CERTAIN B/R AND E/M REPAIR WORKS TO 164 MH AND OTHER FD HOSPITALS UNDER GE (NORTH) BINNAGURI

Amount

Disconnecting existing water tanks and setting aside exceeding 500 ltrs and n.exc 1000 ltrs and Refixing the same in the same place after carrying the roof treatment complete all as specified and as directed.

Dismantling water tank exc 500 & n.exc 1000 ltr capacity and removing to store complete all as specified and as directed.

Supply and fixed rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, hoisted and fixed in position complete all as specified and as directed.

S&F 20mm dia PVC ball cock (PVC float valves) complete high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut complete all as specified and as directed.

S&F in repair 20mm dia PVC ball cock (PVC float valves) complete high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut complete all as specified and as directed. .

Dismantling floor, hearth or wall tilling including cement mortar being (but not backing), and rubbish off the premises complete all as specified and as directed.

Demolition of cement concrete (unreinforced) including existing treatment of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for 75mm thick cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in sub base complete all as specified and as directed.

M&L for non skid ceramic tiles of size 400x400x7mm thick in floor etc set & 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed.

M&L for 300 x 450mm glazed ceramic coloured tiles in vertical surface not less than 7 to 8 mm thick set and jointed in neat cement slurry laid over 10mm thick rendering in cement mortar (1:4) and pointed in white or coloured cement to match etc complete all as specified and as directed.

M & L for non skid coloured ceramic floor tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n exc 0.38 sqm, in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed.

M&L for Virified Ceramic tiles light shade 8 to 9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles as in floor and including 15mm thick screed bed or bedding layer in CM 1:6 etc complete all as specified and as directed.

M&L for Virified Ceramic tiles light shade 8 to 9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles as in floor and including 15mm thick screed bed or bedding layer in CM 1:6 etc complete all as specified and as directed.

M&L for 25 mm thick prepolished chequered tiles of size 300 x 300 mm set and jointed in neat cement slurry including 15mm thick screed bed in CM(1:4) and pointed in white or coloured cement mixed with mixture of pigments to match with the colour of tiles including demolition of existing floor tiles complete all as specified and as directed.

M&L for 60 mm thick precast concrete prepolished coloured interlocking paver block with grery cement and pigment, any shape and size confirming to IS 15658-2006, M-40 Grade complete all as specified and as directed.

M&L for sand filling as sand cushioning under interlocking pavor blocks complete all as specified and as directed.

M&L for granite work 18-20 mm thick table rubbed and polished as in top of kitchen slabover 15 mm thick cement screed bed cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for rounding to edge of stone, Granite slab, kota stone slab one edge, such as in steps, cooking platform, and other similar work complete all as specified and as directed.

S&F in repair powder coated aluminium window sliding type three track (one gauge and two glazed shutter) aluminium sections weighing not less than 0.55 Kg per mtr for shutter and aluminium sections weighing not less than 1.67 Kg per mtr for frame including necessary jointing cleats, glazing cleats, rubber packing, screws, handle, locking arrangement etc complete and 4 mm thick tinted glass and stainless steel mosquito proof gauge complete all as specified and as directed.

S&F powder coated aluminum louvered ventilators of size n.exc 0.50 Sqm area with glass louvers, without sash bars of aluminium sections weighing not less than 0.605kg/m for frame of size 40x20x2mm including necessary jointing cleats, glazing cleats, rubber packing, anodised aluminium snap beading, scews, anodised aluminium fittings and 4mm thick frosted tinted glass fixed in panels with suitable locking arrangements including taking down of old existing steel ventilator and making good disturbed surface of wall complete all as specified and directed.

Suppy and fixed in repair powder coated anodised glazed aluminium sections weighing 0.55kg/m made of Square/tubular Aluminium section for partition with one or more rebates complete all as specified and as directed.

M & L for 12 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to aluminum frame work as in partition complete all as specified and as directed.

S&F in repair 5.5mm thick Sheet glass, ordinary quality, fixed with existing snap beading, rubber gasket etc. area of each pane exc. 0.50 sqm complete all as specified and as directed.

