Construction Work of Office & Operating Room at Wtp, At Bardoli, Ta- Bardoli Under Swarnim Jayanti Mukhyamantri Shaheri Vikas Yojana Year 2025-26

NAME OF WORK :- CONSTRUCTION WORK OF OFFICE & OPERATING ROOM

LOCATION :- AT WTP, AT BARDOLI , TA- BARDOLI

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Demolition including stacking of serviceable materilas and disposal

of unserviceable materials with all lead and lift. (i) R.C.C. work

Demolition of Brick work and stone masonry including stacking of

serviceable materilas and disposal of unserviceable materials with 56.70 ₹ 577.92 Cumt. ₹

all lead and lift.(ii) In Cement Mortar

Dismentaling of sheet roofing including ridges, Hips, Valleys,

Gutters etc. stacking of serviceable materilas and disposal of 63.00 ₹ 50.11 Sqmt ₹

unserviceable materials with all lead and lift.(i) G.I.sheet roofing.

Dismentling doors, windows, ventilators etc. (wood or steel)

shutters including chowkhats architraves, holdfasts and other

attachment etc. complete and stacking them within all lead and 13.00 ₹ 263.90 Each. ₹

lift.(ii) Exceeding 3 Sq.M. in area

Excavation for foundation upto 1.5M depth including sorting out

and stacking of useful materials and disposing of the excavated stuff 54.00 ₹ 123.13 Cumt. ₹

up to 50M. Lead (A) Loose or soft soil

Excavation for foundation 1.5M to 3 mt depth including sorting

out and stacking of useful materials and disposing of the excavated 18.00 ₹ 136.47 Cumt. ₹

stuff up to 50M. Lead (B) Loose or soft Soil

Providing and laying cement concrete 1:3:6 ( 1 cement : 3 coarse

sand : 6 hand broken stone aggregate 40mm nominal size ) and

curring complete excluding cost of formwork in (a) Foundation and 11.20 ₹ 3,245.13 Cumt. ₹

Earthwork for embankment including breaking clods, dressing with

all lead and lift (excluding watering and consolidation) (C) From 38.70 ₹ 157.91 Cumt. ₹

Borrow area within 1.0 Km.lead

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers not exceeding

20 cm. in depth consolidating each disposited layer by

ramming and watering.

Providing & Laying controlled cement concrete M-250 and curing

complete including the cost of formwork and Excluding the cost of

reinforcement for reinforced concrete work in (A) Foundation 11.20 ₹ 4,203.62 Cumt. ₹

footing base of column and mass concrete

Item No. & Description Quantity Rate Per Amount

Providing & Laying controlled cement concrete M-250 and curing

complete including the cost of formwork and exluding the cost of

reinforcement for reinforced concrete work in Beam (C) Slabs, 11.10 ₹ 6,433.70 Cumt. ₹

Landings, Shelves, Balconies, Lintel, Beams, Girders and Cantilever

upto floor two level. G.F.

Providing & Laying controlled cement concrete M-250 and curing

complete Including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in Lintel (C) Slabs, 4.20 ₹ 5,928.70 Cumt. ₹

Landings, Shelves, Balconies, Lintel, Beams, Girders and Cantilever

upto floor two level. G.F.

Providing & Laying controlled cement concrete M-250 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in Column (D) 5.20 ₹ 7,280.08 Cumt. ₹

Columns, Pillars posts and struts upto floor two level G.F.

Providing & Laying controlled cement concrete M-250 and curing

complete Including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in Slab (C) Slabs, 10.90 ₹ 6,811.44 Cumt. ₹

Landings, Shelves, Balconies, Lintel, Beams, Girders and Cantilever

upto floor two level. G.F.

Providing TMT Bar FE 500D reinforcement for R.C.C. work

including bending, binding and placing in position complete upto 4107.00 ₹ 77.29 Kg. ₹

floor two level G.F.

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation and 3.70 ₹ 4,596.11 Cumt. ₹

plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(A) Modular

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation and

plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B) 28.70 ₹ 4,874.33 Cumt. ₹

Conventional + Extra for brick work in superstructure above plinth

level upto floor two level (a) Modular

Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:5 85.90 ₹ 610.20 Sqmt. ₹

(1- Cement : 5 -coarse sand ) in foundation and plinth (A) Modular

Providing 15 mm thick cement plaster in single coat on fair side

brick/concrete wall for interior plastering up to floor two level

finished even and smooth in with Floating coat of neat cement. (i)

cement Mortar 1:3 (1 cement : 3 Sand)

Providing 10mm thick cement plaster in single coat on

brick/concrete walls for interior plastering upto floor two level and

finished even and smooth in (i) Cement mortar 1:3 (1-cement:3- 90.30 ₹ 148.76 Sqmt. ₹

sand) Extra over items 58 to 64 for finishing with a floating coat of

neat cement slurry.

