layered resin, flushed door , having decorative

lamination on both sides & 12 mm thick teak wood beading fixed around the door,

Durable Grip shall be providing with both side 15cm long stainless steel handle and

necessary Locking system, S.S. fixtures & fastenings etc. directed by engineer in

charge. Door from "NOVAPAN" OR Equivalent company holding Licence for Minimum

Item Rate In

Description of Item Quantity Unit Amount

No figures

47 Providing and fixing FRP frame size 100 x 50 mm and 35 mm thick ( Fiber Glass with 4.00 Sqmt 2363.40

PUF Injection ) FRP depress panel Single or Double shutter having extra

reinforcement on sides & edges in Gel coat finish.The core of the both shutter & frame

is to be filed up with injected fire retradat grade polyurethene foam done in situ

along with embeded wooden pieces for stiffening & also taking hinges & fintures.The

whole FRP frame & single or double shutter is to be waterproof, weatherproof,

termite proof & resistance to mild acid/alkali. Rates are to be inclusive of S.S hinges

with necessary screws & alluminum fixtures & fastenings & fartener sleeve.Colour

and Shade approved by Engineer-In-Charge.

48 Providing and laying 60 x 60 cm Machine polished Machine cut Kota Stone slab 566.00 Sqmt 1084.30

flooring over 20 mm (average)thick base of cement mortar 1:6 (1-cement 6-coarse

sand) or L.M 1:1.5 (1 Lime putty : 1.5 coarse sand laid over and jointed with grey

cement slurry mixed with pigment to match the shade of slab including rubbing and

polishing etc.complete (A) 30mm thick

49 Providing and laying 60 x 60 cm Machine polished Blue Kota Stone slab 30 mm thick 24.00 Sqmt 1103.87

in riser of steps,skirting dedo and pillars laid on 10 mm thick cement mortar 1:3 (1-

cement 3-coarse sand) and jointed with grey cement slurry mixed with pigment to

match the shade of slab including rubbing and polishing etc.complete (30 mm thick)

50 Providing and laying Matt finished ceramic tiles 60 x 60 cm size 6 mm thick in 4.50 Sqmt 1099.95

flooring treads of steps and landing laid on a bed of 12 mm thick cement mortar 1:3(1-

cement:3-coarse sand)finishing with flush pointing in white cement

51 Providing and laying antiskid ceramic tiles 30 x 30 cm size 6 mm thick in flooring 4.00 Sqmt 929.39

treads of steps and landing laid on a bed of 12 mm thick cement mortar 1:3(1-

cement:3-coarse sand)finishing with flush pointing in white cement

52 Providing and laying glazed tiles tiles size 30 x 45 cm 6 mm thick in skirting risers of 63.00 Sqmt 1477.25

steps and dedo on 10 mm thick cement plaster 1:3 (1-cement:3coarse sand) and

jointed with colour cement slurry

53 Providing and laying machine cut free edge machine Double polished granite stone 27.00 Sqmt 2023.03

18mm thick finished treads and risers in with 1cm projecting, nozing rounded

moulding in tread laid over 12 mm (av.) thick bases of cement mortar 1:6 (1-cement :

6-coarse sand) jointed with grey or colour cement slurry including rubbing and

polishing incl. making Three No.s of grooves of size 3mm X 3mm along the length of

treads etc. complete

54 Providing and fixing polished 18 mm thick black granite with full round edge and 1.00 Sqmt 2651.25

double side polished of approved quality in between urinal and fixing with cement

slurry & adhesive including moulding of both exposed edges as directed by

engineering in charge etc. complete.

Item Rate In

Description of Item Quantity Unit Amount

No figures

55 Providing and fixing mirror polished 18 mm thick Green Marble stone with full round 75.00 Sqmt 2011.92

edge and polished of approved quality in clading on sill and around the doors/

windows/ ventilation with 12 mm thick cement mortor CM (1:4) and fixing with

cement slurry & adhesive including moulding of exposed edges as directed by

engineering in charge etc. complete.

56 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 87.00 Sqmt 704.07

60mm thick with grade of concrete M300 pnumatic compressed / vibrated

mechanically and as per approved design Confirming to IS 15658 : 2006 including

mm Sand layer for levelling and filling the joint with sand in proper line and level as

per guidlines of IRC : SP 63-2018 etc. Complete

57 Providinfg and fixing Safty grills of required pattern for windows/ Door using 2276.00 Kg 103.02

necessary 16x16 mm M.S. Square bar, M.S flats and other structural steel at required

spacing including cutting, welding and fabriction etc. including one coat of primer of

approved quality and two coats of oil painting as per detail drawing etc complete.

58 Providing erecting and fixing double coated Syntex PVC. (ISI) water tank of required 5000.00 Litre 3.95

capacity each with all necessary fittings and connection etc. complete on terrace.

59 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) 60.00 Rmt 195.67

for cold water including fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre C/C or shall be concelled

as directed including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

60 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) 75.00 Rmt 148.12

for cold water including fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre C/C or shall be concelled

as directed including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

61 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) 20.00 Rmt 91.84

for cold water including fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre C/C or shall be concelled

as directed including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

62 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) 25.00 Rmt 72.65

for cold water including fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre C/C or shall be concelled

as directed including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

Item Rate In

Description of Item Quantity Unit Amount

No figures

63 Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type B) 10.00 Rmt 834.38

conforming to IS 13592-1992 with one end plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system

pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be

fixed on wall using of PVC clamp of the size 160 mm diametre x 210 mm length x

mm heigh at every 2000 mm center to center or shall be concealed in walls as

directed including necessary fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent cement including cost of all

materials.

64 Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) 90.00 Rmt 857.65

conforming to IS 13592-1992 with one end plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system

pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be

fixed on wall using of PVC clamp of the size 110 mm diametre x 149 mm length x

mm heigh at every 2000 mm center to center or shall be concealed in walls as

directed including necessary fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent cement including cost of all

materials.

