REPAIRMAINT OF LT OH LINES LT PANEL BOARD AND

Amount

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m depth for foundation, laying of cables, etc. and getting out in soft / loose soil. Complete all as specified and directed by Engineer-In-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm depth in soil. Complete all as specified and directed by Engineer-In-Charge.

Removing excavated material (soil ) n.exc 50m and depositing where directed at a level n.exc 1.5 m above ground level. Complete all as specified and directed by Engineer-In-Charge.

M&L for sand cushioning to under ground cables with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable Complete all as specified and directed by Engineer-In-Charge. (Note:-Only pund thickness will be measured and paid.)

Supply and laying sub class 'B' bricks laid across the cable for cable protection, incld taking down old unsv bricks. Complete all as specified and directed by Engineer-In-Charge.

Dismantling steel poles/struts, any size. Complete all as specified and directed by Engineer-In-Charge.

S&F steel tublar swaged pole 9.0 meters long complete erection with cast iron base plate finial taper plug , bolts nuts and screws as specified type 410 SP-31 Complete all as specified and directed by Engineer-In-Charge. Make:-Jindal Steel Product /Bharat Conduit & Steel works Kanpur /Zain Industries Srinagar .

Dismantling cross-arms of M.S. channel or angle sections etc. complete and setting aside for re-use with in 50m. Complete all as specified and directed by Engineer-In-Charge.

Supply and fixing in repairs cross arms ,bracing, support, clamps channals, grill work etc fabricated from structural steel section including nuts bolts and washers of any size or as directed including two coats of aluminium paint over a coat of red oxide primer Complete all as specified and directed by Engineer-In-Charge.

Dismantling of ACSR or AAC conductors service feeder or distributor span. Complete all as specified and directed by Engineer-In-Charge.

S&F ACSR conductor as per IS-398 part-II 1976 complete with 3 % authorised sag on existing poles. Complete all as specified and directed by Engineer-In-Charge.

M&L for cement concrete in foundations filling and mass concrete of type C2 1:3:6 (40mm graded aggregate).Complete all as specified and directed by Engineer-In-Charge.

S & F in repairs MCCB 400 Amps 3 pole 415V of 36 KA and connecting to bus bars and cable end terminations with suitable lugs, Complete all as specified and directed by Engineer-In-Charge. Make:ABB/ Siemens/ Hager.

All as per item No. 13 above but 250 amps 36 KA . Complete all as specified and directed by Engineer-In-Charge.

All as per item No. 13 above but 200 Amps 3 pole 36 KA. Complete all as specified and directed by Engineer-In-Charge.

All as per item No.13 above but 160 Amps 3 pole 36 KA. Complete all as specified and directed by Engineer-In-Charge.

All as per item No. 13 above but 125 Amps 3 pole 25 KA. Complete all as specified and directed by Engineer-In-Charge.

All as per item No. 13 above but 100 Amps 3 pole 16 KA. Complete all as specified and directed by Engineer-In-Charge.

All as per item No. 13 above but 63Amps 3 pole 16 KA. Complete all as specified and directed by Engineer-In-Charge.

Restringing only ACSR conductor of any size and type as directed including binding to insulators, jumpering etc Complete all as specified and directed by Engineer-In-Charge.

Supply and laying GI pipe 80mm dia light grade for cable protection on pole/road/culvert crossing and for on pedestal.Complete all as specified and directed by Engineer-In-Charge.

M&L for LT Cable jointing kit for 1100V grade cable for outdoor straight through heat shrink type joint complete with jointing material and accessories suitable for XLPE armoured aluminium conductor cable of size 10/16 sqmm of 2/3.5/4 core Sqmm. Complete all as specified and directed by Engineer-In-Charge. Make: Polycab/Finolex/KEI /Universal .

All as per item no. 22 above but of size 25/35/50 sqmm of 3.5/4 core. Complete all as specified and directed by Engineer-In-Charge.

All as per item no. 22 above but of size 70/95/120 sqmm of 3.5 core. Complete all as specified and directed by Engineer-In-Charge.

M & L for earthing complete with galvanized earth plate electrode 600 x 600 x 6 mm burried directly in ground vertically to a depth of not less than 2.25 mtr below ground level connected to GI wire of 4 mm dia means of nut, bolts and washers made out of galvanized iron mild steel and 40 mm dia GI pipe "light grade" for protection of earth lead and connected to control board or main switch or as directed by Engineer -in-Charge including earthing pit in PCC (1:3:6) type C1 for chamber & Pre-cast RCC cover of size 380 x 380 x 40 mm with one handle made out of 8 mm dia round bar, 20 mm dia GI pipe light grade for watering funnels , wire mesh and provided charcoal or coke of alternative layers of 15 cm including necessary earth work Complete all as specified and directed by Engineer-In-Charge.