Supply & Fixing in repair powder coated anodised aluminium frame (sections weighting not less than 1.40 kg/mtr) made of Square/tubular Aluminium section for door with one or more rebates jointing cleat for fixing etc and provision of aluminium door shutter (Single/Double shutter) including necessary jointing cleats glazing clips, rubber gasket aluminium anodised snap beading, screws, hold fast, Aluminium hinges 3Nos 100mm long for each shutter, floor stopper, locking arrangements handle 4 mm thick tinted glass fixed in panels complete and all as directed.

S&F factory made pressed steel windows of standard size and section as shown on HQ CE Siliguri Zone Drg No CESZ/2018/TD-07, Sheet 1/3 to 3/3 with double shutter i.e glazed & wire gauged shutter including all fittings and fixture like MS hold fast, box hinges, handles, MS tower bolts, stoppers, MS guard bar/grill etc complete including one shop coat of anti corrosive zinc chrome primer complete all as specified and as directed. Notes:- (a) Rate quoted shall be deemed to be including of all fittings fixtures . (b) Glass, wire mesh and painting shall be measured and paid separately under relevant items of this schedule. (c) PCC (1:3:6) type C1 to be filled in chowkats frame and paid under relevant item of this schedule.

All as per Item No 25 above here-in-before but with single shutter of glazed/wire gauged shutter including one shop coat anti-corrosive zinc chrome primer complete all as specified and as directed.

S&F Mild steel framed work such as grills, gratings, guard bar etc with ends of bars shouldered or riveted or for forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290. Gde -E- 165 complete all a specified and as directed.

S&F of 4mm thick figured/sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all a specified and as directed.

S&F of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed.

S&F mild steel work in in roof truss trusses purlin, brackets, cleats posts etc complete using Fe 410-w (gde E-250) Quality A including welding complete all as directed as in additional stiffners and wind ties complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 0.5mm thick of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F prepainted Galvalume Aluminium Zinc Coating GI based Plain Steel Sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in eves board, valley gutters, curves, ridges, corner boards etc., fixed with self tapping screws complete all as specified and as directed.

S&F in repair powder coated glazed aluminium portion with aluminium sections weighing 0.55 Kg/M and panel not exceeding area of 1.50 Sqm including necessary joining cleats glazing clips, rubber neoprene packing, beading screw, etc including necessary drilling in walls, floor & ceiling (minimum thickness of powder coating 50 micron) including 12 mm thick prelaminated particle board fixed in panel /5.5mm thick tinted glass complete all as specified and as directed

S&F in repair solid PVC wall lining consisting of 5mm thick single side prelam wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame including 5mm thick PVC sheet fillet of width 35mm as per specifications and drawing complete all as specified and as directed.

M&L for 5mm thick PVC sheet fillet of width 35mm as per specifications and drawing complete all as specified and as directed.

M&L for two coats of synthetic enamel painting over a coat of red oxide primer to steel surfaces any description over 10 Cm in width or girth not otherwise described including preparation of surfaces complete all as specified and as directed..

Taking down chowkat or frame n.exc 1.5 sqm each with shutters (without taking off shutters from the frames) including building hardware etc including removing material from work site complete all as specified and as directed.

S&F solid PVC door frame of size 50 X 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed in repair in opening as per specifications and drawing complete all as specified and as directed.

S&F factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail, MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; Paneling of plain color PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement, Supplied and Fixed in the frame at site as per specification and drawings complete all as specified and as directed.

Taking down of chowkat including shutter area exc 1.5 sqm but n.exc 4 sqm with shutters (without taking taking off shutters from the frame) building hardware etc including removing material from work site complete all as specified and as directed.

Taking down shutter of area exc 1.00 sqm but n.exc 2.00 sqm each etc including removing material from work site complete all as specified and as directed.

M & L for framed work as in doors frame of angle or other section conforming to Fe 410-W(Gde-E- 250)quality-A with gusset plates, rails, braces, etc., and including fixing of steel hinges or other door fittings complete all as specified and directed. (Note: Door fittings like hinges, tower bolt etc shall be measured and paid separately)

S&F 30mm thick factory made flush shutters, solid core, construction, with block board core and plywood face panels, commercial type on both sides with particle board core complete all as specified and as directed.

S&F factory made solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face with particle board core, as per specification & drawing complete all as specified and as directed.

S & F flat iron clamps, hold fasts, wall ties, hooks for hanging fans and other similar small steel article confirming to Fe – 290 Grade - E 165 with and including necessary nut-bolts, washers, screws etc. as required complete all as specified and as directed.

S&F of 100 mm size butt hinges stainless steel with MS hinge pins bright finished complete all as specified and as directed.

S&F 150mm long aluminium anodised tower bolts complete all as specified and as directed.

S&F 150mm size aluminium anodised door handles complete all as specified and as directed.

S&F 300mm long aluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding of extruded section complete all as specified and as directed.

M&L for preparation of new wooden surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S & F in repair special pivot of stainless steel suitable for aluminium door made up of aluminium die cast body complete all as specified and as directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F in repair, Shower rose swivel type brass chromium plated 125 mm size including fixing to steel pipe or unions complete all as specified and as directed.

S&F in repair 10 ltr capacity PVC flushing cistern low level white colour including PVC connection 450 mm long, PVC flush pipe of reqd length etc complete all as specified and as directed.

S&F in repair, CP fancy pillar taps, fancy type cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanks and fly nuts screwed for 15 mm dia bore of pipe complete all as specified and as directed.

S&F in repair CP fancy bib tap 15 mm bore, fancy type Brass CP, fancy type with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed in repair complete all as specified and as directed.

S&F in repairs CP fancy type Stop cock/angular stop cock (ISI Marked), cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore and fixed in repair complete all as specified and as directed.

S&F in repairs of Vitreous China bowl urinal flat back, size of 465x355x265 mm White ( minimum) including providing and fixing plugs, bedding the urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement and providing grating and union for discharge pipe including 32mm bore PVC discharge pipe complete all as specified and as directed.

S&F in repairs vitreous china wash basin (WHB) , white , flat back , size 550 mm x 400 mm (1st quality) including brackets, waste fittings , brass Chromium plated for glazed basins etc. with long screw shanks and fly nuts , flange end embedded in red lead cement , including cutting for and pinning in ends of brackets or erecting stand but including providing brackets, waste pipe & CP waste coupling, PVC connection 450 mm long complete all as specified and as directed.

S&F in repairs PVC connection 15 mm bore with PTMT nuts of length 450 mm long complete all as specified and as directed.

S&F in repairs Grating 100/75 mm dia with waste hole of PTMT (minimum weight - 40 gms) complete all as specified and as directed.

S&F of 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with necessary clamps including taking down old unserviceable pipe including fittings complete all as specified and as directed .

S&F in repair 110mm dia PVC (SWR) bend complete all as specified and as directed.

S&F PVC SWR pipes 75mm dia single socketed in any length with rubber ring joints, fixed to wall. Incl taking down of existing unserviceable PVC pipe complete all as specified and as directed.

S&F in repair, 75mm dia PVC (SWR) bend complete all as specified and as directed.

Supply and fixed in repairs white vitreous china wash down water closet pan (pedestal pattern) EWC, with ‘P’ or `S' trap, including fixing bolts, Plastic water closet seat and cover, closed pattern with flat bottom, and mild steel chromium plated or aluminised hinging device, including making all necessary connections complete all as specified and as directed.

Supply and fixed in repairs vitreous China white Squatting pan, 'Orissa' pattern size 580 mm x 440 mm with integral footrests water closet) with 'P' or 'S' trap front or back inlet complete including cement concrete for bedding, connection to drain pipe and to flushing pipe , anti syphonage pipe etc complete all as specified and as directed.

S&F in repairs fancy type chromium plated with long shank and cup (concealed type) stop valve cost copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe 15mm bore complete all as specified and as directed.

Taking up or down 15mm bore pipe and connection including cleaning for refixing or removal from site complete all as specified and as directed.

Taking up or down or 20mm steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed.

Refixing of old steel tubing and connections in new or old position (wall, ceiling, floors, etc) of 15 mm bore complete all as specified and as directed.

Refixing of old steel tubing and connections in new or old position (wall, ceiling, floors, etc) of 20 mm bore complete all as specified and as directed.

Supplying , laying, jointing and testing 15 mm nominal bore Steel water tubes, 'medium grade', galvanised, with all fittings; fixed to walls and ceilings or laid in floors complete all as specified.

Supplying , laying, jointing and testing 20 mm nominal bore Steel water tubes, 'medium grade', galvanised, with all fittings; fixed to walls and ceilings or laid in floors complete all as specified.

Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.

