REPAIR MAINT OF GI WATER SUPPLY PIPE LINE AT PRC MES ASC TEMPLE LANE AND LEKHA NAGAR UNDER GE RAMGARH

Amount

Excavation in trenches in soft & loose soil not exceeding 1.5 metre deep and not exceeding 1.5 mtr width and getting out soil including forming bottom surface to required slope/gradient for laying cables/pipes,foundations,laying of cable, shafts, well, cesspits, manholes etc. complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers of not exceeding 25 cm thick after the cables & pipes etc. are laid, jointed & tested and foundations complete all as specified and directed by Engineer-in-Charge.

Removal of surplus excavated spoil not exceeding 50 Mtr distance and depositing where directed by Engineer-in-Charge at a level not exceeding 1.5 m above the starting point complete all as specified.

M & L for laying plain cement concrete (1:2:4),type B-2( using 40 mm graded crushed stone aggregate) for supporting of CI/DI/GI pipes 0.60 RM below ground level and upto 5 RM above the ground level with smooth finishing without using extra cement, complete all as specified and as directed.

Taking up and down GI tubing including GI fittings complete from trenches/wall/ceiling /floor suitable for 15mm dia pipe, complete all as specified and as directed.

Taking up and down GI tubing including GI fittings complete from trenches/wall/ceiling/ floor suitable for 20mm dia pipe, complete all as specified and as directed.

Taking up and down GI tubing including GI fittings complete from trenches/wall/ceiling/ floor suitable for 25mm dia pipe, complete all as specified and as directed.

Taking up and down GI tubing including GI fittings complete from trenches/wall/ceiling/ floor suitable for 40/50mm dia pipe, complete all as specified and as directed.

Taking up and down GI tubing including GI fittings complete from trenches/wall/ceiling /floor suitable for 100/80 mm dia pipe, complete all as specified and as directed.

Relaying/refixing of GI tubing 15 mm dia of any grade ,laid in trenches, after cleaning, rethreading the old screw thread with replacement of unservicable fittings and fixtures complete all as specified and as directed. Note:G I pipe obtained from item No. 05 here-in-before.

Relaying/refixing of GI tubing 20 mm dia of any grade ,laid in trenches, after cleaning, rethreading the old screw thread with replacement of unservicable fittings and fixtures complete all as specified and as directed. Note:G I pipe obtained from item No. 06 here-in-before.

Relaying/refixing of GI tubing 25 mm dia of any grade ,laid in trenches, after cleaning, rethreading the old screw thread with replacement of unservicable fittings and fixtures complete all as specified and as directed. Note:G I pipe obtained from item No. 07 here-in-before.

Relaying/refixing of GI tubing 40 mm dia of any grade ,laid in trenches, after cleaning, rethreading the old screw thread with replacement of unservicable fittings and fixtures complete all as specified and as directed. Note:G I pipe obtained from item No. 08 here-in-before.

Relaying/refixing of GI tubing 50 mm dia of any grade ,laid in trenches, after cleaning, rethreading the old screw thread with replacement of unservicable fittings and fixtures complete all as specified and as directed. Note:G I pipe obtained from item No. 08 here-in-before.

S&F for GI water tubing medium grade, ISI marked, galvanised, 15 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) laid in trenches and ceiling or laid in floors complete all as specified & directed.

S&F for GI water tubing medium grade, ISI marked, galvanised, 20 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) laid in trenches and ceiling or laid in floors complete all as specified & directed.

S&F for GI water tubing medium grade, ISI marked, galvanised, 25 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) laid in trenches and ceiling or laid in floors complete all as specified & directed.

S&F for GI water tubing medium grade, ISI marked, galvanised, 40 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) laid in trenches and ceiling or laid in floors complete all as specified & directed.

S&F for GI water tubing medium grade, ISI marked, galvanised,50 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) laid in trenches and ceiling or laid in floors complete all as specified & directed.

S&F for GI water tubing medium grade, ISI marked, galvanised, 80 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) laid in trenches and ceiling or laid in floors complete all as specified & directed.

S&F for GI water tubing medium grade, ISI marked, galvanised, 100 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) laid in trenches and ceiling or laid in floors complete all as specified & directed.

S&F for GI water tubing medium grade, ISI marked, galvanised, 15 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) fixed to walls and ceiling or laid in floors complete all as specified & directed.

S&F for GI water tubing medium grade, ISI marked, galvanised, 20 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) fixed to walls and ceiling or laid in floors complete all as specified & directed.

S&F for GI water tubing medium grade, ISI marked, galvanised, 25 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) fixed to walls and ceiling or laid in floors complete all as specified & directed.

S&F for GI water tubing medium grade, ISI marked, galvanised, 40 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) fixed to walls and ceiling or laid in floors complete all as specified & directed.

S&F for GI water tubing medium grade, ISI marked, galvanised, 50 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) fixed to walls and ceiling or laid in floors complete all as specified & directed.

S&F for GI water tubing medium grade, ISI marked, galvanised, 80 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) fixed to walls and ceiling or laid in floors complete all as specified & directed.

Repair to leakage broken pipe or in joints or in sluice valves (flanged/spigot socket joints) of existing pipe (supply and distribution mains) CI/DI/GI pipes of sizes 300 mm/200 mm/150 mm/100 mm/80 mm bore by earth work (excavation, returning filling, removal in any type of soil) and fixing necessary suitable sizes of new (ISI marked) spares fittings i.e (flanged/spigot tail pieces, collars, Tee, bend, to repair the leakage complete all as specified and directed by Engr-in-Charge. Note: (1) Cost of spares fittings be deemed to include in unit rate quoted by bidder (2) Excavation and earthwork shall be included in unit rate quoted by bidder. (3) cost of all T&P shall be included in quoted rates (4) Cost of lead joint, spun yarn, gland packing etc., shall be measured and paid for separately under relevant items of schedule.

S & F gun metal globe or gate valve of 15 mm dia with iron wheel head screwed both ends ISI marked fixed to GI pipe including dismantling/taking down of old unserviceable one, complete all as specified and as directed.

S & F gun metal globe or gate valve of 20 mm dia with iron wheel head screwed both ends ISI marked fixed to GI pipe including dismantling/taking down of old unserviceable one, complete all as specified and as directed.

S & F gun metal globe or gate valve of 25 mm dia with iron wheel head screwed both ends ISI marked fixed to GI pipe including dismantling/taking down of old unserviceable one, complete all as specified and as directed.

S & F gun metal globe or gate valve of 40 mm dia with iron wheel head screwed both ends ISI marked fixed to GI pipe including dismantling/taking down of old unserviceable one, complete all as specified and as directed.

S & F gun metal globe or gate valve of 50 mm dia with iron wheel head screwed both ends ISI marked fixed to GI pipe including dismantling/taking down of old unserviceable one, complete all as specified and as directed.

M & L for Run lead joint for CI pipe pipe including spun yarn etc.,for spigot and socket pipes and fittings for 80 mm bore, including clauking the spun yarn, complete all as specified and as direced.

M & L for Run lead joint for CI pipe pipe including spun yarn etc.,for spigot and socket pipes and fittings for 100 mm bore, including clauking the spun yarn, complete all as specified and as direced.

M & L for Run lead joint for CI pipe pipe including spun yarn etc.,for spigot and socket pipes and fittings for 150 mm bore, including clauking the spun yarn, complete all as specified and as direced.

M & L for Run lead joint for CI pipe pipe including spun yarn etc.,for spigot and socket pipes and fittings for 200 mm bore, including clauking the spun yarn, complete all as specified and as direced.

M & L for Run lead joint for CI pipe pipe including spun yarn etc.,for spigot and socket pipes and fittings for 250 mm bore, including clauking the spun yarn, complete all as specified and as direced.

M & L for Run lead joint for CI pipe pipe including spun yarn etc.,for spigot and socket pipes and fittings for 300 mm bore, including clauking the spun yarn, complete all as specified and as direced.

S & F cast iron sluice valve 150mm dia, with stainless steel spindle and cast iron hand wheel complying with IS:14846-2000, class PN 1.6 both ends flanged with 2 Nos rubber insertion gasket joints, nuts, bolts and washers of required size and Nos, complete including removing /taking down of old unserviceable one, complete all as specified and as directed.

S & F cast iron sluice valve 100 mm dia, with stainless steel spindle and cast iron hand wheel complying with IS:14846-2000, class PN 1.6 both ends flanged with 2 Nos rubber insertion gasket joints, nuts, bolts and washers of required size and Nos, complete including removing of old unserviceable one, complete all as specified and as directed.

S & F cast iron body and brass gate heavy duty Non Return Valve (NRV), 150 mm dia, ISI marked, both ends flanged with 2 Nos rubbers insertion gasket joints, nuts, bolts and washers of required size and Nos complete including removing /taking down of old unserviceable one, complete all as specified and as directed.

S & F Cast iron body and brass gate heavy duty Butterfly valve 100 mm dia, ISI marked, both ends flanged with 2 Nos rubbers insertion gasket joints, nuts, bolts and washers of required size and numbers, complete including removing old unserviceable one, complete all as specified and as directed.

Repair CI sluice valve with flanged ends, cast iron body flanged and drilled end non rising type including replacement of brass spindle with nuts, gland cap, CI wheel suitable for 100mm bore, rubber gasket, bolts and nuts, washers etc., complete all as specified and as directed.

Repair CI sluice valve with flanged ends, cast iron body flanged and drilled end non rising type including replacement of brass spindle with nuts, gland cap, CI wheel suitable for 150mm bore, rubber gasket, bolts and nuts, washers etc., complete all as specified and as directed.

Repair CI sluice valve with flanged ends, cast iron body flanged and drilled end non rising type including replacement of brass spindle with nuts, gland cap, CI wheel suitable for 200mm bore, rubber gasket, bolts and nuts, washers etc., complete all as specified and as directed.

Repair CI sluice valve with flanged ends, cast iron body flanged and drilled end non rising type including replacement of brass spindle with nuts, gland cap, CI wheel suitable for 250mm bore, rubber gasket, bolts and nuts, washers etc., complete all as specified and as directed.

M & L for Cast Iron fittings for spigot and socketed CI pipes for water mains upto 80 mm bore, such as bends (any type, radius and angle) tapers any type (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs,including taking down existing cast iron fittings complete all as specified and as directed.

M & L for Cast Iron fittings for spigot and socketed CI pipes for water mains for 100 mm bore, such as bends (any type, radius and angle) tapers any type (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs, including taking down existing cast iron fittings complete all as specified and as directed.

M & L for Cast Iron fittings for spigot and socketed CI pipes for water mains for 150 mm bore, such as bends (any type, radius and angle) tapers any type (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs, including taking down existing cast iron fittings complete all as specified and as directed.

M & L for Cast Iron fittings for spigot and socketed CI pipes for water mains for 200 mm bore, such as bends (any type, radius and angle) tapers any type (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs, including taking down existing cast iron fittings complete all as specified and as directed.

Supply only of alage control solution complete all as specified and as directed.

Supply only of copper sulphate of approved qulaity complete all as specified and as directed.

Supply only of soda Ash of approved qulaity complete all as specified and as directed.

Supply and mix potash alum crystal ( fitkari ) suitable for purification of swimming pool water in the form of solid lumps /slabs from the manufacurer having valid BIS certificate as specified in table -1 of IS : 299-2012 complete all as specified and as directed.

Supply only of alumIna ferric (Grade-1) suitable for purification of drinking water in the form of solid lumps /slabs from the manufacurer having valid BIS certificate as specified in table -1 of IS : 299-2012 complete all as specified and as directed. Note: Each block of alum supplied by the contractor should have a marking indicating weight of the slab and manufacturering date and be in proper packing.The contractor shall submit the latest report from anf Govt approved lab of the alumina ferric supplied.

Supply only of calcium Hypo Chlorite ganular in facory sealed HDPE container (45 Kg of each pack) decomposing at 177 ⁰ C, Mol wt - 142.98, Toxicity: Oral rat LD : 850mg/Kg having chlorination concentration level 65% to 70% complete all as specified and directed. (Note:- for item No. 52,53,54,56 & 57 unit weight of item No. 52 ,53, 54, 56 & 57 of BOQ will be measured & paid through as per B.O.O)

AASHIRWAD ENTERPRISES

ranjit singh

Bidder Name

simplex infra project