Upgradation of Samoh Geherwin Thuran road Km.0/0 to 13/0.

Amount

Excavation in hilly area in all heights and depths in all kinds of soil by manual /mechanical means including saturated soil comprising of ordinary soil , soft rocks, hard rocks, chiselling/wedging out of rock (where blasting is prohibited ) and other intermediate classification of soil, setting out true to the required line, grade width cutting and trimming of side slopes and level as shown on the drawing and as directed by the Engineer-in-Charge at site according to the M.O.R.D Technical Specification 2014 Clause 302,1603.1,1603.2, and sorting out useful material and stacking the same in all leads and lifts on acquired width of the road and transportation of useful material for filling in road ways, camber ,embankments for grade improvements and disposal of all surplus materials to the approved dumping sites, which shall be managed by the contractor / firm at their own, through all modes of transportation including head load or animals transport or mechanical means, alongwith its levelling fine dressing and carriage of machineries, materials, tools equipments and safety measures and other incidentals necessary to complete the work by mechanical means and/or labour if required. Any Loss to the public/private property during the execution shall be the absolute responsibility of the Contractor which shall have to be duly compensated by him in all cases including carriage of materials , within all leads and lifts as per direction of Engineer-in-Charge. The rate excluding of Goods Service Tax but including labour cess, other levies / taxes, duties , royalties, sale tax, octrori, Toll taxes of local bodies and authorities that the contractor will have to pay for the performance of this contract. A recovery of useful stones for 2117.89 Cubic metre @ Rs.300/- (Rupees Three Hundred) per cubic metre shall be done on pro-rata basis from each running bill for this item.

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5 including carriage of materials within all leads and lifts and other incidentals as per direction of Engineer-in-Charge. The rate excluding of Goods Service Tax but including labour cess, other levies / taxes, duties , royalties, sale tax, octrori, Toll taxes of local bodies and authorities that the contractor will have to pay for the performance of this contract..

Earth work in excavation for structure in all type of classification of soil comprising of ordinary soil, soft rocks, hard rocks, chiseling / wedging out of rock (where blasting is prohibited) as per drawing and MORD technical specification 2014 clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials , and disposal of up to all leads and lift including dressing of sides and bottom and backfilling with approved material in layers not exceeding 150mm (one hundred fifty millimeters) compacted thickness including shoring and shuttering and pumping or bailing out water (surface and sub soil water) up to all depth and any quantum of water including cleaning of slush which may arise out during dewatering and carriage of machinery, material ,tools equipment safety measures and other incidentals necessary to complete the work by mechanical means and / or labour if required. Any loss to the public /private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him including carriage of materials within all leads and lifts and other incidentals as per direction of the Engineering-In-Charge.. The rate excluding of Goods Service Tax but including labour cess, other levies / taxes, duties , royalties, sale tax, octrori, Toll taxes of local bodies and authorities that the contractor will have to pay for the performance of this contract..

Providing and Laying cement concrete 1:4:8 nominal mix ( One Cement : four Sand : eight graded crushed stone aggregrate.) 40mm ( forty milimetre) nominal size with minimum cement contents 170 kg (One hundred seventy kilogram) per cubic metre and curring complete . including cost of form work for plain /reinforce concrete in retaining walls, breast wall as per drawing and MORD tecnical specification 2014 Clause 802, 803, 1202 and 1203 including carriage of material with in all leads and lifts ,shoring and shuttering and curring complete including pumping or bailing out water (surface and sub soil water) up to all depth and any quantum of water including cleaning of slush which may arise out during dewatering and carriage of machinery, material ,tools equipment safety measures and other incidentals as per the direction of Engineer-in Charge. The rate excluding of Goods Service Tax but including labour cess, other levies / taxes, duties , royalties, sale tax, octrori, Toll taxes of local bodies and authorities that the contractor will have to pay for the performance of this contract.

Providing and Laying cement concrete grade M-10 (Ten)design mix, graded crushed stone aggregrate. 40mm ( forty milimetre) nominal size with minimum cement contents 250kg (two hundred fifty ) killogram, per cubic metre and curring complete . including cost of form work for plain /reinforced concrete in structures like culverts, drains, solid causeway and other structre as per drawing and MORD tecnical specification 2014 Clause 802, 803, 1202 and 1203 including carriage of material with in all leads and lifts ,shoring and shuttering and curring complete including pumping or bailing out water (surface and sub soil water) up to all depth and any quantum of water including cleaning of slush which may arise out during dewatering and carriage of machinery, material ,tools equipment safety measures and other incidentals as per the direction of Engineer-in Charge. The rate excluding of Goods Service Tax but including labour cess, other levies / taxes, duties , royalties, sale tax, octrori, Toll taxes of local bodies and authorities that the contractor will have to pay for the performance of this contract..