65 Providing, laying and jointing in true line and level 75 mm dia. UPVC SWRType B pipe 10.00 Rmt 293.91

conforming to IS 13592-1992 with one end plain and other end socketed with

rubbering and fitting conforming to ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp at every 2000 mm c/c or shall be conceled

in walss as directed including necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent cement including cost of

all materials.

66 Providing and fixing in PVC SWR cowel went 75mm dia to pipes.(B) 75mm dia. 1.00 No 16.16

67 Providing and fixing in PVC SWR cowel went 110mm dia to pipes.(B) 110mm dia. 18.00 No 29.29

68 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with 6.00 No 585.37

jali of the following nominal diameter of self cleansing design with C.I scread down or

hinged grating including the cost of cutting and making good the walls.

Item Rate In

Description of Item Quantity Unit Amount

No figures

69 Providing and fixing wash down water closet (European type W C pan) with integral 1.00 No 3035.05

P and S trap including jointing the trap with soil pipe in cement mortar 1:1 (1 cement

five sand) including providing and fixing plastic seat cover for wash down WC with

CP brass hinges and rubber buffers back plastic seat and including providing and

fixing PVC flushing tank with a pair of C I or MS bracket with complete fitting such as

lead valve siphon 15 mm dia brass ball valve with polythene float CP brass handle

unions and couplings for connection with inlet out let and over flow pipes 40 mm dia

porcelain enameled flush bend including cutting holes in walls and making good the

same connection the flush bend with cistern and closet vitreous china.

70 Providing and fixing stainless steel grab 22 cm x 60 cm for handicapped toilet 2.00 No 1492.78

71 Providing and fixing Angle cock with Wall flange crome finished brass (i) 15mm dia. 2.00 No 858.50

72 Providing and fixing ball cock of approved. quality as directed.(A) Copper Metal (ii) 2.00 No 189.84

73 Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. 1.00 No 1649.22

brackets painted white including Rubber plug, sutting holes and making good the

same but excluding fittings and also including rate of C.P. brass waste for washbasin

or sink (A) 32mm dia. and M.I. fisher union for washbasin or sink. (A) 32mm dia.; (A)

Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour.

74 Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass 1.00 No 852.76

mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with

C.P. brass screws and washers.

75 Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to 1.00 No 616.42

wooden plugs with C.P. brass scews (B) 600mm x 20mm size.

76 Providing and fixing screw down bib taps of following size.(A) Brass screw down bib 11.00 No 214.81

tap polished bright. (i) 20mm dia.

77 Providing and fixing pillar tap, capstan head, screw down high pressure with screws, 1.00 No 308.73

shanks and back nuts. (i) 15mm dia.

78 Providing and fixing chromium plated brass half trun flush cock of approved quality 1.00 No 263.77

including fixing in pipe line etc. complete (ii) 25mm dia.

79 Providing laying (to level or slopes) and jointing reinforced concrete Light duty non- 96.00 Rmt 678.01

pressure pipes I.S. class NP2 of the following internal diameter with collars and butt

ends prepared for collar joints including testing of joints complete. (D)

80 Providing and laying (two level or slopes) and jointing with stiff mixture of Cement 80.00 Rmt 526.46

Mortar in proportion 1:1, Salt glazed stone ware pipes of pipes 150mm laying lime

concrete 1:2:4 (1-Lime putty :2-Fine samd : 4-Graded brick aggregates 40mm

nominal size) bedding for stoneware pipes of following internal diameters with

necessary formwork and curing complete.

Item Rate In

Description of Item Quantity Unit Amount

No figures

81 Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and 2.00 No 1246.92

water tight C.I. cover with frame of 300mm x 300mm size (inside) with standard

weight (i) Square mouth traps (B) 150mm x 100mm size P or R type

82 Constructing brick masonry chamber for underground C.I. Inspection chamber and 9.00 No 3223.92

bends with briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5

precast RCC cover 455mm x 610mm intenal dimensions with frame (R.C.C. top slabe

with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3

finished smooth with a floating coat of neat cement on walls and bed concrete etc.

complete (i) Inside dimensions 455mmx 610mm and 450mm deep for single pipe

83 Constructing brick masonry chamber for underground C.I. Inspection C.I. Inspection 10.00 No 3933.95

chamber and bends with briocks having croshing strength not less than 35Kg. Cm2 in

C.M. 1:5 precast RCC cover 500mmx 700mm intenal dimensions with frame (R.C.C.

top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm

size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3

finished smooth with a floating coat of neat cement on walls and bed concrete etc.

complete (i) Inside dimensions 500mmx 700mm and 450mm deep for single pipe

84 Constructing brick masonry chamber for underground C.I. Inspection chamber and 4.00 Each 242.39

bends with briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5

precast RCC cover 455mm x 610mm intenal dimensions with frame (R.C.C. top slabe

with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3

finished smooth with a floating coat of neat cement on walls and bed concrete etc.

complete (i) Inside dimensions 455mmx 610mm and 450mm deep for single pipe

Extra over items for every additional depth of 0.1M. of part thereof beyond 450mm

depth for Brick masonry chamber.(i) for 455mm x 610mm size.

85 Constructing brick masonry chamber for underground C.I. Inspection C.I. Inspection 4.00 Each 264.86

chamber and bends with briocks having croshing strength not less than 35Kg. Cm2 in

C.M. 1:5 precast RCC cover 500mmx 700mm intenal dimensions with frame (R.C.C.

top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm

size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3

finished smooth with a floating coat of neat cement on walls and bed concrete etc.

complete (i) Inside dimensions 500mmx 700mm and 450mm deep for single pipe

Extra over items for every additional depth of 0.1M. of part thereof beyond 450mm

depth for Brick masonry chamber.(i) for 500mm x 700mm size.

