REPAIR MAINT OF PLUMBING WORK SANITARY FITTINGS CEILING ROOFING TILING LEAKAGE SEEPAGE JOINERY AND PERIODICAL SERVICES TO CERTAIN BUILDINGS IN POCKET NO 2 IN THE AREA OF AGE BR I UNDER GE ROORKEE

Amount

Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed .

M&L for brick work in cement mortar (1:6) using old size sub class ‘B’ bricks, straight or curved on plan exc 6 m mean radius complete all as specified and directed.

M&L for brick work in cement mortar (1:4) in half brick walls using old size sub class ‘B’ bricks, straight or curved on plan any radius complete all as specified and directed .

Demolition of cement concrete (un-reinforced) of any description in ground floors and pavings n.exc 15cm thick (above or below GL) complete all as specified and directed.

M&L for 75 mm thick PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in floor, hard standing, plinth protection etc, finished even and smooth without using extra cement, laid in alternate bays n.exc 2.50 Sqm complete all as specified and directed.

M&L PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in surface channels and drain etc complete all as specified and directed.

Extra for forming fair finished drain or channel 30 CM inner girth in cement concrete using extra cement including forms, moulds, mitred/ stopped ends etc complete all as specified and as directed.

Demolition of RCC of any description and in any position (reiforcement cut as required to facilitate demolition) including precast concrete articles set in cement mortar of nay description complete all as specified and directed.

M&L for precast cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in landings, cover slabs for manholes, kitchen platform etc and similar articles with plain fair faces including chamfers, weathering, throating, formwork etc and setting in cement mortar (1:6) complete all as specified and directed.

M&L for 60 mm thick Machine pressed precast cement concrete of M-35 grade interlocking paver block of any shape and size conforming to IS 15658-2006 with grey cement and pigment complete all as specified and directed

Supply and laying fine sand including spreading and levelling in 25mm thick layer for cushioning to interlocking paver block complete all as specified and directed.

M&L for providing cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in cills, coping, sides/edges of interlocking paver blocks path and the like complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending, hooking ends and binding with & including MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for 14 to 16mm thick granite stone slab (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and the like, laid over & including 15mm thick screed bed in cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade shade complete all as specified and directed.

S&F in repairs, 75mm dia PVC (SWR) pipes, single socketed (ISI Marked) in any length with rubber ring joints, fixed to wall including necessary MS clamps etc complete all as specified and directed.

S&F in repairs, 75 mm dia PVC (SWR) bends / elbow (ISI Marked) complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls etc including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces of walls, finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces of walls, finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying 1.5mm thick wall care putty of approved make on wall surfaces and a coat of wall primer and two coats of oil bound distemper (White or tinted) complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Non-skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular), area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm, laid over & including 15mm thick screed bed or bedding layer in cement mortar (1:6) in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and directed.

M&L for Non-skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular), area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm in floors etc, laid over & including 15mm thick screed bed or bedding layer in cement mortar (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and directed.

M&L for Glazed ceramic coloured tiles 450X 350X 7 mm/ 450x 300 x7mm thick as required, laid over and including 10 mm thick screed bed or rendering coat in cement mortar (1:4) in vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and directed.

M&L for Glazed ceramic coloured tiles 300x200X 7 mm thick, laid over and including 10 mm thick screed bed or rendering coat in cement mortar (1:4) in vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and directed.

M&L for Vitrified ceramic light shade tiles 10 mm thick (square/ rectangular) polished, area of each tile exc 0.36 sqm but n.exc 0.42 Sqm,laid over & including 15mm thick screed bed or bedding layer in cement mortar (1:6) in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and directed.

M&L for Vitrified ceramic light shade, tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 Sqm, laid over and including necessary adhesive (Tilofix) in vertical surfaces such as skirting, dados, etc and pointed in white or coloured cement to match the shade complete all as specified and as directed.

M&L for 75mm thick cement concrete (1:4:8) type B- 2 (using 40mm graded stone aggregate) as in sub baseand the like complete all as specified and as directed.

M&L for cement concrete tiles 25cm x 25cm x 20mm thick, machine pressed with gray cement and pigment, laid over and including 20mm thick screed bed in cement mortar (1:6) in floors, set, jointed and pointed in neat cement slurry, cut and polished complete all as specified and directed.

S&F in repairs, 15 mm bore PTMT bib tap (any colour) complete all as specified and directed.

S&F in repairs, 15mm bore brass chromium plated bib tap (short body), fancy type with crutch or butterfly handle, screwed down high pressure complete all as specified and directed. (Model : PIS-06, Make : Prayag or equivalent range of Marc, Jaquar, Johnson).

S&F in repairs, 15mm bore chromium plated brass angle/stop valve, screwed down high pressure complete all as specified and directed. (Model : 8910 Make : Prayag or equivalent range of Marc, Jaquar, Johnson).

S&F in repairs, 125 mm size CP brass shower rose (single lever over head shower including shower arm casted 190 mm long flat shape with flange) suitable for 15 mm bore pipe complete all as specified and directed (Model : BOS-90S Make : Prayag or equivalent range of Marc, Jaquar, Johnson).

S&F in repairs, 15mm bore PVC connection 450 mm long with 2 Nos brass check nuts with washer complete all as specified and directed.

S&F in repairs, 15mm bore PVC connection 600 mm long with 2 Nos brass check nuts with washer complete all as specified and directed.

S&F in repairs, 10 ltrs PVC (White) valve less syphonic action type, low level flushing cistern with inlet, ball valve, float, handle, Aluminium brackets for bottom support fixing with gitties embedded in wall with drilling machine etc complete all as specified and directed.

S&F in repairs, vitreous china squatting pan (Orissa pattern) long pan of size 580x440mm, white with integral footrest & 'P' or 'S' trap including connection to trap, flushing pipe , anti-syphonage pipe etc (excluding flushing cistern and flush) and making good to disturbed surfaces to match the existing complete all as specified and directed.

S&F in repairs, plastic water closet (EWC) seat cover, white, closed pattern with flat bottom and cover including mild steel chromium plated hinging device complete all as specified and directed.

S&F in repairs, vitreous china wash down water closet pan (Pedestal pattern) white including 'P' or 'S' trap and making good the disturbed surfaces to match with the existing complete all as specified and as directed.

S&F in repairs, vitreous china wash hand basin, white, flat back of size 550 x 400 mm (excluding pillar tap) including waste coupling, waste pipe and a pair of MS bracket etc complete all as specified and directed.

S&F in repairs, vitreous china wash hand basin with pedestal of approved colour, flat back of size 550 x 400 mm (excluding pillar tap) including waste coupling and waste pipe complete all as specified and as directed.

S&F in repairs, 15mm bore pillar tap, cast copper alloy with capstan heads, chromium plated, fancy type, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shank and fly-nut, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair, vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe & waste pipe) including fixing plugs, bedding urinal against wall in cement mortar (1:2), securing to plugs with and including 60mm long brass screws, PTMT urinal spreader of any colour fixed to 15mm dia pipe, pointing around urinal back in cement complete all as specified and directed.

S&F in repairs, 15 mm dia GI tubing, medium grade with all fittings and fixed to walls, ceiling or laid in floor etc including taking down of existing tubing of any description complete all as specified and directed.

S&F in repairs, 20 mm dia GI tubing, medium grade with all fittings and fixed to walls, ceiling or laid in floor etc including taking down of existing tubing of any description complete all as specified and directed.

Cleaning of 250 to 300 ltrs capacity OH service tanks of any description including cleaning the mouths of GI inlet & outlet pipes etc complete all as specified and directed.

Cleaning of 500 ltrs capacity OH service tanks of any description including cleaning the mouths of GI inlet & outlet pipes etc complete all as specified and directed.

Cleaning of 1000 ltrs capacity OH service tanks of any description including cleaning the mouths of GI inlet & outlet pipes etc complete all as specified and directed.

Dismantling of water storage tank of any description 1000 ltrs capacity and removal from site complete all as specified and directed.