Plain cement concrete grade M-20(Twenty)design mix, with minimum cement content should be 350 kg (three hundred fifty) killogram, per cubic metre and curring complete . including cost of form work for plain /reinforced concrete in sub-structre as per drawing and MORD tecnical specification 2014 Clause 802, 803,804,805,806, 1202 and 1203 including carriage of material with in all leads and lifts ,shoring and shuttering and curring complete including pumping or bailing out water (surface and sub soil water) up to all depth and any quantum of water including cleaning of slush which may arise out during dewatering and carriage of machinery, material ,tools equipment safety measures and other incidentals as per the direction of Engineer-in Charge. The rate excluding of Goods Service Tax but including labour cess, other levies / taxes, duties , royalties, sale tax, octrori, Toll taxes of local bodies and authorities that the contractor will have to pay for the performance of this contract..

Plain cement concrete grade M-25(Twenty five) with minimum cement content should be 405 kg (Four hundred five) killogram, per cubic metre and curring complete . including cost of form work for plain /reinforce concrete in super structures and other structure as per drawing and MORD tecnical specification 2014 Clause 800,1205.4 and 1205.5 including carriage of material with in all leads and lifts ,shoring and shuttering and curring complete including pumping or bailing out water (surface and sub soil water) up to all depth and any quantum of water including cleaning of slush which may arise out during dewatering and carriage of machinery, material ,tools equipment safety measures and other incidentals as per the direction of Engineer-in Charge. The rate excluding of Goods Service Tax but including labour cess, other levies / taxes, duties , royalties, sale tax, octrori, Toll taxes of local bodies and authorities that the contractor will have to pay for the performance of this contract..

Supplying, fitting and placing HYSD bar of TATA / SAIL reinforcement (Fe 500 D) in super-structure complete including cost of binding wire as per drawing and MORD tecnical specification 2014 clause 1002, 1010 & 1202. including carriage of materials , within all leads and lifts and other incidentals as per direction of Engineer-in-Charge. The rate excluding of Goods Service Tax but including labour cess, other levies / taxes, duties , royalties, sale tax, octrori, Toll taxes of local bodies and authorities that the contractor will have to pay for the performance of this contract..

Providng and laying reinforced cement concrete hume pipe NP2 (two) for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 (One Cement: two Sand) but excluding cost of excavation, protection work, back filling ,concrete and masonary work in head walls and parapet as per MORD Technical Specification 2014 Clause 1101. 900mm dia ( Nine hundred millimetre) dia including entire carriage of materials , within all leads and lifts and other incidentals as per direction of Engineer-in-charge. The rate excluding of Goods Service Tax but including labour cess, other levies / taxes, duties , royalties, sale tax, octrori, Toll taxes of local bodies and authorities that the contractor will have to pay for the performance of this contract..

Back filling behind abutment wing wall retaining wall return wall and like structure complete as per drawing and MORD technical specification 2014 Clause 1204.3.8 including carriage of materials within all leads and lifts and other incidentals as per direction of Engineer-in-Charge. The rate excluding of Goods Service Tax but including labour cess, other levies / taxes, duties , royalties, sale tax, octrori, Toll taxes of local bodies and authorities that the contractor will have to pay for the performance of this contract..

Providng weepholes in plain reinforced concrete abutment wing wall retaining wall return wall and like structure etcetera with 100mm (hundred millimetre ) dia PVC pipes extending through the full width of the structures with slope of 1 (v): 20 (H) towards drawing face complete as per drawing and MORD technical specification 2014 clauses 614, 709, 1204.3.7.including carriage of materials , within all leads and lifts and other incidentals as per direction of Engineer-in-Charge.The rate excluding of Goods Service Tax but including labour cess, other levies / taxes, duties , royalties, sale tax, octrori, Toll taxes of local bodies and authorities that the contractor will have to pay for the performance of this contract..

