T.No.JU/Const./T-04-2025-26-BGKT-PH-II - Development of Maintenance infrastructure (Civil, Mechanical) involving construction of PEB structures for Workshops, Training school and other ancillary works in connection with maintenance cum workshop depot for Vande Bharat Sleeper trains at Bhagat Ki Kothi, Jodhpur as per conditions under WTA-527 (Phase-II).

supply arrangement, drainage & sewerage system, road, fire fighting system, horticulture, landscaping, boundary wall, entry gate, rain water harvesting, 3-D view and any other related drawing etc. complete in all respects as per directions of Engineer-in-Charge. 2360000.0 NS2 1.00 Each Job 2360000.00 AT Par 2360000.00 0 Description:- "Preparation and submission of structural design/drawings duly Proof Checked by IIT

Charge. Scope of work - Service Building for office and Store, Boundary wall/Compound wall, Electric Sub Station, Training and simulator facilities, Construction of Training school, Concrete Road, Drainage system, sewerage system, foundation drawings, catwalk, inspection pit etc. including any other related with project." S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Code Unit Schedule () C-Schedule'C' Non-Schedule items (PEB) 462533495.49 NS1 1950.00 MT 189229.11 368996764.50 AT Par 368996764.50 DYCE-C-I-JU-ENGINEERING/NORTH WESTERN RLY Description:- "Designing, providing, fabricating, painting, transporting, erecting and securing in position structural steelwork for pre-engineered building and workshops complete as per specifications, approved shop drawings and / or instructions. Work under this item would generally cover all structural steelwork in the Buildings/Workshops, including but not being limited to,columns, stanchions, beams, afters, purlins, canopy, steel work for cladding & louvers above 3.60m high from floor level, gantry girders, bracings, catwalk, ladders& stairs inside & outside, provision for fixing

specification of the painting as per special conditions. Work to include all intermediate stages of activities not defined herein, but otherwise implied for completion of work under this item. Note: The above description of item includes the cost of Cost to include but not be limited to, all materials including wastage, all consumables, fasteners of all types for both temporary and permanent stages of work, all temporary stays, labour, temporary works including staging, scaffolding, tools, plant and costs of all incidentals and necessary testing of material, workmanship etc. including cost of painting as per specifications. (for detail description of item please see PDF copy of uploaded Special conditions)" NS2 19630.00 Sqm 3069.20 60248396.00 AT Par 60248396.00 Description:- NS- 2 Providing & fixing of composite insulated panels manufactured in a continuous

trims, ridge capping, accessories & fasteners to ensure and air tight, insulated building which is not only functionally compliant but also aesthetically pleasing with contemporary international look. NS3 1170.00 Sqm 2707.21 3167435.70 AT Par 3167435.70 Description:- Designing, supplying, erecting and fixing in position 3 mm thick polycarbonate sheets of approved make texture and colour for roof lighting. Sheets to be profiled to match metal sheets

include jointing, sealing with Butyl adhesive to make it complete water tight and takes as per manufacturers specifications and cover all cost of labour, tools, plants, temporary works etc all complete. NS4 640.00 Sqm 3758.85 2405664.00 AT Par 2405664.00 Description:- Designing, providing, fabricating, painting, transporting securing in position louvers

thick steel sheet. Cost includes necessary fillers, seals flashing, rubber strip nosing to slats complete in all respects. Payment shall be based on area measured with in frame work of louvers units. NS5 510.00 Sqm 1203.49 613779.90 AT Par 613779.90 Description:- Providing & fixing permanently colour coated trapezoidal profile sheet of depth 28-35 mm deep and 200- 300mm pitch distance with precisely engineered "rib & Flute" design with 950-

sheet (550 MPa yield strength) having a coating of mass of 150 GSM Zn-Al alloy coating as per IS 15961- 2012 finished with 20 micron approved colour coating of Super Durable Polyster XRW coating or equivalent paint, coat on exposed surface over a primer coat of 5 micron and back coat of 5 micron on reverse side over a 5 microns primer coat. NS6 30.00 MT 186962.94 5608888.20 AT Par 5608888.20

requirement conforming to IS: 3443-1980 including supplying and fixing all fixtures viz. rail clips, nut bolts, washers etc. complete in all respect. NS7 60900.00 Kg 225.86 13754874.00 AT Par 13754874.00 7 Description:- Supplying & fixing Pre-Galvanized Mild Steel Diamond Grip Strut Step Sheet NS8 7.00 cum 74747.97 523235.79 AT Par 523235.79 8 Description:- Providing and Laying Grouting Material NS9 1060.00 Metre 325.03 344531.80 AT Par 344531.80

