Dev. OF CFC at Behrampora, Panchayat Behrampora B, under Scheme ADP(PRI). (2026-27)

P/L dry Stone Soling duly hand packed (Quarry) & consolidated with hand rammers incl. all carriage complete Job.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregates ) with 20 mm nominal size crushed aggregates).

12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand)

Carrying out the wiring of light point/ wall plugs in 1.5 mm pvc copper multi core wire through PVC channel or PVC conduit accessories, including P/F of batton holders round plates, switches, indicators, switch boards, sockets, conduits (wherever necessary) etc. of Havels or equivalent brand. (AC lighting Points- 20 nos, Fan-5nos. Total = 25-nos). Including cost of 16/15 Watt LED surface lights, MCBs, ceiling fans, conduits etc. all as per direction of Engineer-in-Charge-Lighting Points/ Ceiling Fan Points

Carrying out the wiring of heating point in 2.5 mm pvc copper multi core wire through PVC channel or PVC conduit accessories of 660V/1100V. Including switches, switch boards, Sockets, conduits (wherever necessary) etc. of Havels or equivalent brand- Heating Points

Providing and fixing in position collapsible steel shutters with verticalchannels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size,with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers,handles, including applying a priming coat of approved steel primer with enamel paint 2 coats etc.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete size of tile 600mm x 600mm.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick- Interior Surface

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer