MCDC OFFICE Interior Works

Amount

Dismantling of Partition brickwork including plastering/ pointing to any depth and width, at all levels or making opening on partion brickwork at all level, of any shape including removal of debris, disposing the same away from the site , loading and unloading, making the surface good etc. complete. Rate shall include for dismanteling of brick walls including plastering/pointing, removal of debris by manual/ mechanical means with necessary tools and plants, scaffolding, cleaning tha surface, preparation of surface. Rate shall include for stacking the serviceable materials and disposing the un serviceable materials/debris away from the site by mechanical means including loading , unloading, cleaning the site etc. complete as directed. Rate include unloading with all leads and lifts.

Demolition of Existing floor tiles with Screeding and carting away the debris from the site and unloading with all leads and lifts as per statutory rules and regulations.

Demolition of Existing brick bat coba of toilet floor and carting away the debris from the site and unloading with all leads and lifts

Demolition of Existing wall tiles with Screeding and carting away the debris from the site and unloading with all leads and lifts as per statutory rules and regulations.

existing furniture (Removal of Existing Cubicles complete with overhead units, under counter storage units and partition panels etc & Removal of Existing continious wooded over head storage unit (please refer existing furniture layout drawing) Rate include unloading with all leads and lifts.

existing ele and hvac (Disconnect all electrical panels,fixtures,door entry System, bulbs,switch Sockets and Distribution Boxes)-(Remove all existing air-conditioning units and deposit as instructed by Client). Rate include unloading with all leads and lifts.

terminating plumbing (Careful dismantling of wash basins, lever taps for cold water for wash basins and flexible PVC drainage pipes in toilets, and reassembly of wash basins at new positions after completion of civil and specialist’s works in the toilets. Wash basins shall be carefully dismantled and neatly stored on site, without damage until the reinstallation. The dismantled taps and PVC pipes shall be transported to the landfill or a place designated by the investor) . Rate include unloading with all leads and lifts.

Pest Control: One plus 2 year warranty Drilling, Filling with termicide solutions and Sealing with white cement. Base of the masonary walls (INTERNAL): Termicide solution chemical barrier as per I.S. Specifications would be created for the termites in the soil. To stop and prevent the movement of termites from the ground; holes are drilled and chemical emulsion injected into the holes under pressure from inside the given premises. The holes shall then be sealed by White Cement Flooring Treatment: flooring application is an integral part of the anti termite treatment as the site is on the ground floor. this treatment is generally done at the slab level, but since current flooring is not removed the drilling method at a distance of 1.5-2 feet will help up percolate some amount of termicide solution into the floor.

Plastering : Providing and plastering 12 to 16mm thk in CM 1:3 to internal wall finished , including raking/ hacking the brick/ RCCsurface,providing and fixing chicken wire mesh at junction of brick and RCC work or making grooves as directed,including scaffolding, curing etc.,complete as directed. With cement mortar 1:3 (1 cement : 3 fine river sand(50 % fine :50% coarse))

Floor Tiles : Providing and laying full vitrified Ceramic Tiles 800x800 mm size, of minimum thickness 8 mm of approved make colour and Model, laid to pattern as per drawing with Grooves. . set in rich cement mortar 1:4, min 20mm thick, including cement slurry complete with cleaning.Rate to include levelling of the existing floor. Rate including 65m thk screeding required for electrical raceway (Basic Rate of tiles shall be Rs. 1000 per Sqm excluding GST)

Toilet Floor Tiles : Providing and laying Anti skid Ceramic Tiles 600x600 mm size, of minimum thickness 8 mm of approved make colour and Model, laid to pattern as per drawing with Grooves. . set in rich cement mortar 1:4, min 20mm thick, including cement slurry complete with cleaning.Rate to include levelling of the existing floor if required. (Basic Rate of tiles shall be Rs. 800 per Sqm excluding GST)

Tile Skirting: Providing and fixing Tiles skirting of 75mm ht approved shade including laying tiles to approved pattern with grooves.

bathroom and pantry Wall tiles: Providing and fixing wall Tiles Ceramic Tile 1200mm X 600 mm of approved shade including laying tiles to approved pattern with grooves. (Basic Rate of tiles shall be Rs. 1100 per Sqm excluding GST)

Pantry Platfrom: Providing and doing 600mm deep platform finish with 20mm thick approved granite with marble frame base fixed on river sand bed with cement slury.finishing with 75mm high granite border fixed with aerolite Granite edge will be mirrior polish.Rates will be inclusive of moulding and mirrior polish (with washbasin below tha counter)

Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete.

Water proofing treatment on Plaster : This shall be 15 mm. thick plaster including an under coat not exceeding 8 mm. thick. Approved water proofing compound like CICO No. 1 or other approved equivalent shall be added @ 3% by weight of cement in cement mortar or as per manufacturers specifications in both the coats. The workmanship and material shall be same as described in plaster work in general. All exposed surfaces shall be finished smooth with a coat of neat cement as directed, except areas where tiling work is to be done, where the plaster shall be left rough / float finish

Water proofing treatment : Providing, supplying, mixing and applying two coats of ready-to-use two- component acrylic polymer, modified cement base, flexible water-proofing slurry or approved equivalent to a thickness of 2 mm over the bottom and sides of the slab / sunken slab. Waterproofing to extend upto 600 on the preiphery walls. Cost to include checking of waterproofing for 48 hours with 300mm high water logged floor. Water proofing with 10 years warranty certificate

100 mm Thk lightweight block Wall : Providing and constructing a 100mm THK Wall using 100mm thk. Aerated Light Weight block of ISI company in APP 600 X 200 X 100mm shape, with 1:4 CM, including all scaffolding, staging, curing, raking of joints for all lifts, etc. complete and as directed. The rate shall include providing scaffolding, all labour, and all other incidental charges, all complete and as directed.

