PWD Road to Makhalpur_Road_Box Culvert -2x6x3-_At 1.900 km

Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified materials with in all lifts and lead upto 1000 metres etc complete.

Flank dressing to proper camber etc.complete as per direction of Engineer-in-charge

Providin, laying, spreading & compacting graded stone aggregate to to Wet Mix Macadam specification including pre mixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, laying in uniform layers with paver in sub base/base course on well prepared surface & compacting with vibratory roller to acieve the desired density as per clause 406 of MoSRT & H specifications for road & bridge works.(4th Revision)

Providing & applying primer coat with bitumen emulsion on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means as per clause 502 of MOSRT&H Specifications for Road & Bridges work (4th Revision)

Providing & applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20kg per sqm on the prepared bituminous / granular surface cleaned with mechanical broom as per clause 503 of MOSRT&H Specifications for Road & Bridges work (4th Revision).

Providing,laying and rolling of opengraded premix surfacing of 20mm thickness composed of 13.2mm to 5.6mm aggregates with batch type hot mix plant and using 60/70 penetration grade and level to serve as wearing course on a previously prepared base including mixing in a suitable plant,laying and rolling with a smmoth wheeled roller 8-10 tonne capacity, finished to required level and grades as per clause 511 of MoSRT&H Specifications for Road & Bridge Works(4th Revision).

Providing and laying 6mm thick precoated seal coat Type-B using 0.06cum of 6.7mm size chips and 6.80kg of 60/70 penetration grade of bitumen for 10sqm with 100-120 TPH

Construction of Un-reinforced,plain cement concrete pavement M-30 grade over a prepared sub base with 43 grade using brande cement @ 350 kg per cum,coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, spread, compacted finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, admixtures as approved, finishing to lines and grages as per drawing and as per Clause 602 of MoSRT&H specifications for Road & Bridge Works and as per as per specification & direction of the Engineer-in-Charge.

Earth work in hard soil in approved borrow areas including all leads & lifts & carriage with mechanical means on properly prepared & scientifically approved surface including spreading leveling earth in 22.50 cm. layers to make ready for compaction with PRR to bring it upto OMC condition as per specification & direction of Engineer-in-Charge.

Providing and filling manually with selected sand in layers not exceeding 200mm thick including watering and compacting with all leads and lifts etc. For finished item of work as per Specification.