Item Rate In

Description of Item Quantity Unit Amount

No figures

86 Providing and fixing GI Ladder of required pattern with GI flats(30x3mm) or round 300.00 Kg 95.95

or square bars (12mm) at required spacing & with round headed bolts and nuts or

screws or welding including primer coat of approved quality and two coats of oil

paintas as directed by engineer in charge

87 Constructing Kitchen Platform of 18 mm thick Polished Black Granite at top and 25 18.00 Sqmt 4193.52

mm thick Kota stone slab one side polished at bottom with cementing Materials /

adhsives including makeing necessary grooves in walls with Vertical sandwich two

Kotastone 25 mm support every 60 cm centre to centre or as required including all

labour material of approved quality incl. full moulded round front edge granite strip

of one side polished and jointed with grey cement slurry including rubbing and

polishing etc. complete for all floors

88 Providing and fixing 25 mm thick polished kota stone Shalve with full round edge 33.00 Sqmt 667.61

and double side polished of any required and fixing with cement slurry & adhesive

including both exposed edges cut and Smooth Finished as directed by engineering in

charge etc. complete.

89 Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted white including 2.00 No 3640.04

cutting holes in walls and making good the same but excluding fittings. (C) Vitreous

China Sink.(i) 600mm x 450mm x 150mm size

90 Providing and fixing Kitchen platform trolley having three drawers of SS (IS 304) of 18.00 Sqmt 12664.39

required size like thali, katleri, perforated, partition, cupsosar type in kitchen

platform having drawer front side and backside by using 19mm thick all proof

plywood of ISI quality all side laminated etc. as directed. The size of SS (IS 304)

basket of size 4" to 18" for thali, dish, katleri, perforated, partition, cupsosar type as

directed including necessary S.S. fittings, handles, nobs, telescopic channels, etc. as

91 Providing and fixing 0.75 meter wide sand which type counter platform including 4.00 Sqmt 7190.19

supplying and fixing granite stone of Z black or equivalant quality 18 mm thick

mirror polished on top and side posiition and vertical strip at front with cement

slurry & adhesive including moulding of both exposed edges over 25 mm thick kotah

stone platform fixing in top and sides and itermediates supports fixing with cement

mortar and adhesive and finishing all material and labour and assessories and 3 no

flat back wash with necessary fitting MI Fisher , Waste pipe and coupling , 15 mm

pillar cock etc. complete etc.

92 Providing and fixing 0.45 meter wide sand which type platform including supplying 4.00 Sqmt 3274.42

and fixing granite stone of Z black or equivalant quality 18 mm thick mirror polished

on top and side posiition and vertical strip at front with cement slurry & adhesive

including moulding of both exposed edges over 25 mm thick kotah stone platform

fixing in top and sides and itermediates supports fixing with cement mortar and

adhesive and finishing all material and labour complete etc.

Item Rate In

Description of Item Quantity Unit Amount

No figures

93 Providing and fixing in position 300 mm high, 150 mm wide English letters made 50.00 No 707.00

from 1.0 mm thick stainless steel sheet as directed by Engineer in charge with all

necessary tools & plants etc. complete.

94 Providing and fixing in position 150 mm high, English letters made from 1.0 mm 100.00 No 404.00

thick stainless steel sheet as directed by Engineer in charge with all necessary tools &

plants etc. complete.

95 Providing & Fixing 114mm wide G.I. Sheets lovers having weight not less than 490 15.00 Sqmt 4548.03

Gm/m roll formed to create 84mm wide louver snap fixed on special shaped GI

channel. Fix louvers & channels shall finished with powder coating of 55 micron (1)

0.55mm thick sheet.etc. complet as per detail drawing as directed.

96 Providing and fixing of acrylic, non-glare, tactile audio pictorial building layout as per 1.00 No 50500.00

the approved size, design and make, having 3mm thick acrylic non glare base plate of

the approved colour and non-glare acrylic cut out symbols raised 3mm above base

plate and Grade 2/ Grade 1 Braille to be integral with the sign face and be raised

0.5mm above base plate. The map to be installed at the specified location as per

accessibility standards, shall be oriented to the position of the viewer and to be

installed at a height of 800 mm from the finished ground/ floor level and using the

necessary hardware specified by the manufacturer and to be installed up to the

height of 800 mm from the finished ground/ floor level and using the necessary

hardware specified by the manufacturer and to be installed complete as per

design/specifications and guidelines as per the entire satisfaction of the the Engineer-

97 Providing & Fixing tactile layout plan of size 900mm x 600mm as approved design, 1.00 No 38380.00

made of 3.0mm thick acrylic non glare base plate and non glare cut out symbols with

Braille on which individual facility points, like inquiry, reception, restrooms, medical

room / first aid, cafeteria or breakout area, lounge, meeting room, conference room

etc. present the respective floors with pictograph wherever needed all in tactile

raised by minimum of 1.0mm to 2mm in various colours to make it legible for seniors,

partial vision impaired etc. All the facility names should be in Braille, along with

English or Hindi. The entire block of tactile signs should be mounted on wall for easy

reading. The map to be installed at specified locations and installed at a height of

800mm from ground level complete in all respect as per Harmonized guideline &

satisfaction of Engineer in charges.

98 Providing and fixing coloured self adhesive PU-Tactile tile, ground surface indicators 24.00 Sqmt 5540.86

of Polyurethane) of size 300mm x 300mm for guiding/warning to the visually visitors

in the centre/side of the pedestrian/approach pathway as per specification and

guidelines complete in all respect to the entire satisfaction of in charge.