Gypsum Punning : Providing and doing gypsum punning on wall ( average 10-12mm) to make surface smooth and levelled with corner gaurd. The job shall include hacking the existing surface for proper bond. The job shall also include making groove as per drawing. Gyp plaster on brick wall and rcc surface of required thickness to get proper right angle, plumb, line and level . The job shall include wire mesh on joints of RCC & brick wall, making groove as per drawing . Punning will be included prepartion of the surface

Gypsum Ceiling: Gypsum False Ceiling :Providing and fixing suspended false ceiling, which includes providing and fixing GI perimeter channels of size 0.55mm thick having one flange of 20mm and another flange of 30mm and a web of 27mm along with perimeter of ceiling, screw fixed to brick wall/partition with the help of nylon sleeves and screws, at 610mm centers.The suspending GI intermediate channels of size 45mm 0.9mm thick with two flanges of 15mm each from the soffit at 1220mm centers with ceiling angle of width 25mm x10mmx 0.55mm thick fixed to soffit with GI cleat and steel expansion fasteners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clips and in direction perpendicular to the intermediate channel at 457mm centers.12 mm tapered edge MR Ply is then screw fixed to ceiling section with 25mm drywall screws at 230mm centers. Screw fixing is done mechanically either Finally the Gypsum boards are to be jointed and finished so as to have a flush look which includes filling as finishing the tapered and square edges of the boards with jointing compound, paper tape etc. complete including the cost to include making opening forAC grills, light fittings, trap door, making light coves etc. GI channel to be of Diamond frames make with India Gypsum 12mm th. Gyp board

Gypsum Punning With grooves Providing and doing gypsum punning on wall ( average 10-12mm) to make surface with 4mm groove smooth and levelled with corner gaurd. The job shall include hacking the existing surface for proper bond. The job shall also include making groove as per drawing. Gyp plaster on brick wall and rcc surface of required thickness to get proper right angle, plumb, line and level . The job shall include wire mesh on joints of RCC & brick wall, making groove as per drawing . Punning will be included prepartion of the surface

Light Gala Cutting

Providing & fixing of 3" astal / prince PVC pipes including all PVC fittings like tees, elbows, bends, unions, coupling, reducer tees, collars etc. The work shall include cutting jointing with solvent cement pressure testing the joints / pipeline for 10 kg/sq.cm hydraulic pressure, for 2 hours etc. making holes, including chasing in solid block masonry walls with groove cutting machine to required width and depth, making bores in walls, clearing the debris, grouting of concealed pipes, MS hooks for fixing pipes and making good the walls and floors complete as required.

Providing & fixing of 2 " astal / prince PVC pipes including all PVC fittings like tees, elbows, bends, unions, coupling, reducer tees, collars etc. The work shall include cutting jointing with solvent cement pressure testing the joints / pipeline for 10 kg/sq.cm hydraulic pressure, for 2 hours etc. making holes, including chasing in solid block masonry walls with groove cutting machine to required width and depth, making bores in walls, clearing the debris, grouting of concealed pipes, MS hooks for fixing pipes and making good the walls and floors complete as required.

Providing & fixing of 1 1/2 " astal / prince PVC pipes including all PVC fittings like tees, elbows, bends, unions, coupling, reducer tees, collars etc. The work shall include cutting jointing with solvent cement pressure testing the joints / pipeline for 10 kg/sq.cm hydraulic pressure, for 2 hours etc. making holes, including chasing in solid block masonry walls with groove cutting machine to required width and depth, making bores in walls, clearing the debris, grouting of concealed pipes, MS hooks for fixing pipes and making good the walls and floors complete as required.

Providing & fixing of 4" astal / prince PVC pipes including all PVC fittings like tees, elbows, bends, unions, coupling, reducer tees, collars etc. The work shall include cutting jointing with solvent cement pressure testing the joints / pipeline for 10 kg/sq.cm hydraulic pressure, for 2 hours etc. making holes, including chasing in solid block masonry walls with groove cutting machine to required width and depth, making bores in walls, clearing the debris, grouting of concealed pipes, MS hooks for fixing pipes and making good the walls and floors complete as required.

Providing & fixing of 3/4" astal / prince UPVC pipes including all UPVC fittings like tees, elbows, bends, unions, coupling, reducer tees, collars etc. The work shall include cutting jointing with solvent cement pressure testing the joints / pipeline for 10 kg/sq.cm hydraulic pressure, for 2 hours etc. making holes, including chasing in solid block masonry walls with groove cutting machine to required width and depth, making bores in walls, clearing the debris, grouting of concealed pipes, MS hooks for fixing pipes and making good the walls and floors complete as required.

Providing & fixing of 1" astal / prince UPVC pipes including all UPVC fittings like tees, elbows, bends, unions, coupling, reducer tees, collars etc. The work shall include cutting jointing with solvent cement pressure testing the joints / pipeline for 10 kg/sq.cm hydraulic pressure, for 2 hours etc. making holes, including chasing in solid block masonry walls with groove cutting machine to required width and depth, making bores in walls, clearing the debris, grouting of concealed pipes, MS hooks for fixing pipes and making good the walls and floors complete as required.

Providing, fixing, testing and commissioning of EWC wall mounted type White Vitreous Chinaware Water Closet with ('P' / 'S' Trap), complete with flush valve, CP bolts, white seat cover, CP Elbow, CP wall flange, angular stop cocks with flange (for health faucet), health faucet with necessary CP flexible hose 750mm long nozzle, C I brackets. Model No:- Hindware Product No. 92566 element plus white matte

Providing, fixing, testing and commissioning of counter wash basin top installed on existing counter with MS brackets, one no 15mm dia CP angle stop cock with wall flange , 32 mm dia CP waste coupling, 32 mm dia CP brass bottle trap. Model No: Hindware 10069

Providing and fixing pillar cock of approved make and model Model No: FON-CHR-40011

Providing and fixing 2 way bib cock with jet spray of approved make and model Model:Jaquar Fonte Series

angle cock (Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality) model no- F360006RGD

Providing and fixing stainless steel sink size of 600 x 510 x 200 mm including all necessary fittings. Model- Nirali

Providing and fixing SS nahni trap with cover of approved make and model Size Of Nahni Trap : 150 x 150 mm Model : Chilly trap

Providing and fixing C.P. Angular stop cock with wall flange of approved make continental including necessary sockets/union nut etc. complete model no-Hindware F280004CP Angular Stop Cock (Flora) with Chrome Finish

Providing and fixing soap dispensor approved make and model Model: Euronics ES 18

Providing and fixing Toilet Paper roll of approved make and model Model: SS jumbo rolle tissue paper Dispenser

Providing and fixing tissue paper Holder approved make and model Model: Euronics Ep 01

Providing and fixing hand dryer approved make and model Euronics EH24S Ultra Thin Steel Hand Dryer

DISTRIBUTION BOARD MAIN DISTRIBUTION BOARD (MDB) 12 Way TPN DB with Metal Door (Legrand Ekinox 507748 12 Way DPX3160 VTPN MCCB Distribution Board) Incomer : 1No. Legrand 125 Amp 4 Pole MCCB 25 kA - 420056 Outgoing : 1 No. 40A, TPN , 25 KA, MCB./ 04 No. 63 A, TPN,25KA Outgoing : 1 No. 70A, TPN , 25 KA, MCB./ 04 No. 63 A, TPN,25KA Outgoing : 1 No.10A, TPN , 25 KA, MCB./ 04 No. 63 A, TPN,25KA

LIGHTING POWER DISTRIBUTION BOARD (LDB) MINIMUM 20 Way TPN DB with Metal Door ( Legrand Ekinox 507673 12 Way TPN Distribution Board ) Incomer : 1No. 10A,TPN,25 KA MCB. 3 No. 40A, DP ,100 mA RCCB Out going : 10 Nos. 6A SP MCB of 'C' curve.

HVAC / POWER DISTRIBUTION BOARD (HVACDB)MINIMUM 24 Way TPN DB with Metal Door (Legrand Ekinox 507673 12 Way TPN Distribution Board )

MINIMUM 24 Way TPN DB with Metal Door (Legrand Ekinox 507673 12 Way TPN Distribution Board ) Incomer : 1No. 70A,TPN,25 KA MCB.3 No. 40A, DP ,100 mA RCCB 3 No. 40A, DP ,100 mA RCCB Out going : 06 Nos. 6A SP MCB of 'C' curve. 3 Nos. 12 A SP MCB of 'C' curve. 9 Nos. 10A SP MCB of 'C' curve.

RAW POWER DISTRIBUTION BOARD (PDB) MINIMUM 30 Way TPN DB with Metal Door ( Legrand Ekinox 507672 8 Way TPN Distribution Board ) Incomer : 1No. 40A,TPN,25 KA MCB. 3 No. 40A, DP ,100 mA RCCB Out going : 14 Nos. 6A SP MCB of 'C' curve.

L.T. CABLES Supply,and laying of Power cables 1100 V Grade, Copper or Aluminium Conductors-multi-strand construction, of only approved make:Laying rates to include for all required Cable Clamps, Cable Identification Tags at required intervals,& other items like cable ferrules / cable-tags at each end of the cables laid. For the same Cross Sectional area of Cables, laying rates shall be the same whether it is Copper or Aluminium conductor cables, or whether it is XLPE or PVC insulation Similarly, laying rates shall be the same for Armoured & Un- armoured Cables of the same Cross section. Cable trays will be measured separately. IS No 7098, Part 1- XLPE Cables IS No 1554, Part 1, 1988- PVC Cables, IS 694: 1990 SINGLE CORE COPPER CABLES. 4 core XLPE insulated, Al. conductor Armored cables. 4 c/ 50 sq.mm. Al. Armoured (Main panel to Main DB)

GI EARTHING CONDUCTOR Supply laying and termination of the following sizes of earth flats and wires laid / on Cable trays/ drawn through pipe sleeves along with column/ walls for safety earthing as per specifications. All joints in the runs of the conductor shall be welded. All weld joints shall be protected with bitumen paint. The equipment tape connections shall be bolted using galvanized hardware. 8 SWG GI wire

CIRCUIT MAINS Wiring of Submains / circuit mains shall be concealed or surface conduit system in MS conduits with 1100 V grade FRLS copper multistrand flexible wires for Phase, neutral & earth complete. Rates quoted shall include supply of conduits, wires & other conduiting accessories. Circuit mains shall be measured from respective DB to the nearest control switch & for looping from switch / socket to another switch / socket board. Colour coding shall be used for conduits to differentiate lighting, RP, lighting circuits & point wiring. All circuit terminations shall be provided with solder less crimping type copper sockets / lugs & ferrules indicating source code on load side & load code on source side. There shall not be any joints in the circuits, only looping is allowed in terminal blocks & in switches / socket outlets. 1 runs of 2.5 sq.mm copper 3 core wire in Celing Raceways / 20 mm dia PVC Presision make conduit for lighting circuit main. The Race Ways / Conduit shall be measured seprately.

CIRCUIT MAINS Wiring of Submains / circuit mains shall be concealed or surface conduit system in MS conduits with 1100 V grade FRLS copper multistrand flexible wires for Phase, neutral & earth complete. Rates quoted shall include supply of conduits, wires & other conduiting accessories. Circuit mains shall be measured from respective DB to the nearest control switch & for looping from switch / socket to another switch / socket board. Colour coding shall be used for conduits to differentiate lighting, RP, lighting circuits & point wiring. All circuit terminations shall be provided with solder less crimping type copper sockets / lugs & ferrules indicating source code on load side & load code on source side. There shall not be any joints in the circuits, only looping is allowed in terminal blocks & in switches / socket outlets. 3 runs of 1.5 sq.mm copper single core wire in Celing Raceways / 20 mm dia PVC Presision make conduit for lighting circuit main. The Race Ways / Conduit shall be measured seprately.