and 25mm depth in both horizontal and vertical lines spaced @ 6m C/C and 4m C/C in VD floor. NS10 60560.00 Kg 43.55 2637388.00 AT Par 2637388.00 10 Description:- Supply and application of chapdur in V.D. Flooring, complete in all respect. NS11 340.00 TRM 12448.64 4232537.60 AT Par 4232537.60 Description:- "Supplying, fabrication, laying fitting & fixing of embedded track (of single rail/SWR type) which includes supply, fabrication cutting & drilling holes and laying of base plate as per approved drawing supplying, fixing of holding down bolt at correct location and alignment at spacing of 750mm (max.) c/c with washers etc. as required, supplying and fixing of guard angles of size

cutting end and drilling two holes at each end, distribution of small track fitting, oiling and greasing of fishplate and fish bolt etc. complete job with contractor labour, material, consumable, equipment, all lead, lift ascend, descend, crossing the track etc as required as per approved drawing. Note:- (1) Rail, fish plate, fish bolt will be supplied by Railway free of cost. (2) Structural steel shall be make SAIL/TISCO/IISCO /RINL/Jindal. The cost include testing of material from approved laboratory by Railways." DYCE-C-I-JU-ENGINEERING/NORTH WESTERN RLY S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Code Unit Schedule () D-Schedule'D' Non-Schedule items (Fire-Fighting) 33261435.00 Please see Item Breakup for details. 1439385.80 AT Par 1439385.80 Description:- NS-1 - Supplying, Laying, jointing, Testing and commissioning of heavy guage M.S.

insertion nuts & bolts including earth work excavating and treating under ground pipe with two coats of tarcoal hot enamel paint and wrapping with bituminised 4 mm thk COATAK reinforced fiber glass tissue complete in all respects as per ISI 10221. (Underground) Please see Item Breakup for details. 24887378.50 AT Par 24887378.50 Description:- NS- 2- Providing, fixing, welding, jointing and testing of heavy class MS pipes as per relevants IS with special accessories Tees, elbows, flanged joints, rubber insertion, nuts, bolts or

suitable flat iron strip clamps/brackets structural members dash faster, civil breakage making good the same etc painting with a primer coat and two coats of postal red enamel etc complete as required. (above ground) NS3 20.00 Each 15663.45 313269.00 AT Par 313269.00

bronze/Gunmetal seal duly ISI marked complete with nuts, bolts, washers, gaskets, confirming to IS:

NS4 60.00 Each 7475.07 448504.20 AT Par 448504.20 Description:- Providing and Fixing weather proof standard hose cabinet (900 mm x 600 mm x 400 mm) out door type suitable for accommodating yard hydrants made of 1.5 mm thick M.S. sheet

primer and two coats of postal red enamel paint suitable for housing 2 Nos. canvas hose pipe and branch pipe. (The cabinet shall be floor mounted on suitable raised platform). The shutters are to be lockable type. The works "hose cabinet " to be painted on the box. NS5 4.00 Numbers 18517.98 74071.92 AT Par 74071.92

joints complete Please see Item Breakup for details. 94854.69 AT Par 94854.69

rubber insertions as required conform to IS: 5312 NS7 5.00 Each 1700.35 8501.75 AT Par 8501.75 7 Description:- Providing and fixing 0-14 kg pressure guage of 150 mm dia NS8 6.00 Each 35025.69 210154.14 AT Par 210154.14 Description:- Supplying and installing cylindrical type air vessel of 250 mm dia, 1.2 m high fabricated out of 8 mm thick MS plate suitable for 7 Kg/sqcm. Working pressure complete with air

welded construction and painted with two coats of postal red enamel out side over a coat of primer and epoxy paint inside. Note: Contractor should submit general arrangement drawings before fabrication of vessel and ultrosonic test report to be submitted on supply of vessel and test to be conducted at the presence of Plumbing-In-Charge. NS9 60.00 Each 11578.72 694723.20 AT Par 694723.20

female instantaneous outlet complete with metal blank cap & chain confirming to IS: 5290 type A with stainless steel orifice plate to keep the pressure hot more than 3.5 kg/sq. cm at any point. NS10 60.00 Each 13359.86 801591.60 AT Par 801591.60

confirming to IS 636-1992 Part-II with gun metal male & female coupling wire wound with pipe as required." NS11 60.00 Each 28552.10 1713126.00 AT Par 1713126.00 Description:- Providing & Fixing first aid hose reel full swinging type with 40 metre long 20 mm dia

and hose tubing to IS: 1532 complete as required including 25 mm dia M.S. pipe connection from riser to hose reel with all sockets, nipples, elbows and 25 mm dia fullway valve as required. NS12 60.00 Each 6591.52 395491.20 AT Par 395491.20