Item Rate In

Description of Item Quantity Unit Amount

No figures

99 Providing and fixing acrylic multilingual Braille (raised dots) DIRECTIONAL 25.00 No 2041.72

SIGNBOARDS of size 225 x 150mm designed as per accessibility standards and

having 3.5mm thick acrylic base plate with Upper Case San Serif words made of white

acrylic non glare cut out letters of height 15mm raised not less than 0.8mm above

base plate and the equivalent word written in Hindi with Devanagari non glare

acrylic letters of height 15mm raised not less than 0.8mm above base plate and

having a non-glare acrylic cut arrow pointing in the required direction. Each

signboard to be fixed as per manufacturers specifications on the wall at the approved

location and at a height of 1200mm from FFL complete as per design / specifications

and guidelines as per the entire satisfaction of the Engineer-in-charge

100 P& F BRAILE INDICATOR OF SIZE 170 MM X 35MM FOR HANDRAILS OF THE 23.00 Rmt 1093.83

APPROVED DESIGN AND MAKE HAVE BRAILE DOTS RAISED 0.5 MM ABOVE BASE

PLATE TO BE INSTALLED AT SPECIFIC LOCATIONS AS PER DIRECTION OF

ENGINEER IN CHARGE

101 Providing and fixing of conspectus tape 50mm width on of treads in staircase 40.00 Rmt 2557.83

including cutting pasting etc. As per harmonised guidelines complete in all respect to

the entire satisfaction of engineer in charge.

102 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure 80.00 Rmt 339.05

poluthene pipes of the following outside Dia. Low densidy, complete with special

falnge compression type fittings, wall clipsetc. including making good the wall ceiling

and floor.(G)110 mm

103 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure 30.00 Rmt 696.90

poluthene pipes of the following outside Dia. Low densidy, complete with special

falnge compression type fittings, wall clipsetc. including making good the wall ceiling

and floor.(G)160 mm

104 Providing junction for rain water juncton chamber of size 0.60x0.60x0.75m with 5.00 No 9101.11

excavation of size 1.96x1.96 m & 0.15m thick c.c.1:2:4 bed concrete including brick

masonary wall in CM 1:6 of 0.75m height & 0.23m thick with 15mm thick cement

plaster inside & outside & 1.06x1.06 RCC (1:2:4) slab of thickness 0.15m with CRS

steel and 0.60mx0.45m cast iron manhole cover with frame weight not less than

kg as per directed by Engineer-in-charge

105 Providing Filter chamber of Brick work in C:M 1:6 of size 2.06mx1.20m x1.20m & 1.00 No 16907.40

excavation dimension of 2.66mx 1.81x1.35m including C.C 1:2:4 bed concrete of

0.15m thick including brick work in c.m 1:6 for 23cm thick wall including 15mm thick

cement plaster inside & outside with cement slurry & 10cm thick RCC 1:2:4 top cover

with frame of minimum weight of 35 kg & filling filter material kapchi in layers (25-

40mm & 10-20mm) & BT metal 40mm & sand as per directed by Engineer-in-charge

Item Rate In

Description of Item Quantity Unit Amount

No figures

106 Providing Recharging pit of size 2.0m Dia.& 2.0m depth of water logging with 1.00 No 15342.91

excavation filling the pit with gravel & sand in layers including making 300mm dia

bore depth of 4.5mt & above concrete with kapchi in layers (25-40mm & 10-20mm) &

BT metal 40mm & filling brick as directed by Engineer-in-charge.

107 Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded 3.00 Cumt 3786.47

stone aggregates 20 mm nominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

108 Providing 15mm thick cement plaster in single coat on Rough (Similar) side of single 202.00 Sqmt. 222.24

or half birck walls / concrete wall for interior plastering and finished even and

smooth in C M 1:4 (1 cement : 4 coarse sand) with floting coat of neat cement slurry

etc. comp. For Ground floor

109 Constructing brick masonry chamber for underground C.I. Inspection chamber and 6.00 No. 7180.44

bends with briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x 610mm intenal dimensions, total weight of

cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame

15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and

bed concrete etc. complete.(iii) Inside dimensions 600mm x 850 mm and 450mm

deep for pipe lines with three or more inlets.

110 Box cutting the road surface to proper slope and camber for making a base for road 50.00 Cum. 106.65

work including removing the excavated stuff and depositing on the road side slope as

directed upto 50Mt.lead.

111 Filling in plinth with sand under floors including watering ramming, consolidating 14.00 Cum. 366.63

and dressing complete for road work

112 Construction of granular sub-base 150 mm thick by providing coarse graded 14.00 Cum. 656.50

machine crushed B.T. material satisfying MOST specification of grading I (B.T. stone

aggregate 53 mm to 26.5 mm 35 %, 26.5 to 4.75 mm - 45 % and 2.36 mm below -

% )including spreading in uniform layer with motor grader on prepared surface,

mixing by mix in place method with rotavator at OMC and compacting with vibratory

roller to achieve the desired density etc. complete.

113 Providing and laying wet mix macadam base course 250 mm thick using machine 18.00 Cum. 711.04

crushed B.T. chips as per required gradation mixing with required optimum quantity

of water, conveying the mix to site of work, spreading in to grade and camber with

mechanical paver and consolidation each layer with vibratory roller including cost of

material labour plant and equipment etc. complete.

114 Providing and laying controlled cement concrete M.150 and curing complete 19.00 Cum. 4007.51

including the cost of formwork and excluding reinforcement for reinforced concrete

work in (A) Foundations and plinth pcc

Item Rate In

Description of Item Quantity Unit Amount

No figures

115 Compaction and finishing of cement concrete road by trimix M.250 process 90.00 Sqm 63.63

providing extra Labour charges for the trimix vacume dewatering service process on

cement concrete road sutface by using vacuum dewatering pump floater surface

vibrator including making groves and rough finish to surface including leveling etc

116 Providing and Laying homoginious Grey cement based concrete kerbing of size 30 cm 58.00 Rmt 370.68

x 30 cm x 10 cm size as per detailed drawing having grade of concrete M25 grade,

including necessary excavation, BBCC 1:5:10 7.5 cm as per ddetailed drawing fixing in

line and level, filling joints in CM 1:3 with smooth finished, white washing three coats

etc. complete as directed by Engineer in charge.

117 Supplying of well rotted FYM manure with all lead and Lift including spreading 8.00 Cum. 378.75

mixing dressing and rolling with hand roller etc. complete.

