Renovation of Room by the side of Store Room to convert into Godown for Feed Lab at ICAR-CIFRI, Barrackpore

Amount

DISMANTLING WORK

Dismantling roof including ridges, hips, valleys and gutters etc. and stacking the material within 50 metres lead of : -G.S. Sheet

Dismantling doors, windows and clerestory windows ( steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead -Of area 3 sq.metres and below

Dismantling wood work in frames, trusses , purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead -Of sectional area below 40 sqm centimeters

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge -In cement mortar

Demolishing cement concrete manually/by mechanical means and disposal of material withing 50 metres as per direction of Engineer-in Charge -Nominal concrete 1:3:6 or richer mix

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead

Disposal of building rubbish/malba/similar unserviceable., dismantled or waste materials by mechanical mean, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, behond 50 m initial lelad, for all leads including all lifts involved.

Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-charge

ROOFING WORK

Providing and fixing precoated galvanished iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge ) 0.50 mm (=0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS : 277 , in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns . Sheet should have protecxtive guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in signle length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tappling secrews of size ( 5.5X55 mm ) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces , excluding the cost ofpurlins, rafters and stresses and including cutting to size and shape wherever required.

Steel work in built up tubular (round,square or rectangular hollow tubes etc. ) trusses etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. -Hot finished seamless type tubes

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 13592 Type A , including jointing with seal ring conforming to IS : 5382, leaning 10 mm gap for thermal expansion, i. Single socketed pipes -110 mm diameter

Providing and fixing unplasticised –PVC pipe clips of approved desing to unplasticised-PVC rain water pipes by means of 50X50X50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 ( 1 Cement : 4 coarse sand ) and making good the wall etc. complete.-110 mm

Neat cement punning

15 mm cement plaster on rough side of single or half brick wall of mix -1:4 ( 1 Cement : coarse sand )

Brick work with common burnt clay FPS ( non modular ) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in -Cement mortar 1:6 ( 1 Cement : 6 coarse sand )

PAINTING WORK

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface -Water thinnable cement primer

Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : -Two or more coats on new work

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : -Two or more coats on new work

Finishing walls with Premium Acylic smooth exterior paint of required shade : -New work ( Two or more coats applied@ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm. )

WOOD WORK

Providing wood work in frames of doors,widows,clerestory widows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasterners of required dia & length ( hold fast lugs or dash fastner shall be paid for separately ).-Sal wood

Providing & fixing anodized electro coating aluminium 2 track sliding window windows thickness 1.5 mm frame x 35 x 35 mm windows shutters along with accelic sheet on aluminiu windows necessary lock 7 roller

Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction of EIC -Kiln seasoned and chemically treated hillock wood -35 mm thick shutters

Providing and laying in position cement concrete of specified grade excluding the cost of centerin and shuttering – All work up to plinth level. -1:2:4 ( 1 : Cement : 2 Coarse sand ( zone-II) 4 graded stone aggregate 20 mm nominal size )

Providing and laying vitrified floor tiles in different sizes ( thickness to be specified by the manufacturer ) with -Water absorption less than 0.08% and conforming to IS : 15622, of approved make , in all colours and shades, laid on 20 mm thick cement mortar 1 : 4 coarse sand ) , jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching p pigments etc. complete -Size of Tile 600 X 600

Providing and fixing ISI marked oxidixed M.S. handles conforming to IS : 4992 with necessary etc. complete. -125 mm

Providing and fixing ISI marked oxidixed M.S. sliding door bolts with nuts and screws etc. complete.-300 X 16 mm

Providing and fixing bright finished brass tower bolts (barrel type ) with necessary screws etc. complete -250 X 10 mm

ELECTRIFICATION

Wiring for light point/fan point/exhust fan point/call bell point 15 sq mm FRLS PVC insulated copper conductor single core cable in surface/recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sqm mm FRLS PVC insulated copper conductor single core cable etc. as required. -Group C

ARUP KUMAR DEY

M/S. SABIRIA ENTERPRISE

BEE ROMEN

N-ANJALI ENTERPRISE

A. R. Rural Electricals