Providing & making Gabion structure with Mechanically Woven Double Twisted Hexagonal Shaped Wire mesh Gabion Boxes as per IS 16014:2012, MORTH Clause 2500, of required size, Mesh Type 10x12 (ten x twelve)(D=100 mm ( One hundred millimetre ) with tolerance of ± 2%) Zinc coated, Mesh wire diameter 3.0 mm, (three Millimetre) mechanically edged/selvedged with partitions at every 1m (one metre) interval and shall have minimum 10 ( ten) numbers of openings per meter of mesh perpendicular to twist, tying with lacing wire of diameter 2.2mm, (two point two Millimetre) supplied @3% by weight of Gabion boxes, filled with boulders with least dimension of 200 mm, ( Two hundred millimetre ) as per drawing, all complete as per direction of Engineer-in-charge. .including carriage of materials , within all leads and lifts and other incidentals . The rate excluding of Goods Service Tax but including labour cess, other levies / taxes, duties , royalties, sale tax, octrori, Toll taxes of local bodies and authorities that the contractor will have to pay for the performance of this contract..

Scarifying the existing bituminous road surface to a depth of 150 mm (one hundred fifty Millimetre) and disposal of scarified material with in all lead and lift as per Technical Specification Clause 301.4. including carriage of materials , within all leads and lifts and other incidentals as per direction of Engineer-in-Charge. The rate excluding of Goods Service Tax but including labour cess, other levies / taxes, duties , royalties, sale tax, octrori, Toll taxes of local bodies and authorities that the contractor will have to pay for the performance of this contract..

Preparation of sub-grade by dressing to camber (Earth work for the cutting involved for sub-grade to be measured and paid for separately) depending upon the classification of soil complete as per MORD technical specification 2014 / H.P PWD Specification. including carriage of material with in all leads and lifts and other incidental as per the direction of Engineer-in Charge.The rate excluding of Goods Service Tax but including labour cess, other levies / taxes, duties , royalties, sale tax, octrori, Toll taxes of local bodies and authorities that the contractor will have to pay for the performance of this contract..

Consolidation of sub-grade with road roller including making good the undulation etcetera with earth or quarry soil etcetera and re-rolling the sub-grade completed as per MORD technical specification 2014 / H.P PWD Specification. . including carriage of material with in all leads and lifts and other incidental as per the direction of Engineer-in Charge.The rate excluding of Goods Service Tax but including labour cess, other levies / taxes, duties , royalties, sale tax, octrori, Toll taxes of local bodies and authorities that the contractor will have to pay for the performance of this contract..

Construction of granular sub-base by providing local material, spreading in uniform layers with tractor mount grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401 as per MORD technical specification 2014 including carriage of materials within all leads and lifts and other incidentals as per direction of Engineer-in-charge. The rate excluding of Goods Service Tax but including labour cess, other levies / taxes, duties , royalties, sale tax, octrori, Toll taxes of local bodies and authorities that the contractor will have to pay for the performance of this contract..

Construction of granular sub-base by providing well graded material, spreading in uniform layers with tractor mount grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401 as per MORD technical specification 2014 including carriage of materials within all leads and lifts and other incidentals as per direction of Engineer-in-charge. The rate excluding of Goods Service Tax but including labour cess, other levies / taxes, duties , royalties, sale tax, octrori, Toll taxes of local bodies and authorities that the contractor will have to pay for the performance of this contract..

Providing, laying and spreading Lime Treated Soil for Hard Shoulders on a prepared sub grade, pulverising, mixing the spread soil in place with rotavator with 3 (three ) per cent slaked lime with minimum content of 70 (seventy) per cent of CaO, grading with motor grader and compacting with the road roller at OMC to achieve at least 98 (Ninty eight) per cent of the maximum dry density to form a layer of sub base. including carriage of materials within all leads and lifts and other incidentals as per direction of Engineer-in-charge. The rate excluding of Goods Service Tax but including labour cess, other levies / taxes, duties , royalties, sale tax, octrori, Toll taxes of local bodies and authorities that the contractor will have to pay for the performance of this contract..

Providing and fixing, manufactured of cement concrete blocks of size 0.15 m wide x 0.300 m high x 0.450 m long of Cement Concrete (C.C.) M30 garde and fixing on the edge of matelled road to protect the road from edge dropping as per Technical Specification Clause 1503. including carriage of materials within all leads and lifts and other incidentals as per direction of Engineer-in-charge. The rate excluding of Goods Service Tax but including labour cess, other levies / taxes, duties , royalties, sale tax, octrori, Toll taxes of local bodies and authorities that the contractor will have to pay for the performance of this contract..

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and MORD Technical Specification 2014, Clause 406. By Mechanical Means with all leads and lifts as per directed by the Engineer-in-charge. The rate excluding of Goods Service Tax but including labour cess, other levies / taxes, duties , royalties, sale tax, octrori, Toll taxes of local bodies and authorities that the contractor will have to pay for the performance of this contract..