Tray Supply,Installation of prefabricated hot deep galvanised ( 460 gms per sq. met.), ladder type cable trays of minimum 2.5 mm thick as per details given in Drawing. Prefabricated, bends and couplers with G.I. Nuts and bolts. Gas cutting of cable trays at site is not permitted. If any welding is to be done on cable trays, the welded part shall be touched up with anti- corrosive primer and silver paint. The running rate shall include bends and couplers. Cable tray supports shall be paid extra. 200 x 25 mm wide cable tray perforated type

Tray Supply,Installation of prefabricated hot deep galvanised ( 460 gms per sq. met.), ladder type cable trays of minimum 2.5 mm thick as per details given in Drawing. Prefabricated, bends and couplers with G.I. Nuts and bolts. Gas cutting of cable trays at site is not permitted. If any welding is to be done on cable trays, the welded part shall be touched up with anti- corrosive primer and silver paint. The running rate shall include bends and couplers. Cable tray supports shall be paid extra. 150 x 25 mm wide cable tray perforated type

Conduit Supply & Installation of PVC heavy duty conduit with all conduit accessories like pull wire, couplings, smooth bends, junction boxes etc. for concealed wiring or surface wiring. This including junction , couplings and screw. 20 MMm conduit

PVC Trunking PVC Trunking (casing capping) ISI mark, 1.2 mm thick, 100 mm width and above depending on No. of wires to be drawn; with double locking arrangement, 1.8mm thick push-fit joints/ accessories for PVC trunking such as couplers, elbows, internal / external angles, junction boxes of required ways of the same make. Cassing patti - 100 x 100 MM

LIGHTING FIXTURE Light fixtures with electronic balast complete with accessories like contl gear box low loss (<5W) ballast, HPF condensor ( PF shall be >0.85), energy efficient high lumen output FTL / CFL lamps, transformers etc., . Rate shall include necessary mounting bracket & lamps.

LIGHTING FIXTURE Light fixtures with electronic balast complete with accessories like contl gear box low loss (<5W) ballast, HPF condensor ( PF shall be >0.85), energy efficient high lumen output FTL / CFL lamps, transformers etc., . Rate shall include necessaryLight fitting - Philips make - round 12W led panel light

LIGHTING FIXTURE Light fixtures with electronic balast complete with accessories like contl gear box low loss (<5W) ballast, HPF condensor ( PF shall be >0.85), energy efficient high lumen output FTL / CFL lamps, transformers etc., . Rate shall include necessary 12" X 12" SQQUARE EXE FAN

LIGHTING FIXTURE Light fixtures with electronic balast complete with accessories like contl gear box low loss (<5W) ballast, HPF condensor ( PF shall be >0.85), energy efficient high lumen output FTL / CFL lamps, transformers etc., . Rate shall include necessary 24 IN DIA COUNCLED CEILING FAN

POINT WIRING Wiring of Light points, 6A socket outlets shall be of 25 mm dia PVC Pipe with accessories and with 3 runs of 2.5 sq.mm FRLS insulated copper wire with modular type switches with metal/PVC boxes, cover plates and accessories. The point wiring shall be terminated in a terminal block inside the junction box. The looping shall be done only at terminal blocks provided in the light fixtures or separate terminal blocks. All switches including front plate & frame which will be mounted on the metal boxes shall have removable film coat to protect from scratches & paint during installation. One (1) light points controlled by a 10 A switch.

POINT WIRING Wiring of Light points, 6A socket outlets shall be of 25 mm dia PVC Pipe with accessories and with 3 runs of 2.5 sq.mm FRLS insulated copper wire with modular type switches with metal/PVC boxes, cover plates and accessories. The point wiring shall be terminated in a terminal block inside the junction box. The looping shall be done only at terminal blocks provided in the light fixtures or separate terminal blocks. All switches including front plate & frame which will be mounted on the metal boxes shall have removable film coat to protect from scratches & paint during installation. Two (2) light points controlled by a 10 A switch.

POINT WIRING Wiring of Light points, 6A socket outlets shall be of 25 mm dia PVC Pipe with accessories and with 3 runs of 2.5 sq.mm FRLS insulated copper wire with modular type switches with metal/PVC boxes, cover plates and accessories. The point wiring shall be terminated in a terminal block inside the junction box. The looping shall be done only at terminal blocks provided in the light fixtures or separate terminal blocks. All switches including front plate & frame which will be mounted on the metal boxes shall have removable film coat to protect from scratches & paint during installation. Three (3) light points controlled by a 10 A switch.

POINT WIRING Wiring of Light points, 6A socket outlets shall be of 25 mm dia PVC Pipe with accessories and with 3 runs of 2.5 sq.mm FRLS insulated copper wire with modular type switches with metal/PVC boxes, cover plates and accessories. The point wiring shall be terminated in a terminal block inside the junction box. The looping shall be done only at terminal blocks provided in the light fixtures or separate terminal blocks. All switches including front plate & frame which will be mounted on the metal boxes shall have removable film coat to protect from scratches & paint during installation. Four - Six (4 to 6 ) light points controlled by a 10 A switch./MCB

FLOOR RACEWAYS Trough shaped base, made of Aluminium suitable to lay in raised floor with all accessories like blankind lids,mounting lids, end caps, Floor chipping for the raceway installation in floor shall be covered . All edges/ cut faces shall be free from burrs & shall be smooth.Rate shall include floor chipping / wall chasing & plastering, clamping / fixing etc.All related civil works with respect this work under raceways item scope 100mm x 35mm Al Raceway.

FLOOR RACEWAYS Trough shaped base, made of Aluminium suitable to lay in raised floor with all accessories like blankind lids,mounting lids, end caps, Floor chipping for the raceway installation in floor shall be covered . All edges/ cut faces shall be free from burrs & shall be smooth.Rate shall include floor chipping / wall chasing & plastering, clamping / fixing etc.All related civil works with respect this work under raceways item scope 50mm x 35mm Al Raceway.