M&L brickwork with fly ash bricks straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 by using old size bricks complete all as specified and directed.

M&L brick work with fly ash' bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and directed.

Taking down cement plaster on wall of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for Rendering 15mm thick in CM (1:6) on concrete/brick wall surfaces finished even and smooth without using extra cement complete all as specified and directed. .

M&L for 5mm thick plaster rendering on fair faces of concrete surfaces as in ceiling in CM(1:3) finished even and fair (without using extra cement) complete all as specified and as directed.

M&L for 15mm thick plaster of cement mortar (1:4) rendering on fair faces of brick work in two layers (10mm and 5mm thick) mixed with water proofing compound in top layer @3% by the weight of cement or as per manufacturer's instructions finishing the surface even and fair complete all as specified and as directed. Note : Integral water proofing compound shall be measured and paid separately.

Supply only Liquid water proofing compound conforming complete all as specified and as directed

M&L for applying two coats of exterior emulsion paint (weather coat) over a coat of exterior primer damp coat on a new plastered surfaces of facia, roof projection, chajja etc including necessary preparation of surfaces complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of walls and applying two coats of oil bound distemper over a coat of primer over putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of ceiling and applying two coats of oil bound distemper over a coat of primer over putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and as directed.

Resucuring or easing & adjusting, taking down aluminium door shutter not exc. 2sqm each and refixing in the same opening after certain repairs to shutter floor top self closing device, top pivot including handles etc, complete all as specified and as directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

S&F in repair 4mm thick Sheet glass, ordinary quality, fixed with existing snap beading, rubber gasket etc. area of each pane exc. 0.50 sqm complete all as specified and as directed.

S&F in repair 5.5mm thick Sheet glass, ordinary quality, fixed with existing snap beading, rubber gasket etc. area of each pane exc. 0.50 sqm complete all as specified and as directed.

S&F in repair door closer hydraulically regulated, designation No-3 universal type, aluminium (extruded section body), suitable for door shutter of 851 to 1000mm in width and weight between 61 to 80 Kg and fixed complete all as specified and as directed.

S&F in repair health faucet with one meter tube and hook complete all as specified and as directed.

S&F in repair CP Jet spray with 1.0 mtr tube complete all as specified and as directed.

S&F Plastic seat cover white with recessed bottom with PVC hinging device complete all as specified and as directed. as fixed in repair.

S&F in repair Toilet paper holder continental type complete all as specified and as directed.

Supply and fixing in repairs 0.63 mm thick plain galvanised, mild steel sheeting as in crumple joints, ridges, hips, valley gutter, drip and straingh flashing with suitable size al screws and gutties (length and girth as fixed) with grade of zinc coating 275 grms / sqm complete all as directed.alls (at crumple joints) with suitable size screws complete all as specified and as directed.

S&F in repair 40mm bore high density polyethylene pipes (HDPE) of pressure rating 6kgf/Sqcm fixed complete to floors, wall, ceilings etc. complete all as specified and as directed.

M&L for nahani trap/floor trap for 100mm dia outlet pipe, including making good disturbed area/ surfaces with cement concrete/cement mortar 1:3 etc including taking down old unserviceable nahani/floor trap complete all as specified and as directed .

M&L for preparation of old decorated surfaces of wall by brooming down or steel wire brushing scrapping down to remove smooke soot moulds moss and efflorescene salts and treating oil and greasy spots etc and applying a coat of colour wash complete all as specified and as directed.

M&L for preparing old decorated plastered or unplastered surfaces of walls including cornices, pilasters and other wall features etc by brooming down or steel wire brushing scrapping down to remove smooke soot moulds moss and efflorescene salts and treating oil and greasy spots etc and applying one coat of white washing on the same all as complete all as specified and as directed.

M&L for preparing old decorated plastered or unplastered surfaces of ceiling including cornices, pilasters and other wall features etc by brooming down or steel wire brushing scrapping down to remove smooke soot moulds moss and efflorescene salts and treating oil and greasy spots etc and applying one coat of white washing on the same all as complete all as specified and as directed.

M&L for preparing oil bound distemper surfaces of walls including cornices, pilasters and other wall features etyc by washing rubbing down and stopping and applying one coat of oil bound distemper on the same complete all as specified and as directed.

M&L for preparing oil bound distemper surfaces of walls including cornices, pilasters and other wall features etyc by washing rubbing down and stopping and applying and finishing the walls with textured exterior paint of required shed two or more coats applied @3.28 ltr/10 sqm over and including priming coat of exteror primer applied @2.2kg/10 sqmcomplete all as specified and as directed.

M&L for preparing oil bound distemper surfaces of ceiling including cornices, pilasters and other wall features etyc by washing rubbing down and stopping and applying and finishing the walls with textured exterior paint of required shed two or more coats applied @3.28 ltr/10 sqm over and including priming coat of exterior primer applied @2.2kg/10 sqm complete all as specified and as directed.

M&L for preparation of old surfaces of wall/chajja/facia and applying a coat of external acrylic emulsion (weather coat all guard) paint complete all as specified and as directed.

M&L for preparation of old painting to wooden and wooden based surfaces of any description not otherwise described, over 10 Cm width or girth and applying one coat of synthetic enamel paint on the same complete all as specified and as directed.

M&L for preparation of old painting to steel surfaces of any description not otherwise described, over 10 Cm width or girth and applying one coat of synthetic enamel paint on the same complete all as specified and as directed.

M & L for 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cupbord door/shelves/wall paneling including 6 mm thick wooden leaping and dismantling of old boarding complete all as specified and directed.

Taking down existing tarfelt including tiles, lime concrete & screed bed complete from roof surfaces including parapets and lowering and removing the same to a distance exc. 50m and n. exc. 100m including roughening of old concrete surface of roof by wire brushing and cleaning the surface to remove all loose dust etc complete all as specified and as directed.

M&L for 15mm thick screed bed or bedding layers in cement mortar (1:4) in order to maintain proper slope over existing roof surfaces for laying acrylic polymer modified, fibre reinforced waterproof coating Roof Guard, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for providing and applying single component acrylic polymer modified, fibre reinforced waterproof coating in 4 coats of application:- (a) Applying primer coat with Primer @ 0.3 kg /sqm or as per manufacturer's instructions. (b) over priming coat applying waterproofing coat as per manufacturer instructions with fibre reinforcement @ 0.75kg/sqm on the flat or vertical surfaces over parapet wall and ensure that there are no bubbles of creases. Overlapping of the fibre is a minimum of 50mm and allow this coat to dry for a period of 2-6 hrs depending on the atmospheric condition. (c) Applying second coat of waterproofing coat @0.75Kg/sqm or as per manufacturer's instructions. (d) Applying final coat of primer @ 0.08kg/sqm after 2nd coat has dried properly. (Note : Water Proofing treatment shall be carried out by authorised applicator approved by the manufacturer.)

S&F in repair of 4mm thick 'E' classic designer board false ceiling with powder coated GI snap grid frame work of grid size 600 x 600 mm complete all as specified and directed including all necessary drilling and necessary arrangement to fix items as under :- (a) 27x27x0.55 mm thick GI angle powder coated duly plugged @ 600mm centre to centre along with perimeter of wall. (b) 25x25x0.55 mm thick GI tee powder coated as main and cross runners suspended with 1.6mm dia GI wire suspenders (n.exe 1.2 mtr length) with adjustable clamps and dash true fastners plugging in RCC slab/wooden truss/A.I Runner of slopped roof placed @ 600mm centre to centre from perimeter of wall. (c) Fixing of 4mm thick AC "E" Classic designer board of approved texture and finished complete.

Supply & fixed in repair, integral Vitreous china wash down water closet pan white including fixing bolts, flushing cistern and flush pipe plastic water closet seat, closed pattern with flat bottom and cover and mild steel CP or aluminised hinging device complete all as specified and as directed.

S&F in repair Sensotronic sensor flushing valve for urinal with complete kit suitable for urinal complete all as specified and as directed.

INTERNAL ELECTRIFICATION Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten/ conduit/ gutties/ wooden boards/ switches/ sockets/ regulators/ light fittings etc and separating the serviceable items like fan regulators and light fittings for re-use under respective items and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified and as directed.

M&L for concealed conduit point wiring with 1.5 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core copper cable working voltage 1100 volts grade conforming to IS-694 with stranded copper conductor in and including PVC conduit of adequate size with all accessories (including cutting chases & making good the disturbed surface to its original specification) including MS sunk box, 3mm thick hylum sheet top cover fixed by means of brass machine screw and cap washer including size 1.5 sq mm (nominal cross sectional area) PVC insulated unsheathed single core multistranded copper conductor cable as earth continuity conductor connected to main switches/DB's or common earth dolly for one light point controlled by one way switch complete all as specified and as directed.