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.00 kg ( Zero point seven - One Kilogram) per square metre using mechanical means as per MORD Technical Specification 2014 Clause 502 including carriage of materials within all leads and lifts and other incidentals as per direction of Engineer-in-charge. The rate excluding of Goods Service Tax but including labour cess, other levies / taxes, duties , royalties, sale tax, octrori, Toll taxes of local bodies and authorities that the contractor will have to pay for the performance of this contract..

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30kg ( Zero point twenty five to zero point Thirty Kilogram) per square meter on the prepared granular surface treated with prepared bituminous surface treated with primer and cleaned with Hydraulic broom as per MORD Technical Specification 2014 Clause 503 including carriage of materials within all leads and lifts and other incidentals as per direction of Engineer-in-charge. The rate excluding of Goods Service Tax but including labour cess, other levies / taxes, duties , royalties, sale tax, octrori, Toll taxes of local bodies and authorities that the contractor will have to pay for the performance of this contract

Providing and laying 50 mm (Fifty milimetre) thick bituminous macadam (VG-30) (Viscosity grade- thirty) with hot mix plant using crushed aggregates of grading with 40-60 TPH batch type HMP producing an average out put of 40 tonnes (forty tonnes) per hour crushed agreegate of specified grading as per Table 500.4 premixed with bituminous binder, transported to site upto any lead and lift , laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per M.O.R.D Technical Specification 2014 Clause 504. including carriage of materials within all leads and lifts and other incidentals as per direction of Engineer-in-charge. The rates excluding of goods Service Tax but including labour cess, other levies / taxes, duties, royalties, sale tax, octrori,Toll taxes of local bodies and authorities that the contractor will have to pay for the performance of this contract.

Providing and laying Semi Dense Bituminouos concrete 25 mm (twenty five milimeter) thick with (VG-30) (Viscosity grade- thirty) 100-120 TPH/ batch type HMP (Hot Mix Plant) producing an average output of 75 tonnes (Seventy five tonne) per hour using crushed aggregate of specfied size premixed eith bituminous binder @ minimum 4.5 to 5.0 (four point five to five ) percent of mix and filler, transporting the hot mix to work site, laying with hysrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled , vibratory and tandem rollers to achieve the desired compaction as per M.O.R.D Technical Specification 2014 Clause 509 complete in all respect . including carriage of materials within all leads and lifts and other incidentals as per direction of Engineer-in-charge. The rates excluding of goods Service Tax but including labour cess, other levies / taxes, duties, royalties, sale tax, octrori,Toll taxes of local bodies and authorities that the contractor will have to pay for the performance of this contract.

Providing and Laying of Interlocking Concrete Block Pavements having thickness 80 mm (eighty millimetre ) as per drawings and Technical Specification Clause 1504. including carriage of materials within all leads and lifts and other incidentals as per direction of Engineer-in-charge. complete in all respects including carriage of materials within all leads and lifts and other incidentals as per direction of Engineer-in-charge. The rate excluding of Goods Service Tax but including labour cess, other levies / taxes, duties , royalties, sale tax, octrori, Toll taxes of local bodies and authorities that the contractor will have to pay for the performance of this contract..

Providing and fixing "Citizen Information Boards" as per specifications and drawings Two MS Plates of 1.60mm (one point six zero millimetre ) thick duly welded with MS angle iron frame 25mmx25mmx5mm (twenty five millimetre X twenty five millimetre X five millimetre )on edges supported with 2Nos (two) horizontal posts made of 75mmx75mm (seventy five millimetre X seventy five millimetre) of 12 SWG Steel tube duly embedded in and including cement concrete M-15 grade blocks of 600mm x600x750mm ( six Hundred milimeter x six hundred milimeter x seven hundred fifty milimeter) below ground level. All MS will be stove enameled both side lettering and printing arrows border etc will be painted with ready synthetic enamel paint of superior quality in required shade and color. all sections of posts and steel tube will be primer and two coats of epoxy point as per drawing. complete in all respects including carriage of materials within all leads and lifts and other incidentals as per direction of Engineer-in-charge. The rate excluding of Goods Service Tax but including labour cess, other levies / taxes, duties , royalties, sale tax, octrori, Toll taxes of local bodies and authorities that the contractor will have to pay for the performance of this contract..

Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.60 mm (one point six zero millimetre ) thick, top and middle plate duly welded with MS flat iron 25mm x 5m (twenty five millimetre X five metre ) size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. (twenty five millimetre X twenty five millimetre X five millimetre ). The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 (two) nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm,(Four Hundred fifty milimeter x four hundred fifty milimeter x Six hundred milimeter), 600mm (Six hundred milimeter) below ground level.The top diamond bloak will be welded to middle plate by 47mm x47mm of 12 SWG steel plate tube. All MS will be stove enameled both side lettering and printing arrows border etc will be painted with ready synthetic enamel paint of superior quality in required shade and color. all sections of posts and steel tube will be primer and two coats of epoxy paint as per drawing and mord cl 1701 and annuxture 1700.1. complete in all respects including carriage of materials within all leads and lifts and other incidentals as per direction of Engineer-in-charge. The rate excluding of Goods Service Tax but including labour cess, other levies / taxes, duties , royalties, sale tax, octrori, Toll taxes of local bodies and authorities that the contractor will have to pay for the performance of this contract..

Providing and place identification signs with size more than 0.9 (zero point nine )square metre size board, providing and erecting direction and place identification retro/reflectories sign as per IRC 67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 , fixed over aluminium sheeting, 2mm (Two millimetre) thick with area exceeding 0.90 (zero point ninety ) square metre. supported on mild steel angle iron posts 75mmx6mm (seventy five x six millimetre ) 2 (two) Nos. firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete, 450mmx450mmx600mm (Four Hundred fifty milimeter x four hundred fifty milimeter x Six hundred milimeter) 600mm ( Six hundred milimeter) below ground level as per approved drawing and Technical Specification Clause 1701 including carriage of materials , within all leads and lifts as per direction of Engineer-in-Charge and as per drawing. complete in all respects including carriage of materials within all leads and lifts and other incidentals as per direction of Engineer-in-charge. The rate excluding of Goods Service Tax but including labour cess, other levies / taxes, duties , royalties, sale tax, octrori, Toll taxes of local bodies and authorities that the contractor will have to pay for the performance of this contract..

Providing and fixing of retro-reflectorised cautionary mandatory sign as per IRC-67 made of ensapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting 1.5mm (one point five millimetre) thick supported on G.I. pipe 50mm (fifty millimeter ) dia firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete, 450mmx450mmx600mm , 600mm (Four Hundred fifty milimeter x four hundred fifty milimeter x Six hundred milimeter), 600mm (Six hundred milimeter) below ground level as per drawing and technical Specification clause 1701, including carriage of materials , within all leads and lifts as per direction of Engineer-in-Charge. and as per drawing. complete in all respects including carriage of materials within all leads and lifts and other incidentals as per direction of Engineer-in-charge. The rate excluding of Goods Service Tax but including labour cess, other levies / taxes, duties , royalties, sale tax, octrori, Toll taxes of local bodies and authorities that the contractor will have to pay for the performance of this contract.. 900mm (nine hundred millimetre )equlateral triangle.

Providing and erecting direction and place identification retro- reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm (Two millimeter) thick with area exceeding 0.9 (zero point nine )square metre supported on RCC Posts 100 mm x 100 mm (one hundred millimetre X one hundred millimetre ) firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 450 mm x 450 mm x 600 mm, (Four Hundred fifty milimeter x four hundred fifty milimeter x Six hundred milimeter), 600mm (Six hundred milimeter) below ground level as per approved drawing and Technical Specification Clause 1701. rate including carriage of materials within all leads and lifts and other incidentals as per direction of Engineer-in-charge. The rate excluding of Goods Service Tax but including labour cess, other levies / taxes, duties , royalties, sale tax, octrori, Toll taxes of local bodies and authorities that the contractor will have to pay for the performance of this contract..

Providing and fixing rainforced cement concrete M-15( M- fifteen )gradewith minimum cement content 275 kg (Two hundred seventy five kilogram) per cubic meter with crushed stone aggregate 20 mm (Twenty Milimeter)nominal size. kilometer stones of standard design as per IRC :8 fixed in position including painting and printing etcetra. as per MORD technical specification 2014 Clause 1703. including carriage of materials within all leads and lifts and other incidentals as per direction of Engineer-in-charge. The rate excluding of Goods Service Tax but including labour cess, other levies / taxes, duties , royalties, sale tax, octrori, Toll taxes of local bodies and authorities that the contractor will have to pay for the performance of this contract..

Precast 5th. Kilometre stone

Precast Ordinary Kilometre stone

200 m stone (precast)

Painting lines, dashes, arrows, etc. on roads with Cold plastic Road Marking Paint conforming to IRC 35:1997 cl. 5.4.2 on bituminous/concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and Technical Specification Clause 1702. including carriage of materials within all leads and lifts and other incidentals as per direction of Engineer-in-charge. The rate excluding of Goods Service Tax but including labour cess, other levies / taxes, duties , royalties, sale tax, octrori, Toll taxes of local bodies and authorities that the contractor will have to pay for the performance of this contract.

Providing and fixing supplying and installation of post delineators (road way indication hazard markers object) markers 80 to 100 cm high above ground level painted black and white in 15 cm wide sripe fitted with 80x100 mm rectangular or 75mm dia circular reflectersed pannels at the top buirried or pressed in to the ground and conferming to IRC 79 and drawing duly powder coated anti-rust and anti theft steel to be installed as per direction of Engineer-incharge. including carriage of materials within all leads and lifts and other incidentals as per direction of Engineer-in-charge. The rate excluding of Goods Service Tax but including labour cess, other levies / taxes, duties , royalties, sale tax, octrori, Toll taxes of local bodies and authorities that the contractor will have to pay for the performance of this contract..

Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro- reflective surface shall be 35 (+/-5) degress to base .The reflective anels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873 part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge. including carriage of materials within all leads and lifts and other incidentals as per direction of Engineer-in-charge. The rate excluding of Goods Service Tax but including labour cess, other levies / taxes, duties , royalties, sale tax, octrori, Toll taxes of local bodies and authorities that the contractor will have to pay for the performance of this contract..

Planting containerzed tree plants including pitting transporting , composting and mulching on slopes 30 to 45 degree, pit size 60 centemetre dia and 60 centimeter depth . Backfill with compost @0.0212 Cum,per pit mixed with original soil. the size of plant should be of appropriate as per dirction of engineer incharge, .including carriage of materials , within all leads and lifts and other incidentals as per direction of Engineer-in-Charge. The rate excluding of Goods Service Tax but including labour cess, other levies / taxes, duties , royalties, sale tax, octrori, Toll taxes of local bodies and authorities that the contractor will have to pay for the performance of this contract..

providing containerzed tree plants including transporting from nursery to site of work , appropriate spacies , the size of plant should be 60cm (sixty centimetre)or as per dirction of engineer incharge, including carriage of materials , within all leads and lifts and other incidentals as per direction of Engineer-in-Charge.The rate excluding of Goods Service Tax but including labour cess, other levies / taxes, duties , royalties, sale tax, octrori, Toll taxes of local bodies and authorities that the contractor will have to pay for the performance of this contract..

Supplying and stacking of well decayed farm yard manure at the site of work as per instructions by the Engineeer- in charge. The Farm yard manure shall be free from earth stone, brick bats and other extraneous stuff. The stacks of F.Y.M. Should be 50 cm in height having volume not less then 3.00 cum. The volume of the stacksshall be reduced by 8% for looseness to arrive at the net quantity for payment.as per direction of Engineer-in-Charge.including carriage of materials within all leads and lifts and other incidentals as per direction of Engineer-in-charge. The rate excluding of Goods Service Tax but including labour cess, other levies / taxes, duties , royalties, sale tax, octrori, Toll taxes of local bodies and authorities that the contractor will have to pay for the performance of this contract..

Bamboo tree guard 1.80 mtr. Hight with 30 cm dia with 4 Nos. verticals strips (length 1.80 mtr. Breadth 30 mm thickness 5mm) further weaving with different smaller size of verticals and circular strips. The weaved portion should be 125 cm having 3 rings at the top, bottom and middle portion. The first ring should be 55 cm above the 4 thick vertical strips i/c strengthening with barbed wire. as per direction of Engineer-in-Charge.including carriage of materials within all leads and lifts and other incidentals as per direction of Engineer-in-charge. The rate excluding of Goods Service Tax but including labour cess, other levies / taxes, duties , royalties, sale tax, octrori, Toll taxes of local bodies and authorities that the contractor will have to pay for the performance of this contract..same.

Routine Maintenance per Km per year (As per Engineer in Chief letter No. PW.WBP/routine maintenance rate/2014-15-897-920 dt. 13/01/2015) as per direction of Engineer-in-Charge.The rate excluding of Goods Service Tax but including labour cess, other levies / taxes, duties , royalties, sale tax, octrori, Toll taxes of local bodies and authorities that the contractor will have to pay for the performance of this contract.same

Frist Year

Second year

Thered year

Fourth Year

Fifth Year