118 Scarifying the surface of Soil including spreading of DAP fertilizer mixing with Soil 298.00 Sqm 26.26

properly levelling gand dressing of the plot

119 Supplying and planting Dibbing semi carpet lawn at distance of abour 15 cm x 15 cm 298.00 Sqm 20.20

after proper anti termite teratment amd rolling the seme by hand roller amd

wetering etc complete.

120 Bowing and developing flowering plants grown in nusery having approximate height 20.00 No. 30.30

4 to 5 ft or Height ad per Landscaps Plan with natural growith of soil packed in

polithyline bag or Earthern pot. Including organic & chemical fertilizer Pesticides,

fungicides, hormones & maintaining the plants up to three months as deserted. Bottol

121 Bowing and developing flowering plants grown in nusery having approximate height 10.00 No. 60.60

4 to 5 ft or Height ad per Landscaps Plan with natural growith and nature colour

planted in alump of soil packed in polithyline bag or Earthern pot. Including organic

& chemical fertilizer pesticides, fungicides hormones & maintaining the plants uo to

three months as deserted Trinagle Plan.

122 Bowing and developing flowering plants grown in nusery having approximate height 20.00 No. 60.60

4 to 5 ft or Height ad per Landscaps Plan with natural growith and nature colour

planted in alump of soil packed in polithyline bag or Earthern pot. Including organic

& chemical fertilizer pesticides, fungicides hormones & maintaining the plants uo to

three months as Jasud

123 Bowing and developing flowering plants grown in nusery having approximate height 20.00 No. 75.75

4 to 5 ft or Height ad per Landscaps Plan with natural growith and nature colour

planted in alump of soil packed in polithyline bag or Earthern pot. Including organic

& chemical fertilizer pesticides, fungicides hormones & maintaining the plants uo to

three months as Croton

Item Rate In

Description of Item Quantity Unit Amount

No figures

124 Bowing and developing flowering plants grown in nusery having approximate height 20.00 No. 10.10

4 to 5 ft or Height ad per Landscaps Plan with natural growith and nature colour

planted in alump of soil packed in polithyline bag or Earthern pot. Including organic

& chemical fertilizer pesticides, fungicides hormones & maintaining the plants uo to

three months as deserted green mahindi

125 Bowing and developing flowering plants grown in nusery having approximate height 10.00 No. 15.15

4 to 5 ft or Height ad per Landscaps Plan with natural growith and nature colour

planted in alump of soil packed in polithyline bag or Earthern pot. Including organic

& chemical fertilizer pesticides, fungicides hormones & maintaining the plants uo to

three months as deserted New block ficus.

126 Labour charges for planting various plantsafter proper anti termite treatment in pits 100.00 No. 40.40

including placing property and filling the pit with requred prepared mix soil and

wetering and dispporting etc complete.

127 Maintance of the garder for 60 days after Complition of 3 month stipulated period is 1.00 Job. 10100.00

completed for plantation o lawn and plants including applying second round of

proper antitermite tretment.

128 Providnig and fixing to wall ceiling and floor 80 Schedule Syntex / Astra (CPCV) or 70.00 Rmt 447.72

equivalent of the following nominal bore tube fittings and clamps the wall ceiling and

floor (C) 40 mm

129 Providing and fixing consealed to wall, ceiling and floor 80 Schedule Syntex / Astral 70.00 Rmt 208.80

(CPVC) or equivalent brand of the following nominal bore tube fittings and clamps

including Making goods the wall ceilling and floor (A) 20 mm

130 Providing and fixing brass screw doen stop cock (A) 15 mm. Dia. 2.00 Rmt 287.85

131 Rubber Hose pope 15 mm dia of approved brand and make 100.00 Rmt 25.25

132 Providnig and fixing G I Nipple as directed. 2.00 No. 20.20

133 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) 75.00 Pt. 485.81

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up

to 10 mtr length , in below type of pipe erected with 6A Modular type switch / bell

push & accessories and earth continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall / ceiling as per

pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat. III

Item Rate In

Description of Item Quantity Unit Amount

No figures

134 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of 69.00 Pt. 674.68

.ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected with 6A Modular type switch and hum free

EME step type electronic fan regulator mounted and accessories with earth

continuity of following type erected on PVC / Metallic/Wooden box, single mounting

base frame covered with textured/metallic/white front plate modules erected on /

in wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as

directed. (f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat. III

135 Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket 20.00 Pt. 257.55

erected on PVC / Metallic/Wooden box, single mounting base frame covered with

textured / metallic/white front plate modules erected on / in wall / ceiling with

following type accessories Cat. III

136 Providing following type of Modular Type Accessories mounted with PVC / 5.00 Nos 151.50

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as per site

situation directed by Engineer In charge. (1)One No. SP 6 Amp. Cat.III

137 Providing following type of Modular Type Accessories mounted with PVC / 5.00 Nos 151.50

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as per site

situation directed by Engineer In charge. (2) One No 5 pin plug Cat.III

138 Providing following type of Modular Type Accessories mounted with PVC / 12.00 Nos 180.79

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as per site

situation directed by Engineer In charge. (9) 16 Amp. SP one way switch Cat.III

139 Providing following type of Modular Type Accessories mounted with PVC / 12.00 Nos 199.98

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as per site

situation directed by Engineer In charge. (10) 6/16Amp. Universal socket Cat.III

140 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked 500.00 Mtr. 82.82

stranded Copper conductor wire in following type of pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of following size (A) With medium

class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq. mm

Item Rate In

Description of Item Quantity Unit Amount

No figures

141 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked 240.00 Mtr. 112.11

stranded Copper conductor wire in following type of pipe to be erected in / on wall /

ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size (A) with medium class Rigid PVC pipe

and accessories (a) 2 wire 4 sq. mm

142 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked 40.00 Mtr. 147.46

stranded Copper conductor wire in following type of pipe to be erected in / on wall /

ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size (A) with medium class Rigid PVC pipe

and accessories (b) 2 wire 6 sq. mm

143 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked 90.00 Mtr. 260.58

stranded Copper conductor wire in following type of pipe to be erected in / on wall /

ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size (A) with medium class Rigid PVC pipe

and accessories (h) 4 wire 6 sq. mm

144 Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi 25.00 Mtr. 91.91

stranded, annealed copper conductor with heat resistant PVC insulated conforms to

IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control

panel, relays, power switchgears, motor starters & control wiring) with required size

of copper lugs, nuts and bolts if required. (f) One wire 10.00 sq. mm

145 Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi 25.00 Mtr. 142.41

stranded, annealed copper conductor with heat resistant PVC insulated conforms to

IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control

panel, relays, power switchgears, motor starters & control wiring) with required size

of copper lugs, nuts and bolts if required. (g) One wire 16.00 sq. mm

146 Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi 10.00 Mtr. 236.34

stranded, annealed copper conductor with heat resistant PVC insulated conforms to

IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control

panel, relays, power switchgears, motor starters & control wiring) with required size

of copper lugs, nuts and bolts if required. (h) One wire 25.00 sq. mm

147 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt 73.00 Nos. 295.93

assembled on single MCPCB, with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high

U.V. & corrosion resistance with diffuser with company mark/name 160V to 270V,

Power Factor more than 0.95, THD < 15%, CCT 3000 K to 6500K, Luminaire efficacy>

85 lumens/watt, LED driver efficiency > 85 % ( fitting required LM-79 & LM-80

Certificates) (NOTE: Below description have shown ranges of Wattage capacity of

ranges shown.) (A) Tube Light with integral driver (iii)20 Watts, Surge - 2KV,IP-20,

conventional 4 feet Cat-III

Item Rate In

Description of Item Quantity Unit Amount

No figures

148 Supplying and erecting led lamps with following wattage capacity of 220 to 240 2.00 Nos. 112.11

voltage, minimum 15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp

holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser suitable LAMP holder

(ii) 5 to 8 watts Cat-III

149 Supplying and erecting LED street light / Flood light fittings with High power White 12.00 Nos 9647.52

LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more than

130 lm/w and corrosion free High pressure die cast aluminum housing with smooth

finish powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED

driver efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED fittings.The Engineer

(IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply with

over-voltage protection. (iv)(vi) above 160 to 200 wattsCat-lll

150 Providing and erecting Approved make Four pole moulded case circuit breaker 2.00 Nos. 6173.12

having breaking capacity ICU of 25 KA. at 415 V,having normal current rating up to

A to 100A. with Fixed thermal & magnetic release suitable to work on A.C. supply

c/s. with all internal connections, spreader tinned copper & complete erected in

existing 16 G.M.S. housing. ICS=100% of ICU only Cat III

151 Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper 1.00 Rmt 1961.42

Busbars with four equal Nos. of electrolyte bus having current density not more than

1.6 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour

insulating tape for phase sequence of following current carrying capacity, erected

with necessary bus bar supports /insulators, main cable socket to each bar, erected in

existing cubical panel with necessary connections. (B) Suitable for 200 Amp. capacity

152 Providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to 48.00 Nos. 112.11

operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with ISI Mark Cat.III

153 Providing & erecting 240 V MCB double pole switch for motor & inductive load (C 3.00 Nos. 330.27

Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having

following capacity (B) 40 Amp. Cat.III

154 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) 6.00 Nos. 737.30

having 10KA breaking capacity & confirms to IS :8828 in existing box having

following capacity (c)63 Amp. Cat.III

Item Rate In

Description of Item Quantity Unit Amount

No figures

155 Providing and erecting Sheet Steel powder coated MCB distribution board - flush / 2.00 Nos. 2913.85

surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to

IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The

DBs should be used of same company of MCB to be used) suitable for (B) three phase

incoming and single phase horizontal type outgoing Per phase isolation type (PPI)

(b) sheet steel double door (ii)6 way

156 Providing and erecting Approved make RCCBs conforming to IS: 12640 and having 6.00 Nos. 2235.13

sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for

operation on single phase 240 V,50Hz. having characteristic of quick action & tripping

with all advance feature & do not incorporate any electronic component. for

following Max. rating erected as directed (ii) 40Amps. DP Cat. III

157 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 33.00 Kg. 794.87

158 Supplying & erecting earth pit of minimum bore dia.150mm size approved make 2.00 Nos. 4591.46

Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of

corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable for following type of

applications with chamber and heavy duty cover. (A)(approved make OEM has to

submit test certificate including value of earth resistance of installation duly stamped

and signed by agency and officer Incharge has to ensure the value of earthing

resistane mentioned in test Certificate) & having back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561-

2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to retain moisture for long time

Necessary test report must be submitted by Agency. (a) For Electrical Installation up

to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Item Rate In

Description of Item Quantity Unit Amount

No figures

159 Providing & erecting weather proof, dust & vermin proof, floor mounted front 2.50 Smt. 10468.65

operated indoor type cubical panel board necessary IP-42 and above protection as

per approval from engineer incharge made from 14 SWG thick CRC M.S. sheet for

outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with

necessary accesories , supporting angles/ flats channel including cutting, bending,

drilling, welding, riveting with internal partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of supplied switch gears, BUSBARS,

suitable size of inter connecting PVC copper wire / copper-aluminium strips, rubber

grommets, rib, bakelite control fuses/MCB for measuring instruments, earth bus &

earth bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors,

handles with locking arrangement and rubber gasket,heavy duty end terminal

connection,danger notice board,necessary ventilation,earthing strip complete. The

Panel shall be painted with epoxy powder coating. (The rates excludes the cost of

switchgears, bus bars, inter connecting mains & Copper Aluminium strips, meters,

Fuses etc. The dimension shall be measured excluding base beams) The panel shall be

supplied with following approved manufacturers with following size. (A) locally

fabricated panel board (i) with 350 mm depth

160 Providing and erecting XLPE(IS:7098) (I)-88 ISI armoured cable multistrand 460.00 Mtr. 220.18

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables (B) 3 1/2 core 35 Sq. mm ( 16 Sq.

mm 1/2 core)

161 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid 300.00 Mtr. 126.25

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables (B) 4 core 6 Sq. mm

162 Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating 450.00 Mtr. 55.55

the fault all over the run and back filling the same and making the surface as normal

163 Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm. below ground across 50.00 Mtr. 226.24

the road crossing or on floor with necessary material in an approved manner and

making the ground as per original. (F) 100 mm dia.