Supply and fixing in repairs GI pipe, bracket for street light fittings made out of 40 mm dia GI Pipe medium grade 1.20 m long bent to required angle/shape with and including necessary clamps, nuts, bolts & washers of suitable size with two coats of aluminium paint over a coat of red oxide primer. Complete all as specified and directed by Engineer-In-Charge.

Supply and fixing in repairs ENDURA CITYLINER NEO 45 W 5700K LED street light made up of pressure die cast housing with toughned glass and individual high power LEDs with secondary optics, IP66 protection and impact resistance of IK07.suitable for pole dia up to 40 mm, Complete all as specified and directed by Engineer-In-Charge. Make:Syska /GE /Philips /Crompton

S&F in repairs cubical type cable junction box of size 260 x 210 x 116 mm fabricated out of 2 mm thick CRCA sheet juction box for street light pole mounted junction box/terminal box suitable for mounting on round pole and suitable arrangement for fixing bracket complete with one MCB 6 amps capacity single pole and suitable to terminate loop in/out cables upto 35 sqmm. Complete all as specified and directed by Engineer-In-Charge.

S&F in repairs cable PVC insulated unsheathed of size 1.5 Sqmm 3 core copper conductor for service connections from junction box to light fitting.Complete all as specified and directed by Engineer-In-Charge. Make: Polycab/Finolex/KEI /Universal .

Dismantling/Taking out insulators any type, any size from LT/HT over head line Complete all as specified and directed by Engineer-In-Charge.

Supply and fixing pin type, porcelain, vitreous, white, brown or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, 65mm dia for 1100 volts grade Complete all as specified and directed by Engineer-In-Charge. Make: Bengal Potteries/ Jayashree/ Mysore Porcelain/ Jaipuria/ Bhel/ Southern Insulators/ WS Insulators.

Supply and fixing shackle type, porcelain, vitreous, white, brown or green insulator including galvanised mild steel straps, washers, insulator bolts, washers and nuts of size 100 x 115mm, 1100 volts. Complete all as specified and directed by Engineer-In-Charge. Make: Bengal Potteries/ Jayashree/ Mysore Porcelain/ Jaipuria/ Bhel/ Southern Insulators/ WS Insulators.

Dismantling of old damaged/ Un-serviceable LT line spacers of any type complete. Complete all as specified and directed by Engineer-In-Charge.

Material and labour in repairs for fibre LT over head line seperators suitable for 4 wires fixing on LT OH lines. Complete all as specified and directed by Engineer-In-Charge.

Material and labour in repairs for Fibre LT over head line seperators suitable for 2 wires fixing on LT OH lines Complete all as specified and directed by Engineer-In-Charge.

M&L for preparation of surface of any type of 8.5/9/11 m long poles and applying one coat of alluminium paint on pole and one coat of white wash to coping, incld painting of brackets clamps and terminal boxes and writing MES No. on poles. Complete all as specified and directed by Engineer-In-Charge.

Cutting branches /plants / bushes obstructing at electric installations including cleaning / levelling / cutting of undue surfaces & disposal of materials upto a distance not exceeding 50m complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs stay assembly (Diameter of stay rod 20 mm) complete, with accessories as shown in electrical plate no.1 (Note :- Loop type insulator, stay clamps, excavation and concrete measured separately)

Supply and fixing in repairs loop type insulators, vitreous porcelain, white, brown or greeen of large size, with overall dimensions 140 mm, clearance of hole 25.5 mm complete all as specified and directed.Make: Bengal Potteries/ Jayashree/ Mysore Porcelain/ Jaipuria/ Bhel/ Southern Insulators/ WS Insulators.

Supply and laying in repairs XLPE insulated PVC FRLS, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area, galvanized steel strip or wire armoured, of size 3.5 core 35 Sq mm. Complete all as specified and directed by Engineer-in-Charge. Make: Polycab/Finolex/KEI /Universal .

All as per item no.40 above but of size 4 core 25 Sq mm .

All as per item no.40 above but of size 3.5 core 50 Sq mm .

All as per item no.40 above but of size 3.5 core70Sq mm .

All as per item no.40 above but of size 4 core 16 Sq mm .

All as per item no.40 above but of size 3.5 core 95 Sq mm .