Item No. & Description Quantity Rate Per Amount

20 MM thick sand faced cement plaster on walls upto height

10meters above ground level consisting of 12 MM thick backing

coat of Cement Mortar 1:3 (1-Cement : 3-Sand) and 8MM thick 291.80 ₹ 347.42 Sqmt. ₹

finishing coat of Cement Mortar 1:1 (1-Cement : 1-Sand) etc.

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm

(average) base of cement mortar 1:6 (1 cement 6 coarse sand) on

new surface or fixing on existing flooring by adhesive material

including dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing & cleaning the

surface etc. complete for light shade

Providing and laying white glazed tiles 6 mm. Thick in flooring

treads of steps and landings laid on a Bed of 12 mm. Thick cement

mortar 1:3 (1 cement : 3 coarse sand) pointing in white cleaned 20.60 ₹ 900.24 Sqmt. ₹

jointed with white cement slurry

Providing and laying Dark Telephonic Black Granite Slab 1 side

Polished 18 mm thick in Door, Window risers of steps,skirtingDedo

and pillars laid on 10mm thick cement mortar 1:3 (1-Cement : 3 39.30 ₹ 2,916.88 Sqmt. ₹

coarse sand) and jointed with gray cement slury mixed with pigment

to match the shade of slab including rubbing and polishing etc.

Providing throating of plaster drip and moulding to R.C.C. Chhajja.

Providing wood work in frames of Doors, windows cleare story

windows and othersimilar works wrought, framede and fixed in 50.00 ₹ 610.23 10 Cudm. ₹

position. (A) Indian Teak Wood

Provoding and fixing flush door shutters, solid core construction

with frame of first class hardwood with cross board and face veneer

or plywood face panels, including anodised alluminium butt hinges

with necessary screws. (B) Non-decorative type and block board 25.30 ₹ 1,829.74 Sqmt. ₹

core anodised alluminium butt hinges in flush door shutters (2)

Providing and fixing window having extruded aluminum Colour

anodized section frame main outer size 95mm x 24mm x 1.17mm

(of Jindal Section no:2459 @ wt.of 0.738 Kg/mt), horizontal Three

track member size 92mm x 31.75mm x 1.30mm (of Jindal Section

no:8688,@ Wt.1.07 Kg/mt), vertical member of size 92mm x

31.75mm x 1.50mm (of Jindal Section no:8933,@ Wt. 1.06 Kg/mt)

with sliding shutters of horizontal member size 40 mmx18mm 15.20 ₹ 1,583.95 Sqmt. ₹

x1.29mm (of Jindal Section no:8947@ wt.of 0.456 Kg/mt), vertical

member of size 40mm x 18mm x 1.29 mm (of Jindal Section

no:8949 @ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze

colour tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame as per

Item No. & Description Quantity Rate Per Amount

Providing and fixing M.S. grills of required pattern to wooden

frames of windows etc. with M.S. flats at required spacings and

frame alround, square or round bars with round headed bolts and

nuts or by screws (B) Ornamental Grill.

Applying priming coat over new steel and other metel surface after

and including preparing the surface by throughly cleaning,

oil,grease, dirt and other foreign matter and scoured with brushes 61.70 ₹ 36.74 Sqmt. ₹

fine steel wood, scrapers and sand paper with ready mixed priming

paint brushing red lead.

Painting two coats (excluding priming coat) on new steel and other

metal surface with enamel paint, brushing, interior to give an even

shade including cleaning the surface an even shade including 61.70 ₹ 92.20 Sqmt. ₹

cleanicn the surface of all dirt, dust and other foreign matter.

Wall painting (two coats) with plastic emulsion paint of approved

brand and manufacture on undecorated wall surface to give an even

shade including throughly brushing the surface free from mortar 818.30 ₹ 83.36 Sqmt. ₹

droppings and other foreign matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains of 818.30 ₹ 120.26 Sqmt. ₹

loose powdered materials.etc complete

Providing and fixing PVC SWR Nahni trap IS 14735 for drain -

mm diameter with jali of the following nominal diameter of self

cleansing design with C.I scread down or hinged grating including 6.00 ₹ 599.64 No. ₹

the cost of cutting and making good the walls.