164 Providing & laying approved make Double walled corrugated pipes (DWC) of 450.00 Mtr. 62.62

polyethylene(conforming to IS 14930 II )with necessary connecting accessories of

same material at required depth in existing trench for laying of cable. below ground

/ road surface for enclosing cable (A)50 mm outer dia

165 Providing and, fixing heavy duty flange type brass double compression type cable 2.00 Nos. 75.75

gland with rubber ring for PVC insulated armoured cable complete with out going

tails, insulating tape etc for following size of cables. (B) 3 & 1/2 core 35/50 Sq. mm

Item Rate In

Description of Item Quantity Unit Amount

No figures

166 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of 8.00 Nos. 20.20

following size evenly crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an approved manner. (D) 35/50

167 Supply, Installation, Testing and Commissioning of suitable sweep, BEE 5 Star rated, 69.00 Nos. 2885.57

Ceiling fan with Brush Less Direct Current (BLDC) permanent ferrite magnet Motor,

class of insulation: B, Rust free 3 nos.Aluminium blades, 2 nos. canopies, shackle kit

with earthing provision, copper winding, Power factor not < 0.9, Service Value

(CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM,230v (tolerance

as per IS : 374-2019), THD < 10%, with remote unit for Speed Control and all

remaining accessories including safety pin, nut bolts, washers, temperature rise =

degree C (Max.), suitable for 140 to 285 Voltage and rectifier circuit with surge, over

current and overload protection , 50 Hz, Single phase AC Supply, earthing etc.

Complete as required.[ Make shall be approved by Engineer in Charge] (B) 1200 mm

Sweep (48")

168 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod 69.00 Mtr. 108.07

erected duly painted for fan complete with proper insulation without leakage and

169 Supplying & erecting Fan Hook of 10 mm M.S. Round bar grouted in RCC slab with 69.00 Nos. 43.43

Making the site as original.

170 Supplying & erecting approved make SMC press moulded composite FRP. loop-in, 12.00 Nos. 476.72

loop-out approx. 2mm thick box complete with Bakelite connector strip

5way(3P+N+E),DIN rail for mounting mob & hinged doors as per requirement having

locking arrangements with mounting clamp with nuts, bolts & washers suitable for

erection on pole with cable clamps& earth bolt of following size of box. (C)150mm x

125mm x 100mm [deep]

171 Supplying & erecting approved make Digital time switch having lithium cell 6 years 1.00 Nos. 3168.37

operative and operate battery backup 1 channel day clock with 14 memory

programme, suitable to operate on 240V + 5%, 16A with, floating contacts Minimum

switching setup time 1 minimum & LCD display. Also comprised permanent ON/OFF

switching. Programming switches & housed in fire proof thermoplastic enclosure &

transparent cover erected as required with necessary connection erected as directed.

172 Supplying & erecting power contactor ,AC3 duty for time switch complete erected as 1.00 Nos. 2782.55

per direction Cat III (D) 4 pole 440V 40 Amp.

173 Providing & erecting water cooler having storage capacity 150 Ltr. & cooling capacity 1.00 Nos. 55893.40

150 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of the water should

drop by 15˚C within a hour, The water cooler should be comprising of hermetically

sealed compressor, fan motor, condensing unit, water tank surrounded by

evaporating, coil, thermostats, relay etc.complete with necessary inlet & outlet

connection. The body of water cooler will be made from Stainless Steel.

Item Rate In

Description of Item Quantity Unit Amount

No figures

174 Supplying & erecting reverse osmosis (RO) water purification system with M.S. 1.00 Nos. 77891.20

powder coated pedestal frame, prefilter housing carbon filter suitable buster DC

pump, auto low & high pressure switches with following size of LPH capacity &

erected as directed [D] 100 LPH with 1 phase / 3 phase Raw water pump of 500LPH

@ 2.5kg/cm2 - (1N0 - Kirloskar /CRI/Lubi), Dual media filter 10"x54" - (1 No),

Micron cartridge filter 20" x 2.5" ( 1No), High pressure pump 500LPH @ 10kg/cm2 -

(1No - Shimge /CRI /Lubi), RO Membrane housing with RO membrane of 40*40 -

(1No), RO pressure tube 4" x 1E - ( 1No), 0 - 1200LPH Rotameter -(2 Nos), with

Recovery Rate 50%.

175 Supplying and erecting approved make panel mounting type Digital Voltmeter 1.00 Nos. 1275.63

having 3 digits LED display, 0 to 750 AC Volts range erected on existing panel board

with all connection, wiring etc .with manufacturers calibration certificate.

176 Supplying and erecting approved make panel mounting type Digital Ammeter having 1.00 Nos. 1558.43

3 digits LED display, external CT operated, calibrated for 0 to 1000 Amps suitable to

operate on 500 Volt AC , erected on existing panel board with all connection, wiring

etc .with manufacturers calibration certificate.

500 V on existing panel board with necessary connections.

178 Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 3.00 Nos. 274.72

ratio 15 VA burden erected in existing CRCA box duly secured with insulating

materials connected to the meter

179 Supplying and erecting approved make suitable panel indicator LED type lamp, lens 3.00 Nos. 43.43

cover, complete erected with necessary connections.