Dismantling of water storage tank of any description exc 250 and n.exc 500 ltrs capacity and removal from site complete all as specified and directed.

S&F 1000 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including connecting inlet/outlet pipes etc complete all as specified and directed.

Refixing water storage tanks of any description of capacity n.exc 500 ltrs, hoisted and fixed in position complete all as specified and directed.

S&F 500 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including connecting inlet/outlet pipes etc complete all as specified and directed.

S&F in repairs, 20 mm bore Gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair 20mm dia PTMT ball valves (minimum weight 210 gms) with epoxy coated aluminium rod & high density plastic ball, high pressure, screwed for iron pipe complete all as specified and directed.

S&F in repairs, 20 mm dia brass chromium plated towel rail 600 mm long, fixed to wall with CP steel screws etc complete all as specified and directed.

Taking down shutters of any description exc 1.00 Sqm and n.exc 2.00 Sqm each complete all as specified and directed .

Taking down chowkhat or frames with shutters (without taking off shutter from the frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed .

Taking down chowkhat or frames with shutters (without taking off shutter from the frame) n.exc 1.5 Sqm each complete all as specified and directed .

S&F 2nd class hard wood plain solid, straight chowkhat and frame, rebated on the solid, rounded or chamfered on edges, put together with glue pinned at point complete all as specified and directed .

Dismantling timber scantlings 40 Sqcm and over in section, fixed in unframed work in any position complete all as specified and directed .

M&L for 2nd class hard wood timber, clean sawn, fixed in scantling in any position complete all as specified and as directed.

S&F 30 mm thick flush shutters, solid core construction with block board core and plywood face panels, water proof/ weather proof type on both sides and fitted to chowkhat complete all as specified and directed.

S&F 35 mm thick 2nd class HW Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhat complete all as specified and directed .

S&F 35 mm thick 2nd class hard wood glazed & skeleton shutter, divided into squares with plain chamfered or rounded sash bars, open rebated and prepared to receive glass/gauge etc fitted with cut and mitred beads, size of members of shutters with stiles and rails as specified in Section 8 clause 8.24 (b) of SSR Part I and fitted to chowkhat complete all as specified and directed .

S&F 250 mm MS sliding door bolts, plate type, stove enameled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F 100 mm size butt hinges, medium weight cold rolled, mild steel and fixed complete all as specified and directed.

S&F 150mm size mild steel barrel tower bolts, stove enameled black with bright bolt and fixed complete all as specified and directed.

S&F 150mm size mild steel pressed handles oval type, stove enameled black and fixed complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

All as per Sl item No. 73.00 above but wire gauzed i.e. panel will be of wire gauze in lieu of plain PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes (top & bottom rails, MS frame shall be covered with heat moulded wood grain printed PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail). The wire gauge shall be stretched to tighten firmly complete all as specified and directed.

S&F solid PVC door frame of size, 50x47mm, made out of 5mm thick plain colour PVC sheet, reinforced with MS square tube fixed with screw/plugs to brick walls complete all as specified and directed.

All as per Sl item No. 75.00 but wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed.

S&F 100mm size PTMT butt hinges and fixed complete all as specified and directed. Make : PRAYAG / POLYTUF

S&F 200 mm size PTMT tower bolt and fixed complete all as specified and directed. Make : PRAYAG / POLYTUF

S&F 125mm size PTMT door handles and fixed complete all as specified and directed. Make : PRAYAG / POLYTUF

S&F 300mm size mild steel ordinary helical door spring including roller and rolling plate complete all as specified and directed.

S&F steel windows with side hung shutters with glazing bars dovetailed or welded including box type hinges, steel handles and steel peg stay complete complete all as specified and directed.

S&F Steel windows with side hung shutters without glazing bars iincluding box type hinges, steel handles and steel peg stay complete complete all as specified and directed.

S&F mild steel framed work such as grills, gratings, hold fast etc with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron door, ladders, framed balusters, walk ways, railings, frame work of water tank and similar work conforming to Fe 290 Gde E165 complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden / metal frames, glazed with oil putty or fixed with beads including punching or drilling out old glazing pins / spring clips and providing new glazing pins / spring clips complete all as specified and directed.