Description all as per item No 118 above here in before but for one Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator complete all as specified and as directed.

Description all as per item No 118 above here in before but for one 3 point 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and as directed..

Description all as per item No 118 above here in before but for one 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board complete all as specified and as directed.

Description all as per item No 118 above here in before but for one bell point controlled by one, bell switch 5 Amps complete all as specified and as directed.

Description all as per item No 118 above here in before but for light point controlled by two ways, 5 Amps complete all as specified and as directed.

Description all as per item No 118 here in before but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point including running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and as directed.

S&F switch piano single pole flush type 5 amps, 230 volts complete all as specified and as directed.

S&F switch piano single pole flush type 5 amps, 230 volts. two way complete all as specified and as directed.

S&F socket 2 in 1, 5/6 amps, white evory finish flash type complete all as specified and as directed.

S&F switch socket combination 2 and 3 pin 5/6 amps multipurpose flush non shutter, non inter locking type white ivory finish with complete all as specified and as directed.

S&F socket outlet 2 in 1 5 pin 5/15 amps multipurpose 230 volt flush type type complete all as specified and as directed.

S&F in repair ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified and as directed.

Supply & fixing in repair modular switch, single pole, 1 way 6/10A, 1 module, 230 Volts including necessary connection complete all as specified and as directed.

Supply & fixing in repair modular switch, single pole, 2 way 6/10A, 1 module, 230 Volts including necessary connection complete all as specified and as directed.

Supply & fixing in repair modular switch, single pole, 1 way 16/20A, 1 module, 230 Volts including necessary connection complete all as specified and as directed.

Supply & fixing modular shuttered socket outlet, 5 pin, 6A-2/3 pin combined 2 module, 230 Volts AC including necessary connection complete all as specified and as directed.

Supply & fix modular shuttered socket, 6A/16A-2/3 pin combined 2 module, 230 Volts AC including necessary connection complete all as specified and as directed.

Supply & fixing modular fan electronic regulator, 120 watts, 230 volts AC, 50 Hz, 2 module, 230 Volts, including necessary connection complete all as specified and as directed.

S&F in repair lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings fixed with PVC round/square blocks complete all as specified and as directed.

S&F LED Lamp 9/10 Watt with B 22 base complete all as specified and as directed..

S&F Call bel Ding Dong 230 Volt single phase complete all as specified and as directed.

S & F in deluxe fan Electronic regulator 120/280 volts AC 50 Hzs rotary step white/ivory finish complete all as specified and as directed

S&F in repair hylam sheet 3 mm thick white in colour of size 130 mm x 180 mm including taking down existing unserviceable complete all as specified and as directed.

S&F in repair hylam sheet 3 mm thick white in colour of size 120 mm x 170 mm including taking down existing unserviceable complete all as specified and as directed.

S&F in repair hylam sheet 3 mm thick white in colour of size 230 mm x 280 mm including taking down existing unserviceable complete all as specified and as directed.

S&F in repair hylam sheet 3 mm thick white in colour round type of size 80 mm dia including taking down existing unserviceable complete all as specified and as directed.

S&F IP 20, class I, LED light 1X18 W (or nearest next higher wattage) (4feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified and as directed.

M&L for Energy saving new generation environmental friendly long life versatile pressure die cast aluminium IP 66 Security light fitting luminaire with high power LEDs as light source and driver of capacity 25 watts withpre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor cabe from ceiling rose to fitting and GI Pipe bracket made out of GI pipe medium grade 1.2 Mtr long 32 mm dia , MS clamp, nut, bolt and washers complete all as specified and as directed.

S&F IP 20, Class I, LED Mirror light fitting 1 x 10 W, (or nearest next higher wattage) 5700 K, wall /Surface mounted with aluminium housing 2 feet long, integrated type, with high efficiency PMMA diffuser, integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaries efficacy > 95 lumens/Watt, power factor >/ 0.90, operating range – 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/square blocks, screws etc complete including 01 No 10 W LED lamp with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size including necessary taking down the old unserviceable fitting complete all as specified and as directed.