180 SITC of Vertical Air Termination Solid aluminium with Base- 10 mm dia and 1000 mm 1.00 Nos. 9416.23

long. Air Termination Base tested for conditioning, Ageing Test & Lightning impulse

current withstand test: 100 kA of 10/350µs waveform in an accredited Third party

laboratory as per 6.3 & 6.4 of IEC 62561-1 2017 protocol with MAST 34mm dia

mm long- Cold Galvanized

181 SITC of 8 mm dia solid Aluminium Conductor for roof top mesh grid and tested as 40.00 Mtr 299.97

per IEC 62561- 2 conducted in the Govt. accredited thirty party laboratory to meet

the requirement of IS/IEC 62305 with Required Accessories - Aluminium Holding

clamp at every 1 mtr distance, Aluminium/SS cross splicer at every crossing of Alu.

conductor, Expansion piece with connectors at every 20 mtr distance, Aluminium

straight Splicer to connect conductors. All Accessories should be tested as per IEC

62561-1 2018 Cl. 6.3 for conditioning & Ageing Test & 6.4 for Lightning impulse

current withstand test: 100 kA of 10/350µs waveform(Ageing & Electrical test )

conducted in a sequence manner & tested in the Govt. accredited Third party

laboratory to meet the requirements of IS/IEC

Item Rate In

Description of Item Quantity Unit Amount

No figures

182 SITC of 10 mm MS Round Solid Conductor having smooth surface Should be tested 40.00 Mtr 728.21

and use exclusively for lightning protection (Vertical Riser/Down Conductor which

shall be concealed in Column OR Flushed on) to meet the requirement of IS IEC

62305 With Accessories - Earthing stud of dimension SS-75mm OD plate with 10mm

dia tail connector used in structural steel ring earthing system to meet the

requirements of IS/IEC 62305. (For Interconnecting the Column and the Terrace AL

Conductor / Strip/Flat), SS Cross Connector to connect Earth fixing point to vertical

raiser/Down conductor, SS Straight Splicer at every 4 Mtr to connect MS conductor in

column, Bonding /Rebar Clamp at every 3 mtr suitable for interconnecting round

conductor with reinforcement inside the concrete for structural earthing system, SS

connector -To connect external conductor 8- 10 mm with earth fixing point. All

Accessories should be tested as per IEC 62561-1 2018 Cl. 6.3 for conditioning &

Ageing Test & 6.4 for Lightning impulse current withstand test: 100 kA of 10/350µs

waveform(Ageing & Electrical test )Conducted in a sequence manner & tested in the

Govt. accredited Third party laboratory to meet the requirements of IS/IEC

183 SITC of 14.2 mm dia 3 mtr long Earth electrode of High tensile steel electrode with 2.00 Per Set 5992.33

250 micron copper bonding & 1 bag of Carbon fill Based environment friendly backfill

tested as per IEC 62561-7 in NABL accredited Laboratory and suitable stainless Steel

double sided clamp. Eco Friendly rust proof heavy duty weather proof Polyethylene

Earth Pit Chamber with following dimensions :254 mm dia (top), 330 mm dia

(bottom) & 260 mm (height). ENERGY AUDIT & SAFETY AUDIT

184 Providing and erecting iron clad cable route marker duly marked with ELE.CABLE of 40.00 Nos 240.38

size 23 cm.X 12 cm. Flushed with ground in cement foundation as directed by

Engineer in charge.

185 Supply, Installation, Testing & Commissioning of following size of Grid Tied Solar 20.00 KW 42455.35

Power Plant with

Solar Panels (ALMM approved ) DCR : Frame Material : Anodized Aluminum alloy

Frame With Twin Wall Profile, Front Cover : High Transmission Low-Iron Tempered

Glass (AR Coated), High efficency and positive power tolerance Pmax: 0/+5, Module

Efficiency should be approx. 18%-21%,DCR panel, Normal operating temperature

45'C, Junction Box with Waterproof IP67 & MC4 Compatible and Enclosed with

Bypass diodes, 100% Electroluminescence test to ensure error free Modules, Thep.

temp. co-efficient of the PV module shall equal or better than -0.45%/degree C. Solar

PV modules of minimum fill factor 75% to be used. Unit Production:- 4 to 5 Unit /kw

/day (Actual)(1Year Avg) With 10 year Product warranty and 25 year Linear Power

Warranty.,

Solar Inverter: MPPT Range: 80-1000 V, Max efficiency: 97.5% - 98.9%, O/p

Frequency: 50/60Hz, Operating Altitude (m) ≤4000, O/p Power Factor: ~1, O/P

THDi: <3%, Operating Tempreture Range: -25~60°C, Anti-islanding Protection:

Item Rate In

Description of Item Quantity Unit Amount

No figures

Integrated, Input Reverse Polarity Protection Integrated, Insulation Resistor

Detection Integrated, Residual Current Monitoring Unit Integrated, Output Over

Current Protection Integrated, Output Short Circuit Protection Integrated, Output

Over Voltage Protection Integrated, Protection Degree: IP65, User Interface LCD &

APP,Datalogger & Communication: GPRS / Wi-Fi, Module Mounting Structure:

Seamless Box Pipe / 'C' Channel of suitable size for rooftop solar installations with

good stability agaist wind & weight load., Hot Dipped Galvanized steel coils. suitable

arrangement for base plate for foundation , solar panel mounting, the structure

should be suitable for carry the load of solar panel,wiring, sprinkler system etc. with

necessary foundation work/wall mount, j bolt, anchor fastner etc. the nut bolt used

for installtion of stucture should be (SS 304) quality. and Balane of System with

necessary Swithgears (Suitabel size and protection of ACDB & DCDB), inter

connecting wiring, earthing system, lightining arrester system, all liasoning work

with various gov. dipartment like state nodal agency,DISCOM & CEIG is included in

agency scope (F) Grid Tied Solar Power System: 101 - 250 kW (3 - phase) (D) Grid

Tied Solar Power System: 26 - 50 kW (3 - phase)

Total Rs.

One crore ninety two lakh one thousand seven hundred seventy two rupees and ninety eight paisa only.

I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in figures and words) of the estimated rate

mentioned above. Amount of my /our

Tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra

1 payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost

4 of difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Executive Engineer

Tapi ( R & B ) Division