All as per item no.40 above but of size 3.5 core 120 Sq mm.

S&F in repairs mild steel sheet 3 mm thick alongwith one coat of cream white paint over a coat of red oxide primer with help of spary gun Complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Aluminium bus bar for R,Y, B & N and suitable for existing size Complete all as specified and directed by Engineer-in-Charge.

S&F in repairs post top insulators of 3 to 5 cm height. Complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Amps mtr 0 to 500 Amps capacity 3 phase square/round type including suitable CT set of 3 . Complete all as specified and directed by Engineer-in-Charge.

S&F in repairs volt meter 3 Phase 415 volt square/round type , range 0-500 volt. Complete all as specified and directed by Engineer-in-Charge.

M&L for cement concrete in foundations filling and mass concrete of type C2 1:2:4 (20 mm graded aggregate). Complete all as specified and directed by Engineer-in-Charge.

M & L for removing of damaged steel structure base frame of LT panel board and fabricating new steel structure base frame with equal angle of size 50X50X6 mm thick and screwing with existing panel board. Complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs galvanised steel cradles, guard hexagonal/ rectangular, fabricated with GI wire 3.15 or 4 mm dia. Complete all as specified and directed by Engineer-in-Charge.

Supply and laying in repairs synthetic insulating mat of size 2mX1mX10mm. Complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs on load changeover switch Range 200A, 415V, AC 23A, 4P IEC 60947-3, IS/IEC 60947-3 Conforms to Staggered terminals, Site convertible fuse version for open execution Flip-able handle above 400A Interchangeable dual shaft position with site convertibility along with SS enclosure version require separate cable gland box complete all as specified and directed by Engr-in-Charge. Make :- L&T cat part no.CO22000OSOO type CO2-200 or equivalent in Havells/Legrand.

Supply and fixing in repairs on load changeover switch Range 100A, 415V, AC 23A, 4P IEC 60947-3, IS/IEC 60947-3 Conforms to Staggered terminals, Site convertible fuse version for open execution Flip-able handle above 400A Interchangeable dual shaft position with site convertibility along with SS enclosure version require separate cable gland box complete all as specified and directed by Engr-in-Charge. Make :- L&T cat part no.CO11000OSOO type CO1-100 or equivalent in Havells/Legrand.

Supply and fixing in repairs on load changeover switch Range 63A, 415V, AC 23A, 4P IEC 60947-3, IS/IEC 60947-3 Conforms to Staggered terminals, Site convertible fuse version for open execution Flip-able handle above 400A Interchangeable dual shaft position with site convertibility along with SS enclosure version require separate cable gland box complete all as specified and directed by Engr-in-Charge. Make :- L&T cat part no.CO10630OSOO type CO1-63 or equivalent in Havells/Legrand.

S&F in repairs aluminium thimbles of size 16 Sq mm to 35 Sqmm of 3.5/4 core and including removing burnt thimbles from existing XLPE Cables. complete all as specified and directed by Engr-in-Charge.

S&F in repairs aluminium thimbles of size 50 Sq mm to 95 Sqmm of 3.5/4 core and including removing burnt thimbles from existing XLPE Cables complete all as specified and directed by Engr-in-Charge.

S&F in repairs aluminium thimbles of size 120 Sq mm to 185 Sqmm of 3.5/4 core and including removing burnt thimbles from existing XLPE Cables, complete all as specified and directed by Engr-in-Charge.

Repair/Maintenance, replacement & testing of LED drivers for street lights/ flood lights of capacity 15 Watt to 48 Watt suitable for any make and type LED street lights/ flood light. Complete all as specified and directed by Engr-in-Charge.

Repair/Maintenance, replacement & testing of LED drivers for street lights/ flood lights of capacity 50 Watt to 100 Watt suitable for any make and type LED street lights/ flood light. Complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs cable route marker made out of PCC as per sample with indicating of MES LT cable size. complete all as specified and directed by Engr-in- Charge.

Supply and fixing in repairs danger notice plate of 1.6 mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional shull and bones in signal red colour and fixed with MS clamps, bolts & nuts of approved size of 25 x 20 cm. Complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs anti-Climbing devices, spikes type fabricated out of MS Bars (round square and flat) including nuts, bolts, washers and welding in two halves made to shape to suit the cross section of the pole. Complete all as specified and directed by Engr-in-Charge.

M/S Sky Engineers

M/S Khan Hussain & Co.

M/S TARIQ ENGINEERING WORKS