S&F 3 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed with wooden beads in square n.exc 0.5 Sqm in each pane complete all as specified and directed.

S&F 3 mm thick figured glass, pin head type and glazing with oil putty or fixed with wooden beads in square n.exc 0.5 Sqm in each pane complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tack/galvanised wire staples complete all as specified and directed.

S&F in repairs, galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tack/galvanised wire staples complete all as specified and directed.

M&L for preparing new surface of wood and wood based surfaces of any description exc 10 cm width or girth by knotting, stopping etc and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparing new steel and iron surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

M&L for preparing old painted surface of wood and wood based surfaces of any description exc 10 cm width or girth by knotting, stopping etc and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparing old painted steel and iron surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F in repairs, 75mm dia cast iron nahani trap with grating including jointing to waste pipe in cement joints and fixed in cement concrete (1:2:4) type B-1 complete all as specified and directed.

S&F in repairs, stainless steel peg set of six complete all as specified and directed.

Easing & adjusting of wooden window shutters /CB shutters (One unit shall comprise of one window/CB/ Showcase irrespective of number of leaves) for properly closing/opening, fixing of stays, cleat etc, tightening of hinges or changing the position of hinges, adjustment of tower bolts, hasp & staples etc complete all as specified and directed.

Easing & adjusting of wooden door shutters (One unit shall comprise of one door shutter irrespective of number of leaves) for properly closing/opening, fixing of stays, cleat, door stopper etc, tightening of hinges or changing the position of hinges, adjustment of tower bolts, sliding bolt etc complete all as specified and directed.

Easing & adjusting of steel window shutters (One unit shall comprise of one window irrespective of number of leaves) for properly closing/opening, welding of hinges or handles (including of S&F handles/ hinges if required) or changing the position of hinges complete all as specified and directed.

S&F in repairs, 20 mm dia mild steel curtain rod covered with PVC sleeves, fancy type of best quality available in local market with and including mild steel matching to colour fancy type brackets, stops of suitable size and necessary curtain rings, side caps etc complete all as specified and directed.

S&F in repairs, 125 mm dia mild steel chromium plated grating (round), with hole or without hole, fixed in cement mortar (1:3) over floor/nahani trap complete all as specified and directed.

S&F in repair, 1.00mm thick stainless steel sink with drainage board, for kitchen or laboratory, with plug, waste fittings, waste pipe, washers including cast iron cantilever brackets, connecting union etc, overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs, stainless steel plate rack of size 31” X 30” X 10” made of 0.63 mm thick stainless steel plate and fixed to wall with rawl plugs & screws complete all as specified and directed.

S&F in repairs, 15 mm bore brass concealed type stop cock, chromium plated, fancy type, high pressure, screwed both ends for iron pipe or brass ferrule complete all as specified and directed. (Model : 8326 Make : Prayag oe equaivalent of Jaquar, Marc, Johnson).

S&F in repairs, health faucet of 8 mm dia with 1.20 mtr long flexible tube & wall hook complete all as specified and directed.

S&F in repairs, CP toilet paper holder and fixed complete all as specified and directed.

Taking down asbestos cement (corrugated, semi-corrugated etc) sheets in roof covering incuding ridge of any description complete all as specified and directed.

S&F 6mm thick cement fibre (Non Asbestos) corrugated or semi-corrugated sheets, fixed with L-type or J-type or cranked hook bolts in roof covering or wall cladding complete all as specified and as directed.

S&F 6mm thick two piece cement fibre (Non Asbestos) serrated ridges for corrugated sheet with 'L' or 'J' hook or cranked hook bolts complete all as specified and as directed.

S&F in repairs, 0.63mm thick plain, galvanised, mild steel sheet in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed.

Taking down alluminium door/ window shutter with/ without frame as required and repair/replacement of butt hinges/ screws, rubber beading (if required) and refixed to frame / wall complete all as specified and as directed.

