Loading
Loading…
Loading…
Tender Value
₹4.8 L
EMD Value
₹9,600
Closing Date
5 Oct 2026, 6:00 pm2d left
Executive Engineer PWD RandB PD III JAMMU
Office of the PWD RandB PROJECT DIVISION III JAMMU
Improvement/Upgradation of Govt. Qtr. No. 26-C Gandhi Nagar, Jammu by way of renovation of kitchen, bathroom including other allied repair works. CNo-295 NP
2026_PWDJK_326342_1
Short e-NIT No. 89 of 2026-2027 Dated 28-09-2026
Open Tender
Civil Works
Percentage
30 days
JAMMU
Please refer Tender documents.
2 documents required · 2 mandatory
₹600
Executive Engineer PWD RandB PD III Jammu
₹9,600
Office of the PWD RandB PROJECT DIVISION III JAMMU
28 Sept 2026
28 Sept 2026
6 Oct 2026
28 Sept 2026
5 Oct 2026
28 Sept 2026
3 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | providing &fixing of ply 19mm thick ply including cutting wasteage fevicol carriage etc for kitchen and almirah LMR | 384 | sft | 200 | ₹76,800 |
| 2 | providing &fixing of ply 6mm thick ply including cutting wasteage fevicol carriage etc complete item of superior make LMR | 256 | sft | 85 | ₹21,760 |
| 3 | providing and fixing of 1mm thick sunmica including cutting wastage ,fevicols nails etc.complete (LMR | 384 | sft | 100 | ₹38,400 |
| 4 | providing and fixing of 0.85mm thick sunmica including cutting wastage,fevicols nails etc.complete (green,amulya,vigro) LMR | 384 | sft | 85 | ₹32,640 |
| 5 | Providing and fixing of 4mm thick ACP sheet incl. all required complete job as directed by EIC | 192 | sft | 70 | ₹13,440 |
| 6 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Sal wood | 0.03 | cum | 1,42,085.65 | ₹4,120.48 |
| 7 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all
complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).Second class D- wood : 35mm thick | 1.39 | sqm | 3,665.8 | ₹5,095.46 |
| 8 | providing and fixing glazed shutter for doors,windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S pressed butt hinges finished of required size with necessary screws 30 mm second class deodar wood | 0.89 | sqm | 4,031.35 | ₹3,587.9 |
| 9 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :Second class deodar wood : 30mm thick | 3 | sqm | 3,788.5 | ₹11,365.5 |
| 10 | Extra for using stainless steel grade 304 wire gauge with wire of dia. 0.5 mm instead of Galvanized M.S. Wire gauge with wire of dia. 0.63 mm for doors, windows and clerestory windows with necessary screws: (shutter area to be measured) | 1.67 | sqm | 142.35 | ₹237.72 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.73 MB
BOQ_1103579.xls
BOQ • 0.37 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .