Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.4 LAccepted-AOC PULINCHOTTIL HOUSE KAYANTIKKARA MUPPATHADAM PO | ERNAKULAM | KERALA | 680667 | ₹8.4 L | L1 | Accepted-AOC ACCEPT |
| 2 | L2₹8.6 L+₹26,814.92 (3.20%)Rejected-Finance NEDUMBASSERY P O ERNAKULAM DIST | ERNAKULAM | KERALA | 683585 | ₹8.6 L+₹26,814.92 (3.20%) | L2 | Rejected-Finance REJECT |
| Sl No | Description | Qty | Unit | SHAJEER P B L1 | SANILKUMAR.A.G L2 |
|---|---|---|---|---|---|
| 1.00BUILDING | |||||
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 379.41 | kg | 194.27 ₹73,707.59 Lowest | 200 ₹75,881.6 |
| 1.00 | OD542541/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.350 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 MPa steel grade, 5?7 microns epoxy primer on both side of the sheet and polyester top coat 15?18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5 x 55 mm) with EPDM seal, complete upto any pitch in horizontal, vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (Modified 12.50) | 30 | sqm | 622.81 ₹18,684.3 Lowest | 643 ₹19,290 |
| 1.00 | OD436958/2025-2026:Providing and fixing rain water gutter semi circular section using 150mm dia 6kgf
PVC pipe including fitting with 32x5mm flat supporting at 1m intervals complete as per the direction of
engineer in charge at site
OD72/21-22 | 6 | metre | 478.78 ₹2,872.68 Lowest | 494 ₹2,964 |
| 1.00 | 50.18.9.17.1:Providing and fixing PVC pipes including fixing the pipe with clamps/ clip at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 6 Kgf/cm2 - External work - Exposed on wall | 6.8 | metre | 291.36 ₹1,981.25 Lowest | 301 ₹2,046.8 |
| 1.00 | 50.9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood | 0.04 | cum | 1,13,059.42 ₹4,522.38 Lowest | 1,16,677 ₹4,667.08 |
| 1.01 | 50.9.4.1:Providing and fixing paneling or paneling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) paneling for paneled or paneled and glazed shutters 25 mm to 40 mm thick using good quality Anjili/ Jack wood | 0.8 | sqm | 2,879.52 ₹2,303.62 Lowest | 2,972 ₹2,377.6 |
| 1.01 | 50.9.3.1:Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f Engineer in- charge. using Anjili/ Jack wood | 1.76 | sqm | 3,230.18 ₹5,698.04 Lowest | 3,334 ₹5,881.18 |
| 1.01 | 10.28:Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) | 281.55 | kg | 767.78 ₹2,16,168.46 Lowest | 792 ₹2,22,987.6 |
| 2.00PAINTING | |||||
Tender Value
₹8.4 L
EMD Value
₹20,930
Closing Date
20 May 2026, 3:00 pmClosed
ME MARADU
ME MARADU , MARADU MUNICIPALITY
282-25/26 Maradu Muncipality- RENOVATION OF VETERINARY HOSPITAL DIVI- 21
2026_LSGD_850871_1
E3-16/2025-26/ME/LID and EW/EKM
Open Tender
Civil Works - Roads
Item Rate
180 days
Maradu Municipality
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,850
₹20,930
14 Aug 2026
14 May 2026
21 May 2026
14 May 2026
20 May 2026
14 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1BUILDING | |||||
| 1.001 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 0.2 | kg | - | - |
| 1.002 | OD542541/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.350 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 MPa steel grade, 5?7 microns epoxy primer on both side of the sheet and polyester top coat 15?18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5 x 55 mm) with EPDM seal, complete upto any pitch in horizontal, vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (Modified 12.50) | - | sqm | - | - |
| 1.003 | OD436958/2025-2026:Providing and fixing rain water gutter semi circular section using 150mm dia 6kgf
PVC pipe including fitting with 32x5mm flat supporting at 1m intervals complete as per the direction of
engineer in charge at site
OD72/21-22 | - | metre | - | - |
| 1.004 | 50.18.9.17.1:Providing and fixing PVC pipes including fixing the pipe with clamps/ clip at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 6 Kgf/cm2 - External work - Exposed on wall | 1 | metre | - | - |
| 1.005 | 50.9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood | - | cum | - | - |
| 1.006 | 50.9.4.1:Providing and fixing paneling or paneling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) paneling for paneled or paneled and glazed shutters 25 mm to 40 mm thick using good quality Anjili/ Jack wood | - | sqm | - | - |
| 1.007 | 50.9.3.1:Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f Engineer in- charge. using Anjili/ Jack wood | - | sqm | - | - |
| 1.008 | 10.28:Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) | - | kg | - | - |
| 2PAINTING | |||||
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1437690.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.06 MB
viewsbd.pdf
Tender Documents • 1.64 MB
viewnit.pdf
Tender Documents • 0.04 MB
BOQ_1437690.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .