Construction of Community Santiray Complex Near Gadarada, Gadarada Village of Korukonda Mandal., Est. Cost: Rs. 6.00 Lakhs

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH .The rate include all other charges ,Labour charges but excluding Seignorage and GST.

Cement concrete (1:4:8)proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) Machine Crushed graded metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, , all operational, incidental and labour charges such as mixing, laying, curing concrete, etc., complete for finished item of work (APSS No. 402) . The rate include all other charges and but excluding Seignorage and GST.

Filling with Sand Cushion under footings with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyence of water to the work site and all operational & incidental charges, labour charges, etc., complete for finished item of work. (APSS NO. 309 & 310).The rate include all other charges and but excluding Seignorage and GST.

M20 nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm size Hard Blasted Granite (IS383, 1970) Machine Crushed graded metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, , all operational, incidental and labour charges such as mixing, laying, curing concrete, etc., complete for finished item of work (APSS No. 402) The rate include all other charges and but excluding Seignorage and GST. - for footings and pedestal

M20 nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm size Hard Blasted Granite (IS383, 1970) Machine Crushed graded metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, , all operational, incidental and labour charges such as mixing, laying, curing concrete, etc., complete for finished item of work (APSS No. 402) .The rate include all other charges and but excluding Seignorage and GST. - for Plinth Beams

M20 nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm size Hard Blasted Granite (IS383, 1970) Machine Crushed graded metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, , all operational, incidental and labour charges such as mixing, laying, curing concrete, etc., complete for finished item of work (APSS No. 402). The rate include all other charges and but excluding Seignorage and GST. - For Roof Beam

M20 nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm size Hard Blasted Granite (IS383, 1970) Machine Crushed graded metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, , all operational, incidental and labour charges such as mixing, laying, curing concrete, etc., complete for finished item of work (APSS No. 402) The rate include all other charges and but excluding Seignorage and GST. - for Column

M20 nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm size Hard Blasted Granite (IS383, 1970) Machine Crushed graded metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, , all operational, incidental and labour charges such as mixing, laying, curing concrete, etc., complete for finished item of work (APSS No. 402) .The rate include all other charges and contractor profit but excluding Seignorage and GST for roof slabs 150 mm thick.

Brick Masonry in Basement with CM (1:6) prop: using second class bricks from approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site,all operational, incidental and labour charges such as mixing cement mortar, constructing masonry, scaffolding charges, lift charges, curing, etc., complete for finished item of work. (APSS No. 501 & 504).The rate include all other charges and but excluding Seignorage and GST. - For Superstructure

Cement plastering with CM(1:5),12mm thick including cost and conveyance of all the materials ect complete.The rate include all other charges and but excluding Seignorage and GST.

Painting to new walls with 2 coats of plastic emulsion paint of approved brand and shade after thoroughly brushing the surgace to remove all dirt and remains of loose powdered materials, incluldling cost and conveyance of all materials to work site.The rate include all other charges and but excluding Seignorage and GST. for outside and Inside walls

Supply and placing of the HYSD bars, fabrication including cost and conveyance of all the materials etc complete.The rate include all other charges ,Labour charges but excluding Seignorage and GST. For CSC

Supplying and fixing door shutter, with shutter frame and infill panel made from PVC material conforming to IS: 10151-1982, the shutter frame made out of PVC extruded sections having overall dimension of 47 mm x 33 mm with wall thickness of 1.2mm + 0.3mm with usual process variation, the shutter frame with tapered shape to provide better grip to the infill panel end to drain out the water The Infill panel is made out of PVC Sections having Overall Dimensions of 200 mm x 20 mm with wall thickness of 1mm + 0.2mm, the shutter frames mitre cut and joined at the corner, by providing Polymeric “ L” type corners to take hardware & fixtures fixed with 10 20mm counter sunk fully threaded parallel shank steel screws, all the hardware locations reinforced with special polymeric bars as per drawings, stickers showing locations of different hardware pasted on the shutter, the infill panels joined by tongue and groove method.

Supplying & Fixing Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with"P" or "S" trap: 580 mm x 440 mmx260mm.The rate include all other charges ,Labour charges but excluding Seignorage and GST.

Supply, Installation and commissioning approved make floor mounted Close coupled EWC suit CASCADE model 'P' or 'S' trap with dual flush porcelain cistern fixed on EWC with all internal parts of dual flush cistern, ultra solid seat cover of approvedmake with rubber buffer and cap 15 mm angle stop cock 450 mm long PVC inter connection pipe wall flanges all of approved make etc. complete for finished item of work in all respects:White Colour

Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:25561995 with standard C.P. Spreader of overall size 95 x 95 x 57 mm conforming to IS:2556Part6, Sec61974 fixed with screws complete Indian make : 410 x 265 x 305 mm

Supplying & Fixing Indian makeFlat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 630 X 450 mm .The rate include all other charges ,Labour charges but excluding Seignorage and GST.

Supplying & Fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with internal flushing rim fixed with screws complete Indian make conforming to IS:25561995

Supply & fixing of RCC Collars of 900 mm dia for leach fit including Cost and conveyance of all material and all labour charges

Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630(Parts 1to15) of any colour and finish in all shades and Designs set over a base coat of CM (1:8), 12mm thick laid over flooring bed / V.R.C.C. slab, with neat cement slurry of honey like consistency spread at the rate of 3.3 Kgs of cement per Sq.m and jointed with neat white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, ceramic tiles etc. to site,all operational, incidental and labour charges such as mixing of cement mortar, laying, curing, lift charges etc., complete for finished item of work.(APSS No.701 & 707) in All FloorsThe rate include all other charges and but excluding Seignorage and GST. for inside

Providing Skirting to walls with glazed red or white full body ceramic wall tiles of size 300 x 300 mm / 245 mm x 325 mm and thickness 7.30 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and Designs and set over a base coat of CM (1:5), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, etc. to site, such as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished item of work (APSS No.701 & 707) in toiletsThe rate include all other charges and but excluding Seignorage and GST. for inside walls

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of 110mm dia PVC pipe 6 kg/cm2.The rate include all other charges ,Labour charges but excluding Seignorage and GST. 110mm dia PVC pipe 6 kg/cm2

Manufacture, Supply, Delivery and fixing of 110 mm dia Single 'Y' UPVC/SWR Pipe fittings from any equivalent brand that meets the applicable IS / BIS specifications is equally eligible for use with the approval of the compentent authority, with no preference shown to any company

Manufacture, Supply, Delivery and fixing of 110 mm dia 45 Degree Bend UPVC/SWR Pipe fittings from any equivalent brand that meets the applicable IS / BIS specifications is equally eligible for use with the approval of the compentent authority, with no preference shown to any company

Manufacture, Supply, Delivery and fixing of 75 mm dia Single Tee UPVC/SWR Pipe fittings from any equivalent brand that meets the applicable IS / BIS specifications is equally eligible for use with the approval of the compentent authority, with no preference shown to any company

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of 110mm dia PVC pipe 6 kg/cm2.The rate include all other charges ,Labour charges but excluding Seignorage and GST. 75 mm dia PVC pipe 6 kg/cm2

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTMD 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physicalProperties for Hot and Cold Water (IS 15778:2007) -for15.90mm ODPipe SDR 13.5

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTMD 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physicalProperties for Hot and Cold Water (IS 15778:2007) -for 22.20mm ODPipe SDR 13.5

Providing and placing on terrace (at all floor levels) polyetheylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks including cost and conveyance of all materials and labour charges for placing and fixing in position as directed by Engineer-in-Charge.The rate include all other charges ,contractor profit,Labour charges but excluding Seignorage and GST.

Supply and fixing of 2 Core 1.5 Sqm ISI marked, PVC insulated and sheathed FRLS/FRLS-H round copper cable for voltage up to 1100V conforming to IS 694:2010. Makes: As per list of recommended brands as category I. Makes: Finolex / RR kabel / Havells/ Finecab /KEI/Polycab/ Gloster/ Goldmedal/GM// Fortune Arrt/Anchor /Million/Sudhakar/Orbit/Batra Henlay/Salzer

Supply and fixing of 6A / 10A, 3-Pin, 2 Module, Modular Socket with shutter ISI marked conforming to IS 3854:1997 for switches and IS 1293:2019 for plugs and socket-outlets. Makes: As per list of recommended brands as category I. Makes: Legrand (Myrius/Lyncus) / Schneider (Clipsal X/ Livia AB)/ Crabtree (Murano/Athena)/Lauritz Knudsen-entice/enCurve (formerly L&T))/ GM-(Four-Five)/ Goldmedal(GIFA)/North-West(Artisa)/Million (M-VEE) /Anchor Roma (PLUS)/Precision(Series 7) /Honeywell(Blenze pro)/Indoasian(Shynora) /Salzer (diamond series)

Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having System Efficacy of >=100 lumens/watt , PF>0.9, Surge protection: 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as category I. a) LUMINAIRE MAKE : Phillips / GE- Venture / Crompton / Wipro / Bajaj / Havells / Halonix /Jaquar /HPL/GM / GreenLites / Gold Medal/Eveready// Rhino/Panasonic/Ecolink/Capart. b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/ Everlight.

Supplying and fixing of MS Grills including Labour charges or fixing iron doors, iron windows and window grills in position etc., and complete.