Providing and fixing S.W. gully trap with C.I. grating brick masonry

chamber and water tight C.I. cover with frame of 300mm x 300mm

size (inside) with standard weight.(i) Square mouth traps. (A)

100mm x 100mm size P type.

Constructing brick masonry chamber for underground C.I.

Inspection chamber and bends with briocks having croshing

strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame

(Light duty) 455mm x 610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.)

and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1- 3.00 ₹ 2,932.93 No. ₹

cement :2- coarse sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm thick with cement

mortar 1:3 finished smooth with a floating coat of neat cement on

walls and bed concrete etc. complete.(i) Inside dimensions 455mmx

610mm and 450mm deep for single pipe line.

Providing and fixing screw down bib taps of following size. (A)

Brass screw down bib tap polished bright. (i) 15mm dia. 5.00 ₹ 186.83 No. ₹

Item No. & Description Quantity Rate Per Amount

Providing and fixing Gun metal check or non-return fullway wheel

valve.(D) 32mm dia.

Providing and fixing wsh down water closet (European type, W.C.

Pan) with integral P or S trap including jointing the trap with soil

pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover 2.00 ₹ 1,356.81 No. ₹

to be measured and paid for separately) (A) vitreous China Pattern

:(i) in white colour

Providing and fixing 12.5 Litres low level flushing cistern with a

pair, of C.I. or Mild brackets, complete with fittings such as lead

valve less syphon, 15mm nom.nal size brass ball valve with

polythene float, C.P brass handle unions and couplings for

connections, with inlet, outlet and overflow pipes, 40mm dia. 2.00 ₹ 2,370.39 No. ₹

porcelain enamelled flush bend including cutting holes in walls and

making good the same connecting the flush bend with cistern and

closet (overflow pipe to be measured and paid for separately) (A)

Vitreous China (I) In white colour

Providing and fixing G.I. inlet connection for flush pipe with W.C. 2.00 ₹ 46.44 No. ₹

Providing and fixing plastic seat and cover for wash down water

closer with C.P. brass hinges and rubber buffers. (B) Black plastic 0.00 ₹ 291.33 No.

seal and cover.

Providing and fixing washbasin with single hole for pillar tap with

C.I. or M.S. brackets painted white including sutting holes and

making good the same but excluding fittings.(A) Vitreous China:(ii) 3.00 ₹ 1,533.32 No. ₹

Flat Back washbasin 550 mm x v 400mm size. (i) In white colour.

Providing and fixing Urinal of approved quality including

connection with trap and with integral longitudinal flush pipe.(A) 3.00 ₹ 1,640.22 No. ₹

Squating plate pattern white earthenware 550mm x 300mm.

Providing and fixing C.P. brass waste for washbasin or sink. (A)

Providing and fixing chromium plated brass half trun flush cock of

approved quality including fixing in pipe line etc. complete. (ii) 3.00 ₹ 263.77 No. ₹

Providing and fixing C.P. brass shower rose with 15mm or 20mm

inlet. (A) 100mm dia. Each 3.00 ₹ 282.16 No. ₹

Providing erecting and fixing double coated (ISI) water tank of

required capacity each with all necessary fittings and connection etc. 4000.00 ₹ 3.95 Litr. ₹

complete on terrace.

Item No. & Description Quantity Rate Per Amount

Providing, laying and jointing in true line and level 110 diametre

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain

and other end socketed with rubber ring, & fittings conforming to

ISI 14735-1999 of approved make for drainage system pipe line,

pipe shall be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp of the size 110 mm

diametre x 149 mm length x 145 mm heigh at every 2000 mm center

to center or shall be concealed in walls as directed including

necessary fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent cement including

cost of all materials. 110mm Dia. Bath Pipe 10.00 ₹ 878.57 Rmt. ₹

Providing laying and jointing in true line and level 15mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be concelled

as directed including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent, including cost

of all materials.

Providing laying and jointing in true line and level 25mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be concelled

as directed including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent, including cost

of all materials.

Providing laying and jointing in true line and level 32mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be concelled

as directed including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent, including cost

of all materials.

Providing laying and jointing in true line and level 40mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be concelled

as directed including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent, including cost

of all materials.