S&F aluminium powder coated glazed door shutters using aluminium section weighing 0.55 Kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles-2 Nos in each door, hinges, anodised aluminum snap beading, screws and rubber lining at sides for air locking as per manufacturer's instructions complete all as specified and as directed.

S&F aluminium anodised window and ventilator shutters, fixed type without sash bars using aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc and rubber lining at sides for air locking, hinges, tower bolt, locking arrangement as required as per manufacturer's instructions complete all as specified and as directed.

M&L for 12mm prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination & other side balancing white lamination, fixed with screws to aluminium door /timber frame work complete all as specified and as directed.

S&F 5.5mm thick tinted sheet glass, fixed to aluminum door/ window shutters with rubber beading complete all as specified and directed.

S&F aluminium grill of approved size and pattern, fixed to aluminium windows with screws complete all as specified and as directed.

S&F in repairs, double action floor spring hydraulically regulated made of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in floor complete all as specifies and as directed.

S&F in repairs, hydraulic door closer of extruded aluminium body, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

Taking down wall/ceiling boards (asbestos/plywood) of any thickness and description including cover fillets complete all as specified and directed.

M/L for designer ceiling board 4mm thick fixed with and including GI framed work of size 4mm main 'T' 24x38.5mm and cross T of size 24X28.5mm thick made out of PGI sheet 0.30mm thick doubled at web and single at flange, flange covered with powder coated sheet 0.25mm thick and angle 24xx24x0.4mm covered with powder coated sheet 0.25mm thick for ceiling, ceiling boards 60cmX60CmX4mm thick, suspended with GI wire 2mm dia and up to 2 mtr long complete incl plugging in brick walls with steel rawl plugs @ 600mm C/C complete all as specified and directed.

M&L for preparing old decorated surfaces of walls including cornices, pillasters etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified and directed.

M&L for preparing old decorated surfaces of ceiling including cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified and directed.

M&L for preparing old decorated surfaces of walls including cornices, pillasters etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of colour wash complete all as specified and directed.

M&L for preparing old decorated surfaces of walls including cornices, pillasters etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of cement base paint complete all as specified and directed.

M&L for complete removal of old decorative treatment of any description from wall surface and applying two coats of cement based paint over one coat of alkali resistant priming paint complete all as specified and directed.

M&L for preparing old distempered surfaces of walls by washing, rubbing down and stopping and applying one coat of oil bond distemper of any tint including necessary putty work for gap filling (if required) complete all as specified and directed.

M&L for preparing old painted surfaces of wood and wood based surfaces of any description exc 10 cm width or girth by knotting, stopping etc and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparing old painted surfaces of wood and wood based materials exc10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparing old painted steel and iron surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparing old treated wall /roof surface including scrapping with wire brushes, rubbing down with emery paper, washing etc and applying one coat of exterior emulsion paint (Apex / Weather coat) complete all as specified and directed.

M&L for preparing old plastered or unplastered surfaces of walls and applying one coat of synthetic enamel paint on number plate of bldgs, sign boards etc complete all as specified and directed.

M&L for preparing old decorated surfaces of walls including cornices, pillasters etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts including removing vegitation etc and applying one coat of plastic emamel paint complete all as specified and directed.

M&L for complete removal of existing decrative treatment of any description from wall surfaces and applying 1.5 mm thick wall care putty on new or old plastered surfaces to a smooth finish complete all as specified and directed.

M&L for writing letters or figures (in Block, Roman, Italic or Indian) n.exc 30 cm high with synthetic enamel paint to match existing work complete all as directed.

Cutting of plant/tree girth n.exc 30cm including digging out roots from floor/roofs or walls and making good the dismantlled portion in cement mortar (1:3) to match the existing surfaces complete all as specified and directed.

Panwar Construction Co.

Alankar Traders

M/S RAJESH ARORA

m/s rajesh bros.

M/S A.K GARG

RAM PRAKASH AND ASSOCIATES

Bhardwaj Construction Co

KOHLI BUILDERS

VERDHMAN ASSOCIATES