FLOOR RACEWAYS Trough shaped base, made of Aluminium suitable to lay in raised floor with all accessories like blankind lids,mounting lids, end caps, Floor chipping for the raceway installation in floor shall be covered . All edges/ cut faces shall be free from burrs & shall be smooth.Rate shall include floor chipping / wall chasing & plastering, clamping / fixing etc.All related civil works with respect this work under raceways item scope 300 x 300 MM junction with SS-304 cover plate

FLOOR RACEWAYS Trough shaped base, made of Aluminium suitable to lay in raised floor with all accessories like blankind lids,mounting lids, end caps, Floor chipping for the raceway installation in floor shall be covered . All edges/ cut faces shall be free from burrs & shall be smooth.Rate shall include floor chipping / wall chasing & plastering, clamping / fixing etc.All related civil works with respect this work under raceways item scope 200 x 200 MM junction with SS-304 cover plate

FLOOR RACEWAYS Trough shaped base, made of Aluminium suitable to lay in raised floor with all accessories like blankind lids,mounting lids, end caps, Floor chipping for the raceway installation in floor shall be covered . All edges/ cut faces shall be free from burrs & shall be smooth.Rate shall include floor chipping / wall chasing & plastering, clamping / fixing etc.All related civil works with respect this work under raceways item scope 150 x 150 MM junction with SS-304 cover plate

SOCKET OUTLETS The quoted rate for power sockets outlets shall include : Socket outlets - round / round cum flat / flat multi pin, switches, 14SWG metal boxes with knockout on all sides, front plate of required colours with accessories. The front plate edges to be curved. All switch / sockets shall be provided with printed labels / stickers indicating source code. Colour code for Lighting /Rawpower /HVAC socket plates : As per requirement All switch / sockets including front plate & frame which shall be mounted on the metal boxes and same shall have removable film coat to protect from scratches & paint during installation. 2 No's 6 A, round pin colored socket outlet controlled by a 16 amps switch for workstaion monitor and charger and bellow the workstaion additional socket for CPU this socket controlled 6 amps switch. (Universal Socket )

SOCKET OUTLETS The quoted rate for power sockets outlets shall include : Socket outlets - round / round cum flat / flat multi pin, switches, 14SWG metal boxes with knockout on all sides, front plate of required colours with accessories. The front plate edges to be curved. All switch / sockets shall be provided with printed labels / stickers indicating source code. Colour code for Lighting /Rawpower /HVAC socket plates : As per requirement All switch / sockets including front plate & frame which shall be mounted on the metal boxes and same shall have removable film coat to protect from scratches & paint during installation. 1 No. 6/16A, round pin colored socket outlet controlled by a 16A SP switch on a common switch plate.

SOCKET OUTLETS The quoted rate for power sockets outlets shall include : Socket outlets - round / round cum flat / flat multi pin, switches, 14SWG metal boxes with knockout on all sides, front plate of required colours with accessories. The front plate edges to be curved. All switch / sockets shall be provided with printed labels / stickers indicating source code. Colour code for Lighting /Rawpower /HVAC socket plates : As per requirement All switch / sockets including front plate & frame which shall be mounted on the metal boxes and same shall have removable film coat to protect from scratches & paint during installation. 1 No. 6 A, round pin colored socket outlet controlled by a 6A SP switch on a common switch plate.

LAN/TELEPHONE SYSTEM Supply, installation of telephone, LAN outlets, telephone terminal boards, MDF/ IDF units as per approved makes. Cat-6 cable for Lan /telephone/WIFI with 25 MM Pricision PVC conduit

LAN/TELEPHONE SYSTEM Supply, installation of telephone, LAN outlets, telephone terminal boards, MDF/ IDF units as per approved makes. Back Boxes suitable for 2 No's of RJ45 socket outlets Suitable for modular type cover.

LAN/TELEPHONE SYSTEM Supply, installation of telephone, LAN outlets, telephone terminal boards, MDF/ IDF units as per approved makes. tel phone point

LAN/TELEPHONE SYSTEM Supply, installation of telephone, LAN outlets, telephone terminal boards, MDF/ IDF units as per approved makes. SI of Server rack -15U and configuration with power guard

18U with adjustable front and rear vertical rackmount rails Depth of 33" allow for standard server installation. Locking, reversible front/rear doors and locking, removable side panels. Fully assembled for quick installation. Casters and leveling feet. Meets all enclosure requirements towards PCI DSS (Payment Card Industry Data Security Standard) compliance. Access point-WIFI

Cisco Business 140AC 802.11ac 2x2 Wave 2 Access Point 1 GbE Port- Ceiling Mount, Limited Lifetime Protection (CBW140AC-B) Network switch Cisco 24 port

Cisco Business 140AC 802.11ac 2x2 Wave 2 Access Point 1 GbE Port- Ceiling Mount, Limited Lifetime Protection (CBW140AC-B) Patch Panel – 24 Port CAT 6

EPABX S-TECH EPABX Machine CS432 for 4 Main Lines and 32 Extentions Telephone Intercom System Design. Rate including crone box and all work

Weather proof box-IP67 -Legrand make -HVAC ODU Unit ,32 Amps -2 Pole MCB-D class-1 No's-Legrand

HDMI cable server to MAIN cabin

Access control- Access control device with top notch

Cassette INVERTER Air-conditioners Supply of Ceiling mounted Cassette Air-conditioners complete with copper condensers evaporative indoor units & Condensing Outdoor unit, Inverter type suitable for R32/R410a 3.0TR Ceiling mounted Cassette unit

Cassette INVERTER Air-conditioners Supply of Ceiling mounted Cassette Air-conditioners complete with copper condensers evaporative indoor units & Condensing Outdoor unit, Inverter type suitable for R32/R410a 2.5TR Ceiling mounted Cassette unit

