Setting up of Video Conference Hall at Directorate of Factories and Boilers Kumarapuram Thiruvanathapuram

Amount

Civil

12.45.1 : Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum plain board conforming to IS : 2095-Part 1

14.1.1 : Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)

13.88 : Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

13.80 : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

13.62.1 : Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .

13.44.1 : Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 sqm)

od280209/2021_2022 : Supplying high back executive chair with simple mechanism electro plated/120mm powder coated TUV-CLASS 4 Gas spring,Armrests upholstered with PU leather. Seat & back upholstered with PU leather. Aluminum Base & Gas lift

od280562/2021_2022 : Supplying of Conference table 18mm particle board with a size of 495x150x75 cm, Table top made of 25mm particle board.

od280563/2021_2022 : Providing and fixing of tile Carpet in the floor area complete as per the engineer in charge.

od280564/2021_2022 : Dismantling and removing of Furniture , Cabins and other debries complete as per the engineer in charge.

od280572/2021_2022 : Supply of executive chair of mild steel based electroplated/coated 330mm, Synchronised simple/multi-function mechanism, Electroplated/powder coated TUV-CLASS 2 Gas spring 120mm, Seat upholstered with PU leathe r& back with soft foam, with aluminium base and gas lift

od280664/2021_2022 : Supplying Comfortable Training Room Chair, with 2.1mm thick powder-coated mild steel frame. Seat & back upholstered with soft foam: Imported fabrics. Writing pad: One-way adjustable plyboard. made with 14 gauge mild steel powder-coated, Mesh ventilated seats with writing board and bag storage facility, Mesh covered with polypropylene back Rest.

od280818/2021_2022 : Providing and fixing of a storage unit with 18mm pre-laminated particleboard in the size of 90X40X75 cm with Swing door and lock.

od280844/2021_2022 : Supply &Installation of TV Unit in the size of 150x40x35 CM with door and lock, made of 18mm pre-laminated particleboard

od280887/2021_2022 : Supply of Microsound Acoustical Wall Panels with square edges made of fiberglass substrate 25mm thick and wrapped on the front side with an acoustically transparent fabric with options of colors – as per shade card for choice of the engineer in charge. Tile size of 600 X 600 mm. installed with metal impaler. Complete as per the direction of the engineer in charge.

od280973/2021_2022 : Providing and fixing of signage logo board in acrylic sheet in the size of 120x90 cm. Complete as per the direction of the engineer in charge.

od281033/2021_2022 : Supplying fabricating and fixing of vertical blinds using with glass fibre fabricated with aluminium rail including all things such as J-type runners plastic spacer, nylon chord, ball chain plastic connector, plastic slot hinges alu-rod clamp and top channel, etc complete including all cost of materials, etc complete.

od281171/2021_2022 : Providing Paneling in door shutter.

Electrification

1.14.1 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire

1.14.2 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

1.14.8 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required4 X 4 sq. mm + 2 X 4 sq. mm earth wire

1.14.9 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required4 X 6 sq. mm + 2 X 6 sq. mm earth wire

1.17.3 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm

1.17.12 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm

1.17.21 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 4 sq. mm

1.21.1 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

1.24.1 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch

1.24.3 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch

1.24.4 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet

1.24.5 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet

1.28.1 : Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.1 or 2 Module

1.28.2 : Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.3 Module

1.28.4 : Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.6 Module

1.28.5 : Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.8 Module

90.10.1.1 : Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )

90.10.1.2 : Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )

90.10.1.3 : Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )

90.10.1.5 : Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )

90.10.1.6 : Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )

1.21.2 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm

2.3.2 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator8 way, Double door

2.5.1 : Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required .(Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)4 way (4 + 12), Double door

2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

2.12.1 : Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.13.1 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.14.2 : Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.15.2 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

od280539/2021_2022 : AIR CONDITIONER: Supply, installation, testing & commissioning of 1.5 Tr inverter type Air conditioner all other accessories required for fixing, etc. complete of good quality and approved make as required at the site. (Brand : (Make - Carrier/Equivalent)

od280540/2021_2022 : Supply, installation, testing & commissioning of 3M tabletop up a box with one socket and switch and all other accessories required for fixing, etc. complete of good quality and approved make as required at the site. (LMR)

od280541/2021_2022 : Supply of 400mm sweep Wall mounting fan of approved make.

90.4.6 : Conveyance, installation, testing and commissioning of wall mounting fans of all types using mounting brackets supplied along with the fan.

od280546/2021_2022 : Supply and fixing Cat6 UTP Patch Cord – 2 Mtr with all other accessories required for fixing etc. complete of good quality and approved make as required at sit

od280547/2021_2022 : Supply and fixing Cat6 UTP Patch Cord – 1 Mtr with all other accessories required for fixing etc. complete of good quality and approved make as required at site.

od280548/2021_2022 : Supply and fixing Cat6 Information Outlet with all other accessories required for fixing etc. complete of good quality and approved make as required at site

od280549/2021_2022 : LED LIGHTS: Supply, installation, testing & commissioning of the following 15 Watt Slim Round LED Panel Light for use on 240 V AC supply and all other accessories required for fixing, etc. complete of good quality and approved make as required at the site. (LMR) (Brand: JV Luker USA/dewton/standard make

od280550/2021_2022 : STABILIZER: Supply , installation, testing & commissioning of 5 KVA V-Guard Automatic Voltage Stabilizer and all other accessories required for fixing etc. complete of good quality and approved make as required at site.(LMR) (Brand : V GAURD/standard make)

od280552/2021_2022 : Supply, installation, testing & commissioning of the following HANGING PROFILE LIGHT :<br>22w - 2200 Lumens 4 Feet Continuous mounting fitting with 50mm width with all accessories for use on 240 V AC supply and all other accessories required for fixing etc. complete of good quality and approved make as required at site.

od280553/2021_2022 : Supply and installation of Laptop - Core i5 11th Gen, 8GB RAM, 512GB SSD, Win 10 Pro, 15”, 2 GB GFX with 3 years onsite warranty of standard make as approved by the site engineer in charge(LMR) Dell/HP

od280555/2021_2022 : Supplying and fixing 1m HDMI CABLE and all other accessories required for fixing etc. complete of good quality and approved make as required at site. (LMR)

od280556/2021_2022 : Supply & providing Capping / Casing of good quality of the following sizes of<br>standard make as approved by the site engineer in charge. (32mm)

od280557/2021_2022 : Supplying and fixing 4P sheet steel enclosure on surface/ recess for fixing<br>Isolator/MCB complete with connections, testing and commissioning etc. as<br>required.(LMR)

od280559/2021_2022 : Supply and fixing 3KVA Online Double Conversion IGBT Pure UPS with 100AH Tubular Battery -6 nos and 120AH Tubular Battery-2 nos along with 2 nos of Battery stand, 2KVA Sinewave Inverter of standard make as approved by the site engineer in charge ( LMR)

od280560/2021_2022 : Supply and installation of 164 cm (65 inches) 4K Ultra HD Smart LED Google TV. of standard make as approved by the site engineer in charge(LMR)

od280561/2021_2022 : Supply and installation of Logitech Rally Video Conferencing System: Rally Camera, Speaker 2 NOS, Mic POD 1 Nos, Table Hub 1, Display Hub 1. With mounting Kit standard make as approved by the site engineer in charge as required. (LMR)

90.6.4.2 : Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.

1.55.3 : Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C

1.53.1 : Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable

od280593/2021_2022 : Supply and installation of Canon DM-E100 Microphone of standard make as approved by the site engineer in charge(LMR)

od280594/2021_2022 : Supply and installation of Tripod with Head of standard make as approved by the site engineer in charge(LMR)

od280595/2021_2022 : Supply and installation of Pop-up Box 3 Module with RJ-45 and HDMI of standard make as approved by the site engineer in charge(LMR)

od280597/2021_2022 : supply of Canon EOS M50 MarkII Mirrorless camera with EF-M15-45mm f/3.5-6.3 IS STM Kit lens

od322901/2021_2022 : Installation and configuration charge Google workspace business plus Edn and laptop or any other necessary devices

od280598/2021_2022 : Installation of Google Workspace Business plus. Edn. (One-year subscription). 250 Participants, Video recording, and 5TB storage. (Price per user/Host)

od280599/2021_2022 : Supply and installation of Additional Rally Mic Pod. of standard make as approved by the site engineer in charge(LMR)

od280601/2021_2022 : Supply and installation of One by Wacom pen tablet – CTL-672 of standard make as approved by the site engineer in charge(LMR)

od280602/2021_2022 : Supplying and fixing of following sizes of medium-class 20 mm Flexible conduit along with accessories in surface/recess including cutting the wall and making good the same in case of the recessed conduit as required.(LMR)

Treistel Innovative Solutions Pvt Ltd

DIMEBAG SOLUTIONS PRIVATE LIMITED

Bidder Name

Namaste Innovations

DIMEBAG SOLUTIONS PRIVATE LIMITED

Treistel Innovative Solutions Pvt Ltd