NS13 600.00 Metre 359.92 215952.00 AT Par 215952.00 Description:- Provision for supply , Erection,Testing & commissioning of PVC insulated PVC seathed 13 armoured aluminium cable with lugs, gland and all accessories (a) 3.5 core 35 sq.mm. DYCE-C-I-JU-ENGINEERING/NORTH WESTERN RLY NS14 20.00 Each 13866.01 277320.20 AT Par 277320.20

rubber gasket including matching flanges table "E" in all respects. 100 mm dia NS15 5.00 Each 1107.13 5535.65 AT Par 5535.65

similar make 8 zone fire alarm main indicator control panel, ETRL tested 8 fire hooters & manual call points, all fittings like wiring material, PVC pipe, bend, tee, sidel etc complete in all respect. NS17 5.00 Each 15241.30 76206.50 AT Par 76206.50

Bronze/Gunmetal seal duly ISI marked complete with nuts, bolts, washers, gasket confirming to IS

Please see Item Breakup for details. 609687.50 AT Par 609687.50 Description:- NS-18 - "Supplying , laying & jointing G.I. Pipe (medium) ISI marked {IS: 1239 (Part - I):1990} including followings: a) Supply of cotton thread, white zinc for making pipe joints. b)

Excavation of trenches upto 1 metre deep in all kind of soil which do not required ballasting. e) Keeping pipes level or in prescribed grade for aligning pipes. f) Refilling and ramming trenches after pipes have been tested to required pressure." Please see Item Breakup for details. 249943.40 AT Par 249943.40 Description:- NS-19 - Supplying, laying & jointing G.I. pipe fittings ISI marked (I.S.1789) including

site of work. c) Excavation of trenches upto 1 metre deep in all kind of soil as per items of Earthwork. d) Keeping fittings level or in prescribed grade for aligning pipes. e) Refilling and ramming trenches after fittings have been tested to required pressure. S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Code Unit Schedule () E-Schedule'E' Non-Schedule items (Mechanical) 32449064.26 7473656.2 NS1 1.00 Numbers 7473656.26 AT Par 7473656.26

Description:- EOT Crane (2 Ton)

NS-1 (a) 100 mm dia

NS-1 (b) - 150 mm dia Total 1439385.80 DYCE-C-I-JU-ENGINEERING/NORTH WESTERN RLY NS- 2- Providing, fixing, welding, jointing and testing of heavy class MS pipes as per relevants IS with special accessories Tees, elbows, flanged joints, rubber insertion, nuts, bolts or welded joint with flange joint on bends, 2 length of straight pipe including fixing the pipe with suitable flat iron Item- 2 strip clamps/brackets structural members dash faster, civil breakage making good the same etc painting with a primer coat and two coats of postal red enamel etc complete as required. (above ground) S No. Item No Description of Item Unit Qty Rate Amount

NS-2 (a) - 80 mm dia

NS-2 (b) - 100 mm dia

NS-3(c) - 150 mm dia

NS-2 (d) - 200 mm dia (6.35 mm th IS Metre 3589) Total 24887378.50 NS-6 - Providing and fixing non-return valve complete with bolts, nuts washer & rubber insertions as Item- 6 required conform to IS: 5312 S No. Item No Description of Item Unit Qty Rate Amount

NS-6 (a) - 100 mm dia

NS-6 (b) - (b) 150 mm dia Total 94854.69 NS-18 - "Supplying , laying & jointing G.I. Pipe (medium) ISI marked {IS: 1239 (Part - I):1990} including followings: a) Supply of cotton thread, white zinc for making pipe joints. b) Cutting, threading pipes as and where required. c) Lead of all materials to the site of work. d) Excavation of Item- 18 trenches upto 1 metre deep in all kind of soil which do not required ballasting. e) Keeping pipes level or in prescribed grade for aligning pipes. f) Refilling and ramming trenches after pipes have been tested to required pressure." S No. Item No Description of Item Unit Qty Rate Amount

NS-18(a)- 150 mm dia Total 609687.50 NS-19 - Supplying, laying & jointing G.I. pipe fittings ISI marked (I.S.1789) including followings :-a) Supply of cotton thread, white zinc for making joints. b) Lead of all materials to the site of work. c) Item- 19 Excavation of trenches upto 1 metre deep in all kind of soil as per items of Earthwork. d) Keeping fittings level or in prescribed grade for aligning pipes. e) Refilling and ramming trenches after fittings have been tested to required pressure. S No. Item No Description of Item Unit Qty Rate Amount

NS- 19(a) - G.I. Bend 150 mm dia.

NS- 19(b) - G.I. Elbow 150 mm dia.

NS- 19(c) - G.I. Tee 150mm x 150mm x Each 150mm dia.

NS- 19(d) - G.I. Socket 150 mm dia.

NS- 19(e) - G.I. Reducing Tee 150 mm Each x150 mmx100 mm dia.

NS- 19(f) - G.I. Flange with necessary MS Each nuts & bolts 150 mm dia Total 249943.40