Hi-wall INVERTER Air-conditioners Supply of wall mounted Cassette Air-conditioners complete with copper condensers evaporative indoor units & Condensing Outdoor unit, Inverter type suitable for R32/R410a 2.0TR Hiwall split air-conditioners

Hi-wall INVERTER Air-conditioners Supply of wall mounted Cassette Air-conditioners complete with copper condensers evaporative indoor units & Condensing Outdoor unit, Inverter type suitable for R32/R410a 1.0TR Hiwall split air-conditioners

LOW SIDE WORKS Installation, Testing & Commissioning of above Cassette Air-conditioning units with customer satisfaction at site 1.0TR split ac

LOW SIDE WORKS Installation, Testing & Commissioning of above Cassette Air-conditioning units with customer satisfaction at site 3.0TR Ceiling mounted Cassette unit

LOW SIDE WORKS Installation, Testing & Commissioning of above Cassette Air-conditioning units with customer satisfaction at site 2.0TR Hiwall split air-conditioners

LOW SIDE WORKS Installation, Testing & Commissioning of above Cassette Air-conditioning units with customer satisfaction at site 2.5TR Ceiling mounted Cassette unit

SITC of copper refrigerant piping (suction and liquid line) of various sizes suitable for Cassette unit Soft copper piping necessary supports, fittings, 9mm thick insulation class "O" sleeve

SITC of Copper Electrical communication cabling between indoor and out door units

SITC of drain piping of PVC with 6 mm thick nitrile foam insulation & all fittings, supports and clamps up to 50 mm dia.25 mm dia

SITC of drain piping of PVC with 6 mm thick nitrile foam insulation & all fittings, supports and clamps up to 50 mm dia. 32 mm dia

SITC of drain piping of PVC with 6 mm thick nitrile foam insulation & all fittings, supports and clamps up to 50 mm dia. 40 mm dia

SITC of drain piping of PVC with 6 mm thick nitrile foam insulation & all fittings, supports and clamps up to 50 mm dia. 50 mm dia

Refrigerant Gas TAP off for ac units

Supply & Installation of MS Out Door Frame works for with primer and balck double coat paint for Cassette unit

Loading, unloading , transport, civil works for making civil jari, opening hole etc. except core cut

Fire Alarm panel 1. The fire alarm control panel (FACP) shall be suitable for Class-A Style 5, 6 or 7 wiring and Class–B Style 4 type of wiring as per NFPA-72. 2. It shall have provision to accept the range of 110V - 230V ± 10% single phase, 50 Hz SMPS supply. 3. The processor shall be of M3 32 bit, capability for Day & Night mode. 4. The panel shall maintain 2000 events, each with a time and date stamp. 5. The control panels shall exclusively maintain 1000 alarm event and 1000 other events (troubles supervisory pre alarm etc.). 6. The system shall support three password levels, (i.e. Advance / Admin/ user). 7. It shall have inbuilt USB 2.0 Interface for easy configuration facility via PC/Laptop. 8. The FACP shall have Minimum 160 Characters LCD in which the LCD clearly indicates the location of fire, Fault & Supervisory. 9. The FACP should have capacitive Touch Keypad, instead of mechanical snap dome switches for trouble free operation. 10. The panel shall have degraded operating mode. In case of main CPU failure the panel still gives audio and visual notification. 11. The FACPs shall have maximum capacity of four loops and can be configurable as one, two, three and four loop. Smoke Sensor Detector: 1. Detector shall be UL approved. 2. It shall have smoke sensitivity of 1.9 +/- 0.6 %/ft. 3. The Detector shall be loop powered and addressed by DIP switches. 4. All the detectors shall have a visible dual blinking LED to indicate the healthiness/ trouble/ alarm condition of the detector. The LED shall be located in such a way that it shall be visible from the 360º. 5. It shall possess False alarm immunity and a superior signal to noise ratio. 6. It shall be capable of supporting style 7 wiring. 7. It shall have inbuilt drift compensation facility. 8. In case of a failure, panel shall allow to replace the detector with the same type without the need of additional programming. (Conventional fire protection control system type DET-CCD-104 Detnov, for 4zones, option to connect 32 detectors per zone, with alarm and fault relay output,two supervised siren outputs with adjustable delay (0-10 minutes), day-nightoperation regime) Manual Pull Stations: The Manual Pull Stations shall conform to the relevant standards having the following features. 1. It shall easily replaceable break glass rod. 2. It shall be of single gang mounting. 3. It shall be connected thru the Monitor module for addressing facility. 4. It shall Made of High quality Nontoxic-die casting. Sounder : The Sounder shall confirm to the relevant standards having the following features. 1. It shall be a Conventional sounder. (Bidder shall consider external power supply, cable, conduits, modules required for activating externally powered sounders and include the costing as part of the item – Sounders) 2. It shall have audibility level of 85dB 3. It shall have the capability of being tested from the FACP. Fire Alarm Panel 2 zone SITC of Fire Alarm Panel

Smoke Detector/HEAT SITC of Smoke Detector.(Supply, Installation,Testing & Commisioning of Analog Addressable Intelligent multisensor detector ( VDS / UL /ERTL/ LPCB / FM approved ) with inbuilt optical smoke sensors as well as additional heat detector sensor with decentralise intelligence, soft addressable Photothermal type with inbuilt fault isolator as per NFPA style 7 wiring complete with base having IP as per recommended standard)

Mcp - Manual Call Point

Hooter SITC of Hooter

Armoured Cable 1.5 Sq mm X 2 Core (ISI) for Fire Alarm System

Ceiling Painting : Providing and applying 3 coats of Luster Paint of approved make (Asian Paints)on walls wherever advised after primer Coat of given approved of shade and Given gradients. The surface shall be thoroughly cleaned and prepared by river sand papering and applying putty to achieve smooth and truly levelled surface. Required number of coats and type of primer as prescribed by manufacture shall be applied before the application of finishing coat as recommended by manufacturers' specifications.

Wall Painting : Providing and applying texture Paint of approved make (Asian Paints / Zink Paint/ Standard)on walls wherever advised after primer Coat of given approved of shade and Given gradients. The surface shall be thoroughly cleaned and prepared by river sand papering and applying putty to achieve smooth and truly levelled surface. Required number of coats and type of primer as prescribed by manufacture shall be applied before the application of finishing coat as recommended by manufacturers' specifications.

Linear Workstation: As per Design Given By Architect (As per Approved laminate) (size 1.15 m x .6 m x .75 m ht) Table Top-Supplying 25mm thk marin plywood top with 2mm lipping on front side and other 0.8mm, with wire manger hole with laminate finish. Providing top with all necessary fittings and keyboard holder below the table table. Vertical-Supplying 19mm thk marin plywood below the table top to act as vertical base laminate finish with all necessary fittings. Switch Points- 3 switch and socket point above table top and 2 switch and socket and data and voice point at skirting level

Cubical Workstation : As per Design Given By Architect (As per Approved laminate) (1.6 m x .6 m x .75 m ht) Table Top-Supplying 25mm thk marin plywood top with 2mm lipping on front side and other 0.8mm, with wire manger hole with laminate finish. Providing top with all necessary fittings and keyboard holder below the table table. Vertical-Supplying 19mm thk marin plywood below the table top to act as vertical base laminate finish with all necessary fittings. Switch Points- 3 switch and socket point above table top and 2 switch and socket and data and voice point at skirting level

Side Credenza: As per architect design (with 2/3 drawers and 2/3 shutters)(As per Approved laminate) Supply of storage unit made up of 15mm thk plywood with laminate fnish from all sides with openable shutter made out of 15mm thk plywood/block wood laminate finish inside loose shelf with necessary fittings.(1mX0.75m)

Executive Desk: (3.1 m x 1.2 m ) size As per architect design (As per Approved laminate) Supplying 25mm thk plywood laminate finish top. 2mm lipping on front side and other 0.8mm. with front side apron Providing top with all necessary fittings with 25mm thk plywood laminate finish below the table top to act as vertical base with all necessary fittings

Cabin Desk: (size 1.5 m x .8 m) As per architect design (As per Approved laminate) Supplying 25mm thk plywood laminate finish top. 2mm lipping on front side and other 0.8mm. with front side apron Providing top with all necessary fittings with 25mm thk plywood laminate finish below the table top to act as vertical base with all necessary fittings

Back Credenza: As per Architect Design (As per Approved laminate) size (height will be .75 m and depth will be .4 m ) Supply of storage unit made up of 25mm thk plywood with laminate finish from all sides with openable shutter made out of 15mm thk plywood/block wood with laminate finish inside loose shelf with necessary fittings.

55 mm thk modular partitons (Minimum 60-65 mm thk modular partition frame work made out of CRCA MS of grade D minimum thickness of 1.5 mm powder coated 50 microns frame work designed to carry out electrical power & computer wiring in 2 different race ways with a separation of at least 300mm between them including necessary slots. The frame work consists of minimum two vertical upright a top horizontal section, bottom section and intermediate sections (minimum 40 mm x 30 mm) The frame structure covering and Top trim / side trim made out of Aluminum with powder coating (50 microns). All Aluminum Horizontal and vertical sections are extruded from AA 6063 American standard alloy with 12 HRC hardness of Architectural grade (IS 10259:1982) of 18 gauge minimum. The thicknesses of extruded sections vary based on its design and its point load bearing design engineering. The skinning / panels / tiles to be of 9mm thk Prelaminated particle Board (Grade II & Type-II ,IS 12823: 1990; Reaffirmed 2005) till 1200mm height from the floor level for outside facia. Inside facia = fabric panel with soft board with minimum 9mm thickness above table top (450 mm height). 9mm thk Prelaminated particle board panel finished with 0.8mm thk laminate from floor level to top of table top (750 mm height). The edges to be capped (as per approved design and drawing) Aluminum end trim with powder coating. Cost to include that for provision of fixing switches & the necessary cut out for the same. The height of the partition to be 1200mm. As per drawing & direction complete with all standard fittings & fixtures, leveling screws etc. Cost to include the supporting system to partitions & walls such as brackets / fasteners / joining posts / aluminum race ways 2 nos / wire management cleats / runners etc.)

a. Installation of 10 cameras at desired locations covering the entrance to all the floors. b. Supply of items mentioned in BoM, F.O.R destination. c. The equipment/materials should be under 2 year’s comprehensive warranty from the date of successful delivery & installation. d. All the products and their warranty certificates shall be issued in Authorized Person e. All cameras should be Anolog based. f. The Analog Based Video Surveillance system shall be a Hybrid System with distributed architecture having control station at the administrative department/Control Office & Viewing facility at the security cabin/Installation Incharge room /Any other area envisaged. h. The proposed Solution should allow to officials to locally and centrally monitor its facilities from a remote location on a Portable/Fixed personal computer monitor. i. The Solution should capture, store, and analyze digital video images to enable central monitoring, increase operational efficiency, reduce liability, minimize risk and secure people & property. j. After commissioning the Video surveillance system, the same shall be demonstrated for all its capabilities to the relevant user department to make them familiar with the system on mutually agreed dates. k. Once the supply order is placed, it will be the vendors’ responsibility to make the project functional. Any additional cost incurred for completing the project and for which the vendor has not bid at the time of submission of the final offer will be borne by the vendor. l. The CCTVs Surveillance System need to be functional on 24x7 basic i.e. 24 hours all the days and need to have at least 30 days data storage capacity for all CCTVs. m. Completion Certificate: Work Completion certificate shall be issued only after completion of work in all respect as per RFP and to the entire satisfaction of Sakkar Bhavan. Analog Dome camera with power supply

DVR-CP -Plus CP PLUS CP-UVR-0801E1-CS 1080P

Hard disk with 1 TB

4 + 1 cable with PVC conduit

Glass Partition: Providing and fixing 12mm thk toughened glass height of 2400mm fixed in teak wood partition 600mm ht x 75mm using 12mm thk marin plywood with 1 mm thk laminate (approved) finshed, fixed on ceiling with steel or metal screw and aluminium channel will be fixed inside the finish floor

Single Glass Door:(0.9 X 2.4) Providing & fixing in position Single shutter glass door 12mm thick clear toughened glass shutters with polished edge will be fixed with s.s patch fittings & double action floor spring with s.s cover plate, with include s.s handle & patch lock etc complete.

Single Glass Door:(0.75 X 2.4) Providing & fixing in position Single shutter glass door 12mm thick clear toughened glass shutters with polished edge will be fixed with s.s patch fittings & double action floor spring with s.s cover plate, with include s.s handle & patch lock etc complete.

Boardroom table: Providing and fixing 25mm-36mm thk Laminate Aproved Laminate Finish Top with powder Coated Ms Legs.

Reception table: Providing and fixing 16mm-18mm thk machine mirror polished italian marble slab with special coating of approved colour and approved texture with 4 mm thk veneer (approved) with 100% glossy polish with top, side, bottom, verticals in 12 &19mm thk plywood as per detail drawing

Flush door with frame (8m x 2.4) As per Approved laminate Providing and installing Single leaf solid core shutter made from 35-40mm thick block board. The wooden frame of Sal wood of size 150 mm x 75 mm , treated with anit termit trement and finihsed with laminate from all side .The external surfaces of the shutter to be finished in 1mm thick laminate on both side. Work to be completed with necessary hinges, Lock, Handle, door closer/Floor Spring,Single leaf one side openable door, laminate finish (Toilet main doors will not have lock) Toilet Flush Doors will have louvers of size 600 x 200 mm. Toilet Lobby door will have Vision panel of size 200 x 300 mm. (Basic Rate of laminate shall be Rs. 2000 per sheet excluding GST)

Flush door with frame (1m x 2.4) As per Approved laminate Providing and installing Single leaf solid core shutter made from 35-40mm thick block board. The wooden frame of Sal wood of size 150 mm x 75 mm , treated with anit termit trement and finihsed with laminate from all side .The external surfaces of the shutter to be finished in 1mm thick laminate on both side. Work to be completed with necessary hinges, Lock, Handle, door closer/Floor Spring,Single leaf one side openable door, laminate finish (Toilet main doors will not have lock) Toilet Flush Doors will have louvers of size 600 x 200 mm. Toilet Lobby door will have Vision panel of size 200 x 300 mm. (Basic Rate of laminate shall be Rs. 2000 per sheet excluding GST)

Flush Door with old frame: As per Approved laminate Providing and installing Single leaf solid core shutter made from 35-40mm thick block board. The external surfaces of the shutter to be finished in 1mm thick laminate on both side. Work to be completed with necessary hinges, Lock, Handle, door closer/Floor Spring,Single leaf one side openable door, laminate finish (Toilet main doors will not have lock) Toilet Flush Doors will have louvers of size 600 x 200 mm. Toilet Lobby door will have Vision panel of size 200 x 300 mm. (Basic Rate of laminate shall be Rs. 2000 per sheet excluding GST)

White Glass Partition: Providing and fixing 12mm thk toughened glass height of 2400mm fixed in teak wood partition 600mm ht x 75mm using 12mm thk marin plywood with 1 mm thk laminate (approved) finshed, fixed on ceiling with steel or metal screw and aluminium channel will be fixed inside the finish floor

Window niche storage: Providing and constructing storage of size as per drawings, with top, sides and bottom in 19mm thick with single shelf

3 Seat Sofa

Back Drop Treatment for Reception with logo: Providing and fixing 6mm thk back painted glass fixed on 12mm marin plywood box of thickness of 100mm with fillet corner with stud at reception back with indirect cove lighting

Frosting film on glass: Providing and fixing 3M™ Crystal™ Glass Finishes – Frosted (the “Product”) provides the lookof sandblasted or etched glass at a fraction of the cost. Digital printing on this material provides both customization and personalized designoptions. This permanent, pressure-sensitive film has a transparent syntheticliner for easy cutting of logos or designs. The Product can be appliedto glass, acrylic, or polycarbonate substrates.

Roller Blinds : Providing and fixing Roller blinds ( 50 % black out ) of chain operated roller system

Door Matte: p & fixing doormat of std brand as per design and approval of architects

SS steel Toilet Dustbin With Laid Size : (Dia 250mm) -

Good quality plastic Cabins Dustbin Without Laid Size : (Dia 250mm)

Good quality plastic Conference room Dustbin Without Laid Size : (Dia 250mm with 600mm ht)

Mirror : Providing and fixing 6mm thk Mirror with stainless steel edge framing, the edges of the mirror to be mirror polished and fixed with silicon on12mm thk. Ply with teakwood edging . The Material to be approved by Architect/engineer.

ABC Stored Pressure multipurpose Fire Extinguisher - Powder Coated MS body, Squeeze type Value, Pressure Gauge, Filled with ABC Powder As per IS:14609 with ISI Mark Complete with all Accessories as Per IS:13849 With ISI Mark, suitable for Class 'A','B','C' & Electrical Fires - 5 KG - DCP

Co2 Fire Extinguisher filled with Co2 gas as per IS:15222 with control discharge mechanism (wheel type valve) fitted with 1mtr. EPDM hose and horn applicable on class, B & C electrically started fire with rating of 21B confirms to IS:15683 bearing seamless Co2 cylinder as per IS:7285 with PESO. (Petroleum and Explosive Safety Organization) approval bearing ISI & CE mark. Brand Capacity - 4.5 Kg

ADARSH INFRAINTERIO PVT LTD

Innovative Interior