Item No. & Description Quantity Rate Per Amount

Providing laying and jointing in true line and level 50mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be concelled

as directed including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent, including cost

of all materials 50mm 10.00 ₹ 195.67 Rmt. ₹

Providing, laying and jointing in true line and level 160 diametre

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain

and other end socketed with rubber ring, & fittings conforming to

ISI 14735-1999 of approved make for drainage system pipe line,

pipe shall be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp of the size 160 mm

diametre x 210 mm length x 196 mm heigh at every 2000 mm center

to center or shall be concealed in walls as directed including

necessary fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent cement including

cost of all materials.

for spetik tank & drainage 160mm 5.00 ₹ 834.38 Rmt. ₹

Point wiring for Light / Fan/ Bell/ Primary Point with 2-1.5 sq. mm

& earth wire of 1.5 sq. mm (green) both are of ISI marked 1.1 kv

grade FRLS PVC insulated multi strand copper wires upto max

length of 10 mt, in below type of pipe erected with 6A Tissino Type

ISI marked flush type switch / bell push and accessories erected on

Metal / PVC/Wooden Box covered with 3 mm thick 65.00 ₹ 472.68 Point ₹

PC(Polycarbonate) /Acrylic/Laminated sheet. with necessary Lamp

holder/ceiling rose / H.D.Connector as directed. (b) with 16 Swg (

1.6 mm) HGS metal Conduit Pipe and assessories painted black

erecting flushed on wall/ceiling complete.

Point wiring for Independent 6/16 plug and 16A with 2- 4 sq. mm

& earth wire of 2.5 sq. mm (green) both are of ISI marked 1.1 kv

grade FRLS PVC insulated multi strand copper wires upto max

length of 10 mt, in below type of pipe erected with 6A Tissino Type

ISI marked flush type switch / bell push and accessories erected on

Metal / PVC/Wooden Box covered with 3 mm thick

PC(Polycarbonate) /Acrylic/Laminated sheet. with necessary Lamp

holder/ceiling rose / H.D.Connector as directed. (b) with 16 Swg (

1.6 mm) HGS metal Conduit Pipe and assessories painted black

erecting flushed on wall/ceiling complete.

Item No. & Description Quantity Rate Per Amount

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming to

IS: 513/CRCA/aluminium pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser housed in aluminium

casted body with company mark/name 160V to 270V,Power Factor

more than 0.95, THD < 15 %,CCT 3000 K to 6500K, Luminaire

efficacy> 85 lumens/watt ,LED driver efficiency > 85 %( fitting

required LM-79 & LM-80 Certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the

(A) Square/ Circular shaped Surface/RecessedMount Downlight

with provision for spring loaded mounting clips complete.IP20, (iv) 30.00 ₹ 758.51 Each ₹

22-24 watts, Surge-2 KV, Catt-III

Supplying and erecting approved make oscillating type medium duty

bracket fan with Aluminium Blades A.C. 23OV. 50cy/s, with

thermal over load protection wall mounted with height adjustment

and rotary tilting device complete with guard, pull cord for

speedand oscillation flexible Core plug top complete erected with

lead wires as directed. (a) 450mm

Supplying & erecting approved make low noise decorative exhaust

fan having square frame ABS body with inbuilt lowers & square 3.00 ₹ 1,366.53 Each ₹

frame. 200mm with 1350 RPM Cat.II

Providing and fixing eco-friendly light weight calcium silicat false

ceiling tiles having Tegular edge & 15 mm Thick Densified edges

on the Tile Periphery for Extra Strength The Light weight calcium

silicate ceiling tiles shall have , light reflection 85% non-

combustible as per B.S. 476 part IV, 100% humidity resistance and

also having thermal conductivity0.043° w/m KC.for the best thermal

Insulation . The Light weight calcium Silicate tile shall be of

approved texture Fine fissured/ Spintone/ Cosmos having NRC

value of 0.5 & Globe having NRC value of 0.75 NRC or equivalent

of size 595 X 595 mm to be laid on true horizontal level suspended

inter locking metal grid of hot dipped galvanized steel sections

(galvanizing @120 grams per sqm including both side) consisting of

main ‘T’ runner suitably spaced at joints to get required length and

size of 24X38mm made from 0.30 mm thick (minimum) sheet,

1200mm centre to centre, and cross ‘T’ of size 24X28mm made out

of 0.33mm (Minimum) sheet spaced 1200mm along spaced between

main ‘T’ at 600mm centre to centre to form agrid of 1200X600mm

and secondary cross ’T’ of length 600mm and size 24x28mm made

of 0.30 mm thick (Minimum) sheet to be interlocked at middle of

the 1200X 600mm panel to form grid of size 600X600mm resting

on periphery walls/partitions on a perimeter wall angle pre-coated

steel of size (24X24X3000 mm made of 0.40mm thick (minimum)

