Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹94,517Accepted-AOC | 1 | Accepted-AOC Lowest bid | |
| 2 | 2₹94,674.79+₹157.37 (0.17%)Rejected-AOC | 2 | Rejected-AOC Highest bid |
Tender Value
₹94,517
EMD Value
₹2,363
Closing Date
20 Oct 2023, 6:00 pmClosed
Assistant Executive Engineer
Minor Irrigation Sub Division, Mini Civil Station, IInd Floor, Aranmula
GENERAL-Annual Maintenance Mechanical Works 2023-24-Annual Maintenance to pump motor and accessories to Kulanada LI Scheme- General Civil Work
2023_Irrig_612953_1
IRR/IA/TR/3654/2023_5_6_5/1
Open Tender
Civil Works - Others
Item Rate
180 days
Kulanada
Please see the tender documents
7 documents required · 7 mandatory
₹555
Yes
₹2,363
Yes
29 Nov 2023
13 Oct 2023
25 Oct 2023
13 Oct 2023
20 Oct 2023
13 Oct 2023
Amount
Repairs of Pump and accessories
OD6888/2023-2024: Charges for Dismantling motor and pump from Base plate for 2 nos 40 hp 25 hp motor,1 no 5 Hp vacuum pump and other related accessories from LI Station and conveyed to work shop with the help of chain block, wire sling,coir rope etc. complete as directed by departmental officers at site.Code Description
OD6889/2023-2024:Dismantling Suction and Delivery pipe, bend etc from pipe line and lift pipe line and clearing and washing slurry from pipe and re setting the Suction and Delivery pipe to lines and level with the help of chain block, vadam, wire sling etc.
OD6890/2023-2024:Dismantling and Overhauling sluice valve from pipe line including dismantling,overhauling and resetting the same etc complete.
OD6891/2023-2024:Overhauling existing one 40hp motor, separate the stator and rotor, remove the dust, cleaning with petrol, varnishing the winding with best quality varnish, heating, greasing the bearing, assembling and refitting the same and conducting test run etc complete as per directions of departmental officers at site
OD6892/2023-2024:overhauling existing old oil immersing starter, drain out the oil, cleaning the contacts with kerosene oil, replace the damaged O.C.B()il circuit breaker) contacts including magnetic coil, testing the trial run etc complete
OD6893/2023-2024:Charges for checking 100 Amps main switch, including attending minor repairs such as levelling the leg of unit, cleaning the contacts etc. complete.
OD6894/2023-2024:Charges for dismantling bearing welding and levelling the shaft fabricating and fixing gun metal shaft bush safely with hydraulic press andremachining,greasing the bearing overhauling,assembling,conducting test run etc complete
OD6895/2023-2024:Charges for erecting 1 no 40 Hp motor ,1 No 25 hp motor with corresponding pump and other accessories in correct alignment on bed including providing electric connections and trial running etc complete.
OD6896/2023-2024:Charges for resetting the vaccum pump on correct alignment, including renewing damaged pipe refixing the valve, checking the joints etc complete.
OD6897/2023-2024:Supplying Transformer oil
OD6898/2023-2024:Supplying Good quality nut bolt and washer
OD6899/2023-2024:Supplying 16m2 copper wire
OD6900/2023-2024:Supplying and providing 12 mm Gland Packing
OD6901/2023-2024:Supplying bearing Grease
OD6902/2023-2024:SupplyingSupplying pump oil
OD6903/2023-2024:Supplying Banian Waste
OD6904/2023-2024:Supplying Rubber bush
OD6905/2023-2024:Supplying GM Shaft bush
OD6906/2023-2024:Supplying Oil Seal
OD6907/2023-2024:Supplying Water seal
OD6908/2023-2024:Charges for lift up motor, vacuum pump and all related accessories from ground floor to upper floor safely with the help of chain block,coir rope etc complete, when pumping season is over and as directed by the deptl. officers at site
OD20513/2023-2024:Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer on 300 mm diameter pipes
OD20766/2023-2024:Charge for Supplying plastic table etc complete
OD20767/2023-2024:Charge for Supplying plastic chair etc complete
OD22360/2023-2024:Dismantling 40HP slip ring motor removing all coils form each slot of starter and rotor, cleaning with petrol to each slot of starter and rotor rewinding of the starter and rotor with same SWG copper wire and taping with cotton tape, sleeving re-fixing new lead wire, soldering etc. including varnishing with best quality varnish and heating testing etc.
JB ASSOCIATES PVT LTD
Bidder Name
JB ASSOCIATES PVT LTD
R K BABU
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_916692.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .