Construction of aspirational toilet in ward no-9 back side of Pipli

Dismantling brick or stone masonry in lime or cement mortar under 3m. height including stacking the useful materials for reuse and removing the debris within 50m. Lead

Excavation of Foundation in hard soil with lead & lift etc., including leveling and dressing of bed etc. Complete.

Fiilling in foundation & plinth with sand, incl. watering & ramming as per direction of Engr.-in-charge

P.C:C: (1:4:8) using 4 cm. size H.G. metal (C.B) including the cost of all materials, labour etc complete.

Laterite stone masonry in cm (1:6) in F & P with cost, conveyance, royalty of materials etc complete.

Fly Ash Brick masonry in C.M. (1:4) in founadtion & plinth and super structure having crushing strength not less than 75 Kg / cm2 with dimensional tolerance ± 2%.

12mm thick cement plaster in CM(1:6) over brick work.

16mm thick cement plaster in CM(1:6) over stone work or brick work

12 mm thick cement plaster in CM(1:4) over brick work with cement punning for skirting

12 mm thick cement plaster in CM(1:4) over brick work with cement punning for skirting

R.C.C work of M-25 grade with 20mm and down grade C.B chips including hoisting & laying including Centaring Shutring, cost, carriage and royalty , tax of materials

Office Room

Lintel

ROOF SLAB

Supplying, fitting & placing uncoated HYSD bar reinforcement complete as per drawing and techinical specification with cost, conveyance of rod & binding, wire etc complete.

2.5cm thick grading concrete (1:2:2) on roofslab with 6mm size CBHG chips on NEW work incl. cost, carriage & royalty of all material

Fixing anti skid ceramic tiles in floors,treads or steps & landing on 25 mm thick bed of cement mortar( 1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing complete.

Fixing ceramic wall tiles in dados,skirting & risers of steps on 12 mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing complete .

Painting 2 coats with water proof cement paint including all cost, conveyance & royalty etc complete as per direction of the Engineer-in-charge.

Priming One Coat with approved Primer On New Surfacetc. complete

Supplying & fixing of M.S. fram iron Door Window shutter for door as per approved design with with cost, conveyance of all materials etc. complete. Grill Door

Providing fifting and fixing of Al. door with anodized Al. door section No.9202 as vertical member, 9201 as top member and 9200 as bottom and middle member with frame section as 9221 and 12mm thick pre-laminated board fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour, T&p, hire charges of drilling machine, labour charges etc.complete.

Supplying fitting fixing 4' dia RCC ring of 5' hight with cover including all cost all complete

Supplying, fitting & fixing of Stainless steel of 304 grade in hand railling using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe beacing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. requered for the complete in all respect.

Steel Gate

Provision of water supply to the water tank installed including sinking of 50mm dia No.6 shallow tubewell. Supplying fixing and fixing 3/4" PVC pipe from water point to Overhead tank with all cost

Supplying fixing and fixing 75mm dia PVC SWR pipe ( Type-A)

Supplying fixing and fixing 1/2' Angel

Supplying fixing and fixing 20" orissa pan

Supplying fixing and fixing 100mm P rap

Supplying fixing and fixing 15mm dia pvc tap

Providing 110mm PVC fitting Door Tee etc complete

Supplying and laying of 110mm PVC pipe class-ll(4kg/sqcm)

Supplying all materials, labour, T & P and setting up boring equipments including erection of suitable staging for installation of tube well of required size, dismantling and removing the same after completion of the work including transportation of boring equipments, cleaning & leveling the site, excavation of mud pit, channels etc. all complete as per specifications

Supplying all materials, labour, T & P and drilling pilot bore not less than 102 mm dia. Without casing pipes in all kinds of soils, Sand & rocks for the following depth excluding supply of necessary boring including pipes supply of necessary cutting equipments extra sockets (wherever required) etc. & with drawing boring pipes, washing & keeping the bore clear for logging if required etc. all complete as per specifications.

Supplying all materials, labour, T & P and lowering the PVC casing pipes, fittings and well screens in position including fitting & fixing centralizer, cutter plug and washing the bore as per specifications a) 50mm. dia PVC Pipes

b) 50mm. PVC strainers

iii) 50mm. x 3’.0” G.I. short piece =1no

vi) 40mm x 40mm x 25mm G.I Tee= 1no

vii) 1 ½’’ x 12’’G.I short piece= 1no

ix) Brass checkvalve= 1no.

xvi) T. tape =3nos.

Fixing of 100 mm dia 'P' or 'S' Trap (with horn or without horn)for water closet squatting pan including jointing with trap and pan in cement mortar (1:1) etc all complete as per specification and direction of the E.I.C. 100 mm dia P trap UPVC

100 mm dia S trap UPVC

Supplying all materials, labour, T&P and fixing wash down water closet(E.W.C) with integral 'S' or 'P' trap to the floor with wooden plug and C.P screw including jointing the trap with soil waste pipe in C.M(1:1) etc all complete as per specification and direction of the E.I.C.

Supplying all materials, labour, T&P and fixing of plastic seat cover for E.W.C with chromium plated brass hinges and rubber buffer etc all complete as per specification and direction of the E.I.C.

Supplying all materials, labour, T&P and fixing vitrous China-Half Stall wall urinal Flat back including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification and direction of the E.I.C. Sensor operated wall Urinal (Back Inlet) With Fixing Accessories, Size: 385x325x635 mm (JAQUAR Make, Model: URS-WHT-13253N) and Sensor Concealed Type Flushing Valve for Urinal Complete Set with Installation Box with Control Cock (Battery Operated) (JAQUAR Make, Model: SNR-STL-51087

Supplying all materials, labour, T&P and fixing wash hand basin with hole for pillar tap with C.I/M.S brackets paintedwhite including holes in walls and making good the damages etc all complete as per specification and direction of the E.I.C. Pedestrial for 550mm x 400mm wash hand basin White (Hindware/Parryware/Neycer/CERA)

Inside Toilet Room(small size)

Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C sheet or ply wood sheet and fixed to wooden plugs with C.P screws and washers etc all complete as per specification and direction of the E.I.C. 600mm x 600mm B.E glass mirror

Supplying all materials,labour, T&P and fixing standard sized CP towel rail/ring complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the E.I.C Single Towel Rail 600mm Long, Stainless Steel (JAQUAR Make, Model:ACN-CHR-1111SM)

Supplying all materials,labour, T&P and fixing standard sized CP Soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the E.I.C Soap Dish Holder (JAQUAR Make, Model:ACN-CHR-1131N)

Supplying all materials, labour, T&P and providing Curved shaped urinal partition with 8mm frosted glass Size H: 900mm W: 450mm including fitting & fixing in wall and making good the damages etc as per specification and direction of the E.I. (JAQUAR Make, Model: CJSE-CHR-810UC450X)

Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class KB brick work in CM (1:6) for the remaining height at top, 12mm thick Cement Plaster (1:4) inside and outside over masonry brick work, gravel packing in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C.

Providing and fixing Chlorinated polyvinyl Chloride (CPVC) Pipes (SDR 11) conforming to I.S 15778 having the thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 mtr spacing, this includes jointing of pipes and fittings with one step solvent cement and testing of joints etc all complete as per direction of the E.I.C. (Make: Oriplast/Supreme/Astral/Hariplast/Fenolex & Equivalent) 40mm Outer dia C-PVC pipe(External)

20mm dia CPVC pipe (internal wiring) - GF

15 mm dia C.P Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish and Wall Hook with N.R.V (Back Flow Preventer) (JAQUAR Make, Model: ALD-CHR-579)

15mm dia CP pillar cock (JAQUAR Make, Model: CON-CHR-011KN)

Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:4:8) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest etc all complete as per specification and direction of the E.I.C. 580x440mm orissa pattern Squatting pan (White) (Hindware/Parryware/Neycer/CERA)

i) Pipe= 40ft. @ Rs.25/ft.

ii) Elbows=2nos.

iii) B. valve=2nos.

ix) ¾’’x ½’’ Brass R/S=1no.

xiii) Socket =2nos.

xiv) Tee= 2nos.

xv) V-Guard Motor

Recessed wiring to Light point/Exhaust Fan Point with 1.5 sqmm, FR PVC Insulated single core multistrand copper conductor of ISI marked with 20 mm dia non- metallic PVC flexible conduct with 5 Amp, 250 V Modular type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size,MS box with 1.5 sqmm FR PVC insulated single core multistrand copper conductor and earth wire incouding all accessories and connection as per direction of engineer in charge (Make of wire = Finolex/L&T/ Anchor/ V-Guard) deducting the cost of 2M Box with cover Plate-1 No.) Group A 1.2.1-1.24.2

-do-………Group B 1.2.2 - 1.24.2

-do-………. Group C 1.2.3 - 1.24.2

Supply and Fixing of 4M GI box on surface or in recess with suitable size of Modular base cover cover in front including providing and fixing 3 pin 5/6 amp. Modular Socket out let & 5/6amp. Modular type switch,connection,painting etc. as required (Separate) (1.25.1+1.25.4)

Supply and Fixing of 5/6 Modular Switch & 3pin 5/6A Modular Socket on existing board (Existing) (1.25.1+1.25.4)

Supply, Installation, Testing, and Commissioning of 63 Amp TPN Main switches of following capacity (IS 13940 Part 3/1993 ) on existing surface / wall mountnting and complete with HRC Fuse links, interconnections, earthing, etc. as required as per direction of Engineer in Charge.Make-SEIMENS/HPL/ANCHOR/L&T/HAVELS/C & S/ RK (2.15.3)

Supply, Installation, Testing and commissioning of bulkhead fittings including fixing of 5 watt LED Lamp (Make:Havels with die cast aluminium housing and frosted glass cover).RUGBY

Supply and Fixing of 15W LED Bulb

upply, Installation, Testing and commissionioning of 225mm sweep exhaust fan in the existing opening, including making the hole to suit the size of the above fan making good the damaged comlete, connection,etc. as required.(1.43)(Make: Bajaj/Almonard)

Supply and Fixing of 48" A.C.Cilling fan without regulator including all conections Model:Crompton (jura)/ Usha-(Striker Millenium) /Havells (Velocity/Spark) / Anchor - (XL)/ Orient-(Summer Pride)

S/F of 6 pin 15/16A Modular socket (1.25.5)

S/F of 63A FP MCB

Supplying and Installation of Hand Drier,Shoe Polishing,One Table and One Office Chair