sheet with the help of rawl plugs at 450mm centre to centre with

25mm long dry wall screws @ 230mm interval and laying 15mm

thick Densified edges light weight calcium silicate ceiling tiles of

approved texture (Fine Fissured/Cosmos/Spintone) in the grid

including, cutting /making opening for services like diffusers, grills,

light fittings, fixtures, smoke detectors etc.

Item No. & Description Quantity Rate Per Amount

, wherever required, Main ‘T’ runners to be Suspended from ceiling

using G.I. slotted cleats of size 25X35X1.6mm fixed to ceiling with

12.5mm dia and 50mm long dash fasteners, 4mm G.I. adjustable

rods with galvanized steel level clips of size 85X30X0.8 mm,

spaced at 1200mm centre to centre long main ‘T’ bottom exposed

with 24mm of all T-sections shall be pre-painted with polyester

baked paint, for all heights, as per specifications, drawings and as

directed by engineer-in-charge.

Providing and erecting Inverter Based approved make split air

conditioning unit consisting of copper condensing unit with variable

spped fan motor, inverter type hermetically sealed rotary compressor

with accessories etc.duly connected separately erected evaporating

unit and blower motor with its accessories by means of extra

supplied proper insulated copper tubing, drain PVC pipes suitable 3.00 ₹ 38,362.83 Each ₹

for ( Eco Friendly green gas charging, 15A plug top & Remote

Control) with necessary core cutting. For 4/5 star Rating of current

year 1 Tonn Capacity (R&B Electric SOR Year 2023-24, For 4/5

star Rating of current year, 8-3-2-(A) - 1 Premium Category)

Supplying and erecting insulated pair of soft copper tubing open or

concealed including power and control cable, necessary PVC drain 30.00 ₹ 965.56 Rmt ₹

pipes for Split AC machine up to 4 TR capacity

Supplying and installing MS angle , powder coated / Painted

standard type of wall/floor stand mount for outdoor unit of split AC

of following capacity, erected with necessary hardware materials as 3.00 ₹ 1,510.96 Each ₹

OFFICE TABLE (Size 1.50 x 0.75 x 0.90 & 2.75 x 0.75 x 0.90)

Providing & fixing Work top of 750mm depth is consist of 18mm

thick waterproof plywood board & inside covered of 1mm thick

laminate and outside decorative 1mm thick laminate protect from

warping and side edges of laminate are lipped beading with the help

of automatic lapping machine. top plywood of sandwitch and 5.40 ₹ 23,179.50 Cumt ₹

around edge of 1mm thick laminate and top ply cantilever brackets

and CPU stand, drawar with S.S. telescope channel, S.S. Hinges,

S.S. Handle, Magnate with Key board tray with bottom foot rest

with all supports of 18mm thick waterproof plywood with fevicol

As per the instruction of Architect / Consultant.

MODULAR SIDE UNIT (File Rack)

Providing & fixing Side storage unit of Size : 1200 x 450 x

mm. consist of all mamber of 18mm waterproof plywood board with

S.S. hinge door fitted with haffle hinges or sliding on nylon roller.

Drawer front will be made of same particle board and provided with

lock and key. The top of the storage will be made of post form

laminated matching with the work top. At the bottom of the storage

4" legs are provided to keep above the floor level.

Item No. & Description Quantity Rate Per Amount

High Back Revolving Chair With Arm, Upright locking, Pedestal

Base Stainless Steel, Armrest Material Aluminium, Seat material

Metal, Backrest is made of One piece injection moulded frame,

Density of PU foam used in seat KG per Cu Meter (± 3) 55, Twin

wheel castor material Nylon, Number of twin wheel castor 5 Nos.,

Backrest & Seat upholstered with Leatherette, GSM/Thickness of

fabric ±5%(Gram/Square meter) 250 gram, Overall width 610 mm,

Backrest Height 200 mm, Seat Height ±10 mm 460 mm, Seat Width

±10 mm 440 mm, Seat Depth ±10 mm 410 mm Gem Portal

Low Back Revolving Chair With Arm, Chrome plated MS, Armrest

Material Polypropylene, Seat material Pressed and moulded with PU

foam, Backrest is made of Two pieces injection moulded frame

Density of PU foam used in seat KG per Cu Meter (± 3) 45, Height

Adjustment ± 5(mm) up to 90 mm, Back type Push Back, Backrest 8.00 ₹ 5,544.90 Nos ₹