S & F Recess round shape LED ceiling light 12 Watt fitting (6'' outer dia) for armstrong/ grid ceiling, white powder coated CRCA housing complete with full window acrylic diffuser & electronic driver, high brightness SMD LEDs etc complete with all accessories internally prewired and necessary mounting arrangements, including necessary connection including taking down the old unserviceable fitting complete all as specified and as directed.

S & F Post top lanterns 15 watt LED light fitting ,new generation, energy saving, environmental friendly, long life with symmetrical light distribution, spun aluminium landscape luminaries with high power LEDs as light source, spun aluminium canopy, with opal/clear acrylic diffuser and complete with all accessories internally prewired including connecting up with three core twisted flexible copper conductor cable up to ceiling rose and necessary mounting arrangements including taking down the old unserviceable fitting complete all as specified and as directed.

S & F Recess mounting flat panel 34 Watt fitting (2'*2) for armstrong/ grid ceiling, white powder coated CRCA housing complete with full window acrylic diffuser & electronic driver, high brightness SMD LEDs etc complete with all accessories internally prewired and necessary mounting arrangements, including necessary connection including taking down the old unserviceable fitting complete all as specified and as directed.

Supply and fixing Decorative wall light fixture made up of polycarbonate suitable for 15 watts LED retrofit of type B-22 base , IP 66 grade, with and including 15 watts LED lamp and connecting up with and including PVC insulated 3 core of size 0.75 sqmm copper conductor from ceiling to terminal block of light fitting all as specified and directed .

M&L for sub main wiring with 2 run of 6.00 sqmm (nominal cross-sectional area) PVC insulated unsheathed single core FRLS cable of working voltage 1100 volts grade with stranded copper conductor including one run of 6.00 Sqmm (nominal cross sectional area) PVC insulated unsheathed cable with stranded copper conductor as continuous earth wire connected to common earth dolly drawn in 25mm dia PVC rigid non- metallic conduit with complete all as specified and as directed. (Note: (i) Two runs of submain wiring cable along with one run of earth wire with and including PVC conduit pipe shall be measured as one unit length).

M & L for sheet metal enclosure fabricated out of 2.0 mm thick CRCA sheet, totally enclosed type, dust & vermin proof, with suitable sized supporting MS angles & suitable openings at top & bottom for entry of outgoing / incoming cables, fixed with nuts & bolts & front side openable with hinged shutter with suitable locking arrangement duly painted with 2 coats of powder coated paint over a coat of red oxide primer (spray paint) with minimum dimensions (90 x 75 x 20 cm ) flush to wall for incorporating 01 No TPN DB, 04 Nos electronic meters etc complete all as specified and as directed.

Supply and fixing of moulded case circuit breaker (MCCB) four pole Adjustable type 415 volt, 50 Cycles, 160 Amps of breaking capacity 36 KA after and including taking down / dismantling of old existing unserviceable one complete all as specified and as directed.

Supply & fix sheet metal enclosure for 4 way Distribution Boards (DB’s), double door , Triple pole and neutral with 200 amps rated bus bar, including bus bar neutral link, earth bar and din rail, IP-43, IK-09 protection including gasket and door earthing suitable for fixing MCBs/isolators fixed on wall surface and making good the disturbed surfaces of wall and connecting up complete all as specified and as directed.

Supply & fix sheet metal enclosure for 8 way Distribution Boards (DB’s), double door , single pole and neutral with 200 amps rated bus bar, including bus bar neutral link, earth bar and din rail, IP-43, IK-09 protection including gasket and door earthing suitable for fixing MCBs/isolators fixed on wall surface and making good the disturbed surfaces of wall and connecting up complete all as specified and as directed.

Supply and fixed MCB TPN 40 to 63 Amps, 'C' series 10kA, 415 Volts and to be housed in DBs complete including necessary connection all as specified and as directed.

Supply and fixed MCB SPN, 32 to 63 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs including necessary connection complete all as specified and as directed.

Supply and fixed MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs including necessary connection complete all as specified and as directed.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB, 20 Amps, 240 Volts, including necessary connection including taking down old one complete all as specified and as directed.

L. B. SHARMA

SHRI PRADEEP PARIK

M/s. MD IRSHAD

NARAYAN MAJUMDER

R K AGARWAL