upholstered with 100% Polyester Fabric, Seat upholstered with

100% polyester fabric, GSM/Thickness of fabric ±5%(Gram/Square

meter) 290 gram, And Design of Gem Portal

Providing & fixing of Roller Curtain Opening style 1. Roll up / Roll

down Mounting arrangement Bracket systems – to install functional

roller blind mechanism Types of roller blind Blackout roller blind

Shading solution Single roller blind – utilise one layer of fabric

(called outer layer) Operating mechanism Side winders (that lock

the manually adjustable blinds at different levels with the internal

ratchet and tension adjusted by spring inside the tube) Roller blind

fitting option Outside mount (Arc fit) – that fits over the window

frame Type of bottom rail Round Supplier to perform Installation

and commissioning No

MECHANISM MATERIAL

Control unit made up of High strength reinforced plastic PVC

Installation Bracket type “ L ” brackets Installation Bracket made up

of Mild steel with white powder coated Spring made up of

Rustproof High carbon steel springs Top roller type Aluminium

pipe with groove (to fix the fabric in the groove) Head rail made up

of Aluminium exclusion rail powder coated Chain type Endless

beaded chain Chain material 4.2 mm plastic bead moulded on

mm thick polyester coat Pitch of the beads 6 mm Roller tube made

up of Anodized extruded tube of high strength alloy Inner

diameter(id) 38 mm (id) Wall thickness of roller tube 2 mm

End plug Polyester reinforced plastic Bottom rail made up of

Aluminium extruded rail with groove Cassette made up of

Aluminium extruded rail Finish of exposed portion Glossy Powder

coating minimum thickness 50 microns Cassette/ pelmet front side

shall be matching to the fabric No

Fabric material Polyester + Viscose Fabric Patterns Plain Fabric

Weight in GSM (± 10) 270 gram Light blocking percentage of outer

layer (in case of Single and dual roller blinds both) 95 percent Light

blocking percentage of inner layer (in case of dual roller blinds 13.50 ₹ 7,575.00 Sqmt ₹

only) Hint : select ‘0’ in case of Single roller blinds 0 percent

Colour fastener to light (Rating range) 6.75 diretced by Engineer-in-

Item No. & Description Quantity Rate Per Amount

Providing and fixing STORAGE CUB BOARD overall size of

1.50x1.83 materials of all prood 18mm thick Outer side plywood

frame with 18mm thick plywood self and 18mm thick plywood door

inside all face 1mm thick laminate and out side decorative laminate 13.75 ₹ 4,141.00 Sqmt ₹

S.S. Handle, Fevicol, necessary fixture and fastening (S.S.

Hardware) required handle, hinges, manget & locks with battern

patti complete including of all materials, labour diretced by

Engineer-in-charge.

Single Girder HOT Crane: Providing, Supply, installation, testing &

commissioning single girder type HOT crane with geared travelling

trolley with seven meter lift complete with manually operated chain

pulley block, long travel rail track (40 mm sq. bar), moving or cross

girder, brake, safety device etc. & tested to 50% overload. 1Tonne

capacity, 0m.-6m. span, 12m. long travel, 6m.-10m. lift

Providing corrugated G.I. sheet of class-3 roofing fixed with

glavanished iron J or L Hooks, Bolts and nuts 8mm diameter with

bitumen and G.I. limpet washer or G.I. limpet washer. filled with 25.19 ₹ 734.19 Sqmt ₹

white lead complete excluding the cost of purlins, Rafters and

Trusses.(1) 0.80 mm thick sheet.

Total Amounts Rs. ₹

Total Amounts Rs. ₹

Say Amount Rs……….. ₹

I/We am/are willing to carry out the work @ ________% Above Below __________ Percentage (should be

writen in figures and words) of the Estimated rates mentioned above amount of my / our Tender works out as under.

Estimated Amount Estimated Amount

Put to Tender Rs. 28,34,169.00 Put to Tender Rs.

Add % Rs. Deduct % Rs.

Total Rs. Total Rs.

(In Words (In Words

Stamp with Signature of Contractor

Consl.Engineer Engineer

"DESIGN POINT" Bardoli Nagarpalika

Bardoli Nagarpalika